Biocide resistance in Klebsiella pneumoniae: a narrative review

Klebsiella pneumoniae is among the World Health Organization's list of priority pathogens, notorious for its role in causing healthcare-associated infections and neonatal sepsis globally. Containment of K. pneumoniae transmission depends on the continued effectiveness of antimicrobials and of biocides used for topical antisepsis and surface disinfection. Klebsiella pneumoniae is known to disseminate antimicrobial resistance (AMR) through a large auxiliary genome made up of plasmids, transposons and integrons, enabling it to evade antimicrobial killing through the use of efflux systems and biofilm development. Because AMR mechanisms are also known to impart tolerance to biocides, AMR is frequently linked with biocide resistance (BR). However, despite extensive research on AMR, there is a gap in knowledge about BR and the extent to which AMR and BR mechanisms overlap remains debatable. The aim of this paper is to review and summarise the current knowledge on the determinants of BR in K. pneumoniae and highlight content areas that require further inquiry.

Disinfectants and antiseptics: mechanisms of action and resistance

Chemical biocides are used for the prevention and control of infection in health care, targeted home hygiene or controlling microbial contamination for various industrial processes including but not limited to food, water and petroleum. However, their use has substantially increased since the implementation of programmes to control outbreaks of methicillin-resistant Staphylococcus aureus, Clostridioides difficile and severe acute respiratory syndrome coronavirus 2. Biocides interact with multiple targets on the bacterial cells. The number of targets affected and the severity of damage will result in an irreversible bactericidal effect or a reversible bacteriostatic one. Most biocides primarily target the cytoplasmic membrane and enzymes, although the specific bactericidal mechanisms vary among different biocide chemistries. Inappropriate usage or low concentrations of a biocide may act as a stressor while not killing bacterial pathogens, potentially leading to antimicrobial resistance. Biocides can also promote the transfer of antimicrobial resistance genes. In this Review, we explore our current understanding of the mechanisms of action of biocides, the bacterial resistance mechanisms encompassing both intrinsic and acquired resistance and the influence of bacterial biofilms on resistance. We also consider the impact of bacteria that survive biocide exposure in environmental and clinical contexts.

Fabrication and characterization of new levan@CBD biocomposite sponges as potential materials in natural, non-toxic wound dressing applications

Wound healing is a complex process; therefore, new dressings are frequently required to facilitate it. In this study, porous bacterial levan-based sponges containing cannabis oil (Lev@CBDs) were prepared and fully characterized. The sponges exhibited a suitable swelling ratio, proper water vapor transmission rate, sufficient thermal stability, desired mechanical properties, and good antioxidant and anti-inflammatory properties. The obtained Lev@CBD materials were evaluated in terms of their interaction with proteins, human serum albumin and fibrinogen, of which fibrinogen revealed the highest binding effect. Moreover, the obtained biomaterials exhibited antibacterial activity against Staphylococcus aureus and Pseudomonas aeruginosa, as well as being non-hemolytic material as indicated by hemolysis tests. Furthermore, the sponges were non-toxic and compatible with L929 mouse fibroblasts and HDF cells. Most significantly, the levan sponge with the highest content of cannabis oil, in comparison to others, retained its non-hemolytic, anti-inflammatory, and antimicrobial properties after prolonged storage in a climate chamber at a constant temperature and relative humidity. The designed sponges have conclusively proven their beneficial physicochemical properties and, at the preliminary stage, biocompatibility as well, and therefore can be considered a promising material for wound dressings in future in vivo applications.

Biocides in the Hospital Environment: Application and Tolerance Development

Hospital-acquired infections are a rising problem with consequences for patients, hospitals, and health care workers. Biocides can be employed to prevent these infections, contributing to eliminate or reduce microorganisms' concentrations at the hospital environment. These antimicrobials belong to several groups, each with distinct characteristics that need to be taken into account in their selection for specific applications. Moreover, their activity is influenced by many factors, such as compound concentration and the presence of organic matter. This article aims to review some of the chemical biocides available for hospital infection control, as well as the main factors that influence their efficacy and promote susceptibility decreases, with the purpose to contribute for reducing misusage and consequently for preventing the development of resistance to these antimicrobials.

Anti-Fouling Properties of Phosphonium Ionic Liquid Coatings in the Marine Environment

Biofouling is the buildup of marine organisms on a submerged material. This research tests the efficacy of phosphonium ion gels comprising phosphonium monomers ([P444VB][AOT] and [P888VB][AOT]) and free ionic liquid ([P4448][AOT], [P88814][AOT]) (10 to 50 wt%), varying copper(II) oxide biocide concentrations (0 to 2 wt%), and the docusate anion [AOT]- for added hydrophobicity. The efficacy of these formulations was tested using a seachest simulator protected from light and tidal currents in New Zealand coastal waters over the summer and autumn periods. Anti-fouling performance was correlated with the hydrophobicity of the surface (water contact angle: 14-131°) and biocide concentration. Formulations with higher hydrophobicity (i.e., less free ionic liquid and longer alkyl chain substituents) displayed superior anti-fouling performance. The presence of the copper(II) biocide negatively affected anti-fouling performance via significant increases to hydrophilicity. No correlation was observed between antimicrobial activity and anti-fouling performance. Overall, phosphonium ion gels show potential for combining anti-fouling and foul release properties.

Evaluating the efficacy of endolysins and membrane permeabilizers against Vibrio parahaemolyticus in marine conditions

Endolysins have garnered significant attention as a potential alternative to antibiotics in aquaculture, mainly for combating Vibrio spp., Gram-negative pathogens responsible for infectious outbreaks. However, endolysin effectiveness against Gram-negative bacteria is limited due to the outer membrane's poor permeability. The combat against marine pathogens poses an additional challenge of finding endolysins that retain their activity in high ionic strength conditions. Thus, this study aimed to demonstrate that certain endolysins retain muralytic activity in seawater and also evaluated outer membrane permeabilizers as endolysin adjuvants. The effectiveness of KZ144 and LysPA26 endolysins, along with EDTA and oregano essential oil, was evaluated against Vibrio parahaemolyticus ATCC-17802 in natural seawater. Results revealed the muralytic activity of both endolysins in seawater. However, the endolysins appeared to counteract the permeabilizers' effect during the initial bactericidal assays. Further investigations revealed that the observed effect was not antagonistic. After the permeabilizer action, V. parahaemolyticus likely used endolysins as a growth substrate. Endolysins may not play an indifferent role if they fail to exert a bactericidal effect. Instead, they can serve as a substrate for fast-growing bacteria, such as V. parahaemolyticus, increasing bacterial density. It should be considered a potential drawback of endolysins' proteinaceous nature as bactericidal agents.

Antibacterial and Antifungal Terpenes from the Medicinal Angiosperms of Asia and the Pacific: Haystacks and Gold Needles

This review identifies terpenes isolated from the medicinal Angiosperms of Asia and the Pacific with antibacterial and/or antifungal activities and analyses their distribution, molecular mass, solubility, and modes of action. All data in this review were compiled from Google Scholar, PubMed, Science Direct, Web of Science, ChemSpider, PubChem, and library searches from 1968 to 2022. About 300 antibacterial and/or antifungal terpenes were identified during this period. Terpenes with a MIC ≤ 2 µg/mL are mostly amphiphilic and active against Gram-positive bacteria, with a molecular mass ranging from about 150 to 550 g/mol, and a polar surface area around 20 Ų. Carvacrol, celastrol, cuminol, dysoxyhainic acid I, ent-1β,14β-diacetoxy-7α-hydroxykaur-16-en-15-one, ergosterol-5,8-endoperoxide, geranylgeraniol, gossypol, 16α-hydroxy-cleroda-3,13 (14)Z-diene-15,16-olide, 7-hydroxycadalene, 17-hydroxyjolkinolide B, (20R)-3β-hydroxy-24,25,26,27-tetranor-5α cycloartan-23,21-olide, mansonone F, (+)-6,6'-methoxygossypol, polygodial, pristimerin, terpinen-4-ol, and α-terpineol are chemical frameworks that could be candidates for the further development of lead antibacterial or antifungal drugs.

Quaternary ammonium disinfectants and antiseptics: tolerance, resistance and potential impact on antibiotic resistance

BACKGROUND

Due to the substantial increase in the use of disinfectants containing quaternary ammonion compounds (QACs) in healthcare and community settings during the COVID-19 pandemic, there is increased concern that heavy use might cause bacteria to develop resistance to QACs or contribute to antibiotic resistance. The purpose of this review is to briefly discuss the mechanisms of QAC tolerance and resistance, laboratory-based evidence of tolerance and resistance, their occurrence in healthcare and other real-world settings, and the possible impact of QAC use on antibiotic resistance.

METHODS

A literature search was conducted using the PubMed database. The search was limited to English language articles dealing with tolerance or resistance to QACs present in disinfectants or antiseptics, and potential impact on antibiotic resistance. The review covered the period from 2000 to mid-Jan 2023.

RESULTS

Mechanisms of QAC tolerance or resistance include innate bacterial cell wall structure, changes in cell membrane structure and function, efflux pumps, biofilm formation, and QAC degradation. In vitro studies have helped elucidate how bacteria can develop tolerance or resistance to QACs and antibiotics. While relatively uncommon, multiple episodes of contaminated in-use disinfectants and antiseptics, which are often due to inappropriate use of products, have caused outbreaks of healthcare-associated infections. Several studies have identified a correlation between benzalkonium chloride (BAC) tolerance and clinically-defined antibiotic resistance. The occurrence of mobile genetic determinants carrying multiple genes that encode for QAC or antibiotic tolerance raises the concern that widespread QAC use might facilitate the emergence of antibiotic resistance. Despite some evidence from laboratory-based studies, there is insufficient evidence in real-world settings to conclude that frequent use of QAC disinfectants and antiseptics has promoted widespread emergence of antibiotic resistance.

CONCLUSIONS

Laboratory studies have identified multiple mechanisms by which bacteria can develop tolerance or resistance to QACs and antibiotics. De novo development of tolerance or resistance in real-world settings is uncommon. Increased attention to proper use of disinfectants is needed to prevent contamination of QAC disinfectants. Additional research is needed to answer many questions and concerns related to use of QAC disinfectants and their potential impact on antibiotic resistance.

Lipopolysaccharide structure modulates cationic biocide susceptibility and crystalline biofilm formation in Proteus mirabilis

Chlorhexidine (CHD) is a cationic biocide used ubiquitously in healthcare settings. Proteus mirabilis, an important pathogen of the catheterized urinary tract, and isolates of this species are often described as "resistant" to CHD-containing products used for catheter infection control. To identify the mechanisms underlying reduced CHD susceptibility in P. mirabilis, we subjected the CHD tolerant clinical isolate RS47 to random transposon mutagenesis and screened for mutants with reduced CHD minimum inhibitory concentrations (MICs). One mutant recovered from these screens (designated RS47-2) exhibited ~ 8-fold reduction in CHD MIC. Complete genome sequencing of RS47-2 showed a single mini-Tn5 insert in the waaC gene involved in lipopolysaccharide (LPS) inner core biosynthesis. Phenotypic screening of RS47-2 revealed a significant increase in cell surface hydrophobicity and serum susceptibility compared to the wildtype, and confirmed defects in LPS production congruent with waaC inactivation. Disruption of waaC was also associated with increased susceptibility to a range of other cationic biocides but did not affect susceptibility to antibiotics tested. Complementation studies showed that repression of smvA efflux activity in RS47-2 further increased susceptibility to CHD and other cationic biocides, reducing CHD MICs to values comparable with the most CHD susceptible isolates characterized. The formation of crystalline biofilms and blockage of urethral catheters was also significantly attenuated in RS47-2. Taken together, these data show that aspects of LPS structure and upregulation of the smvA efflux system function in synergy to modulate susceptibility to CHD and other cationic biocides, and that LPS structure is also an important factor in P. mirabilis crystalline biofilm formation.

The effect of disinfectants and antiseptics on co- and cross-selection of resistance to antibiotics in aquatic environments and wastewater treatment plants

The outbreak of the SARS-CoV-2 pandemic led to increased use of disinfectants and antiseptics (DAs), resulting in higher concentrations of these compounds in wastewaters, wastewater treatment plant (WWTP) effluents and receiving water bodies. Their constant presence in water bodies may lead to development and acquisition of resistance against the DAs. In addition, they may also promote antibiotic resistance (AR) due to cross- and co-selection of AR among bacteria that are exposed to the DAs, which is a highly important issue with regards to human and environmental health. This review addresses this issue and provides an overview of DAs structure together with their modes of action against microorganisms. Relevant examples of the most effective treatment techniques to increase the DAs removal efficiency from wastewater are discussed. Moreover, insight on the resistance mechanisms to DAs and the mechanism of DAs enhancement of cross- and co-selection of ARs are presented. Furthermore, this review discusses the impact of DAs on resistance against antibiotics, the occurrence of DAs in aquatic systems, and DA removal mechanisms in WWTPs, which in principle serve as the final barrier before releasing these compounds into the receiving environment. By recognition of important research gaps, research needs to determine the impact of the majority of DAs in WWTPs and the consequences of their presence and spread of antibiotic resistance were identified.

Major Phytochemical Compounds, In Vitro Antioxidant, Antibacterial, and Antifungal Activities of Six Aqueous and Organic Extracts of Crocus sativus L. Flower Waste

PURPOSE

After being considered as a neglected product, agricultural waste is nowadays considered of paramount importance. It has become a source of many chemical compounds with industrial, pharmaceutical, and food applications. This study aims to evaluate the primary phytochemical content, the antioxidant properties, and the antimicrobial activities of different extracts of saffron flower waste (SFE) against bacterial and fungal strains involved in diverse pathologies in southern Morocco.

METHODS

Total phenolic and flavonoid contents were determined. The antioxidant potentials were assessed by DPPH, FRAP, and β-carotene assays. The antimicrobial activity against four bacteria and four fungi was also evaluated. The findings in terms of the relationships between phytochemical content and all activities were depicted by PCA analyses.

RESULTS

SFEs contained large amounts of phenolic and flavonoid compounds that contribute to the significant antioxidant activities. Diethyl ether (DE), n-Butanol (n-B), and Ethyl acetate (EA) fractions respectively exhibited more DPPH scavenging capacity, FRAP reducing power, and β-carotene bleaching inhibition. DE and EA have a remarkable effect mainly against Staphylococcus aureus strain, compared to Listeria monocytogenes, Escherichia coli and Klebsiella pneumoniae. Both SFEs showed antifungal antagonism towards key fungi species involved in post-harvest mold and crop yield losses. Botrytis cinerea was more susceptible than Fusarium solani, Penicillium expansum, and Penicillium digitatum.

CONCLUSION

These results reveal new data about extracts obtained from SFE that could be a potential source of natural antioxidant and antimicrobial agents opening new possibilities for their applications in the food system as a natural preservative and a sustainable alternative to conventional ingredients.

Antibacterial and Antifungal Alkaloids from Asian Angiosperms: Distribution, Mechanisms of Action, Structure-Activity, and Clinical Potentials

The emergence of multidrug-resistant bacteria and fungi requires the development of antibiotics and antifungal agents. This review identified natural products isolated from Asian angiosperms with antibacterial and/or antifungal activities and analyzed their distribution, molecular weights, solubility, and modes of action. All data in this review were compiled from Google Scholar, PubMed, Science Direct, Web of Science, ChemSpider, PubChem, and a library search from 1979 to 2022. One hundred and forty-one antibacterial and/or antifungal alkaloids were identified during this period, mainly from basal angiosperms. The most active alkaloids are mainly planar, amphiphilic, with a molecular mass between 200 and 400 g/mol, and a polar surface area of about 50 Ų, and target DNA and/or topoisomerase as well as the cytoplasmic membrane. 8-Acetylnorchelerythrine, cryptolepine, 8-hydroxydihydrochelerythrine, 6-methoxydihydrosanguinarine, 2′-nortiliacorinine, pendulamine A and B, rhetsisine, sampangine, tiliacorine, tryptanthrin, tylophorinine, vallesamine, and viroallosecurinine yielded MIC ≤ 1 µg/mL and are candidates for the development of lead molecules.

Extra Virgin Olive Oil-Based Green Formulations With Promising Antimicrobial Activity Against Drug-Resistant Isolates

Extra virgin olive oil (EVOO) from Olea europaea L. drupes, a cornerstone in the Mediterranean diet, is well known for its nutritional and health properties, especially for prevention of cardiovascular diseases and metabolic disorders. Traditionally, beneficial health effects have been largely attributed to the high concentration of monounsaturated fatty acids, and in recent years, these have also been related to other components including oleacein and oleocanthal. Here, we evaluated, for the first time, the antimicrobial activity of different green extra virgin olive oil-based formulations in natural deep eutectic solvents (NaDESs) emerging as powerful and biocompatible solvents. Specifically, the antimicrobial activity of the EVOO extract, as well as purified oleocanthal and oleacein in two NaDESs (choline/glycerol and choline/propylene glycol), against several drug-resistant clinical isolates and standard microbial strains has been evaluated. The main result was the inhibitory activity of the EVOO extract in choline/glycerol as well as oleacein in choline/propylene glycol toward drug-resistant Gram-positive and -negative strains. Specifically, the EVOO extract in choline/glycerol showed the highest antibacterial activity against several clinical strains of Staphylococcus aureus, whereas oleacein in choline/propylene glycol was the most effective toward various clinical strains of Escherichia coli, Pseudomonas aeruginosa, and Klebsiella pneumoniae. In addition, all the formulations tested were effective against Candida spp. In conclusion, our results suggest EVOO-based formulations in NaDESs as an interesting strategy that may help in reducing the risk of development of drug resistance. Under this perspective, the usage of NaDESs for the preparation of new antimicrobial formulations may represent a promising approach.

Promising Photocytotoxicity of Water-Soluble Phtalocyanine against Planktonic and Biofilm Pseudomonas aeruginosa Isolates from Lower Respiratory Tract and Chronic Wounds

Alternative methods of killing microbes have been extensively researched in connection with the widespread appearance of antibiotic resistance among pathogenic bacteria. In this study, we report on in vitro antimicrobial phototoxicity research of cationic phthalocyanine with 2-(4-N-methylmorpholin-4-ium-4-yl)ethoxy substituents against selected clinical strains of Pseudomonas aeruginosa isolated from the lower respiratory tract and chronic wounds. The microorganisms tested in the research were analyzed in terms of drug resistance and biofilm formation. The photocytotoxic effect of phthalocyanine was determined by the reduction factor of bacteria. The studied cationic phthalocyanine at a concentration of 1.0 × 10−4 M, when activated by light, revealed a significant reduction factor, ranging from nearly 4 to 6 log, of P. aeruginosa cells when compared to the untreated control group. After single irradiation, a decrease in the number of bacteria in biofilm ranging from 1.3 to 4.2 log was observed, whereas the second treatment significantly improved the bacterial reduction factor from 3.4 to 5.5 log. It is worth mentioning that a boosted cell-death response was observed after the third irradiation, with a bacterial reduction factor ranging from 4.6 to 6.4 log. According to the obtained results, the tested photosensitizer can be considered as a potential antimicrobial photodynamic therapy against multidrug-resistant P. aeruginosa.

Disinfection of polymicrobial urines by electrochemical oxidation: Removal of antibiotic-resistant bacteria and genes

In this work, data obtained from the University Hospital Complex of Albacete (Spain) were selected as a case study to carry out the disinfection experiments. To do this, different configurations of electrochemical reactors were tested for the disinfection of complex urines. Results showed that 4-6 logs bacterial removal were achieved for every bacterium tested when working with a microfluidic flow-through reactor after 180 min (0.423 Ah dm^-3). The MIKROZON® cell reached a total disinfection after 60 min (1.212 Ah dm^-3), causing severe damages induced in the cell walls observed in SEM images. The concentration profiles of the electrogenerated disinfectants in solution could explain the differences observed. Additionally, a mean decrease in the ARGs concentration ranked as follows: bla_KPC (4.18-logs) > bla_TEM (3.96-logs) > ermB (3.23-logs) using the MIKROZON® cell. This electro-ozonizer could be considered as a suitable alternative to reduce the risk of antibiotic resistance spread. Hence, this study provides an insight into different electrochemical reactors for the disinfection of complex hospital urine matrices and contributes to reduce the spread of antibiotic resistance through the elimination of ARGs. A topic of great importance nowadays that needs to be further studied.

Valorisation of liquorice (Glycyrrhiza) roots: antimicrobial activity and cytotoxicity of prenylated (iso)flavonoids and chalcones from liquorice spent (G. glabra, G. inflata, and G. uralensis)

Prenylated phenolics are antimicrobials found in liquorice (Glycyrrhiza spp.).

Stigmasterol and β-Sitosterol: Antimicrobial Compounds in the Leaves of Icacina trichantha identified by GC–MS

Background

The development of resistance to many antibiotics currently in use has necessitated the search for more effective alternatives. Plants have been used in ethnomedicine in different parts of the world to treat various diseases. Many studies on plants have confirmed their medicinal potentials and have led to the isolation and characterization of several potential drug candidates. This study investigates the leaves of Icacina trichantha for antimicrobial properties and seeks to identify the compounds responsible for the observed activities. The leaves of Icacina trichantha are used in ethnomedicine for the treatment of skin infections. In this study, a solvent-based fractionation of bioactive compounds in the leaves of Icacina trichantha was carried out using hexane, ethyl acetate, and methanol. The resultant extracts were screened for antimicrobial activity against six bacteria and four fungi using standard procedures. GC–MS analysis of the most active fraction was carried out.

Results

The non-polar fraction (hexane) showed better antimicrobial activity than the ethyl acetate and methanol extracts. At 200 mg/mL, the fraction showed inhibition of 28.0 ± 0.82, 23.7 ± 0.47, and 24.6 ± 0.94 against Staphylococcus aureus, Escherichia coli, and Bacillus subtilis,, respectively. At the same concentration, the extract showed zones of inhibition of 18.0 ± 0.82 against Candida albicans and Penicillium notatum. The lowest Minimum Inhibitory Concentrations (MIC) values of 2.5 mg/mL were obtained against Staphylococcus aureus, Escherichia coli, and Bacillus subtilis. GC–MS analysis of the hexane extract revealed 62 peaks, out of which ten peaks were successfully characterized.

Conclusions

None of the extracts screened for antibacterial and antifungal activities in this study is as potent as the standard drugs, Gentamicin and Tioconazole. The hexane extract, however, showed some activity against the microorganisms and was analyzed using GC–MS. The hexane extract contained many bioactive compounds, some of which could not be identified. Two of the identified compounds, Stigmasterol and β-Sitosterol, are known to possess antimicrobial properties. However, the unidentified compounds could also have contributed significantly to the antimicrobial activities of the extract.

Adaptive Role of Cell Death in Yeast Communities Stressed with Macrolide Antifungals

Microorganisms cooperate with each other to protect themselves from environmental stressors. An extreme case of such cooperation is regulated cell death for the benefit of other cells. Dying cells can provide surviving cells with nutrients or induce their stress response by transmitting an alarm signal; however, the role of dead cells in microbial communities is unclear. Here, we searched for types of stressors the protection from which can be achieved by death of a subpopulation of cells. Thus, we compared the survival of Saccharomyces cerevisiae cells upon exposure to various stressors in the presence of additionally supplemented living versus dead cells. We found that dead cells contribute to yeast community resistance against macrolide antifungals (e.g., amphotericin B [AmB] and filipin) to a greater extent than living cells. Dead yeast cells absorbed more macrolide filipin than control cells because they exposed intracellular sterol-rich membranes. We also showed that, upon the addition of lethal concentrations of AmB, supplementation with AmB-sensitive cells but not with AmB-resistant cells enabled the survival of wild-type cells. Together, our data suggest that cell-to-cell heterogeneity in sensitivity to AmB can be an adaptive mechanism helping yeast communities to resist macrolides, which are naturally occurring antifungal agents.

IMPORTANCE Eukaryotic microorganisms harbor elements of programmed cell death (PCD) mechanisms that are homologous to the PCD of multicellular metazoa. However, it is still debated whether microbial PCD has an adaptive role or whether the processes of cell death are an aimless operation in self-regulating molecular mechanisms. Here, we demonstrated that dying yeast cells provide an instant benefit for their community by absorbing macrolides, which are bacterium-derived antifungals. Our results illustrate the principle that the death of a microorganism can contribute to the survival of its kin and suggest that early plasma membrane permeabilization improves community-level protection. The latter makes a striking contrast to the manifestations of apoptosis in higher eukaryotes, the process by which plasma membranes maintain integrity.

Bacterial Outer Membrane Vesicles as Antibiotic Delivery Vehicles

Bacterial outer membrane vesicles (OMVs) are nanometer-scale, spherical vehicles released by Gram-negative bacteria into their surroundings throughout growth. These OMVs have been demonstrated to play key roles in pathogenesis by delivering certain biomolecules to host cells, including toxins and other virulence factors. In addition, this biomolecular delivery function enables OMVs to facilitate intra-bacterial communication processes, such as quorum sensing and horizontal gene transfer. The unique ability of OMVs to deliver large biomolecules across the complex Gram-negative cell envelope has inspired the use of OMVs as antibiotic delivery vehicles to overcome transport limitations. In this review, we describe the advantages, applications, and biotechnological challenges of using OMVs as antibiotic delivery vehicles, studying both natural and engineered antibiotic applications of OMVs. We argue that OMVs hold great promise as antibiotic delivery vehicles, an urgently needed application to combat the growing threat of antibiotic resistance.

Chlorhexidine leads to the evolution of antibiotic-resistant Pseudomonas aeruginosa

Antimicrobial resistance is a major public-health concern. We evaluate chlorhexidine role in selection of resistant Pseudomonas aeruginosa mutants and their antibiotic cross-resistance. Mutation frequency and mutation rate after short-term exposure to sub-inhibitory concentrations of chlorhexidine were compared to those after spontaneous chlorhexidine-exposure, in P. aeruginosa PAO1 strain. Chlorhexidine-resistant mutants were generated, either by serial passage in increasing chlorhexidine concentrations or by single exposure to lethal chlorhexidine concentration. The generated mutants were tested for cross-resistance to different antibiotics, by determination of minimum inhibitory concentrations (MIC). The accompanied phenotypic changes in membrane permeability, outer membrane proteins (OMP), and efflux function were evaluated. The effect of exposure to chlorhexidine on MexAB-OprM, MexEF-oprN, and MexXY efflux pumps expression was investigated. No significant change was recorded between the mutation frequencies and mutation rates after short-term exposure to sub-inhibitory concentrations of chlorhexidine and after spontaneous chlorhexidine-exposure, in P. aeruginosa PAO1 strain. Twelve stable mutants, with ≥ eight-fold increase in chlorhexidine MIC, were generated. Several mutants showed increase in the MIC of colistin, cefepime, ceftazidime, meropenem, ciprofloxacin, and amikacin; seven mutants expressed meropenem cross-resistance. This was accompanied by decreased outer membrane permeability and changes in OMP. Using efflux pump inhibitor, chlorhexidine resistance was reverted in most isolates. Exposure to sub-inhibitory concentration of chlorhexidine induced the expression of MexXY efflux pump. Some resistant mutants had overexpressed MexXY efflux pump. Chlorhexidine can select P. aeruginosa strains with antibiotic cross-resistance. This necessitates implementing special protocols for chlorhexidine use and re-evaluation of its benefit versus risk in personal-care products.

One-pot synthesis of 6-aminohexanoic acid from cyclohexane using mixed-species cultures

6-Aminohexanoic acid (6AHA) is a vital polymer building block for Nylon 6 production and an FDA-approved orphan drug. However, its production from cyclohexane is associated with several challenges, including low conversion and yield, and severe environmental issues. We aimed at overcoming these challenges by developing a bioprocess for 6AHA synthesis. A mixed-species approach turned out to be most promising. Thereby, Pseudomonas taiwanensis VLB120 strains harbouring an upstream cascade converting cyclohexane to either є-caprolactone (є-CL) or 6-hydroxyhexanoic acid (6HA) were combined with Escherichia coli JM101 strains containing the corresponding downstream cascade for the further conversion to 6AHA. ε-CL was found to be a better 'shuttle molecule' than 6HA enabling higher 6AHA formation rates and yields. Mixed-species reaction performance with 4 g l-1 biomass, 10 mM cyclohexane, and an air-to-aqueous phase ratio of 23 combined with a repetitive oxygen feeding strategy led to complete substrate conversion with 86% 6AHA yield and an initial specific 6AHA formation rate of 7.7 ± 0.1 U gCDW -1 . The same cascade enabled 49% 7-aminoheptanoic acid yield from cycloheptane. This combination of rationally engineered strains allowed direct 6AHA production from cyclohexane in one pot with high conversion and yield under environmentally benign conditions.

Genetic but No Phenotypic Associations between Biocide Tolerance and Antibiotic Resistance in Escherichia coli from German Broiler Fattening Farms

Biocides are frequently applied as disinfectants in animal husbandry to prevent the transmission of drug-resistant bacteria and to control zoonotic diseases. Concerns have been raised, that their use may contribute to the selection and persistence of antimicrobial-resistant bacteria. Especially, extended-spectrum β-lactamase- and AmpC β-lactamase-producing Escherichia coli have become a global health threat. In our study, 29 ESBL-/AmpC-producing and 64 NON-ESBL-/AmpC-producing E.coli isolates from three German broiler fattening farms collected in 2016 following regular cleaning and disinfection were phylogenetically characterized by whole genome sequencing, analyzed for phylogenetic distribution of virulence-associated genes, and screened for determinants of and associations between biocide tolerance and antibiotic resistance. Of the 30 known and two unknown sequence types detected, ST117 and ST297 were the most common genotypes. These STs are recognized worldwide as pandemic lineages causing disease in humans and poultry. Virulence determinants associated with extraintestinal pathogenic E.coli showed variable phylogenetic distribution patterns. Isolates with reduced biocide susceptibility were rarely found on the tested farms. Nine isolates displayed elevated MICs and/or MBCs of formaldehyde, chlorocresol, peroxyacetic acid, or benzalkonium chloride. Antibiotic resistance to ampicillin, trimethoprim, and sulfamethoxazole was most prevalent. The majority of ESBL-/AmpC-producing isolates carried bla_CTX-M (55%) or bla_CMY-2 (24%) genes. Phenotypic biocide tolerance and antibiotic resistance were not interlinked. However, biocide and metal resistance determinants were found on mobile genetic elements together with antibiotic resistance genes raising concerns that biocides used in the food industry may lead to selection pressure for strains carrying acquired resistance determinants to different antimicrobials.

Bacterial resistance to antiseptics and disinfectants – minireview

The appearance of bacterial resistance to disinfectants and antiseptics is an issue of substantial health concern, resulting in low efficiency of epidemic control activities and emergence of microorganisms with cross-resistance to antibiotics and biocides. A synopsis of the main mechanisms of development of resistance to biocides is presented. The emphasis is placed to health risks and impact on medical practice. The main methods for detection of resistance, and prevention measures of key importance for its control are outlined.

Mapping the Efficacy and Mode of Action of Ethylzingerone [4-(3-Ethoxy-4-Hydroxyphenyl) Butan-2-One] as an Active Agent against Burkholderia Bacteria

Burkholderia cepacia complex (Bcc) bacteria are intrinsically antimicrobial-resistant opportunistic pathogens and key risk species in the contamination of nonfood industrial products. New agents and formulations to prevent growth of Burkholderia in home care (cleaning agents) and personal-care (cosmetics and toiletries) products are required. We characterized how ethylzingerone [4-(3-ethoxy-4-hydroxyphenyl) butan-2-one] (HEPB) acts as a preservative with activity against Burkholderia species encountered in industry. Burkholderia (n = 58) and non-Burkholderia (n = 7) bacteria were screened for susceptibility to HEPB, and its mode of action and resistance were determined for a model Burkholderia vietnamiensis strain using transposon mutagenesis, transcriptomics, and genome resequencing analysis. The susceptibility of Burkholderia spp. to HEPB (MIC = 0.45% ± 0.11% [wt/vol]; MBC = 0.90% ± 0.3% [wt/vol]) was characterized, with limited inter- and intraspecies differences. HEPB (1% [wt/vol]) was rapidly bactericidal, producing a 6-log reduction in viability within 4 h. Spontaneous resistance to HEPB did not develop, but transient phenotypes with altered growth characteristics and susceptibility to antibiotics were identified after prolonged exposure to sublethal HEPB concentrations. Transposon mutagenesis and RNA-sequencing analysis identified multiple genetic pathways associated with HEPB exposure, including stress response mechanisms, altered permeability, regulation of intracellular pH, damage and repair of intracellular components, and alteration and repair of lipopolysaccharides. Key pathways included the stringent response, homeostasis of intracellular pH by the kdp operon, protection against electrophiles by KefC, and repair of oxidized proteins by methionine sulfoxide reductase enzymes. In summary, we show that HEPB has potent, targeted efficacy against Burkholderia bacteria without promoting wider stable antimicrobial resistance. The mode of action of HEPB against Burkholderia is multifactorial, but killing by intracellular oxidation is a key mechanism of this promising agent.IMPORTANCE Burkholderia bacteria are opportunistic pathogens that can overcome preservatives used in the manufacture of nonsterile industrial products and occasionally cause contamination. Consequently, new preservatives to prevent the growth of key risk Burkholderia cepacia complex bacteria in nonfood industrial products are urgently required. Here, we show that ethylzingerone is active against these problematic bacteria, killing them via a multifactorial mode of action which involves intracellular oxidation.

Probing the interaction of ciprofloxacin and E. coli by electrochemistry, spectroscopy and atomic force microscopy

Under the present investigation, effect of ciprofloxacin (CIP) on Escherichia coli has been investigated using electrochemical, spectroscopic and atomic force microscope (AFM) measurements. Investigation reveals the interaction pattern of CIP with E. coli. The CIP essentially interacts with the outer membrane protein F (OmpF), the formation constant of the complex forms between CIP and the OmpF active sites over E. coli is obtained as log K_f of 12.1. Spectroscopic measurements are carried out, which supports the electrochemical measurements on the interaction between CIP and E. coli, at a higher concentration, CIP induces lysis of the E. coli cell membrane. Spectroscopic investigations further reveals that the FeS containing proteins present inside the E. coli cells released out through the ruptured cell membrane of E. coli. Different degrees of detrimental effects on E. coli has been observed when exposed to different concentrations of the drugs. The microscopic images obtained from the AFM scans of E. coli in presence of CIP shows deformation of the E. coli cell wall and its rupture with increasing concentrations of CIP.

Lipophilic Arginine Esters: The Gateway to Preservatives without Side Effects

This study hypothesized that long carbon chain cationic arginine (Arg) esters can be considered as toxicologically harmless preservatives. Arg-esters with C₁₈ and C₂₄ carbon chains, namely, arginine-oleate (Arg-OL) and arginine-decyltetradecanoate (Arg-DT), were synthesized. Structures were confirmed by FT-IR, ¹H NMR, and mass spectroscopy. Both Arg-esters were tested regarding hydrophobicity in terms of log P_{octanol/water}, critical micelle concentration (CMC), biodegradability, cytotoxicity, hemolysis, and antimicrobial activity against Escherichiacoli (E. coli), Staphylococcusaureus (S. aureus), Bacillussubtilis (B. subtilis), and Enterococcusfaecalis (E. faecalis). Log P_{octanol/water} of arginine was raised from −1.9 to 0.3 and 0.6 due to the attachment of C₁₈ and C₂₄ carbon chains, respectively. The critical micelle concentration of Arg-OL and Arg-DT was 0.52 and 0.013 mM, respectively. Both Arg-esters were biodegradable by porcine pancreatic lipase. In comparison to the well-established antimicrobials, benzalkonium chloride (BAC) and cetrimide, Arg-esters showed significantly less cytotoxic and hemolytic activity. Both esters exhibited pronounced antimicrobial properties against Gram-positive and Gram-negative bacteria comparable to that of BAC and cetrimide. The minimum inhibitory concentration (MIC) of Arg-esters was <50 μg mL^–1 against all tested microbes. Overall, results showed a high potential of Arg-esters with long carbon chains as toxicologically harmless novel preservatives.

Antioxidant and Antimicrobial Activity of Porcine Liver Hydrolysates Using Flavourzyme

Oxidative stress is implicated in human diseases including cancer or neurodegenerative diseases. On the other hand, lipid and microbial spoilage are the main issues of food degradation. Bioactive peptides with antioxidant and antimicrobial activity could solve both problems and create an opportunity to improve the sustainability of the meat industry. Recently, meat by-products are subject of numerous studies to produce antioxidant peptides, highlighting pork liver as a potential source of hydrolysates. To achieve this purpose, pork liver was digested with Flavourzyme at four reaction times (4, 6, 8, and 10 h) and filtered with cut-offs of 5, 10, and 30-kDa molecular weight. Monitoring hydrolysis with SDS-PAGE showed that the reaction was almost complete. Free amino acid profile exhibited that aliphatic and aromatic amino acids were released in a higher amount at longer reaction times. Heat map analysis demonstrated that a hydrolysis time beyond 6 h, displayed a differential amino acid pattern enabling us to optimize the enzymatic reaction. Antioxidant activity was assessed using ABTS, DPPH, FRAP, and ORAC tests, while antimicrobial assay was carried out against Gram-positive and Gram-negative. ABTS and DPPH values revealed that hydrolysates showed a high antioxidant capacity, as well as an inhibition of growth of Brochothrix thermosphata particularly 30 kDa hydrolysates.

Role of lipopolysaccharides and lipoteichoic acids on C-Chrysophsin-1 interactions with model Gram-positive and Gram-negative bacterial membranes

Antimicrobial peptides (AMPs) are attractive as biomaterial coatings because they have broad spectrum activity against different microbes, with a low likelihood of incurring antimicrobial resistance. Direct action against the bacterial membrane is the most common mechanism of action (MOA) of AMPs, with specific MOAs dependent on membrane composition, peptide concentration, and environmental factors that include temperature. Chrysophsin-1 (CHY1) is a broad spectrum salt-tolerant AMP that is derived from a marine fish. A cysteine modification was made to the peptide to facilitate attachment to a surface, such as a biomedical device. The authors used quartz crystal microbalance with dissipation monitoring to study how temperature (23 and 37 °C) and lipid composition influence the MOA of cysteine-modified peptide (C-CHY1) with model membranes comprised of supported lipid bilayers (SLBs). These two temperatures were used so that the authors could better understand the differences in behavior between typical lab temperatures and physiologic conditions. The authors created model membranes that mimicked properties of Gram-negative and Gram-positive bacteria in order to understand how the mechanisms might differ for different types of bacterial systems. SLB models of Gram-positive bacterial membranes were formed using combinations of phosphatidylcholine, phosphatidylglycerol (PG), and S. aureus-derived lipoteichoic acid (LTA). SLB models of Gram-negative bacterial membranes were formed using combinations of phosphatidylethanolamine (PE), PG, and E. coli-derived lipopolysaccharides (LPS). The molecules that distinguish Gram-positive and Gram-negative membranes (LTA and LPS) have the potential to alter the MOA of C-CHY1 with the SLBs. The authors' results showed that the MOA for the Gram-positive SLBs was not sensitive to temperature, but the LTA addition did have an effect. Specifically, similar trends in frequency and dissipation changes across all overtones were observed, and the same mechanistic trends were observed in the polar plots at 23 and 37 °C. However, when LTA was added, polar plots showed an association between C-CHY1 and LTA, leading to SLB saturation. This was demonstrated by significant changes in dissipation, while the frequency (mass) was not increasing after the saturation point. For the Gram-negative SLBs, the composition did not have a significant effect on MOA, but the authors saw more differences between the two temperatures studied. The authors believe this is due to the fact that the gel-liquid crystal transition temperature of PE is 25 °C, which means that the bilayer is more rigid at 23 °C, compared to temperatures above the transition point. At 23 °C, a significant energetic shift would be required to allow for additional AMP insertion. This could be seen in the polar plots, where there was a steep slope but there was very little mass addition. At 37 °C, the membrane is more fluid and there is less of an energetic requirement for insertion. Therefore, the authors observed greater mass addition and fewer changes in dissipation. A better understanding of C-CHY1 MOA using different SLB models will allow for the more rational design of future therapeutic solutions that make use of antimicrobial peptides, including those involving biomaterial coatings.

Antibacterial Activity of Amidodithiophosphonato Nickel(II) Complexes: An Experimental and Theoretical Approach

The reactions of 2,4-bis(4-methoxyphenyl)-1,3-dithio-2,4-diphosphetane-2,4-disulfide (Lawesson's Reagent, LR) with benzylamine (BzNH2) and 4-phenylbutylamine (PhBuNH2) yield benzylammonium P-(4-methoxyphenyl)-N-benzyl-amidodithiophosphonate (BzNH3)(BzNH-adtp) and 4-phenylbutylammonium P-(4-methoxyphenyl)-N-(4-phenylbutyl)-amidodithiophosphonate (PhBuNH3)(PhBuNH-adtp). The relevant nickel complexes [Ni(BzNH-adtp)2] and [Ni(PhBuNH-adtp)2] and the corresponding hydrolysed derivatives (BzNH3)2[Ni(dtp)2] and (PhBuNH3)2[Ni(dtp)2] were prepared and fully characterized. The antimicrobial activity of the aforementioned amidodithiophosphonates against a set of Gram-positive and Gram-negative pathogen bacteria was evaluated, and [Ni(BzNH-adtp)2] and [Ni(PhBuNH-adtp)2] showed antiproliferative activity towards Staphylococcus aureus and Staphylococcus haemolyticus strains. density functional theory (DFT) calculations were performed to shed some light on the activity of reported compounds related to their tendency towards P-N bond cleavage.

Phosphonium Ionic Liquid-Infused Poly(vinyl chloride) Surfaces Possessing Potent Antifouling Properties

Microbial fouling is a costly issue, which impacts a wide range of industries, such as healthcare, food processing, and construction industries, and improved strategies to reduce the impact of fouling are urgently required. Slippery liquid-infused porous surfaces (SLIPSs) have recently been developed as a bioinspired approach to prevent antifouling. Here, we report the development of slippery, superhydrophilic surfaces by infusing roughened poly(vinyl chloride) (PVC) substrates with phosphonium ionic liquids (PILs). These surfaces were capable of reducing viable bacterial adherence by Staphylococcus aureus and Pseudomonas aeruginosa by >6 log10 cfu mL-1 after 24 h under static conditions relative to control PVC. Furthermore, we report the potential of a series of asymmetric quaternary alkyl PILs with varying alkyl chain lengths (C4-C18) and counteranions to act as antimicrobial agents against both Gram +ve and Gram -ve bacteria and illustrate their potential as antimicrobial alternatives to traditional fluorinated lubricants commonly used in the synthesis of SLIPSs.

Antibacterial and cytotoxic activity assessment of Channa striatus (Haruan) extract

Background and Aim

Channa striatus extract, a freshwater snakehead fish known as Haruan, is popular in Southeast Asia for consumption and as a traditional therapeutic remedy for wound healing. C. striatus is also used in osteoarthritic for its anti-inflammatory. The aim of this study was to determine the presence of antibacterial properties of C. striatus extract against oral bacteria and to investigate the cytotoxic activity against Vero cells.

Materials and Methods

The authors prepared C. striatus extract in chloroform-methanol solvents. Next, the authors took subgingival microbiological samples from 16 cats that had periodontal disease. The authors determined the antibacterial properties of C. striatus extract against the isolated bacteria using the disk diffusion method and a broth microdilution-based resazurin microtiter assay. Finally, the authors used the Vero cell line to evaluate the cytotoxic activity, and they assessed the cell availability using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay.

Results

The results showed weak antibacterial activity of C. striatus extract against Pseudomonas spp. and Escherichia coli. In addition, the authors found that minimum inhibition concentration values ranged between 400 and 500 mg/mL, and minimum bactericidal concentration values ranged between 650 and 550 mg/mL. However, the cytotoxic results were promising, showing that C. striatus extract increased the cell viability and growth when it was at a higher concentration. The extract also promotes growth and cell proliferation.

Conclusion

These findings suggest that C. striatus extract promoted cell proliferation in vitro and could be a plausible therapeutic wound healing alternative for periodontal disease in cats.

Antibacterial activities of the extracts, fractions and isolated compounds from Canarium patentinervium Miq. against bacterial clinical isolates

Background

Canarium patentinervium leaves are used by the local indigenous people of Malaysia for wound healing. The current study is undertaken to screen the comprehensive antibacterial activity of the leaves and barks extracts, fractions and isolated compounds from this plant. Bioassay guided fractionation was also undertaken to deeply evaluate the antibacterial activity of the water fraction of the leaves extract. This is to provide preliminary scientific evidence to the ethnopharmacology usage of this plant by investigating antibacterial properties of the plant and its isolated constituents.

Methods

Bio-assay guided fractionation and subsequent isolation of compounds using open column chromatography. The antibacterial activity against gram positive and gram negative ATCC strain and resistant clinical strains were evaluated using microtiter broth dilution method to determine minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and time-kill assay. The chemical structure of the isolated compounds from the water fraction of the ethanol extract of leaves was elucidated using Nuclear Magnetic Resonance (NMR).

Results

The ethanol extract of the leaves and barks showed antimicrobial activity against all four ATCC and eight clinical isolates. The ethanol extract of the leaves and the corresponding water fraction had good activity against MRSA S. aureus. (MIC: 250 μg/ml) and had bactericidal effect on eight of the clinical strains (MSSA,MRSA, oxacillin-resistant CONS, oxacillin-sensitive CONS, Enterococcus faecalis, Klebsiela species, Kleb pneumoniae ESBL and Candida parapsilosis). Further phytochemical investigation of the water fraction of the crude ethanol extract of leaves afforded compound 7 (hyperin) and compound 8 (cynaroside) that had bactericidal activity against tested bacterial species (MIC 50 μg/ml and 100 μg/ml). The two compounds were isolated from this genus for the first time.

Conclusions

These results may provide a rational support for the traditional use of Canarium patentinervium Miq. in infections and wound healing, since the antimicrobial compounds isolated were also present in the leaves extract.

A Rapid Assay to Assess Nitrification Inhibition Using a Panel of Bacterial Strains and Partial Least Squares Modeling

As a proof of concept, a rapid assay consisting of a cell-based biosensor (CBB) panel of pure bacterial strains, a fluorescent dye, and partial least squares (PLS) modeling was developed to assess the nitrification inhibition potential of industrial wastewater (WW) samples. The current standard method used to assess the nitrification inhibition potential is the specific nitrification rate (SNR) batch test, which requires approximately 4 h to complete under the watch of an experienced operator. In this study, we exposed the CBB panel of seven bacterial strains (nitrifying and non-nitrifying) to 28 different industrial WW samples and then probed both the membrane integrity and cellular activity using a commercially available "live/dead" fluorescent dye. The CBB panel response acts as a surrogate measurement for the performance of nitrification. Of the seven strains, four (Nitrospira, Escherichia coli, Bacillus subtilis, Bacillus cereus) were identified via the modeling technique to be the most significant contributors for predicting the nitrification inhibition potential. The key outcome from this work is that the CBB panel fluorescence data (collected in approximately 10 min) can accurately predict the outcome of an SNR batch test (that takes 4 h) when performed with the same WW samples and has a strong potential to approximate the chemical composition of these WW samples using PLS modeling. Overall, this is a powerful technique that can be used for point-of-use detection of nitrification inhibition.

Biocatalytic Synthesis of Lipophilic Baicalin Derivatives as Antimicrobial Agents

Enzymatic acylation is commonly used to increase the lipophilicity of flavonoids. However, the absence of primary hydroxyl groups makes it challenging to acylate baicalin using traditional acylation methods. In this study, an enzymatic esterification strategy was developed to introduce fatty-acid chains into baicalin at its carboxyl group, hence successfully synthesizing a new series of baicalin ester derivatives in nonaqueous media. Under the optimal reaction conditions, up to 95% conversion of baicalin was achieved. Antimicrobial evaluation of the baicalin ester derivatives indicated a corresponding increase to that of C log P values, with a cutoff effect at C log P = 5.2. Baicalin ester derivatives with C log P values of 4.9-5.2 exhibited the most potent antimicrobial activity. Interestingly, the introduction of medium-length fatty alcohol chains not only increased lipophilicity but also endowed them with membrane-disrupting properties. This study, therefore, provides an understanding of the esterification of flavonoid glycosides and a prospective application of the ester derivatives.

Phytochemical Analysis and Evaluation of Antimicrobial Activity of Peumus boldus, Psidium guajava, Vernonia polysphaera, Persea Americana, Eucalyptus citriodora Leaf Extracts and Jatropha multifida Raw Sap

BACKGROUND

Currently, the treatment of infectious diseases has not always been successful due to the emergence of microbial resistance worldwide.

OBJECTIVES

This study aimed to evaluate the antioxidant activity, content of total phenolic compounds and flavonoids, antifungal potential and antibacterial action of six medicinal plants found in the Cerrado, leaf extracts of Boldo (Peumus boldus), Goiaba (Psidium guajava), Assa-Peixe (Vernonia polysphaera), Abacate (Persea americana), Eucalipto (Eucalyptus citriodora) and raw sap of Bálsamo (Jatropha multifida).

METHODS

The antioxidant activity was also determined through the DPPH, ABTS and phosphomolybdenum assays. In addition, the total phenolic content and flavonoid dosage were analyzed using the Folin- Ciocalteu method and the aluminum chloride test, respectively.

RESULTS

All extracts, except from Assa-Peixe, showed promising values against Staphylococcus aureus, with halos varying from 13-20 mm. Analysis of the minimum inhibitory concentration (MIC) values of the six medicinal plants revealed inhibitory activity of S. aureus, with concentrations varying from 3.12-12.5 mg/mL, which is a significant result considering that S. aureus is one of the main causes of hospital infections.

CONCLUSION

In the analysis of the phytochemical profile, Goiaba contained the best yield of phenolic compounds and total flavonoids, as well as higher antioxidant activity by DPPH and phosphomolybdenum, demonstrating that this species contains antioxidant components that can sequester free radicals under in vitro conditions. Therefore, the crude extracts investigated are promising and their antibacterial and antioxidant actions should be thoroughly studied.

A comparative study on chemical composition and antimicrobial activity of essential oils from three Phlomis species from Uzbekistan

Essential oils obtained from the aerial parts of Phlomis bucharica, P. salicifolia and P. sewerzowii were determined using GC-FID and GC-MS methods. A total of 76 components were identified in the three species representing 97.12, 88.34, and 96.41% of the whole oil, respectively. High percentages of thymol (20.41%) and camphor (14.46%) exist in P. bucharica oil. Methyl palmitate predominates in P. salicifolia oil representing 51.15% whereas thymol (35.76%) is the major constituent in P. sewerzowii essential oil. GC-MS analyses showed that P. bucharica and P. sewerzowii are more closely related comparable to P. salicifolia. The antimicrobial activity of the essential oils was assessed against different microorganisms using agar-disc diffusion and broth microdilution assay. Among the three tested species, the essential oil of P. salicifolia showed the highest antibacterial activity.

Resistance of Bacteria to Biocides

Biocides and formulated biocides are used worldwide for an increasing number of applications despite tightening regulations in Europe and in the United States. One concern is that such intense usage of biocides could lead to increased bacterial resistance to a product and cross-resistance to unrelated antimicrobials including chemotherapeutic antibiotics. Evidence to justify such a concern comes mostly from the use of health care-relevant bacterial isolates, although the number of studies of the resistance characteristics of veterinary isolates to biocides have increased the past few years. One problem remains the definition of "resistance" and how to measure resistance to a biocide. This has yet to be addressed globally, although the measurement of resistance is becoming more pressing, with regulators both in Europe and in the United States demanding that manufacturers provide evidence that their biocidal products will not impact on bacterial resistance. Alongside in vitro evidence of potential antimicrobial cross-resistance following biocide exposure, our understanding of the mechanisms of bacterial resistance and, more recently, our understanding of the effect of biocides to induce a mechanism(s) of resistance in bacteria has improved. This article aims to provide an understanding of the development of antimicrobial resistance in bacteria following a biocide exposure. The sections provide evidence of the occurrence of bacterial resistance and its mechanisms of action and debate how to measure bacterial resistance to biocides. Examples pertinent to the veterinary field are used where appropriate.

QSAR of 1,4-benzoxazin-3-one antimicrobials and their drug design perspectives

Synthetic derivatives of 1,4-benzoxazin-3-ones have been shown to possess promising antimicrobial activity, whereas their natural counterparts were found lacking in this respect. In this work, quantitative structure-activity relationships (QSAR) of natural and synthetic 1,4-benzoxazin-3-ones as antimicrobials were established. Data published in literature were curated into an extensive dataset of 111 compounds. Descriptor selection was performed by a genetic algorithm. QSAR models revealed differences in requirements for activity against fungi, gram-positive and gram-negative bacteria. Shape, VolSurf, and H-bonding property descriptors were frequently picked in all models. The models obtained for gram-positive and gram-negative bacteria showed good predictive power (Q²_Ext 0.88 and 0.85, respectively). Based on the models generated, an additional set of 1,4-benzoxazin-3-ones, for which no antimicrobial activity had been determined in literature, were evaluated in silico. Additionally, newly designed lead compounds with a 1,4-benzoxazin-3-one scaffold were generated in silico by varying the positions and combinations of substituents. Two of these were predicted to be up to 5 times more active than any of the compounds in the current dataset. The 1,4-benzoxazin-3-one scaffold was concluded to possess potential for the design of new antimicrobial compounds with potent antibacterial activity, a multitarget mode of action, and possibly reduced susceptibility to gram negatives' efflux pumps.

Nanomaterials and molecular transporters to overcome the bacterial envelope barrier: Towards advanced delivery of antibiotics

With the dramatic consequences of bacterial resistance to antibiotics, nanomaterials and molecular transporters have started to be investigated as alternative antibacterials or anti-infective carrier systems to improve the internalization of bactericidal drugs. However, the capability of nanomaterials/molecular transporters to overcome the bacterial cell envelope is poorly understood. It is critical to consider the sophisticated architecture of bacterial envelopes and reflect how nanomaterials/molecular transporters can interact with these envelopes, being the major aim of this review. The first part of this manuscript overviews the permeability of bacterial envelopes and how it limits the internalization of common antibiotic and novel oligonucleotide drugs. Subsequently we critically discuss the mechanisms that allow nanomaterials/molecular transporters to overcome the bacterial envelopes, focusing on the most promising ones to this end - siderophores, cyclodextrins, metal nanoparticles, antimicrobial/cell-penetrating peptides and fusogenic liposomes. This review may stimulate drug delivery and microbiology scientists in designing effective nanomaterials/molecular transporters against bacterial infections.