Cloning and over-expression of thermostable Bacillus sp. YM55-1 aspartase and site-directed mutagenesis for probing a catalytic residue

One-Pot Biosynthesis of l-Aspartate from Maleic Anhydride via a Thermostable Dual-Enzyme System under High Temperature

l-Aspartate is an important chemical in the food and pharmaceutical industries. Herein, a dual-enzyme system was constructed to synthesize l-aspartate from maleic anhydride at 50 °C, which can reduce the byproduct production. Maleate transformed from maleic anhydride in the solution was converted into l-aspartate via fumarate catalyzed by maleate isomerase (MaiA) and thermostable aspartase (AspB), respectively. Because MaiA is a rate-limiting enzyme, enzyme activities of various MaiAs were compared, and the efficient and thermostable maleate isomerase AaMaiA from Alicyclobacillus acidoterrestris was chosen. The K_cat/K_m value of AaMaiA was 264.4 mM^-1 min^-1. AaMaiA and AspB were coexpressed in E. coli to produce l-aspartate. To improve the l-aspartate production rate, the ribosome binding site (RBS) sequence located upstream of AaMaiA was optimized and the Tat signal peptide was fused with AaMaiA. The conversion rate was 96% within 60 min, and the intermediate was not detected, the possible reason of which is that high temperature inhibits the activity of bacterial endogenous enzymes, but functional enzymes remain active. Cells from fermentation produced 243.6 g/L (1.83 M) of l-aspartate with a 2 M substrate. Our study revealed an effective method to produce l-aspartate without using gene knockout and provided a strategy for l-aspartate production in the industrial field.

Immobilization of the Aspartate Ammonia-lyase from Pseudomonas fluorescens R124 on Magnetic Nanoparticles - Characterization and Kinetics

Aspartate ammonia-lyases (AALs) catalyze the non-oxidative elimination of ammonia from l-aspartate to result fumarate and ammonia. In this work the AAL coding gene from Pseudomonas fluorescens R124 was identified, isolated, and cloned into pET-15b expression vector and expressed in E. coli . The purified enzyme (PfAAL) showed optimal activity at pH 8.8, Michaelis-Menten kinetics in the ammonia elimination from l-aspartate, and no strong dependence on divalent metal ions for its activity. The purified PfAAL was covalently immobilized on epoxy-functionalized magnetic nanoparticles (MNP), and effective kinetics of the immobilized PfAAL-MNP was compared to the native solution form. Glycerol addition significantly enhanced the storability of PfAAL-MNP. Inhibiting effect of the growing viscosity (modulated by addition of glycerol or glucose) on the enzymatic activity was observed for the native and immobilized form of PfAAL, as previously described for other free enzymes. The storage stability and recyclability of PfAAL-MNP is promising for further biocatalytic applications.

Computational redesign of enzymes for regio- and enantioselective hydroamination

Introduction of innovative biocatalytic processes offers great promise for applications in green chemistry. However, owing to limited catalytic performance, the enzymes harvested from nature's biodiversity often need to be improved for their desired functions by time-consuming iterative rounds of laboratory evolution. Here we describe the use of structure-based computational enzyme design to convert Bacillus sp. YM55-1 aspartase, an enzyme with a very narrow substrate scope, to a set of complementary hydroamination biocatalysts. The redesigned enzymes catalyze asymmetric addition of ammonia to substituted acrylates, affording enantiopure aliphatic, polar and aromatic β-amino acids that are valuable building blocks for the synthesis of pharmaceuticals and bioactive compounds. Without a requirement for further optimization by laboratory evolution, the redesigned enzymes exhibit substrate tolerance up to a concentration of 300 g/L, conversion up to 99%, β-regioselectivity >99% and product enantiomeric excess >99%. The results highlight the use of computational design to rapidly adapt an enzyme to industrially viable reactions.

Enhanced production of recombinant aspartase of Aeromonas media NFB-5 in a stirred tank reactor

Aspartase gene (aspA) from Aeromonas media NFB-5 was cloned and expressed in Escherichia coli BL21 using pET21b(+) expression vector. Maximum production of aspartase was obtained at shake-flask after 5 h of IPTG (1.5 mM) induction at 37°C and by supplementing the media with KH2PO4 (0.3%, w/v) and K2HPO4 (0.3%, w/v). Further production was investigated at a laboratory scale stirred tank reactor using response surface methodology (RSM). Agitation (130-270 rpm), aeration (0.30-1.70 vvm) and IPTG induction time (3-7 h) was optimized. Optimal levels of agitation (250 rpm), aeration (1.25 vvm) and induction time (6h) were determined by statistical analysis of the experimental data. More than 7-fold increase in recombinant aspartase (1234 U/g wet weight) was observed than the parent strain (172 U/g wet wt). Homogenized immobilized permeabilized recombinant cells (566 mg/g wet cells) produced more L-aspartic acid as compared to permeabilized recombinant free cells (154 mg/g wet cells).

Structural basis for the catalytic mechanism of aspartate ammonia lyase

Aspartate ammonia lyases (or aspartases) catalyze the reversible deamination of L-aspartate into fumarate and ammonia. The lack of crystal structures of complexes with substrate, product, or substrate analogues so far precluded determination of their precise mechanism of catalysis. Here, we report crystal structures of AspB, the aspartase from Bacillus sp. YM55-1, in an unliganded state and in complex with L-aspartate at 2.4 and 2.6 Å resolution, respectively. AspB forces the bound substrate to adopt a high-energy, enediolate-like conformation that is stabilized, in part, by an extensive network of hydrogen bonds between residues Thr101, Ser140, Thr141, and Ser319 and the substrate's β-carboxylate group. Furthermore, substrate binding induces a large conformational change in the SS loop (residues G(317)SSIMPGKVN(326)) from an open conformation to one that closes over the active site. In the closed conformation, the strictly conserved SS loop residue Ser318 is at a suitable position to act as a catalytic base, abstracting the Cβ proton of the substrate in the first step of the reaction mechanism. The catalytic importance of Ser318 was confirmed by site-directed mutagenesis. Site-directed mutagenesis of SS loop residues, combined with structural and kinetic analysis of a stable proteolytic AspB fragment, further suggests an important role for the small C-terminal domain of AspB in controlling the conformation of the SS loop and, hence, in regulating catalytic activity. Our results provide evidence supporting the notion that members of the aspartase/fumarase superfamily use a common catalytic mechanism involving general base-catalyzed formation of a stabilized enediolate intermediate.

Biocatalytic enantioselective synthesis of N-substituted aspartic acids by aspartate ammonia lyase

The gene encoding aspartate ammonia lyase (aspB) from Bacillus sp. YM55-1 has been cloned and overexpressed, and the recombinant enzyme containing a C-terminal His(6) tag has been purified to homogeneity and subjected to kinetic characterization. Kinetic studies have shown that the His(6) tag does not affect AspB activity. The enzyme processes L-aspartic acid, but not D-aspartic acid, with a K(m) of approximately 15 mM and a k(cat) of approximately 40 s(-1). By using this recombinant enzyme in the reverse reaction, a set of four N-substituted aspartic acids were prepared by the Michael addition of hydroxylamine, hydrazine, methoxylamine, and methylamine to fumarate. Both hydroxylamine and hydrazine were found to be excellent substrates for AspB. The k(cat) values are comparable to those observed for the AspB-catalyzed addition of ammonia to fumarate ( approximately 90 s(-1)), whereas the K(m) values are only slightly higher. The products of the enzyme-catalyzed addition of hydrazine, methoxylamine, and methylamine to fumarate were isolated and characterized by NMR spectroscopy and HPLC analysis, which revealed that AspB catalyzes all the additions with excellent enantioselectivity (>97 % ee). Its broad nucleophile specificity and high catalytic activity make AspB an attractive enzyme for the enantioselective synthesis of N-substituted aspartic acids, which are interesting building blocks for peptide and pharmaceutical synthesis as well as for peptidomimetics.

Crystal structure of thermostable aspartase from Bacillus sp. YM55-1: structure-based exploration of functional sites in the aspartase family

The crystal structure of the thermostable aspartase from Bacillus sp. YM55-1 has been solved and refined for 2.5A resolution data with an R-factor of 22.1%. The present enzyme is a homotetramer with subunits composed of three domains. It exhibits no allosteric effects, in contrast to the Escherichia coli aspartase, which is activated by divalent metal cation and L-aspartate, but is four-times more active than the E.coli enzyme. The overall folding of the present enzyme subunit is similar to those of the E.coli aspartase and the E.coli fumarase C, both of which belong to the same superfamily as the present enzyme. A local structural comparison of these three enzymes revealed seven structurally different regions. Five of the regions were located around putative functional sites, suggesting the involvement of these regions into the functions characteristic of the enzymes. Of these regions, the region of Gln96-Gly100 is proposed as a part of the recognition site of the alpha-amino group in L-aspartate for aspartase and the hydroxyl group in L-malate for fumarase. The region of Gln315-Gly323 is a flexible loop with a well-conserved sequence that is suggested to be involved in the catalytic reaction. The region of Lys123-Lys128 corresponds to a part of the putative activator-binding site in the E.coli fumarase C. The region in the Bacillus aspartase, however, adopts a main-chain conformation that prevents the activator binding. The regions of Gly228-Glu241 and Val265-Asp272, which form a part of the active-site wall, are suggested to be involved in the allosteric activation of the E.coli aspartase by the binding of the metal ion and the activator. Moreover, an increase in the numbers of intersubunit hydrogen bonds and salt-bridges is observed in the Bacillus aspartase relative to those of the E.coli enzyme, implying a contribution to the thermostability of the present aspartase.

Structural studies of duck delta 1 and delta 2 crystallin suggest conformational changes occur during catalysis

Duck delta1 and delta2 crystallin are 94% identical in amino acid sequence, and while delta2 crystallin is the duck orthologue of argininosuccinate lyase (ASL) and catalyzes the reversible breakdown of argininosuccinate to arginine and fumarate, the delta1 isoform is enzymatically inactive. The crystal structures of wild type duck delta1 and delta2 crystallin have been solved at 2.2 and 2.3 A resolution, respectively, and the refinement of the turkey delta1 crystallin has been completed. These structures have been compared with two mutant duck delta2 crystallin structures. Conformational changes were observed in two regions of the N-terminal domain with intraspecies differences between the active and inactive isoforms localized to residues 23-32 and both intra- and interspecies differences localized to the loop of residues 74-89. As the residues implicated in the catalytic mechanism of delta2/ASL are all conserved in delta1, the amino acid substitutions in these two regions are hypothesized to be critical for substrate binding. A sulfate anion was found in the active site of duck delta1 crystallin. This anion, which appears to mimic the fumarate moiety of the argininosuccinate substrate, induces a rigid body movement in domain 3 and a conformational change in the loop of residues 280-290, which together would sequester the substrate from the solvent. The duck delta1 crystallin structure suggests that Ser 281, a residue strictly conserved in all members of the superfamily, could be the catalytic acid in the delta2 crystallin/ASL enzymatic mechanism.

Analysis of essential leucine residue for catalytic activity of novel thermostable chitosanase by site-directed mutagenesis

Bacterial chitosanases share weak amino acid sequence similarities at certain regions of each enzyme. These regions have been assumed to be important for catalytic activities of the enzyme. To verify this assumption, the functional importance of the conserved region in a novel thermostable chitosanase (TCH-2) from Bacillus coagulans CK108 was investigated. Each of the conserved amino acid residues (Leu64, Glu80, Glu94, Asp98, and Gly108) was changed to aspartate and glutamine or asparagine and glutamate by site-directed mutagenesis, respectively. Kinetic parameters for colloidal chitosan hydrolysis were determined with wild-type and 10 mutant chitosanases. The Leu64 --> Arg and Leu64 --> Gln mutations were essentially inactive and kinetic parameters such as Vmax and kcat were approximately 1/10(7) of those of the wild-type enzyme. The Asp98 --> Asn mutation did not affect the Km value significantly, but decreased kcat to 15% of that of wild-type chitosanase. On the other hand, the Asp98 --> Glu mutation affected neither Km nor kcat. The observation that approximately 15% of activity remained after the substitution of Asp98 by Asn indicated that the carboxyl side chain of Asp98 is not absolutely required for catalytic activity. These results indicate that the Leu64 residue is directly involved in the catalytic activity of TCH-2.