Formation of hippocampal synapses on patterned substrates of a laminin-derived synthetic peptide

Cell patterning using a template of microstructured organosilane layer fabricated by vacuum ultraviolet light lithography

Micropatterning techniques have become increasingly important in cellular biology. Cell patterning is achieved by various methods. Photolithography is one of the most popular methods, and several light sources (e.g., excimer lasers and mercury lamps) are used for that purpose. Vacuum ultraviolet (VUV) light that can be produced by an excimer lamp is advantageous for fabricating material patterns, since it can decompose organic materials directly and efficiently without photoresist or photosensitive materials. Despite the advantages, applications of VUV light to pattern biological materials are few. We have investigated cell patterning by using a template of a microstructured organosilane layer fabricated by VUV lithography. We first made a template of a microstructured organosilane layer by VUV lithography. Cell adhesive materials (poly(d-lysine) and polyethyleneimine) were chemically immobilized on the organosilane template, producing a cell adhesive material pattern. Primary rat cardiac and neuronal cells were successfully patterned by culturing them on the pattern substrate. Long-term culturing was attained for up to two weeks for cardiac cells and two months for cortex cells. We have discussed the reproducibility of cell patterning and made suggestions to improve it.

Hippocampal networks on reliable patterned substrates

Toward the goal of reproducible live neuronal networks, we investigated the influence of substrate patterns on neuron compliance and network activity. We optimized process parameters of micro-contact printing for reproducible geometric patterns of 10 μm wide lines of polylysine with 4, 6, or 8 connections at a constant square array of nodes overlying the recording electrodes of a multielectrode array (MEA). We hypothesized that an increase in node connections would give the network more inputs resulting in higher neuronal outputs as network spike rates. We also chronically stimulated these networks during development and added astroglia to enhance network activity. Our results show that despite frequent localization of neuron somata over the electrodes, the number of spontaneously active electrodes was reduced 3-fold compared to random networks, independent of pattern complexity. Of the electrodes active, the overall spike rate was independent of pattern complexity, consistent with homeostasis of activity. Lower mean burst rates were seen with higher levels of pattern complexity; however, burst durations increased 1.6-fold with pattern complexity (n=6027 bursts, p<0.001). Inter-burst interval and percentage of active electrodes displaying bursts also increased with pattern complexity. The extra-burst (non-burst or isolated) spike rate increased 4-fold with pattern complexity, but this relationship was reversed with either chronic stimulation or astroglia addition. These studies suggest for the first time that patterns which limit the distribution of branches and inputs are deleterious to activity in a hippocampal network, but that higher levels of pattern complexity promote non-burst activity and favor longer lasting, but fewer bursts.

Distance dependence of neuronal growth on nanopatterned gold surfaces

Understanding network development in the brain is of tremendous fundamental importance, but it is immensely challenging because of the complexity of both its architecture and function. The mechanisms of axonal navigation to target regions and the specific interactions with guidance factors such as membrane-bound proteins, chemical gradients, mechanical guidance cues, etc., are largely unknown. A current limitation for the study of neural network formation is the ability to control precisely the connectivity of small groups of neurons. A first step in designing such networks is to understand the "rules" central nervous system (CNS) neurons use to form functional connections with one another. Here we begin to delineate novel rules for growth and connectivity of small numbers of neurons patterned on Au substrates in simplified geometries. These studies yield new insights into the mechanisms determining the organizational features present in intact systems. We use a previously reported atomic force microscopy (AFM) nanolithography method to control precisely the location and growth of neurons on these surfaces. By examining a series of systems with different geometrical parameters, we quantitatively and systematically analyze how neuronal growth depends on these parameters.

Designing Neural Networks in Culture: Experiments are described for controlled growth, of nerve cells taken from rats, in predesigned geometrical patterns on laboratory culture dishes

Technology has advanced to where it is possible to design and grow-with predefined geometry and surprisingly good fidelity-living networks of neurons in culture dishes. Here we overview the elements of design, emphasizing the lithographic techniques that alter the cell culture surface which in turn influences the attachment and growth of the neural networks. Advanced capability in this area makes it possible to design networks of desired complexity. Other issues addressed include the influence of glial cells and media on activity and the potential for extending the designs into three dimensions. Investigators are advancing the art and science of analyzing and controlling through stimulation the function of the neural networks, including the ability to take advantage of their geometric form in order to influence functional properties.

Neuroprotective effects of laminin and its KDI domain

Successful treatment of neurodegenerative diseases and CNS trauma are the most intractable problems in modern medicine. Numerous reports have shown the strong role that laminins have on the survival, regeneration and development of various types of cells, including neural cells. It would be desirable to take advantage of laminin activities for therapeutic purposes. However, there are at least ten laminin variants and the trimeric molecules are of the order of 800,000 molecular weight. Furthermore, human laminins are not available in quantity. Therefore, we and others have taken the approach of determining which domains of the laminin molecules are functional in the CNS, and whether short peptides from these regions exhibit biological activities with the intent of testing their potential for therapeutic use. Understanding the role of laminins and their small biologically active peptide domains, such as the KDI (lysine–aspartic acid–isoleucine) peptide from γ1 laminin, in neuronal development, CNS trauma (spinal cord injury and stroke) and neurodegenerative disorders (amyotrophic lateral sclerosis, Alzheimer’s disease and Parkinson’s disease) may help to develop clinically applicable methods to treat the presently untreatable CNS diseases and trauma even in the near future.

Growth cone 3-D morphology is modified by distinct micropatterned adhesion substrates

The development, connectivity, and structural plasticity of neuronal networks largely depend on the directional growth of axonal growth cones (GCs). The morphology and 3-D profile of axons and GCs of primary hippocampal neurons, grown onto glass surfaces coated with poly-D-lysine (PDL) and micropatterned with stripes of the adhesion molecule L1 by using the indirect microcontact printing, were investigated. Neurons were fixed at early stages (one to seven days) of in vitro development prior to synapse formation, and analyzed by fluorescence and atomic force microscopy. The latter technique allowed us to investigate the 3-D morphology of the GCs, and detect their morphological rearrangements during axon outgrowth and during contact with the underlying substrate. We found that axons decreased their height-to-width ratio over development in culture, and that this value became particularly low when the axon and the GC proceeded onto a surface containing attracting cues such as L1 with respect to GCs growing onto a nonspecific adhesion substrate such as PDL. Along with this shape change of the axons, GCs lying onto L1 tracks displayed a flattened shape, ideal for sensing and progression, whereas GCs onto areas of nonspecific adhesion displayed more prominent shapes and steeper edges.

Development of astroglial cells in patterned neuronal cultures

The purpose of this work was to study the development of astroglial cells in patterned neuronal cultures. Hippocampal neurons, derived from embryonic stage (E18) rats and cultured in serum-free Neurobasal/B27 medium, grew to follow patterns of poly(D-lysine) created by micro-contact printing. The growth of the astroglial cells and the co-localization of neurons and astroglial cells were measured for up to one month using fluorescence immunostaining of neurons and astroglial cells. Neurons grew to form square patterns within 2 weeks, while astroglia only started to emerge in the same period. Astroglial cells continued to proliferate for a month following a general growth curve. Over 90% of the astroglial cell area co-localized with neurons (within 2 mum) at an early stage of astroglial development (13 DIV). Over the remaining period, astroglial cells proliferated and the co-localization was 80%. Hence, in these culture conditions astroglial cells develop 2-3 weeks later than neurons but remain highly co-localized with neurons.

Effect of bicuculline on the spontaneous and evoked activity of patterned embryonic hippocampal neurons cultured in vitro

Characterization of the spontaneous and evoked activity of patterned biological neural networks and discovery of the underlying mechanisms is a major step towards designing functional networks for biosensor, biocomputing and neural prosthetic applications. Here we report on the addition of bicuculline methiodide, a GABA(A) antagonist, to a low density network of embryonic hippocampal neurons linearly patterned on top of planar microelectrode arrays. Our investigation of the differences in the spontaneous and evoked activities before and after drug addition revealed two distinct behavioral trends. One group of electrodes (Group II) showed a marked increase in spontaneous spike rate, burst rate, and burst duration whereas the other (Group I) was unaffected. Likewise, the reliability of evoked activity was observed to be significantly lower in the presence of bicuculline if the stimulating electrode belonged to Group I as compared with Group II. We discuss how these findings might suggest the existence of cells at various stages of maturity in our culture system.

Neuronal Network Morphology and Electrophysiologyof Hippocampal Neurons Cultured on Surface-Treated Multielectrode Arrays

Toward the development of biocompatible surfaces for implantable electrode arrays and the creation of patterned neuronal networks, the impact of select biochemical substrates [poly-D-lysine (PDL), polyornithine (PO), polyethylenimine (PEI), and a basement membrane extract (BM)] on network morphology and spontaneous electrophysiological activity of dissociated hippocampal neurons was investigated. Cultured in serum-free Neurobasal medium at 100 000 cells/cm(2), neurons attached to each substrate. PDL, PO, and PEI induced little or no neuronal clustering and process fasciculation, whereas the addition of BM promoted these features. The ratios of somas to processes, and axons to dendrites, as determined by immunohistochemical staining and image analysis were comparable across all substrates. Spontaneous firing was recorded using planar multielectrode arrays (MEAs) at the third week in vitro for the two most divergent morphologies according to Euclidian cluster analysis, namely those induced by PO + BM and PEI. Mean spike amplitude, mean firing rate, median interspike interval (ISI), mean burst rate, and correlation index were analyzed and compared to morphological features. Synchronized bursting was highly correlated with neuronal clustering and process fasciculation. Spike amplitude was negatively correlated with thin branching which was most evident in neurons grown on PEI. These data indicate that factors, which influence adherence of neurons to surfaces, can profoundly impact both neuronal network morphology and electrophysiological activity in vitro.

Epoxy-silane linking of biomolecules is simple and effective for patterning neuronal cultures

Surface chemistry is one of the main factors that contributes to the longevity and compliance of cell patterning. Two to three weeks are required for dissociated, embryonic rat neuronal cultures to mature to the point that they regularly produce spontaneous and evoked responses. Though proper surface chemistry can be achieved through the use of covalent protein attachment, often it is not maintainable for the time periods necessary to study neuronal growth. Here we report a new and effective covalent linking approach using (3-glycidoxypropyl) trimethoxysilane (3-GPS) for creating long term neuronal patterns. Micrometer scale patterns of cell adhesive proteins were formed using microstamping; hippocampal neurons, cultured up to 1 month, followed those patterns. Cells did not grow on unmodified 3-GPS surfaces, producing non-permissive regions for the long-term cell patterning. Patterned neuronal networks were formed on two different types of MEA (polyimide or silicon nitride insulation) and maintained for 3 weeks. Even though the 3-GPS layer increased the impedance of metal electrodes by a factor of 2-3, final impedance levels were low enough that low noise extracellular recordings were achievable. Spontaneous neural activity was recorded as early as 10 days in vitro. Neural recording and stimulation were readily achieved from these networks. Our results showed that 3-GPS could be used on surfaces to immobilize biomolecules for a variety of neural engineering applications.

Combined topographical and chemical micropatterns for templating neuronal networks

In vitro neuronal networks with geometrically defined features are desirable for studying long-term electrical activity within the neuron assembly and for interfacing with external microelectronic circuits. In standard cultures, the random spatial distribution and overlap of neurites makes this aim difficult; hence, many recent efforts have been made on creating patterned cellular circuits. Here, we present a novel method for creating a planar neural network that is compatible with optical devices. This method combines both topographical and chemical micropatterns onto which neurons can be cultured. Compared to other reported patterning techniques, our approach and choice of template appears to show both geometrical control over the formation of specific neurite connections at low plating density and compatibility with microelectronic circuits that stimulate and record neural activity.

Connectivity patterns in neuronal networks of experimentally defined geometry

Experimental control over the position and connectivity pattern of neurons on a surface is of central interest for applications in biotechnology, such as cell-based biosensors and tissue engineering. By restricting neuronal networks to a simple grid pattern, a drastic reduction of network complexity can be achieved relative to networks on homogeneous substrates. Therefore, patterned neuronal networks are also a valuable tool in research on neuronal signal transduction. Microcontact printing has emerged as a simple and efficient method for surface patterning to direct cellular attachment. Although the formation of synaptic contacts in networks of rat cortical cells on such surfaces has been demonstrated, evidence of more complex circuits has been lacking. Triple patch-clamp measurements were performed to analyze connectivity in neuronal networks complying with a grid-shaped micropattern. Cells adhered stringently to the pattern and interconnected to a range of different types of circuits: linear connections, feedback loops, as well as branching and converging pathways. We conclude that in spite of the severe geometric restrictions, a complex repertoire of different connectivity patterns can form along the provided pathways. At the same time, network complexity is kept low enough to allow the study of these patterns at the resolution of single cell-cell contacts.

Synaptic plasticity in micropatterned neuronal networks

Synaptic plasticity is thought to be of central importance for information processing by the nervous system. Additionally, specific neuronal connectivity patterns in the brain are implicated to play a role in the perception, processing and storage of incoming signals. Experimental control over connectivity within functional neuronal networks is therefore a promising approach in research on signal transduction and processing by the nervous system. A cell culture system is presented that allows experimental determination of neuronal connectivity patterns in an in vitro network. Rat embryonic cortical neurons were grown on patterns of extracellular matrix proteins applied to polystyrene substrates by microcontact printing. Cells comply well with the pattern and form synaptic connections along the experimentally defined pathways. Chemical synapses identified by double patch-clamp measurement showed paired pulse depression as well as frequency-dependent depression in response to trains of stimuli. This type of short-term plasticity has similarly been reported by others in brain slices. Thus, the system reproduces features central for neuronal information processing while the architecture of the network is experimentally manipulable. The ability to tailor the geometry of functional neuronal networks offers a valuable tool both for fundamental questions in neuroscientific research and a wide range of biotechnological applications.

Patterned networks of mouse hippocampal neurons on peptide-coated gold surfaces

Patterned networks of hippocampal neurons were generated on peptide-coated gold substrates prepared by microscope projection photolithography and microcontact printing. A 19 amino acid peptide fragment of laminin A (PA22-2) that includes the IKVAV cell adhesion domain was used to direct patterns of cell adhesion in primary culture. Microscale grid patterns of peptide were deposited on gold-coated glass cover slips by soft lithography using "stamps" fashioned from polydimethylsiloxane. Strong coordination bonding between gold atoms on the surface and the sulfur atoms of the N-terminal cysteine residues supported stable adhesion of the peptide, which was confirmed by immunofluorescence using anti-IKVAV antiserum. Dispersed hippocampal cells isolated from neonatal mouse pups were grown on peptide-patterned gold substrates for 7 days. Neurons preferentially adhered to peptide-coated regions of the gold surface and restricted their processes to the peptide patterns. Whole cell recordings of neurons grown in patterned arrays revealed an average membrane potential of -50 mV, as well as the presence of voltage-gated ion conductances. Peptide-modified gold surfaces serve as convenient and effective substrates for growing ordered neural networks that are compatible with existing multi-electrode array recording technology.

Constrained synaptic connectivity in functional mammalian neuronal networks grown on patterned surfaces

The use of ordered neuronal networks in vitro is a promising approach to study the development and the activity of small neuronal assemblies. However, in previous attempts, sufficient growth control and physiological maturation of neurons could not be achieved. Here we describe an original protocol in which polylysine patterns confine the adhesion of cellular bodies to prescribed spots and the neuritic growth to thin lines. Hippocampal neurons in these networks are maintained healthy in serum free medium up to 5 weeks in vitro. Electrophysiology and immunochemistry show that neurons exhibit mature excitatory and inhibitory synapses and calcium imaging reveals spontaneous activity of neurons in isolated networks. We demonstrate that neurons in these geometrical networks form functional synapses preferentially to their first neighbors. We have, therefore, established a simple and robust protocol to constrain both the location of neuronal cell bodies and their pattern of connectivity. Moreover, the long term maintenance of the geometry and the physiology of the networks raises the possibility of new applications for systematic screening of pharmacological agents and for electronic to neuron devices.

Promotion of neural cell adhesion by electrochemically generated and functionalized polymer films

New strategies for spatially controllable cell adhesion have been developed for brain cells from embryonic chicken. They are based on electrochemically active phenol and pyrrole derivatives, and can be used for the selective coverage of electroconductive substrates. Besides mimicking standard laminin-related adhesion promoting mechanisms by means of an electroactive monomer-linked 18-peptide segment from laminin (SRARKQAASIKVAVSADR), electrochemically generated thin (6-30 nm) polymer films of 3-hydroxybenzyl-hydrazine (3HBH) and 2-(3-hydroxyphenyl)-ethanol (2(3HP)E) with and without mechanically entrapped or covalently linked D-lysine have proved to promote cell adhesion in serum-free medium on indium-doped tin oxide (ITO) substrates during the first 6 culturing days in vitro. The effectiveness of the peptide was strongly density-dependent. Unexpectedly, laminin itself or a combination of laminin and poly-D-lysine (PDL) did not promote cell adhesion and neuron differentiation in serum-free cultures on ITO. However, they worked perfectly well on regular polystyrene substrates in serum-free medium or on ITO when medium with serum was used. This finding might suggest that the adhesion efficiency of laminin does not depend only on the kind of medium supplement but also on the type of substrate. In contrast, the adhesion-promoting properties of "artificial" polymeric films seemed to be based on a more direct cell-film interaction, with the film masking the substrate properties.