A novel immunoadsorption device for removing beta2-microglobulin from whole blood

Nanobody-loaded immunosorbent for highly-specific removal of interleukin-17A from blood

Elimination of overproduced cytokines from blood can relieve immune system disorders caused by hypercytokinemia. Due to the central roles of interleukin-17A (IL-17A) plays in regulating the immunity and inflammatory responses in humans, here, a novel immunosorbent containing anti-IL-17A nanobodies (Nbs) was constructed for IL-17A removal from blood. The theoretical maximum adsorption capacity estimated from the Langmuir isotherm is up to 11.55 mg/g gel, which is almost consistent with the saturated adsorption capacity determined in dynamic adsorption. The in vitro plasma perfusion test demonstrated a remarkable adsorptive performance of the Nb-coupled sorbent since more than 75% IL-17A could be eliminated under the plasma/sorbent ratio of 1000:1. These results indicated the Nb-loaded immunosorbent can provide a simple and economic platform technology for immunoaffinity depletion of single or even multiple cytokines from plasma.

Peptide Linker Affecting the Activity Retention Rate of VHH in Immunosorbents

VHH-based immunosorbents are an emerging and promising tool for the removal of toxic substances from plasma. However, the small size of VHHs is a double-edged sword, bringing both benefits and drawbacks to the immunosorbent. The small size of the VHH allows a higher coupling density, while the closer distance to the resin might create steric hindrance for paratope access. The latter could be avoided by inserting a linker between the VHH and the gel attachment site. Here, we report an approach to improve the activity retention of the immobilized VHH by selecting suitable linkers between the VHH and the site-specific immobilization site on the resin. Seven peptide linkers differing in length and flexibility were fused to the VHH and contained the formylglycine generating enzyme (FGE) recognition sequence. These constructs were expressed in the cytoplasm of bacteria and purified, the VHH production yield and affinity for its cognate antigen was measured. Furthermore, the fGly conversion, the immobilization of the aldehyde-containing nanobodies, the immobilization on resin and the antigen binding activity of the VHH-based immunoadsorbents was monitored. The VHH with longer and rigid, proline-rich linkers exhibited good expression yield of approximately 160 mg/L of culture, a fGly conversion of up to 100%, and the highest activity retention rate of more than 68%. This study unveiled two suitable linkers for the preparation of VHH-based immunosorbents that will assist the development of their clinical application.

Nanobody-Based high-performance immunosorbent for selective beta 2-microglobulin purification from blood

Removing β2-microglobulin (β2M) from blood circulation is considered to be the most effective method to delay the occurrence of dialysis-related amyloidosis (DRA). The ideal extracorporeal β2M removal system should be cost-effective, highly specific and having a high capacity. However, the traditional technologies based on size exclusion do not have an adequate specificity, and alternative immunosorbents have limited applications due to low capacity and their high cost. Nanobodies (Nbs), the smallest functional recombinant antibody fragments, offer several advantages to overcome these obstacles. In this study, an anti-β2M Nb with a C-terminal thiol-tag was successfully prepared from E. coli for site-directed and oriented immobilization and usage as capture ligand in a β2M-selective immunosorbent. The prepared immunosorbent showed a high binding capacity of up to 7 mg β2M per mL resin, which is 17 times higher than that of previous studies using single-chain variable antibody fragments (scFv). Furthermore, an exceptional high specificity has been demonstrated as other human serum proteins were not adsorbed during dynamic adsorption experiments. About 80% of the original binding capacity of the immunosorbent was restored after four consecutive easy regenerations, whereas 90% of the original capacity was retained after 1-month storage of the resin. Moreover, the mathematical model fitted very well the in vitro perfusion. The results with this pioneering immunosorbent confirm its possible clinical application and is expected to reach the required clinical effect of immunoadsorption therapy. STATEMENT OF SIGNIFICANCE: Dialysis-related amyloidosis (DRA), associated with the accumulation of β2-microglobulin (β2M), is a serious complication of end-stage kidney disease. Removing β2M from blood circulation by extracorporeal blood purification is considered to be the most effective method to delay the occurrence of DRA. However, the existing methods are incapable to eliminate sufficient quantities of β2M from circulation, either because of lack of specificity, high cost or for low capacity. In this manuscript, we provide a practical and economic immunosorbent based on anti-β2M nanobody for DRA. The prepared immunosorbent was reusable and storable, and demonstrated high specificity and realized a high binding capacity of up to 7 mg β2M per mL resin, which is 17 times higher than that of the previous studies.

One-step Preparation of a VHH-based Immunoadsorbent for the Extracorporeal Removal of β2-microglobulin

Dialysis-related amyloidosis (DRA), which has been widely recognized to be associated with the accumulation of β2-microglobulin (β2-m) in blood, is one of the most common complications in patients receiving long-term dialysis treatment. The most significant side-effect of existing hemodialysis sorbents for the removal of β2-m from blood is the loss of vital proteins due to non-specific adsorptions. Although the traditional antibodies have the capability to specifically remove β2-m from blood, high cost limits their applications in clinics. Single domain antibodies derived from the Camelidae species serve as a superior choice in the preparation of immunoadsorbents due to their small size, high stability, amenability, simplicity of expression in microbes, and high affinity to recognize and interact with β2-m. In this study, we modified the anti-β2-m VHH by the formylglycine-generating enzyme (FGE), and then directly immobilized the aldehyde-modified VHH to the amino-activated beads. Notably, the fabrication is cost- and time-effective, since all the preparation steps were performed in the crude cell extract without rigorous purification. The accordingly prepared immunoadsorbent with VHHs as ligands exhibited the high capacity of β2-m (0.75 mg/mL). In conclusion, the VHH antibodies were successfully used as affinity ligands in the preparation of novel immunoadsorbents by the site-specific immobilization, and effectively adsorbed β2-m from blood, therefore opening a new avenue for efficient hemodialysis.

A receptor-based bioadsorbent to target advanced glycation end products in chronic kidney disease

The accumulation of advanced glycation end products (AGEs) has been reported to be a major contributor to chronic systemic inflammation. AGEs are not efficiently removed by hemodialysis or the kidney of a chronic kidney disease (CKD) patient. The goal of this study was to develop a receptor for AGEs (RAGE)-based bioadsorbent device that was capable of removing endogenous AGEs from human blood. The extracellular domain of RAGE was immobilized onto agarose beads to generate the bioadsorbent. The efficacy of AGE removal from saline, serum, and whole blood; biological effects of AGE reduction; and hemocompatibility and stability of the bioadsorbent were investigated. The bioadsorbent bound AGE-modified bovine serum albumin (AGE-BSA) with a binding capacity of 0.73 ± 0.07 mg AGE-BSA/mL bioadsorbent. The bioadsorbent significantly reduced the concentration of total AGEs in serum isolated from end-stage kidney disease patients by 57%. AGE removal resulted in a significant reduction of vascular cell adhesion molecule-1 expression in human endothelial cells and abolishment of osteoclast formation in osteoclast progenitor cells. A hollow fiber device loaded with bioadsorbent-reduced endogenous AGEs from recirculated blood to 36% of baseline levels with no significant changes in total protein or albumin concentration. The bioadsorbent maintained AGE-specific binding capacity after freeze-drying and storage for 1 year. This approach provides the foundation for further development of soluble RAGE-based extracorporeal therapies to selectively deplete serum AGEs from human blood and decrease inflammation in patients with diabetes and/or CKD.

A Serial Copolymerization Procedure for Manufacturing Immunoadsorption Walls as a Potential Unit in Conjunction With Hemodialysis Filters

A functional immunoadsorption wall for removal of beta-2-microglobulin has been made by partially incomplete two-stage copolymerization of acrylamide with immunoadsorbent. However, a substantial amount of immunoadsorbent needs to be flushed away after the copolymerization process. Thus, to enhance the utilization efficiency of immunoadsorbent, the flushed-away immunoadsorbent was further recovered, and the copolymerization was conducted in series to produce three consecutive immunoadsorption walls in this study. Preliminary removal tests show that similar removal patterns were obtained for these immunoadsorption walls. Although it is not timely to conclude that a clinically applicable immunoadsorption wall has taken shape, the development of a partially incomplete two-stage polymerization method and its associated techniques indeed provide a good basis for large-scale manufacturing immunoadsorption walls.

Assessment of the Stability of an Immunoadsorbent for the Extracorporeal Removal of Beta-2-Microglobulin from Blood

BACKGROUND

Dialysis-related amyloidosis (DRA) is a devastating and costly condition that affects patients with end stage kidney disease. A key feature of DRA is the formation of amyloid fibrils, consisting primarily of beta2-microglobulin. Except for kidney transplantation, conventional kidney replacement therapies, which are based on nonspecific mechanisms, do not adequately address beta2-microglobulin removal. An antihuman beta2-microglobulin single-chain variable region antibody fragment (scFv) was developed to confer specificity to beta2-microglobulin removal during hemodialysis.

METHODS

The scFv was immobilized onto agarose and characterized for beta2m binding capacity, thermal stability at 37 degrees C, regeneration capacity, storage conditions, and sterility.

RESULTS

The beta2-microglobulin binding capacity was 1.3 mg/ml scFv gel. The immunoadsorbent is thermally stable, can be regenerated, stored short-term in 20% ethanol, lyophilized for long-term storage, and withstand process conditions similar to that of a patient's hemodialysis therapy.

CONCLUSIONS

The results support further investigation of immobilized scFvs as a novel tool to remove beta2-microglobulin from blood.

New Approaches to the Formation of a Stationary Phase in an Immunoadsorption Wall

The concept of an immunoadsorption wall, which combines the principles of immunoisolation and immunoadsorption, was proposed in 1999 to remove certain toxins accumulated in patients' blood. However, realization of this concept is obviously handicapped by the inefficient use of immunoadsorbent. This study is intended to improve the use of immunoadsorbent and optimize the formation of a stationary phase in an immunoadsorption wall. Polyacrylamide gel, which has the advantages of being chemically inert, having minimal diffusion effect and reasonable cost, could be considered as the medium of choice for a stationary phase. In this study, new approaches aimed at effective allocation of immunoadsorbent utilizing polyacrylamide gel are attempted. The advantages and disadvantages of these new approaches are discussed according to the preparation, formation, and outcome of a stationary phase. It is hoped that these new approaches could serve as a first step toward building an immunoadsorption wall.

Beta2-microglobulin clearance with super high flux hemodialysis: an ex vivo study

BACKGROUND

Beta2m accumulation induces disease in patients with end-stage renal failure (ESRF). Thus, its removal from patients with ESRF appears desirable. Current dialysis technology, however, has limited effectiveness.

AIMS

To measure beta2m clearance with a novel super high flux membrane.

DESIGN

Ex vivo experimental study.

SETTING

Intensive Care Laboratory of Tertiary institution.

SUBJECTS

Six volunteers.

MEASUREMENTS AND RESULTS

At a blood flow of 300 ml/min, the clearance of beta2-MG increased from 113.5 +/- 38.5 ml/min with a dialysate flow rate of 200 ml/min to 184.8 +/- 61.1 ml/min with a flow rate of 300 ml/min and 195.0 +/- 60.0 ml/min with a 500 ml/min flow rate. The clearance of albumin was 4.5 ml/min with a dialysate flow rate of 200 ml/min, 5.2 ml/min for a flow rate of 300 ml/min and 5.8 ml/min for a flow rate of 500 ml/min.

CONCLUSIONS

High levels of beta2m clearance can be achieved with a super high flux membrane while albumin losses remain limited.

Single-chain antibody fragment-based adsorbent for the extracorporeal removal of β2-microglobulin

BACKGROUND

Dialysis-related amyloidosis (DRA) is a frequent complication of end-stage renal disease (ESRD) that has been associated with the accumulation of beta2-microglobulin (beta2-m). Removal of beta2-m results in the loss of important proteins due to the nonspecific nature of current therapies. Although whole antibodies can potentially be used to confer specificity to beta2-m removal from blood, single-chain variable region (scFv) antibody fragments could potentially offer several advantages as immunoadsorption ligands due to their size, genetic definition, ability to be expressed by microbes, and amenability for in vitro evolution.

METHODS

An antihuman beta2-m scFv was constructed from the BBM.1 hybridoma and expressed by a yeast display vector. The binding affinity of the wild-type scFv fragment was quantified by flow cytometry analysis. Soluble scFv was expressed by a yeast secretion vector, purified, and immobilized onto agarose beads. The binding capacity of the immunoadsorbent was measured by equilibrating samples with saturating quantities of fluorescent beta2-m in serum.

RESULTS

The displayed scFv possessed a nanomolar affinity (KD= 0.008 +/- 0.004 mg-beta2-m/L). The immunoadsorbent exhibited an adsorption site density of 0.41 +/- 0.01 mg beta2-m/mL settled gel. Under saturating conditions, the mass ratio of adsorbed beta2-m to immobilized antibody is 70% greater than any previous literature report for whole antibodies. Preliminary specificity experiments suggest that the scFv-based immunoadsorbent is specific toward human beta2-m.

CONCLUSION

Recombinant DNA technology was successfully used to engineer an scFv-based immunoadsorbent. Use of immobilized scFvs during hemodialysis may minimize loss of valuable proteins and facilitate the removal of macromolecules that are significantly larger than the molecular weight cut-off of the membrane.

Beta-2 microglobulin in ESRD: an in-depth review

Beta-2 microglobulin is the most widely studied low-molecular-weight protein in end-stage renal disease. It is known to cause dialysis-related amyloidosis (DRA), by virtue of its retention when renal function fails, its deposition in tissues, its aggregation into fibrils, and its ability to become glycosylated. The onset of DRA may be protracted by the use of noncellulosic membranes, especially when high-volume hemodiafiltration is used in the treatment of renal failure. Adsorptive methods have been developed to improve the removal of beta-2 microglobulin. There seems to be a relative risk reduction in mortality when patients are treated with dialysis membranes that have a higher clearance of beta-2 microglobulin.

Middle molecules and small-molecular-weight proteins in ESRD: properties and strategies for their removal

Molecular weight has traditionally been the parameter most commonly used to classify uremic toxins, with a value of approximately 500 Da frequently used as a demarcation point below which the molecular weights of small nitrogenous waste products fall. This toxin group, the most extensively studied from a clinical perspective, is characterized by a high degree of water solubility and the absence of protein binding. However, uremia is mediated by the retention of a plethora of other compounds having characteristics that differ significantly from those of the previously mentioned group. As opposed to the relative homogeneity of the nitrogenous metabolite class, other uremic toxins collectively are a very heterogeneous group, not only with respect to molecular weight but also other characteristics, such as protein binding and hydrophobicity. A recently proposed classification scheme by the European Uraemic Toxin Work Group subdivides the remainder of molecules into 2 categories: protein-bound solutes and middle molecules. For the latter group, the Work Group proposes a molecular weight range (500-60,000 Da) that incorporates many toxins identified since the original middle molecule hypothesis, for which the upper molecular weight limit was approximately 2,000 Da. In fact, low-molecular-weight peptides and proteins (LMWPs) comprise nearly the entire middle molecule category in the new scheme. The purpose of this article is to provide an overview of the middle molecule class of uremic toxins, with the focus on LMWPs. A brief review of LMWP metabolism under conditions of normal (and in a few cases, abnormal) renal function will be presented. The physical characteristics of several LMWPs will also be presented, including molecular weight, conformation, and charge. Specific LMWPs to be covered will include beta 2-microglobulin, complement proteins (C3a and Factor D), leptin, and proinflammatory cytokines. The article will also include a discussion of the treatment-related factors influencing dialytic removal of middle molecules. Once these factors, which include membrane characteristics, protein-membrane interactions, and solute removal mechanisms, are discussed, an overview of the different therapeutic strategies used to enhance clearance of these compounds is provided.

Sorbent hemoperfusion in end-stage renal disease: an in-depth review

The excessive mortality in dialysis patients has rekindled interest in research of adsorbent removal of nontraditional uremic toxins. Middle-molecular-weight substances, predominantly small proteins, have been correlated with specific uremic syndromes and implicated in the uremic state. New developments in polymer technology and carbon pyrrolization techniques have produced sorbents possessing mesopores of sufficient size to trap middle-molecular-weight substances. Clinical application of hemoperfusion devices containing these sorbents is early in its development. Studies related to hemoperfusion in uremia are discussed in detail.