Estimation of the native cardiac output from a rotary blood pump flow: in vitro study

Pulsatile Pressure Delivery of Continuous-Flow Left Ventricular Assist Devices Is Markedly Reduced Relative to Heart Failure Patients

Although continuous-flow left ventricular assist devices (CF-LVADs) provide an augmentation in systemic perfusion, there is a scarcity of in vivo data regarding systemic pulsatility on support. Patients supported on CF-LVAD therapy (n = 71) who underwent combined left/right catheterization ramp study were included. Aortic pulsatility was defined by the pulsatile power index (PPI), which was also calculated in a cohort of high-output heart failure (HOHF, n = 66) and standard HF cohort (n = 44). PPI was drastically lower in CF-LVAD-supported patients with median PPI of 0.006 (interquartile range [IQR], 0.002-0.012) compared with PPI in the HF population at 0.09 (IQR, 0.06-0.17) or HOHF population at 0.25 (IQR, 0.13-0.37; p < 0.0001 among groups). With speed augmentation during ramp, PPI values fell quickly in patients with higher PPI at baseline. PPI correlated poorly with left ventricular ejection fraction (LVEF) in all groups. In CF-LVAD patients, there was a stronger correlation with LV dP/dt (r = 0.41; p = 0.001) than LVEF (r = 0.21; p = 0.08; pint < 0.001). CF-LVAD support is associated with a dramatic reduction in arterial pulsatility as measured by PPI relative to HOHF and HF cohorts and decreases with speed. Further work is needed to determine the applicability to the next generation of device therapy.

Mock circulatory test rigs for the in vitro testing of artificial cardiovascular organs

In vitro study plays an important role in the experimental study of cardiovascular dynamics. An essential hardware facility that mimics the blood flow changes and provides the required test conditions, a mock circulatory test rig (MCTR), is imperative for the execution of in vitro study. This paper examines the current MCTRs in use for the testing of artificial cardiovascular organs. Various aspects of the MCTRs are surveyed, including the necessity of in vitro study, the building of MCTRs, relevant standards, general system structure (e.g., the motion and driving, fluid, measurement subsystems), classification, motion driving mechanism of MCTRs, and the considerations for the modelling of the physiological impedance of MCTRs. Examples of the steady and pulsatile flow types of the MCTRs are introduced. Recent developments in MCTRs are inspected and possible future design improvements suggested. This study will help researchers in the design, construction, analysis, and selection of MCTRs for cardiovascular research.

Construction of an Artificial Heart Pump Performance Test System

A hydraulic loop, which simulates pressure/flow response of the human circulatory system, is needed to bench test the various versions of rotary left ventricular assist devices (LVADs). This article describes the design of such a loop and the simulated response of different physiological states, such as a healthy person in sleep, rest, and mild physical activity, and in different pathological states. The loop consists of: (1) pulsatile left and right cardiac simulators; (2) air/water tanks to model the venous and arterial compliances; (3) tygon tubes to model the venous, arterial, and other system flow resistances; and (4) a tuning clamp to model the variation in system resistance characteristics under different cardiac pressure/flow conditions. The simulated responses were compared to the data found in the literature to validate the loop performance prior to LVAD testing.

An Intelligent Remote Monitoring System for Artificial Heart

A web-based database system for intelligent remote monitoring of an artificial heart has been developed. It is important for patients with an artificial heart implant to be discharged from the hospital after an appropriate stabilization period for better recovery and quality of life. Reliable continuous remote monitoring systems for these patients with life support devices are gaining practical meaning. The authors have developed a remote monitoring system for this purpose that consists of a portable/desktop monitoring terminal, a database for continuous recording of patient and device status, a web-based data access system with which clinicians can access real-time patient and device status data and past history data, and an intelligent diagnosis algorithm module that noninvasively estimates blood pump output and makes automatic classification of the device status. The system has been tested with data generation emulators installed on remote sites for simulation study, and in two cases of animal experiments conducted at remote facilities. The system showed acceptable functionality and reliability. The intelligence algorithm also showed acceptable practicality in an application to animal experiment data.

Design and Initial Testing of a Mock Human Circulatory Loop for Left Ventricular Assist Device Performance Testing

A mock circulatory loop, which simulates the human circulatory system, is needed to bench test the various versions of continuous flow (CF) left ventricular assist devices (LVADs). This article describes the design and initial testing of such a loop. The loop consists of: (1) pulsatile left and right cardiac simulators; (2) air/water tanks to model the venous and arterial compliances; (3) tygon tubes to model the venous, arterial, and other system flow resistances; and (4) a tuning clamp to model the variation in system resistance characteristics under different cardiac pressure/flow conditions. Several loop measurements were carried out without an LVAD to verify the cardiovascular modeling of a healthy person in sleep, rest, and physical activity, and in different pathological states, and compared to the data found in the literature to validate the loop performance prior to LVAD testing.

Estimation of coupled assist flows in a moving-actuator bi-ventricular assist device using interventricular pressure

An assist flow estimation scheme for a moving-actuator biventricular assist device (MA-BVAD) using interventricular pressure (IVP) has been developed. The scheme uses a waveform feature parameter of IVP, peak IVP time (PIT), for estimation of the filling volumes of both left and right blood sacs simultaneously. In a regression analysis on data from an in vivo test in an 85 Kg male calf for 20 days, the PIT was found to have high correlation with the blood sac filling volume (R=0.883: left filling volume, R=0.967: right filling volume). A conceptual equation hypothesizing this correlation between PIT and filling volume was established based on the observation and the unknown parameters were identified using least squares parameter optimization. The estimation equation identified proved highly accurate (R=0.916 for left flow, R=0.970 for right flow). The accuracy of the estimation scheme promises very good practical applicability.

Analysis of the arterial blood pressure waveform during left ventricular nonpulsatile assistance in animal models

When the rotary blood pump is used as a left ventricular assist device (LVAD), the arterial blood pressure waveform changes with the LVAD condition. Based on evidence from an in vitro study, the change of the arterial blood pressure waveform during left ventricular assistance was evaluated using animal models. After the left pleural cavity was opened through the fifth intercostal space under general anesthesia, a rotary blood pump was implanted as an LVAD into 6 healthy calves. The direct left carotid arterial blood pressure waveform was measured and recorded by an oscilloscope. The Fast Fourier Transform technique was utilized to analyze the arterial blood pressure waveform and calculate the pulsatility index (PI) and the pulse power index (PPI). Similar to the in vitro study, the PI and PPI decreased exponentially with the increase of the LVAD assist ratio. By using this analysis methodology, a physiologically effective ventricular assistance might be achieved.

Analysis of the arterial blood pressure waveform using Fast Fourier Transform technique during left ventricular nonpulsatile assistance: in vitro study

The arterial blood pressure waveform is variable during left ventricular assistance. The aim of this study is to examine the correlation between the left ventricular assist device (LVAD) condition and the arterial blood pressure waveform in a fixed cardiac output condition using a mock circuit. This mock circulation loop was composed of an aortic compliance chamber, a left atrial compliance chamber, a pneumatic pulsatile pump as a native heart, and a rotary blood pump representing the LVAD with left atrial drainage. The Fast Fourier Transform technique was utilized to analyze the arterial blood pressure waveform and calculate the pulsatility index (PI) and the pulse power index (PPI). The PI and PPI decreased with the increase of the LVAD rotational speed, exponentially. There was a significant negative correlation between the PI, PPI, and the LVAD rotational speed, flow rate, and assist ratio. The best correlation was observed between the PPI and the assist ratio (r = 0.986). From this viewpoint, an ideal LVAD condition may be estimated from the pulsatility change of the arterial blood pressure waveform.