The Impact of Compounds Extracted from Wood on the Quality of Alcoholic Beverages

The production of some alcoholic beverages very often requires the use of wood from various tree species to improve the quality parameters (smell, taste, and color) of the drink. The review discusses the types of wood used in the production of wines, beers, and flavored vodkas. Changes occurring in wood during the process of toasting barrels or wood chips are described. The compounds derived from wood that shape the aroma, taste, and color of alcoholic beverages are presented. Depending on their origin, they were classified into compounds naturally occurring in wood and those formed as a result of the thermal treatment of wood. Next, the influence of the presence of wood on the quality of alcoholic beverages was described, with particular emphasis on wine, beer, whisky, and brandy. The final part of the article presents innovative techniques using wood to impart qualitative features to alcoholic beverages.

Identification and Distribution of New Impact Aldehydes in Toasted Oak Wood (Quercus petraea)

The purpose of this study was to identify aroma compounds associated with the toasting intensity of oak wood (Quercus petraea). Crude organic extracts from oak wood samples (toasted at different temperature-time couples) were analyzed by a sensory-guided approach using GC-O-TOFMS, followed by purification with semipreparative HPLC (reverse phase). This approach revealed two specific odorous zones (OZs) reminiscent of metal and puff pastry. The first OZ was identified as trans-4,5-epoxy-(E)-2-decenal (1) by coinjection of the commercial product, whereas identification of (2E,4E,6Z)-nonatrienal (2) associated with puff pastry OZ was validated by a multistep chemical synthesis approach (Wittig reaction) followed by semipreparative HPLC purification (chiral phase). Their detection thresholds in model wine solution were 60 ng/L (1) and 16 ng/L (2). Their distribution in toasted oak wood samples [GC-NCI-MS (NH₃) analysis] ranged from some ng/g to 210 ng/g for (1) and 85 ng/g for (2). Finally, additional sensory experiments demonstrated the impact of newly identified aldehydes in toasted oak wood.

Alternative Woods in Oenology: Volatile Compounds Characterisation of Woods with Respect to Traditional Oak and Effect on Aroma in Wine, a Review

The interest of winemakers to find new woods that can give their wines a special personality and the need for cooperage wood have led to the use of other woods than traditional oak. The aroma of wines is undoubtedly one of the quality factors most valued by consumers. Volatile compounds from wood are transferred to wines during ageing. The type and quantity of aromas in wood depend on several factors, with the species, origin and cooperage treatments, particularly toasting, being very important. The transfer of volatile compounds to the wine depends not only on the wood but also on the wine itself and the type of ageing. This review therefore aims to recapitulate the volatile composition of alternative oenological woods at different cooperage stages and to compare them with traditional woods. It also summarises studies on the effect of wine aromas during ageing both in barrels and with fragments of alternative woods. In summary, it is observed that both woods and wines aged with alternative species of the Quercus genus present the same volatile compounds as traditional ones, but differ quantitatively; however, non-Quercus woods also differ qualitatively.

Alternative Woods in Enology: Characterization of Tannin and Low Molecular Weight Phenol Compounds with Respect to Traditional Oak Woods. A Review

Wood is one of the most highly valued materials in enology since the chemical composition and sensorial properties of wine change significantly when in contact with it. The need for wood in cooperage and the concern of enologists in their search for new materials to endow their wines with a special personality has generated interest in the use of other Quercus genus materials different from the traditional ones (Q. petraea, Q. robur and Q. alba) and even other wood genera. Thereby, species from same genera such as Q. pyrenaica Willd., Q. faginea Lam., Q. humboldtti Bonpl., Q. oocarpa Liebm., Q. stellata Wangenh, Q. frainetto Ten., Q. lyrata Walt., Q. bicolor Willd. and other genera such as Castanea sativa Mill. (chestnut), Robinia pseudoacacia L. (false acacia), Prunus avium L. and P. cereaus L. (cherry), Fraxinus excelsior L. (European ash) and F. americana L. (American ash) have been studied with the aim of discovering whether they could be a new reservoir of wood for cooperage. This review aims to summarize the characterization of tannin and low molecular weight phenol compositions of these alternative woods for enology in their different cooperage stages and compare them to traditional oak woods, as both are essential to proposing their use in cooperage for aging wine.

Use of Oak and Cherry Wood Chips during Alcoholic Fermentation and the Maturation Process of Rosé Wines: Impact on Phenolic Composition and Sensory Profile

There is a lack of knowledge about the use of different wood species on rosé wine production. Thus, this work focused on the impact of the addition of wood chips from oak and cherry trees during the alcoholic fermentation and maturation process on rosé wine characteristics. Therefore, phenolic composition and sensory characteristics were monitored during the rosé wines' production. The use of wood chips during alcoholic fermentation induced a significant increase of phenolic content in rosé musts. During rosé wine maturation, the wood chip contact induced significantly higher values of colored anthocyanins, color intensity, and polymeric pigments, and significantly lower values of color hue in the corresponding rosé wines. In terms of sensory profile, a tendency for lower scores of "overall appreciation" were attributed to control rosé wine, while significantly higher scores for "color intensity" descriptor were attributed to all rosé wines matured in contact with wood chips. For the majority of phenolic parameters and individual phenolic compounds quantified, a clear and specific influence of the use of oak and cherry wood chips was not detected, except for (+)-catechin, where the rosé wines produced in contact with cherry chips showed the highest values. This study provides relevant information for winemakers about the impact of the use of wood chips on rosé wine quality.

Acacia, cherry and oak wood chips used for a short aging period of rosé wines: effects on general phenolic parameters, volatile composition and sensory profile

BACKGROUND

There is a restricted knowledge about the potential impact of the use of different wood chip species on the rosé wine aging process. Thus, the aim of this work was to evaluate the general phenolic parameters, aroma composition and sensory profile of rosé wines during a short maturation (20 aging days) in contact with wood chips from oak, acacia and cherry. In addition, the different wood chips were added to a rosé wine without a previous clarification process (unfined wine) and to a rosé wine submitted to a clarification process (fined wine).

RESULTS

For the brief maturation time considered, the use of different wood chips induced a tendency for an increase of phenolic content, in particular for unfined rosé wine aged in contact with acacia chips. For volatile composition, the differentiation was clearer for aldehyde compounds group. Regarding sensorial overall appreciation the panel test preferred the unfined rosé wine aged in contact with acacia wood chips.

CONCLUSIONS

The results show that, in general, the use of different wood chip species (acacia, cherry and oak) for a brief maturation time of rosé wines could play an important role in rosé wine characteristics, in particular in their phenolic composition. © 2019 Society of Chemical Industry.

Different Woods in Cooperage for Oenology: A Review

Contact of wine with wood during fermentation and ageing produces significant changes in its chemical composition and organoleptic properties, modifying its final quality. Wines acquire complex aromas from the wood, improve their colour stability, flavour, and clarification, and extend their storage period. New trends in the use of barrels, replaced after a few years of use, have led to an increased demand for oak wood in cooperage. In addition, the fact that the wine market is becoming increasingly saturated and more competitive means that oenologists are increasingly interested in tasting different types of wood to obtain wines that differ from those already on the market. This growing demand and the search for new opportunities to give wines a special personality has led to the use of woods within the Quercus genus that are different from those used traditionally (Quercus alba, Quercus petraea, and Quercus robur) and even woods of different genera. Thus, species of the genus Quercus, such as Quercus pyrenaica Willd., Quercus faginea Lam., Quercus humboldtti Bonpl., Quercus oocarpa Liebm., Quercus frainetto Ten, and other genera, such as Robinia pseudoacacia L. (false acacia), Castanea sativa Mill. (chestnut), Prunus avium L. and Prunus cereaus L. (cherry), Fraxinus excelsior L. (European ash), Fraxinus americana L. (American ash), Morus nigra L, and Morus alba L. have been the subject of several studies as possible sources of wood apt for cooperage. The chemical characterization of these woods is essential in order to be able to adapt the cooperage treatment and, thus, obtain wood with oenological qualities suitable for the treatment of wines. This review aims to summarize the different species that have been studied as possible new sources of wood for oenology, defining the extractable composition of each one and their use in wine.