Camembert-Type Cheese with Sweet Buttermilk: The Determination of Quality Properties and Microstructure

Camembert is a type of surface-mold-ripened soft cheese traditionally produced from cow's milk. Buttermilk, a by-product of butter production with beneficial nutritional and technological properties, is increasingly being used in various applications, including cheesemaking. Therefore, this study aimed to use sweet buttermilk (BM) in combination with milk at concentrations of 10% (w/w) (BM10) and 20% (w/w) (BM20) for the production of Camembert-type cheese. A control cheese made entirely from milk was also produced. The cheese samples underwent a 28-day ripening process during which their composition, acidity, water activity, color, and sensory properties were examined at 1-week intervals. The microstructure of the matured Camembert-type cheese samples was analyzed using scanning electron microscopy (SEM), and their texture was evaluated. The production yield of BM20 cheese (18.03 ± 0.29 kg/100 kg) was lower (p < 0.05) than that of the control (19.92 ± 0.23 kg/100 kg), with BM10 showing the distinctly lowest yield (14.74 ± 0.35 kg/100 kg). The total solid and fat content of BM Camembert-type cheese samples was lower than the control. However, the total protein content in cheese BM20 at the end of the ripening period was the same as that of the control. The changes in acidity in all samples were typical for Camembert cheese, and water activity was high (above 0.92). The sensory properties of all samples were characteristic of the cheese type, while the color of BM cheese samples differed from the control. The microstructure of BM10 and BM20 cheese variants was similar, namely homogenous and less porous compared to the control. In terms of texture, the BM samples had significantly lower hardness, adhesiveness, and gumminess. This study indicates that sweet BM, particularly at a concentration of 20%, may be effectively used in the production of Camembert-type cheese.

Microwave vacuum drying of dairy cream: Processing, reconstitution, and whipping properties of a novel dairy product

Traditional ways to preserve cream involve processing it into butter, butter oil, or frozen storage. These technologies do not preserve the unique functionality of cream with respect to whipping or processing into butter. In this work, microwave vacuum drying (MVD) was investigated as a method to manufacture dehydrated cream. Dehydrated cream microstructure, color, and free fat were evaluated using scanning electron microscopy, colorimetry, and solvent extraction, respectively. Effects of homogenization on reconstituted cream microstructure and functionality were investigated using confocal laser scanning microscopy, color, particle sizing, and texture analysis of whipped cream. Reconstituted MVD cream whipped faster, and the whipped cream was more cohesive and firmer when 2-step homogenization at 3.5/7 MPa was used. Fat globules in reconstituted MVD cream were covered by phospholipids, explaining MVD cream's similar functionality compared with pasteurized cream. These results may foster the development of novel shelf stable and highly functional dairy products using MVD.

High Pressure and Pasteurization Effects on Dairy Cream

Dairy cream, a common ingredient in various dishes and food products, is susceptible to rapid microbial growth due to its high water activity (≈0.97) and pH (≈6.7). Thus, it requires proper processing conditions to ensure food safety and extend shelf life. High-pressure processing (HPP) has emerged as a nonthermal food pasteurization method, offering an alternative to conventional heat-based techniques to obtain tastier, fresh-like, and safe dairy products without undesirable heat-induced alterations. This study assessed the impact of HPP (450 and 600 MPa for 5 and 15 min at 7 °C) and thermal pasteurization (75 °C for 15 s) on the microbiological and physicochemical attributes of dairy cream immediately after processing and throughout refrigerated storage (4 °C). HPP-treated samples remained microbiologically acceptable even on the 51st day of storage, unlike thermally pasteurized samples. Moreover, HPP decreased inoculated Escherichia coli and Listeria innocua counts by more than 6 log units to undetectable levels (1.00 log CFU/mL). pH, color (maximum variation of ΔE* up to 8.43), and fatty acid profiles remained relatively stable under varying processing conditions and during storage. However, viscosity exhibited higher values for HPP-treated samples (0.028 ± 0.003 Pa·s) compared to thermally processed ones (0.016 ± 0.002 Pa·s) by the 28th day of storage. Furthermore, volatile compounds (VOCs) of all treated samples presented a tendency to increase throughout storage, particularly acids and aliphatic hydrocarbons. These findings show HPP's potential to significantly extend the shelf life of highly perishable dairy cream by at least 15 days compared to thermal pasteurization.

Interaction between Bovine Serum Albumin in Fresh Milk Cream and Encapsulated and Non-Encapsulated Polyphenols of Tamarillo

The fortification of dairy products with polyphenols is known to deliver additional health benefits. However, interactions between polyphenols may form complexes and cause a loss of functionality overall. This study aimed to investigate potential interactions between polyphenols, in encapsulated and non-encapsulated forms, extracted from tamarillo fruit and bovine serum albumin (BSA) from fresh milk cream. Fortification with tamarillo extract was made at 1, 2 and 3% (w/w), and the resultant changes in physicochemical, rheological and functional properties were studied. With an increase in fortification, the absorbance of protein-ligand in the protein-polyphenol complex was decreased by up to 55% and 67% in UV and fluorescent intensities, respectively. Chlorogenic acid and kaempferol-3-rutinoside were more affected than delphinidin-3-rutinoside and pelargonidin-3-rutinoside. Static quenching was the main mechanism in the fluorescence spectra. Tryptophan and tyrosine residues were the two major aromatic amino acids responsible for the interactions with BSA. There were at least three binding sites near the tryptophan residue on BSA. The rheological property remained unaffected after the addition of non-encapsulated tamarillo extracts. Antioxidant capacity was significantly decreased (p < 0.05) after the addition of encapsulated extracts. This may be explained by using a low concentration of maltodextrin (10% w/w) as an encapsulating agent and its high binding affinity to milk proteins.

Properties of Sweet Buttermilk Released from the Churning of Cream Separated from Sheep or Cow Milk or Sheep Cheese Whey: Effect of Heat Treatment and Storage of Cream

The objective of the study was to compare the buttermilk released from the churning of sweet cream separated from sheep milk (BSM) or whey (BSW) with the buttermilk from sweet cow milk cream (BCM). Additional experimental factors were the heat treatment (68 °C for 10 or 30 min) and storage of cream (refrigeration or freezing). The composition of BSM was the most advantageous in terms of non-fat solids, protein-which was the most abundant solid component-casein, calcium and phosphorus contents. No significant differences were observed in the phospholipids (PL) content of BSM, BCM and BSW. Antioxidant potential and emulsion stability (ES) of BSM were the highest. The radical scavenging activity (RSA) of BSW was high opposite to chelating activity (CA). Some functional properties of BSW were similar to those of BSM and BCM. The freezing of cream affected the churning, the fat content, the soluble nitrogenous fraction at pH 4.6 (WSN) and some functional properties of buttermilk, but not in a consistent manner. The properties of BSM were marginally affected or unaffected by the use of frozen cream. The freezing of whey cream caused significant changes (p < 0.05) in the protein profile and the functional behaviour of BSW. Cream heat treatment affected the WSN of BSW opposite to its sweet cream counterparts.

The Characteristics of Quark Cheese Made from Buttermilk during Refrigerated Storage

The dairy industry releases huge amounts of by-products. One of them is buttermilk, obtained during butter production. This by-product is characterized by high nutritional and technological value and is finding more and more applications in food production. This study aimed to produce and analyze the characteristics of quark cheese obtained entirely from buttermilk during 3-week refrigerated (4 ± 1 °C) storage. Four kinds of sour buttermilk were used: two from industrial butter production, and another two from butter production at laboratory scale. Laboratory buttermilk differs in the kind of starter culture used in the production. The evaluation of cheese quality properties included physicochemical analyses, texture measurement, and sensory assessment. The results showed that the kind of buttermilk used in production influences the acidity, total solids, textural characteristics, and fat content of the obtained quark cheeses. All obtained cheeses had very high sensory quality throughout the storage period. The study indicates that buttermilk may be successfully used as a substitution for milk in quark cheese production.

Whipping properties of recombined, additive-free creams

There is increasing industrial interest in the use of the milkfat globule membrane as a food ingredient. The objective of this research was to determine whether the aerosol whipping performance of cream separated into butter and buttermilk, and then recombined, would perform in a manner similar to untreated cream. Churning of cream tempered to different solid fat contents was used to separate butter from buttermilk, which were then recombined at the same ratios as the initial extraction yield, or with 25% extra buttermilk. Differences in milkfat globule size distributions among the recombined creams were apparent; however, their whipping behavior and overrun were similar. Importantly, all recombined creams did not yield properties similar to the original cream, indicating that the unique native milkfat globule membrane structure plays a role in cream performance well beyond its simple presence.

Buttermilk ice cream-New method for buttermilk utilization

Buttermilk, the by‐product of butter production, due to good technological features and excellent nutritional and health‐promoting properties finds more and more applications in food industry. Considerable amount of polar lipids causes that buttermilk exhibits emulsifying and stabilizing effect and may be used to improve the product quality. The study aimed to design new kind of ice cream, in which all milk is substituted by buttermilk. Within the study, we compared physicochemical parameters, color, texture, and sensory properties of control milk ice cream (C), ice cream from sweet buttermilk (SB), and ice cream from cultured buttermilk (CB). Ice cream was tested on the production day, and some characteristics were tested also after 14 and 28 days of storage at −18 ± 1°C. The study showed that samples of ice cream from cultured buttermilk had the highest acidity and were the most resistant to melting. The samples did not differ in over‐run value. The use of buttermilk influenced the texture of ice cream and product from sweet buttermilk had the highest stickiness during the storage. The color analysis showed that the highest lightness parameter had ice cream from cultured buttermilk, while samples from sweet buttermilk had the most greenish‐yellow characteristics. All the obtained products had good sensory characteristics, only cultured buttermilk ice cream slightly deteriorated after 28 storage days. Good quality properties cause that buttermilk may be successfully used as substitution of milk in ice‐cream formula and may improve its quality by exhibiting of some emulsifying stabilizing effect.

Chemical, sensory, and functional properties of whey-based popsicles manufactured with watermelon juice concentrated at different temperatures

The effects of the concentration of watermelon juice at different temperatures (45, 55, or 65 °C) on the physicochemical and sensory characteristics, antioxidant capacity, and volatile organic compounds (VOCs) of whey-based popsicles were investigated. Total phenolic content, lycopene, citrulline, VOCs, melting rate, instrumental colour, antioxidant capacity, and the sensory characteristics (hedonic test and free listing) were determined. The temperature led to a significant decrease in bioactive compounds (total phenolics, lycopene, and citrulline). The popsicle manufactured with reconstituted watermelon juice concentrated to 60 °Brix at 65 °C presented higher antioxidant capacity and was characterized by the presence of alcohols, aldehydes and ketones and presented a similar acceptance to the untreated popsicle (except for flavour). It is possible to combine whey and concentrated watermelon juice for the manufacture of bioactive-rich popsicles, using the concentration temperature of 65 °C as a suitable processing condition for potential industrial applications.