Predicted performance of a tangential viewing hard x-ray camera for the DIII-D high field side lower hybrid current drive experiment

High field side launch of lower hybrid current drive (LHCD) has improved accessibility and penetration over low field side launch on DIII-D. Simulations predict single pass absorption under a wide range of plasma conditions. Hard x-ray (HXR) measurement of LHCD generated fast electron bremsstrahlung (50-250 keV) will validate wave propagation and absorption. Emissivity profiles are recovered from one-dimensional inversion of HXR brightness to determine LH damping location, fast electron slowing down time, and some indication of the fast electron energy. The camera will be implemented by populating 32 tangential sightlines of the existing Gamma Ray Imager with Kromek SPEAR^TM Cadmium Zinc Telluride (CZT) detectors sensitive to 10-1000 keV photons with 10 keV energy resolution. Expected count rates allow for <0.5 ms time resolution. Pulses are processed using 50 ns shaping time Cremat CR-200 Gaussian shaping modules and are digitized by 25 MHz D-TACQ ACQ216 digitizers. The performance of the HXR camera is evaluated by comparing predicted fast electron density profiles and inverted synthetic brightnesses obtained from the ray-tracing/Fokker-Planck codes GENRAY/CQL3D. Inversions closely matched predicted fast electron profiles for a range of experimental parameters.

Tests of advanced RF off-axis current drive techniques on DIII-D

The establishment of reactor-relevant radiofrequency heating and current drive techniques is a focus of work on DIII-D in the next five-year period. This paper gives an overview of the planned experimental work in the areas of (1) nearly vertically launched ECCD, (2) ‘helicon’ (whistlers or fast waves in the lower hybrid range of frequencies) current drive, and (3) high-field-side-launch (HFS) lower hybrid (slow wave) current drive. Each of these techniques addresses the need for efficient off-axis current drive for a steady-state tokamak reactor to supplement the bootstrap current and to provide current profile control, and each will be experimentally assessed at a coupled power level of ~1 MW on DIII-D in the next few years.