Optimal endothelialisation of a new compliant poly(carbonate-urea)urethane vascular graft with effect of physiological shear stress

A Material Conferring Hemocompatibility

There is a need for biomimetic materials for use in blood-contacting devices. Blood contacting surfaces maintain their patency through physico-chemical properties of a functional endothelium. A poly(carbonate-urea) urethane (PCU) is used as a base material to examine the feasibility of L-Arginine methyl ester (L-AME) functionalized material for use in implants and coatings. The study hypothesizes that L-AME, incorporated into PCU, functions as a bioactive porogen, releasing upon contact with blood to interact with endothelial nitric oxide synthase (eNOS) present in blood. Endothelial progenitor cells (EPC) were successfully cultured on L-AME functionalized material, indicating that L-AME -increases cell viability. L-AME functionalized material potentially has broad applications in blood-contacting medical devices, as well as various other applications requiring endogenous up-regulation of nitric oxide, such as wound healing. This study presents an in-vitro investigation to demonstrate the novel anti-thrombogenic properties of L-AME, when in solution and when present within a polyurethane-based polymer.

Using Polymeric Scaffolds for Vascular Tissue Engineering

With the high occurrence of cardiovascular disease and increasing numbers of patients requiring vascular access, there is a significant need for small-diameter (<6 mm inner diameter) vascular graft that can provide long-term patency. Despite the technological improvements, restenosis and graft thrombosis continue to hamper the success of the implants. Vascular tissue engineering is a new field that has undergone enormous growth over the last decade and has proposed valid solutions for blood vessels repair. The goal of vascular tissue engineering is to produce neovessels and neoorgan tissue from autologous cells using a biodegradable polymer as a scaffold. The most important advantage of tissue-engineered implants is that these tissues can grow, remodel, rebuild, and respond to injury. This review describes the development of polymeric materials over the years and current tissue engineering strategies for the improvement of vascular conduits.

Review: Endothelial Cells Cultured on Engineered Vascular Grafts Are Able to Transduce Shear Stress

In vitro endothelialization of small-diameter vascular prostheses confluently lined with cultured autologous endothelial cells (ECs) before clinical implantation improves their patency. Many authors have studied the effects of shear stress on ECs seeded on various substrates showing activation of mitogen-activated protein (MAP) kinases. Very few studies have reported any functional EC response to shear stress when they are seeded on vascular grafts. The purpose of this in vitro study was to investigate whether ECs were able to transduce shear stress. Human saphenous vein ECs were seeded on 6 mm fibrin-glue-coated grafts, then submitted to 15 dyn/cm(2) for 10, 30, and 120 min. Cell lysates were submitted to Western blot analysis to detect phosphorylated ERK 1/2 and p38. ERK 1/2 activation was observed at 10 min (1.6 fold) followed by a lower activation than under static conditions at 30 and 120 min. Shear stress induced a significant increase in p38 phosphorylation (2.5 fold) at 10 and 30 min, decreasing at 120 min. Thus, ECs are able to transduce shear stress in an in vitro model in closed clinical conditions, but the ERK 1/2 and p38 temporal activation profile is different. We provide new insights into the validity of the vascular tissue engineering approach.

Development of a hybrid cardiovascular graft using a tissue engineering approach

Tissue engineering of endothelial cells (EC) and chemical engineering with anticoagulant moieties has been undertaken in order to improve prosthetic graft patency and thrombogenicity. This was done by covalently bonding a compliant poly(carbonate-urea)urethane graft (MyoLink) with arginine-glycine-aspartate (RGD) or/and heparin (Hep) to ascertain whether EC retention could be improved. The retention of these moieties and EC was assessed after exposure to pulsatile flow. We covalently bonded RGD, Hep, and RGD/Hep onto the luminal surface of MyoLink using spacer arm technology. Narrow-beam X-ray photoelectron spectroscopy was carried out to check the efficiency of the bonding. EC were radiolabeled and seeded onto native MyoLink and with 1) RGD-, 2) Hep-, and 3) RGD/Hep-bonded grafts and exposed to shear stress in a physiological flow circuit for 6 h, which reproduces femoral artery flow waveforms and pulsatility. Results were recorded on a gamma camera imaging system. Viability of cells was tested with a modified Alamar Blue assay (ABA) and scanning electron microscopy for morphological appearance of seeded cells. Experiments were repeated (n=6). RGD, Hep, and RGD/Hep were bonded together in a uniform distribution on the luminal surface of each graft type, and bioactivity of each moiety covalently bonded was very high. In the flow circuit, there was exponential cell retention for the first 60 min of flow for all the grafts, but after 6 h of exposure to pulsatile flow the RGD/Hep-bonded graft had a significantly better cell retention rate than native MyoLink (75.7%+/-2.3 vs. 60.5+/-10.1, P<0.05). ABA test showed that all the seeded cells postexposure to flow were viable, and significantly higher metabolic activity was recorded on a RGD/Hep-bonded graft than with MyoLink-seeded graft (P<0.01). Using RGD/Hep covalently bonded onto graft surfaces improves cell retention and provides an antithrombogenic surface for initial blood flow in vivo until full EC activity develops postseeding. This would allow the development and further improvement of hybrid grafts.

Improving the clinical patency of prosthetic vascular and coronary bypass grafts: the role of seeding and tissue engineering

In patients requiring coronary or peripheral vascular bypass procedures, autogenous vein is currently the conduit of choice. If this is unavailable, then a prosthetic material is used. Prosthetic graft is liable to fail due to occlusion of the graft. To prevent graft occlusion, seeding of the graft lumen with endothelial cells is undertaken. Recent advances have also looked at developing a completely artificial biological graft engineered from the patient's cells with properties similar to autogenous vessels. This review encompasses the developments in the two principal technologies used in developing hybrid coronary and peripheral vascular bypass grafts, that is, seeding and tissue engineering.