Reconstructive surgery for complete talus extrusion using the sandwich block arthrodesis: a report of 2 cases

Rearfoot and Ankle Dislocations

Subtalar dislocations, ankle dislocations, and total talar dislocations are high-energy injuries. As such, there may be associated osseous or soft tissue injuries that can be diagnosed with advanced imaging such as computed tomography (CT) or MRI. With closed injuries, closed reduction may require sedation or general anesthesia, flexion of the knee to release the tension of the gastrocnemius-soleus complex, distraction is applied, the deformity is accentuated, then the deformity is corrected. Open injuries are usually associated with a higher level of energy and a higher rate of infection. It is important to thoroughly irrigate and debride open dislocations both before and after reduction.

Ankle Height Preservation with the Hind Foot Nail and Iliac Crest Bone Blocks in Patients with Sequelae of Partial or Complete Talus Bone Loss

Introduction:

The management of talus bone loss in trauma is difficult and unsatisfactory. This study assessed whether the height of the ankle was preserved when entire or partial talar bone loss was managed with hind foot intramedullary nail augmented with autogenous rectangular or trapezoidal cortico-cancellous bone blocks from the iliac crest in the presence of active or latent infection.

Materials and methods:

Four patients were included in the study from January 2011 to December 2017. In the first stage, all four patients underwent debridement of the ankle, total or partial excision of the talus, and antibiotic-loaded bone cement spacer (ALBC) placement in the ankle joint. The second stage of the arthrodesis procedure was initiated six to eight weeks after the primary procedure, where these patients underwent arthrodesis with hindfoot nail and bone blocks from the iliac crest.

Results:

All patients were followed-up for an average of 17.6 months (range 12.0 – 32.0 months). The arthrodesis site had united in all these four patients. The AOFAS scores were satisfactory in all patients. One patient underwent nail removal after the arthrodesis site had united.

Conclusions:

The hind foot nail with iliac crest bone block maintains the ankle height and ensures successful arthrodesis. In patients with partial/ complete bone loss with suspicion or confirmation of infection, staging the arthrodesis procedure minimises the chance of complications.

Talar Dislocation: Is Reimplantation a Safe Procedure?

Total or complete dislocation of the talus is a triple dislocation of the tibiotalar, talocalcaneal, and talonavicular joints. It is a rare injury and is considered to be 1 of the most disabling ankle injuries. In light of the literature, there is a lack of consensus on their surgical treatment. The primary objective of this retrospective case series was to assess the long-term clinical and radiological outcomes of 5 patients who underwent talar reimplantation for total talar dislocation. From 2005 to 2011, 5 patients were admitted in emergency care unit with a total talar dislocation. The talar dislocation was surgically reduced and stabilized by a temporary internal fixation. Patients were reviewed with a mean follow-up of 60 months (48-70 months). Clinical and radiological evaluations were performed at the last follow-up. Despite 3 opened-dislocation (60%), none had infection. Three patients obtained subnormal biomechanical function with an American Orthopedic Foot and Ankle Score of 60 to 70/100. Two others patients (40%) underwent a secondary ankle arthrodesis because of avascular necrosis of the talus. Signs of necrosis appeared at 15 months and 24 months. Talar reimplantation should be attempted despite the risk of avascular necrosis: restoration of the talus in the ankle maintains normal hindfoot anatomy and preserves bone stock for future function or a subsequent surgical procedure. Patients should be informed of the risk of secondary surgery. Opened-dislocation seems to be a major risk factor of avascular necrosis, and surgeon must take care to keep soft tissues attached.

Retrograde Tibial Nail and Trabecular Titanium Spacer Block for the Treatment of Missing Talus: A Rare Case Report

Astragalus enucleation with complete bone loss is a rare pathology, and there is no current classification or treatment protocol. A 34-year-old woman sustained an open total enucleation of the talus without bone recovery in a motorcycle accident. Initially, she was treated at the emergency department with wound cleaning, surgical debridement, and external fixation with intravenous antibiotic therapy. Definitive treatment was delayed 8 weeks because of acute infection, which was treated with lavage, surgical debridement, and specific antibiotic therapy. To avoid leg-length discrepancy, we performed a tibiocalcaneal arthrodesis using a trabecular titanium spacer block with retrograde intramedullary nailing. We report satisfactory clinical, functional, and radiological results at 24 months after surgery. No complications or dysmetria was reported. The treatment of choice after an open talar enucleation with bone loss is the tibiocalcaneal arthrodesis, and it can be done isolated or with an associated autologous bone graft or allograft. The most frequent complications are infection, pseudoarthrosis, and, if the talar space is not adequately filled, dysmetria. We present a new way of filling this defect, which is not described in the current literature, using a trabecular titanium spacer block (indicated for revision of ankle arthrodesis of the hindfoot) together with retrograde intramedullary nailing, with promising results.

Use of Three-Dimensional Printing Techniques in the Management of a Patient Suffering From Traumatic Loss of the Talus

Traumatic loss of the whole talus is extremely rare, and its possible treatment options are limited. Our experience of treatment of a 30-year-old male suffering from traumatic loss of the whole talus with the insertion of an anatomical antibiotic-loaded talus cement spacer using 3-dimensional printing techniques as an interim measure was reviewed and reported. A young motorcyclist was brought to the emergency department after a road traffic accident. He sustained multiple injuries including traumatic loss of his left talus. Despite repeated surgeries of debridement and insertion of external fixator to his injured ankle, the patient had residual problem of ankle instability, ankle infection, and absence of his involved talus. With the help of computerized 3-dimensional printing techniques, an anatomical talus cement spacer was produced in the operating room and inserted into the patient's ankle 7 weeks after the initial trauma. The external fixator was kept for another 3 weeks before removal. At 14 months after the insertion of cement spacer, the patient could walk independently without any pain for 15 minutes with the help of a crutch occasionally. However, the range of motion of his left ankle was limited to 15° in the flexion-extension arc and minimal subtalar motion. The infection of the left ankle was under control.

3D Printed Total Talar Replacement: A Promising Treatment Option for Advanced Arthritis, Avascular Osteonecrosis, and Osteomyelitis of the Ankle

Advanced ankle arthritis, avascular osteonecrosis, and osteomyelitis of the ankle remain a surgical challenge in the foot and ankle arena with limited treatment options. Multiple medical comorbidities contribute to total loss of the talus. Collapse of the talar body as a complication of total ankle arthroplasty, talectomy in infection, and septic talus necrosis or severe bone defects caused by tumor resection may result in need for total talar replacement. Ankle arthrodesis and tibiocalcaneal fusion after talectomy can produce severe disability of the ankle and foot. Total ankle replacement is a viable option for treatment of end-stage ankle arthritis in appropriate patient populations.

Development of an internally braced prosthesis for total talus replacement

Total loss of talus due to trauma or avascular necrosis, for example, still remains to be a major challenge in foot and ankle surgery with severely limited treatment options. Implantation of a custom made total talar prosthesis has shown promising results so far. Most important factors for long time success are degree of congruence of articular surfaces and ligamentous stability of the ankle. Therefore, our aim was to develop an optimized custom made prosthesis for total talus replacement providing a high level of primary stability. A custom made hemiprosthesis was developed using computed tomography and magnetic resonance imaging data of the affected and contralateral talus considering the principles and technology for the development of the S.T.A.R. prosthesis (Stryker). Additionally, four eyelets for fixation of artificial ligaments were added at the correspondent footprints of the most important ligaments. Two modifications can be provided according to the clinical requirements: A tri-articular hemiprosthesis or a bi-articular hemiprosthesis combined with the tibial component of the S.T.A.R. total ankle replacement system. A feasibility study was performed using a fresh frozen human cadaver. Maximum range of motion of the ankle was measured and ligamentous stability was evaluated by use of standard X-rays after application of varus, valgus or sagittal stress with 150 N. Correct implantation of the prosthesis was technically possible via an anterior approach to the ankle and using standard instruments. Malleolar osteotomies were not required. Maximum ankle dorsiflexion and plantarflexion were measured as 22-0-28 degrees. Maximum anterior displacement of the talus was 6 mm, maximum varus tilt 3 degrees and maximum valgus tilt 2 degrees. Application of an internally braced prosthesis for total talus replacement in humans is technically feasible and might be a reasonable procedure in carefully selected cases with no better alternatives left.

Surgical Management of Complex Lower-Extremity Trauma With a Long Hindfoot Fusion Nail: A Case Report

High-energy injuries can result in complete or partial loss of the talus. Ipsilateral fractures to the lower limb increase the complexity of surgical management, and treatment is guided by previous case reports of similar injuries. A case of complex lower-extremity trauma with extruded and missing talar body and ipsilateral type IIIB open tibia fracture is presented. Surgical limb reconstruction and salvage was performed successfully with a single orthopaedic implant in a manner not described previously in the literature. The purpose of this case report is to present the novel use of a single orthopaedic implant for treatment of a complex, open traumatic injury. Previous case reports in the literature have described the management of complete or partial talar loss. We describe the novel use of a long hindfoot fusion nail and staged bone grafting to achieve tibiocalcaneal arthrodesis for the treatment of complex lower-extremity trauma.

LEVELS OF EVIDENCE

Therapeutic, Level IV: Case study.

A systematic review of total dislocation of the talus

This review summarizes the treatment and resulting outcomes for total talar dislocation. The PubMed database was searched for articles about humans with total talar dislocation published in the English language in the last twenty years. The following data were entered into a Microsoft Excel spreadsheet: type of dislocation, nature of associated fractures (if any), type of reduction/fixation utilized, immobilization, weight-bearing status, outcome, complications and average follow-up time. Thirty-nine articles reporting a total of 86 cases of total talar dislocation are included in this review. Seventy-three of these were open injuries and 13 closed. Forty-three cases had an associated foot or ankle fracture, 32 of those cases specifically having a fracture of the talus. The talus was preserved in the initial management of 74 cases, whereas the remaining 12 cases were managed by primary talectomy. The mean duration of follow-up was 32 months. Twenty-two cases required a secondary arthrodesis or another additional procedure. A good outcome was achieved in 35% of cases, a fair outcome in 37% and a poor outcome in 27%. The complication of avascular necrosis (AVN) occurred in 22 cases and 14 subjects developed clinically significant osteoarthritis. Generally, the outcome of current treatments associated with total talar dislocation is not ideal, only 1/3 of cases achieving good outcomes. So far, preservation of the talus is the best treatment option. AVN is still a relatively common complication even in the absence of fracture or postoperative infection.

Ankle fusion with a trabecular metal spacer and an anterior fusion plate

We present a novel operative technique for ankle joint fusion in a case of severe talar bone loss. Fusion was achieved with a trabecular metal spacer combined with a single anterior, anatomically preshaped, angular, stable plate. Excellent postoperative results with good bone consolidation and preservation of lower leg length were present shown at 1 year of follow-up.

Early reimplantation for open total talar extrusion

PURPOSE

To review outcome of early reimplantation for open total talar extrusion in 7 patients.

METHODS

Medical records of 5 men and 2 women aged 19 to 53 years who underwent reimplantation for open total talar extrusion within 6 hours after road traffic accident (n= 6) or industrial injury (n=1) were reviewed. The talus was first irrigated with 9 to 10 litres of saline solution, followed by 10% povidone iodine. It was then reduced after thorough debridement and fixed with tension band wiring or external fixation. Ankle mobilisation exercises were started at week 6 and full weight bearing at week 14. Outcome was assessed using the American Foot And Ankle Society score.

RESULTS

After a mean follow-up of 31.9 (range, 24-46) months, the mean American Foot and Ankle Society score was 81, and the mean dorsiflexion-plantar flexion arc was 36.9º (range, 25º-45º). All patients were able to walk with a balanced, unaided gait with mild-to-moderate pain (n=3) or pain-free (n=4). No patient developed deep infection or instability. Three patients developed avascular necrosis of the talus; restriction of motion was moderate at the ankle joint and severe at the subtalar joint. None of these 3 patients opted for revision surgery, as the pain was tolerable and did not limit their daily activities, but their condition was expected to deteriorate with time.

CONCLUSION

Early reimplantation is recommended for open total talar extrusion, as it restores (to some extent) hind foot mechanics, heel height, and bone stock for activities of daily living and future reconstructive options.

[Tibiocalcaneal arthrodesis with retrograde nails. Description of a hindfoot procedure after massive talus destruction]

Following loss of the talus, tibiocalcaneal fusion is often the only available means of obtaining weight-bearing ability in the lower limb. Length discrepancy may be managed with an allograft. This casuistic describes 6 patients with tibiocalcaneal fusion (mean age 64 years) who had received a structural femoral head allograft fusion for failed total ankle arthroplasty (3 cases), Charcot arthropathy (2 cases) and osteomyelitis (1 case). The mean follow-up was 33 months and all limbs could be salvaged. There were two cases of non-union (one with infection). The mean AOFAS score was 51 and the mean Mazur score was 37. In the SF-36 the mean PCS was 34.4 and the mean MCS was 48.4. It was shown that in the hindfoot, as at other sites, allografts may be used for the filling of major bone defects; however, the patient function will still be massively impaired. Therefore, the procedure should be confined to cases where less complex and less invasive techniques are unlikely to be of benefit.

Completely extruded talus without soft tissue attachments

A completely extruded talus without any remaining soft tissue attachments is extremely rare. The present report describes treatment of a 45-year-old man who sustained a completely extruded talus injury following a rock-climbing fall. Upon admission, the extruded talus was deep-frozen in our bone bank. The open ankle joint underwent massive wound debridement and irrigation for 3 days. Four days later we performed a primary subtalar fusion between the extruded talus and the calcaneus, anticipating revascularization from the calcaneus. However, aseptic loosening and osteolysis developed around the screw and talus. At 12 months post-trauma we performed a tibiocalcaneal ankle fusion with a femoral head allograft to fill the talar defect. Follow-up at 24 months post-trauma showed the patient had midfoot motion, tibio-talar-calcaneal fusion, and was able partake in 4-hour physical activity twice per week.

Therapeutic management of complicated talar extrusion: literature review and case report

Total extrusion of the talus with interruption of all ligaments (missing talus) is a rare injury. We describe the case of a 27-year-old man who reported total extrusion of the talus after a motorbike accident with interruption of all talar ligaments. In the first repair effort, the articular void left by the talus was filled with antibiotic cement and the wound was closed primarily. Nevertheless, the skin overlying the talar joint displayed necrosis. In order to cover the cutaneous defect, improve local vascularization, and allow reimplantation of the talus, a sural fasciocutaneous island flap was harvested. Subsequently, the original talus was placed and arthrodesis of the subtalar joint was performed. The patient was able to walk bearing full weight without support equipment after 6 months. Several therapeutic options have been suggested in such cases, including replacing the talus, tibiocalcaneal arthrodesis, and pseudoarthrodesis. The rarity and peculiarity of such cases make the establishment of generalized guidelines an arduous task, leaving the choice of treatment to the surgeon, in conformity with each case’s peculiarity. In this case use of the flap may have promoted the vascularization of the reimplanted talus, thus avoiding avascular necrosis and allowing successful reimplantation of the original talus.

Reimplantation of a totally extruded talus: a case report

Total extrusion of the talus is an unusual injury, and the obvious risks of reimplantation of the extruded bone include infection and avascular necrosis. In this article, the authors present the case of a 34-year-old man who sustained an open ankle injury with complete extrusion of the talus. The talus was recovered at the scene of the accident, and subsequently reimplanted along with ankle stabilization with pins and an external fixator. At 6 weeks following the osseous surgery, final soft tissue reconstruction with a suralis flap was performed. At 3 years after the injury, radiographs revealed spontaneous fusion of the tibiotalar and subtalar joints, and the clinical examination and history indicated satisfactory weight-bearing function of the involved foot and ankle. The definitive treatment of this serious lower extremity injury remains controversial, and the use of large allogeneic bone grafts, vascularized bone grafts, and tibiocalcaneal fusion, as well as reimplantation of the extruded talus have been recommended.

The use of a retrograde fixed-angle intramedullary nail for tibiocalcaneal arthrodesis after severe loss of the talus

Tibiocalcaneal arthrodesis may be the only means of obtaining a painless and stable limb when there is loss of the talus. We present the early results of a prospective study on tibiocalcaneal arthrodesis using a latest-generation retrograde intramedullary nail. In the period 2006-2007, nine patients underwent tibiocalcaneal arthrodesis with retrograde intramedullary nailing. Five of these patients had infection-related loss of the talus. SF-36, AOFAS ankle-hindfoot, and Mazur Ankle Arthrodesis scores were obtained pre-fusion, and at 6 weeks, 6 months and 1 year post-fusion. The patients were also followed up clinically and radiologically. Previous surgical procedures, chronic musculoskeletal problems and other comorbidities, and complications were recorded and analyzed. All patients were available for initial follow-up and were subjectively satisfied with their outcomes. Solid fusion was achieved and fully confirmed in nine cases. One subject died 8 weeks postoperatively of a pulmonary embolism. One patient had recurrent infection. At 1 year, only one patient still needed NSAIDs regularly for pain relief. The AOFAS score improved significantly (P = 0.012) from 32.1 pre-fusion to 71.5 points at 1 year as did the Mazur score, which rose by 31.2 to 72.5 points at 1 year (P = 0.012). The SF-36 score improved significantly in the domains physical functioning, role limitations due to physical problems, bodily pain, vitality, social functioning and mental health, as did the Physical Component Summary Score. Retrograde intramedullary nailing for tibiocalcaneal arthrodesis can produce a good outcome. However, in the presence of infection, patient selection for intramedullary procedures must be carefully considered on a case-by-case basis.

Ankle arthrodesis: the simple and the complex

Ankle arthrodesis is by no means a simple surgery. It requires preoperative planning, meticulous preparation of bony surfaces, cognizance of ankle positioning, and rigidity of fixation. The procedure also requires enough experience on the part of the operating surgeon to recognize important patient factors and to determine which type of ankle arthrodesis is most appropriate for that specific patient.