Anatomic Description of the Naviculocuneiform Articulation

Image-Guided Foot and Ankle Injections

Ultrasound is a high-resolution, real-time imaging modality that is frequently used for image-guided procedures. Due to the highly complex anatomy of the foot and ankle, ultrasound should be considered a first-line imaging modality for injections and procedures in this region.

Anatomy of the Naviculocuneiform Joint Complex

Background

The purpose of this study was to quantify the articular surfaces of the naviculocuneiform (NC) joint to help clinicians better understand common pathologies observed such as navicular stress fractures and arthrodesis nonunions.

Methods

Twenty cadaver NC joints were dissected and the articular cartilage of the navicular, medial, middle, and lateral cuneiforms were quantified by calibrated digital imaging software. Statistical analysis included calculating the mean cartilage surface area dimensions of the distal navicular and proximal cuneiform bones. Length measurements on the navicular were obtained to estimate the geographic location of the interfacet ridges. Lastly, all facets of the articular surfaces were described in regard to the shape and location of cartilaginous or fibrous components. Results were compared using Student t tests.

Results

Navicular cartilage was present over 75.4% of the surface area of the proximal NC joint, compared with 72.6% of combined cuneiform cartilage distally. The mean height of the deepest (dorsal-plantar) measurement of navicular articular cartilage was 18 ± 3 mm. The mean heights of the distal medial, middle, and lateral cuneiform articular facets were 15 ± 1 mm, 17 ± 2 mm, and 15 ± 2 mm, respectively.

Conclusion

There is significant variation among the articular surfaces of the NC joint. Additionally, the central third of the navicular was calculated to lie in the inter-facet ridge between the medial and middle articular facets of the navicular.

Clinical Relevance

Surgeons may consider this study data when performing joint preparation for NC arthrodesis as cartilage was present to a mean depth of 18 mm at the NC joint. Additionally, this study demonstrates that the central third of the navicular, where most navicular stress fractures occur, lies in the interfacet ridge between the medial and middle articular facets of the navicular.

Human navicular bone: a morphometric and morphological evaluation

BACKGROUND

The composition of navicular joint complex is crucial to perform surgical interventions for multiple pathological foot aetiologies. The data on human navicular bone and its facets from Indian population remain scarce in literature.

AIMS AND OBJECTIVES

To evaluate the morphometry and morphology of navicular bone.

METHODOLOGY

A total of 77 (right: 40; left: 37) dried human navicular bones were used. The collected data were entered and analysed in SPSS software.

RESULTS

The anteroposterior diameter of navicular bone on right side was 15.19 mm (13.92, 16.77) and on left side was 15.87 mm (13.83, 17.27). The transverse diameter on right and left sides were 34.21 mm (31.74, 36.6) and 33.59 mm (30.23, 35.43), respectively. The vertical diameter measured on the right was 22.31 mm (21.19, 23.94) and on left 22.53 mm (20.8, 24.24). Morphometric evaluation showed no significant difference between right and left navicular bones. The commonest shape for posterior facet was quadrilateral, on the right (62.5%) and left (40.5%). The most common shape of anterior facet for medial cuneiform is quadrilateral, on the right (85%) and left (89.1%). For intermediate cuneiform, triangular facet was common on the right side (72.5%) and on the left (59.5%). The lateral cuneiform facet was bean shaped on right side (72.5%) and quadrilateral on the left side (32.5%). There was a significant difference in shape distribution between right and left (P < 0.05). The median length of the groove for tibialis posterior tendon was 18.01 mm and 16.19 mm on right and left side, respectively. Cuboid facet was observed in 28 (70%) and 26 (65.9%) navicular bones on right and left sides, respectively.

CONCLUSION

There is no significant difference between right and left bones with regards to morphometric parameters. Morphological evaluation revealed significant difference in the distribution of shape between right and left bones.

The Navicular Cuneiform Joint: Updates on Avoiding and Managing a Nonunion

Naviculocuneiform arthrodesis, while often used to support the medial column during management of primary/post-traumatic arthritis, deformity correction, or in the surgical treatment of progressive collapsing foot deformity, can develop nonunion. Addressing this condition hinges on the assessment of various parameters such as patient/host factors and recognition of the etiology of the nonunion. In this article, methods of optimizing this surgical intervention through anatomic and physiologic considerations are highlighted. Further, information is provided to assist foot and ankle surgeons in performing a comprehensive work-up to allow for successful reconstruction and optimal patient outcomes.

Image-Guided Foot and Ankle Injections

Ultrasound is a high-resolution, real-time imaging modality that is frequently used for image-guided procedures. Due to the highly complex anatomy of the foot and ankle, ultrasound should be considered a first-line imaging modality for injections and procedures in this region.

Biomechanical evaluation of naviculocuneiform fixation with lag screw and locking plates

BACKGROUND

There have been no biomechanical evaluations of naviculocuneiform (NC) joint fixation. This study compared biomechanically 3 different fixation constructs for NC-1-3 joint fixation.

METHODS

The present study compared the three fixation constructs lag screw with locking plate for each NC joint, two crossed lag screws for each NC joint and a separate lag screw for each NC joint with bridging locking plates. NC-1-3 fixation was performed stepwise, and rotation of each joint was evaluated after the application of each lag screw or locking plate and their removal.

RESULTS

All examined fixation techniques led to a significant reduced rotation of the NC joints. For NC-1 rotation decreased from 2.8° (Range 1.2-6.6°) to 0.6° (0.2-3.0°) for lag screw and locking plate (p = 0.002) and from 5.0° (1.7-9.8°) to 1.0° (0.1-3.6°) for crossed lag screws (p = 0.002). For NC-2, locking plate constructs were better with 0.2° (0.1-0.5°) compared to crossed lag screw osteosynthesis with 0.9° (0.2-1.6°) (p = 0.011).

CONCLUSION

Each evaluated fixation technique led to a reduced NC joint rotation. The fixation of any NC joint had no relevant effect on the adjacent NC joints. The results might support surgeons treating NC joint disorders.

Anatomic Description of the Distal and Intercuneiform Articulations: A Cadaveric Study

The medial, intermediate, and lateral cuneiforms play a pivotal role in foot biomechanics. When correcting deformities of this joint complex understanding the clinical anatomy remains imperative to provide both anatomic reduction and appropriately sized fixation. This study qualitatively and quantitatively describes the distal and intercuneiform articulations and their clinical implications. The cuneiform complex of 10 fresh-frozen cadavers was dissected, and the width of the complex was measured with digital calipers. Following further dissection, the distal articular surface shapes of each cuneiform were described, and the individual heights and widths were measured. The intercuneiform articular facets were described and the protrusion distances, between the medial and lateral cuneiforms with the intermediate cuneiform, were measured. The width of the joint complex was 44.74 ± 3.40 mm. The medial cuneiform height, width, dorsal anterior, and plantar protrusion distances were 32.58 ± 2.77 mm, 14.08 ± 2.26 mm, 8.51 ± 2.17 mm, and 6.66 ± 1.21 mm, respectively. The intermediate cuneiform height and width was 23.05 ± 1.92 mm and 9.59 ± 1.85 mm, respectively. The lateral cuneiform height, width, dorsal, and plantar anterior protrusion distances were 23.38 ± 2.67 mm, 10.98 ± 3.01 mm, and 6.76 ± 1.43 mm, and 4.19 ± 1.10 mm respectively. The anterior surface of the medial, intermediate, and lateral cuneiforms was described as reniform, triangular, and triangular, respectively. The majority of intermediate cuneiforms shared an inverted L-shaped articulation with the medial cuneiform, and a B-shaped articulation with the lateral cuneiform. The shapes and sizes of distal and intercuneiform articulations were described with shared anatomical features across cadavers. Understanding the dimensions of the respective surfaces allows for anatomically appropriate fixation size.

Pearls and pitfalls of fluoroscopic-guided foot and ankle injections: what the radiologist needs to know

OBJECTIVE

This article provides a comprehensive, joint-by-joint review of fluoroscopic-guided foot and ankle injections and emphasizes pre-procedural planning, relevant anatomy, appropriate technique, troubleshooting the difficult procedure, and the importance of communicating unexpected findings with the referring clinician. The interrogation of pain generators including variant ossicles, fractures, and post-surgical/traumatic findings is also described.

CONCLUSIONS

Even the most challenging foot and ankle injections may be successfully completed with a solid anatomical understanding and thoughtful approach.

Müller-Weiss Disease: Three- to Eight-Year Follow-Up Outcomes of Isolated Talonavicular Arthrodesis

Numerous surgical techniques for the treatment of Müller-Weiss disease (MWD) have been reported. However, no extensive clinical and radiographic studies of isolated talonavicular arthrodesis and MWD have been reported. The present retrospective cohort study examined the outcomes of isolated talonavicular arthrodesis at 3 to 8 years of follow-up in 16 MWD patients with a collapsed longitudinal arch and at least Maceira stage III. Demographic data, pre- and postoperative visual analog scale (VAS) scores for pain on walking and walking disability, foot and ankle outcome scores (FAOSs), and radiographic parameters were analyzed, with statistical significance at p < .05. A survival analysis was used to determine the median time to union. The mean ± standard deviation pre- and postoperative VAS scores for pain on walking were 7.69 ± 1.62 and 2.19 ± 1.52 and the walking disability scores were 7.06 ± 2.11 and 2.31 ± 1.92, respectively. The pre- and postoperative FAOSs were 48.07 ± 21.50 and 82.27 ± 13.86 for activities of daily living, 30.86 ± 19.70 and 76.17 ± 22.39 for quality of life, and 20.93 ± 22.89 and 51.88 ± 23.66 for sports/recreation, respectively. The median pre- and postoperative FAOSs for the symptoms subscale were 73.22 (range 42.88 to 100.00) and 87.50 (35.71 to 100.00) and for pain were 34.72 (range 8.33 to 72.22) and 88.89 (54.41 to 100.00), respectively. Significant improvements occurred from preoperatively to postoperatively for VAS scores and FAOSs (p < .05). The mean pre- and postoperative calcaneal pitch angles were 11.31° ± 4.35° and 13.81^o ± 5.60^o, significant improvement (p = .016). Improvement was also seen midfoot abduction, with a mean pre- and postoperative anteroposterior Meary's angle of 14.38° ± 10.07° and 9.38° ± 12.21°. The survival analysis showed union was achieved in all patients, with a median time to union of 2 (95% confidence interval 1.03 to 3.00) months. Our data indicate that talonavicular arthrodesis provides satisfactory functional outcomes for MWD patients with a collapsed longitudinal arch.

Naviculocuneiform and Second and Third Tarsometatarsal Articulations: Underappreciated Normal Anatomy and How It May Affect Fluoroscopy-Guided Injections

OBJECTIVE

Because the second and third tarsometatarsal (TMT) and naviculocuneiform joints normally communicate, the least arthritic or technically most straightforward joint was injected when a fluoroscopically guided therapeutic injection was ordered for one or both joints. We hypothesized that pain relief would be equivalent regardless of the joint injected and would result in less radiation and a lower steroid dose compared with patients who had both articulations injected.

MATERIALS AND METHODS

Seventy-eight patients were divided into four joint groups: naviculocuneiform requested and injected (n = 15), nonrequested naviculocuneiform or second and third TMT injected (n = 25), both injected (n = 23), and TMT requested and injected (n = 15). Variables recorded included patient age and sex, fluoroscopy time, steroid dose, pre- and postprocedural pain, osteoarthrosis (OA) grade, and confidence of intraarticular injection. Statistical analysis compared mean pain level change before and after injection, mean fluoroscopy time, and mean steroid dose between groups. The mean OA grade of the nonrequested joint was compared with that of the requested joint in patients whose injected and requested joints did not match (group 2).

RESULTS

Pre- and postinjection pain reduction (p = 0.630) and postinjection pain (p = 0.935) were not significantly different. Mean steroid dose (p < 0.001) and fluoroscopy time (p = 0.0001) were significantly increased for the both joint injection group. Within the nonrequested naviculocuneiform or second and third TMT injection group, there was a significant difference in OA grade between injected (least arthritic) and requested joints (p = 0.001).

CONCLUSION

When faced with challenging naviculocuneiform or second and third TMT joint injections, choosing the technically most straightforward joint may result in less radiation and steroid dose without compromising quality of care or pain reduction.

Naviculocuneiform Arthroscopy

Surgical interventions at the naviculocuneiform joint are not uncommon to deal with various pathologies of the joint and correction of different foot deformities. To minimize the soft tissue dissection, naviculocuneiform arthroscopy has been described. The purpose of this Technical Note is to report the details of this arthroscopic approach.