Cementless acetabular components: the gold standard for socket revision

The Heat Stability of Hepatitis B Virus: A Chronological Review From Human Volunteers and Chimpanzees to Cell Culture Model Systems

During the World War II jaundice and hepatitis in the US army were observed after vaccination with the yellow fever vaccine containing human plasma for stabilization. This led to first heat experiments with volunteers without knowledge of the causative agents. Finally, experiments of human serum with volunteers and chimpanzees led to the conclusion that the hepatitis B virus (HBV) which had been identified as the responsible agent of the contamination of the vaccine, could not be inactivated at 98°C after 1 min, whereas 2 min in two chimpanzees were enough. Meanwhile, a cell culture system became available showing that 2 min exposure time is not enough depending on the virus strain used whereas 5 min means complete inactivation of HBV. The great stability of the blood-borne HBV was also of interest in hospital hygiene due to the use of moist heat for disinfection of heat-stable medical devices in washer-disinfectants. The requirements for washer-disinfectors and the parameters describing disinfection with moist heat are defined in the EN ISO 15883. In this standard, the efficacy of this thermal disinfection is described by the A₀ value. For heat-resistant viruses a higher A₀ = 3,000 is often recommended including semi-critical instruments that undergo thermal disinfection and no final sterilization. All experiments including volunteers, chimpanzees and now cell culture were performed with greater A₀ values than 3,000. Therefore, an A₀ value of 3,000 e.g., being reached by 90°C and 5 min in washer-disinfectants, can easily elevated to 6,000 by prolongation of the exposure time to 10 min. In contrast to the different laboratory experiments with high virus titers it should be considered that in practice the necessary cleaning step upfront will help to reduce virus load and then protect the personnel in the medical area.

Acetabular Cup Revision Arthroplasty Using Morselized Impaction Allograft

The rate of acetabular cup revision arthroplasty is gradually rising along with an increased risk of osteolysis and prosthesis loosening over time and an increase in life expectancy. The goals of revision total hip arthroplasty are: i) implant stability through reconstruction of large bone defects, ii) restoration of range of motion and biomechanics of the hip joint, and iii) normalization of uneven limb lengths. In acetabular cup revision arthroplasty, stable fixation of acetabular components is difficult in the presence of severe bone loss (e.g., evidence suggests that it is challenging to achieve satisfactory results in cases of Paprosky type 3 or higher bone defects using conventional techniques). The author of this study performed acetabular revision to manage patients with large areas of defective bones by filling in with morselized impaction allografts. These allografts were irradiated frozen-stored femoral heads acquired from a tissue bank, and were applied to areas of an acetabular bone defect followed by insertion of a cementless cup. When this procedure was insufficient to obtain primary fixation, a tri-cortical or structural allograft using a femoral head was carried out. Structural stability and bone incorporation were confirmed via long-term follow-up. This study aims to review conventional surgical techniques and verify the utility of surgical procedures by analyzing the author's surgical methods and discussing case reports.

Microparticle entrapment for drug release from porous-surfaced bone implants

Metallic bone implants face interfacial concerns, such as infection and insufficient bone formation. Combination of drug-loaded microparticles with the implant surface is a promising approach to reducing the concerns. The present study reports a simple method for this purpose. Drug-loaded chitosan and alginate microparticles were separately prepared by emulsion methods. Dry microparticles were introduced into porous titanium (Ti) coatings on Ti discs, and induced to agglomerate in pores by wetting with water. Agglomerates were stably entrapped in the pores: 77-82% retained in the coating after immersion in a water bath for 7 d. Discs carrying drug-loaded microparticles showed a rapid release within 6 h and a subsequent slow release up to 1 d. After coculture with Staphylococcus epidermidis for 24 h, the discs formed inhibition zones, confirming antibacterial properties. These suggest that the microparticle entrapment-based method is a promising method for reducing some of the bone-implant interfacial concerns.

[Late complications of total hip prosthesis: apropos of 42 cases]

L'arthroplastie de la hanche est un moyen fiable dans le traitement des affections de la hanche. En lui rendant sa mobilité sa stabilité et son indolence. Cependant cette chirurgie prothétique expose au risque de la survenue des complications qui peuvent engager le pronostic fonctionnel. Nous avons réalisé une étude rétrospective sur une durée de 8 ans de janvier 2004 au janvier 2012 au service de traumatologie-orthopédie de CHU HASSAN II FEZ. Pendant cette période nous avons opéré 240 patients pour PTH. Après un recul moyen de 5 ans nous avons noté chez 42 (17,4%) patients une complication tardive. Nous noté 13 cas de descellement aseptique soit 5,4%. Cette complication a été survenue dans notre série sur une prothèse cimentée dans 8 cas et non cimentée dans 5 cas. Le traitement que nous avons adopté dans notre série a été une reprise de PTH sans greffe osseuse ni anneau de reconstruction dans 4 cas, reprise avec mise en place d'anneau de Kerboull dans 7 cas et reprise avec greffe osseuse et anneau de kerboull dans 2 cas. Nous avons trouvé 11 cas de sepsis tardive soit 4,6% des cas. Nous avons le diabète comme facteur de risque chez 3 malades. L'agent causal a été staphylococcus épdermidis dans 5 cas, colibacille dans 2 cas et association staphylococcus-BGN dans 1 cas. Les différentes modalités que nous avons utilisé pour traiter l'infection dans notre ont été un lavage simple, système d'irrigation-drainage et réimplantation simple en un seul temps ou en 2 temps avec couverture systématique par une antibiothérapie adaptée selon l'antibiogramme. Nous avons noté également 11 cas de fracture sur PTH intéressant dans tous les cas le fémur, nous avons traité ce type de fracture dans notre série par une tige fémorale prothétique longue dans 4 cas, une plaque vissée cerclée dans 3 cas et cerclage simple dans 4 cas. La consolidation a été obtenue chez 9 patients avec 2 cas de pseudarthrose. Nous avons noté 7 cas de luxation tardive de PTH. Comme facteur de risque dans notre série nous avons trouvé le sexe féminin et le surpoids. Sur le plan technique la malposition de cotyle a été constituée l'étiologie principale avec 4 cas. Nous avons traité les cas de luxation par réduction simple avec traction dans 3 cas et une reprise chirurgicale pour corriger la malposition de cotyle dans 4 cas. Nos résultats sont comparables avec ceux de la littérature. Selon les résultats de la littérature le descellement aseptique constitue la complication la plus fréquente. Pour traiter cette complication les 2 modalités la plus fréquemment utilisées dans a littérature sont la reprise avec des greffes et anneaux de reconstruction ou fixer la nouvelle cupule sur os sain de néocotyle créé par descellement. Le résultat de la littérature objective aussi la responsabilité de staphylococcus comme agent causal la plus fréquent. Il montre également l'efficacité de traitement chirurgical par réimplantation de la prothèse en un seul ou en 2 temps. L'étude de la littérature objective aussi que La prise en charge des fractures sur PTH est difficile en raison de l'âge souvent avancé et de la fragilité des patients, de l'ostéoporose, et de la menace que ces fractures font peser sur la fixation de la prothèse parfois déjà défaillante. Les complications tardives de PTH sont fréquentes et sont causes de reprises de chirurgie prothétique et rendent leur prise en charge très difficile. Elles peuvent transformer les légitimes espoirs fonctionnels en catastrophe invalidante.

Revision of failed total hip arthroplasty acetabular cups to porous tantalum components: a 5-year follow-up study

We reviewed 263 consecutive patients with failed acetabular components after total hip arthroplasty that were revised using porous tantalum acetabular components and augments when necessary. The mean follow-up was 73.6 months (range, 60-84 months). The improvement of mean Harris hip score, Western Ontario and McMaster Osteoarthritis Index, and University of California Los Angeles activity scales were statistically significant (P < .001). Subjective assessments showed that 87.3% of patients reported "improvement" and 85.9% were "very or fairly pleased" with the results. At the most recent follow-up, all acetabular components were radiographically stable and none required rerevision for loosening. The acetabular revision was considered successful in 87% of cases. From this study, we conclude that the acetabular component used was reliable in creating a durable composite without failure for a minimum of 5 years.

Bone ingrowth into porous silicon nitride

Achieving solid skeletal attachment is a requirement for the clinical success of orthopedic implants. Porous or roughened surfaces and coatings have been developed and used with mixed success to achieve attachment due to bone ingrowth. Silicon nitride is a high performance ceramic whose strength, imaging properties, and biocompatibility make it a candidate material for orthopedic implants. A porous form of silicon nitride, cancellous-structured ceramic (CSC), has been developed. CSC is a nonresorbable, partially radiolucent porous structure that can be bonded to orthopedic implants made of silicon nitride to facilitate skeletal attachment. The purpose of this study was to quantify the extent and rate of bone ingrowth into CSC in a large animal model. Cylindrical implants were placed bilaterally using staged surgeries in the medial femoral condyle of six sheep. Condyles were retrieved after 3 and 6 months in situ and prepared for examination of bone growth under SEM. Bone grew into CSC to extents and at rates similar to those reported for other titanium porous surfaces in studies involving large animals and postmortem retrievals in humans. Bone ingrowth was observed at depths of penetration greater than 3 mm in some implants after only 12 weeks in situ. Bone ingrowth into CSC is a viable method for achieving skeletal attachment.

Acetabular revision with bone graft and cementless cup

Cementless acetabular components are routinely used in revision hip surgery. Nevertheless, few investigators have assessed their retention and efficacy over the long term. This occurs mainly in cases which originate from moderate to severe bone losses (cavitary and or segmental) requiring the use of morselized and or bulk bone graft. Our objective in the present study is to report the outcome of 42 patients with 43 cementless acetabular revisions with bone graft who were operated by the same surgeon. The report is based on the clinical and radiographic evaluation of the patients alive at 167 months of follow-up.

A stemmed acetabular component in the management of severe acetabular deficiency

We evaluated the use of a stemmed acetabular component in the treatment of severe acetabular deficiency during revision and complex primary total hip arthroplasty.

There were 31 hips of which 24 were revisions (20 for aseptic loosening, four for infection) and the remainder were complex primary arthroplasties. At a mean follow-up of 10.7 years (6 to 12.8), no component had been revised for aseptic loosening; one patient had undergone a revision of the polyethylene liner for wear. There was one failure because of infection. At the latest follow-up, the cumulative survival rate for aseptic loosening, with revision being the end-point, was 100%; for radiographic loosening it was 92% and for infection and radiographic loosening it was 88%. These results justify the continued use of this stemmed component for the reconstruction of severe acetabular deficiency.