Is Bone Grafting Necessary in the Treatment of Malunited Distal Radius Fractures?

Corrective osteotomy of the distal radius with palmar locking plate osteosynthesis without bone grafting and without cortical contact

The aim of this study was to assess bone healing and secondary fracture displacement after corrective osteotomy of the distal radius without any cortical contact using palmar locking plates without bone grafting. Between 2009 and 2021, 11 palmar corrective osteotomies of extra-articular malunited distal radius fractures and palmar plate fixations without the use of bone grafts and without cortical contact, were assessed. All patients showed complete osseous restoration and significant improvement in all radiographic parameters. Except for one patient, there were no secondary dislocations or loss of reduction in the postoperative follow-up. Bone grafts may not be mandatory for bone healing and prevention of secondary fracture displacement after palmar corrective osteotomy without cortical contact and fixation with palmar locking plate.Level of evidence: IV.

Effect of uncertain clinical conditions on the early healing and stability of distal radius fractures

BACKGROUND AND OBJECTIVES

The healing outcomes of distal radius fracture (DRF) treated with the volar locking plate (VLP) depend on surgical strategies and postoperative rehabilitation. However, the accurate prediction of healing outcomes is challenging due to a range of certainties related to the clinical conditions of DRF patients, including fracture geometry, fixation configuration, and physiological loading. The purpose of this study is to investigate the influence of uncertainty and variability in fracture/fixation parameters on the mechano-biology and biomechanical stability of DRF, using a probabilistic numerical approach based on the results from a series of experimental tests performed in this study.

METHODS

Six composite radius sawboneses fitted with titanium VLP (VLP 2.0, Austofix) were loaded to failure at a rate of 2 N/s. The testing results of the elastic and plastic behaviour of the VLP were used as inputs for a probabilistic-based computational model of DRF, which simulated mechano-regulated tissue differentiation and fixation elastic capacity at the fracture site. Finally, the probability of success in early indirect healing and fracture stabilisation was predicted.

RESULTS

The titanium VLP is a strong and ductile fixation whose flexibility and elastic capacity are governed by flexion working length and bone-to-plate distance, respectively. A fixation with optimised designs and configurations is critical to mechanically stabilising the early fracture site. Importantly, the uncertainty and variability in fracture/fixation parameters could compromise early DRF healing. The physiological loading uncertainty is the most adverse factor, followed by the negative impact of uncertainty in fracture geometry.

CONCLUSIONS

The VRP 2.0 fixation made of grade II titanium is a desirable fixation that is strong enough to resist irreparable deformation during early recovery and is also ductile to deform plastically without implant failure at late rehabilitation.

Current Concepts: Corrective Osteotomy for Extra-Articular Deformity Following a Distal Radius Fracture

Fracture malunion alters wrist and distal radioulnar joint (DRUJ) biomechanics, resulting in incongruence and instability of the DRUJ. Selected patients with painful functional limitation and significant deformity of the radius, but without advanced degenerative joint disease, may benefit from corrective distal radial osteotomy. Non-union and complications arising from metalwork are the most common reasons for reoperation. Surgeons should have a good understanding of risks and complications in order to fully inform their patients and manage expectations. This article reviews the biomechanical effects of radial malunion and the current concepts for treatment. Distal radial osteotomy is suitable for symptomatic patients with angular radial deformity and shortening. Evidence supports a volar approach without bone grafts for modest corrections. Bone grafts or synthetic bone substitutes are appropriate for larger corrections. Functional improvements are reported regardless of technique. Despite a high complication rate, patient satisfaction with the corrective radial osteotomy is high.

Development of numerical model-based machine learning algorithms for different healing stages of distal radius fracture healing

BACKGROUND AND OBJECTIVES

Early therapeutic exercises are vital for the healing of distal radius fractures (DRFs) treated with the volar locking plate. However, current development of rehabilitation plans using computational simulation is normally time-consuming and requires high computational power. Thus, there is a clear need for developing machine learning (ML) based algorithms that are easy for end-users to implement in daily clinical practice. The purpose of the present study is to develop optimal ML algorithms for designing effective DRF physiotherapy programs at different stages of healing.

METHOD

First, a three-dimensional computational model for the healing of DRF was developed by integrating mechano-regulated cell differentiation, tissue formation and angiogenesis. The model is capable of predicting time-dependant healing outcomes based on different physiologically relevant loading conditions, fracture geometries, gap sizes, and healing time. After being validated using available clinical data, the developed computational model was implemented to generate a total of 3600 clinical data for training the ML models. Finally, the optimal ML algorithm for each healing stage was identified.

RESULTS

The selection of the optimal ML algorithm depends on the healing stage. The results from this study show that cubic support vector machine (SVM) has the best performance in predicting the healing outcomes at the early stage of healing, while trilayered ANN outperforms other ML algorithms in the late stage of healing. The outcomes from the developed optimal ML algorithms indicate that Smith fractures with medium gap sizes could enhance the healing of DRF by inducing larger cartilaginous callus, while Colles fractures with large gap sizes may lead to delayed healing by bringing excessive fibrous tissues.

CONCLUSIONS

ML represents a promising approach for developing efficient and effective patient-specific rehabilitation strategies. However, ML algorithms at different healing stages need to be carefully chosen before being implemented in clinical applications.

Corrective Osteotomy of Malunited Fractures of the Distal Radius Using a Combined Surgical Approach

Background: Malunited distal radius (DR) fractures following conservative treatment range from 6% to 80% of clinical observations. Surgical treatment is used to return the articular surface of the radius to original anatomical position and to restore the natural transfer of strength, wrist kinematics, and function of the entire hand. The aim of this research was to study and analyze the results of corrective osteotomy of malunited distal radius fractures using a combined approach. Methods: From 2008 to 2018, 43 patients with malunited DR fractures who underwent surgery using a combined approach were followed up. Long-term results (1 year after surgery) were studied in detail in 32 patients. Indications for surgery were determined taking into account, first, complaints of severe pain in the wrist during exertion, decreased hand strength, and limited mobility of the wrist. Results: Five patients (15.6%) reported a number of minor complications: intra-articular screw placement (2), incorrect reposition (1), transient neuropathy of the superficial branch of the radial nerve (1), and delayed fracture consolidation (1). In addition, another 5 patients reported the progression of wrist arthritis. Suppurations of the surgical wound and malunited fragments were not reported. Conclusions: During reconstructive interventions, a combined approach with palmar plating provides optimal conditions for corrective osteotomy, adequate reposition and plastic repair of the bone defect, and minimization of the number of complications.

Influence of therapeutic grip exercises induced loading rates in distal radius fracture healing with volar locking plate fixation

BACKGROUND AND OBJECTIVE

Therapeutic exercises could potentially enhance the healing of distal radius fractures (DRFs) treated with volar locking plate (VLP). However, the healing outcomes are highly dependant on the patient-specific fracture geometries (e.g., gap size) and the loading conditions at the fracture site (e.g., loading frequency) resulted from different types of therapeutic exercises. The purpose of this study is to investigate the effects of different loading frequencies induced by therapeutic exercises on the biomechanical microenvironment of the fracture site and the transport of cells and growth factors within the fracture callus, ultimately the healing outcomes. This is achieved through numerical modelling and mechanical testing.

METHODS

Five radius sawbones specimens (Pacific Research Laboratories, Vashon, USA) fixed with VLP (VRP2.0+, Austofix) were mechanically tested using dynamic test instrument (INSTRON E3000, Norwood, MA). The loading protocol used in mechanical testing involved a series of cyclic axial compression tests representing hand and finger therapeutic exercises. The relationship between the dynamic loading rate (i.e., loading frequency) and dynamic stiffness of the construct was established and used as inputs to a developed numerical model for studying the dynamic loading induced cells and growth factors in fracture site and biomechanical stimuli required for healing.

RESULTS

There is a strong positive linear relationship between the loading rate and axial stiffness of the construct fixed with VLP. The loading rates induced by the moderate frequencies (i.e., 1-2 Hz) could promote endochondral ossification, whereas relatively high loading frequencies (i.e., over 3 Hz) may hinder the healing outcomes or lead to non-union. In addition, a dynamic loading frequency of 2 Hz in combination of a fracture gap size of 3 mm could produce a better healing outcome by enhancing the transport of cells and growth factors at the fracture site in comparison to free diffusion (i.e. without loading), and thereby produces a biomechanical microenvironment which is favourable for healing.

CONCLUSION

The experimentally validated numerical model presented in this study could potentially contribute to the design of effective patient-specific therapeutic exercises for better healing outcomes. Importantly, the model results demonstrate that therapeutic grip exercises induced dynamic loading could produce a better biomechanical microenvironment for healing without compromising the mechanical stability of the overall volar locking plate fixation construct.

Retrospective study of radial dome osteotomy with volar plate fixation versus K-wires in Madelung's deformity: long-term follow-up

PURPOSE

The emerging role of the locking plate improved the technique also in corrective osteotomies in Madelung's deformity, but there is a lack of analyses between the fixation techniques, as well as little information in functional outcomes and long-term follow-up. The current study compared the outcomes, pitfalls, and advantages of volar plate and screws fixation versus K-wires fixation in a long-term follow-up.

METHODS

Twenty-eight children presenting the "distal radius" variant of Madelung's deformity underwent Vickers ligament release and distal radial dome osteotomy between 2009 and 2015. Twenty-three children (20 females and 3 males, mean age 15 years and 7 months at surgery and 24 years and 8 moths at follow-up), with 26 operatively treated wrists, were available for follow-up. A retrospective two-cohort study, evaluating clinically and radiologically results, has been conducted with a mean eight years and seven months follow-up.

RESULTS

Bone union and pain relief were obtained in all cases, as well as improvements in wrist motion and radiographic indices. A statistically significant correlation was identified between the volar plate fixation and an improved lunate subsidence on X-ray, and a trend towards an improved DASH score in the cohort with plate and screws, as well as significant improvement in wrist extension and supination always in the plate fixation cohort.

CONCLUSIONS

The long-term follow-up enabled the patients to report on more definitive outcomes in terms of functional and cosmetic improvements. Volar plate fixation is an effective technique allowing for simple post-operative management and earlier rehabilitation program with improved clinical and radiographic outcomes.

FDA-approved bone grafts and bone graft substitute devices in bone regeneration

To induce bone regeneration there is a complex cascade of growth factors. Growth factors such as recombinant BMP-2, BMP-7, and PDGF are FDA-approved therapies in bone regeneration. Although, BMP shows promising results as being an alternative to autograft, it also has its own downfalls. BMP-2 has many adverse effects such as inflammatory complications such as massive soft-tissue swelling that can compromise a patient's airway, ectopic bone formation, and tumor formation. BMP-2 may also be advantageous for patients not willing to give up smoking as it shows bone regeneration success with smokers. BMP-7 is no longer an option for bone regeneration as it has withdrawn off the market. PDGF-BB grafts in studies have shown PDGF had similar fusion rates to autologous grafts and fewer adverse effects. There is also an FDA-approved bioactive molecule for bone regeneration, a peptide P-15. P-15 was found to be effective, safe, and have similar outcomes to autograft at 2 years post-op for cervical radiculopathy due to cervical degenerative disc disease. Growth factors and bioactive molecules show some promising results in bone regeneration, although more research is needed to avoid their adverse effects and learn about the long-term effects of these therapies. There is a need of a bone regeneration method of similar quality of an autograft that is osteoconductive, osteoinductive, and osteogenic. This review covers all FDA-approved bone regeneration therapies such as the "gold standard" autografts, allografts, synthetic bone grafts, and the newer growth factors/bioactive molecules. It also covers international bone grafts not yet approved in the United States and upcoming technologies in bone grafts.

Comparison of an oblique single cut rotation osteotomy with a novel 3D computer-assisted oblique double cut alignment approach

An oblique double-cut rotation osteotomy (ODCRO) enables correcting a complex bone deformation by aligning, in 3D, the distal, middle and proximal bone segments with a target bone, without intersegmental gaps. We propose virtual preoperative planning of an ODCRO. To minimize a residual translation error, we use an optimization algorithm and optimize towards bone length, alignment in the transverse direction, or a balanced reconstruction. We compare the residual alignment error with an oblique single-cut rotation osteotomy using 15 complex bone deformations. The single-cut approach was not feasible in 5 cases, whereas the ODCRO procedure was feasible in all cases. The residual alignment error was smaller for the ODCRO than for the single-cut approach except for one case. In a subset for length reconstruction, the length error of 7.3-21.3 mm was restored to 0.0 mm in 4 of 5 cases, although at the cost of an increased transverse translation. The proposed method renders planning an ODCRO feasible and helps restoring bone alignment and lengthening better than an oblique single-cut rotation osteotomy. Awareness of the challenges and possibilities in preoperative planning of an ODCRO will be of value for future alignment surgery and for patients.

Balance Between Mechanical Stability and Mechano-Biology of Fracture Healing Under Volar Locking Plate

The application of volar locking plate (VLP) is promising in the treatment of dorsally comminuted and displaced fracture. However, the optimal balance between the mechanical stability of VLP and the mechanobiology at the fracture site is still unclear. The purpose of this study is to develop numerical models in conjunction with experimental studies to identify the favourable mechanical microenvironment for indirect healing, by optimizing VLP configuration and post-operative loadings for different fracture geometries. The simulation results show that the mechanical behaviour of VLP is mainly governed by the axial compression. In addition, the model shows that, under relatively large gap size (i.e., 3-5 mm), the increase of FWL could enhance chondrocyte differentiation while a large BPD could compromise the mechanical stability of VLP. Importantly, bending moment produced by wrist flexion/extension and torsion moment produced from forearm rotation could potentially hinder endochondral ossification at early stage of healing. The developed model could potentially assist orthopaedic surgeons in surgical pre-planning and designing post-operation physical therapy for treatment of distal radius fractures.

Bone healing of distal radius nonunion treated with bridge plating with bone graft substitutes in combination with systemic romosozumab administration: A case report

Romosozumab is a humanized, anti-sclerostin monoclonal antibody used to treat osteoporosis, which increases bone formation and decreases bone resorption. It enhances fracture healing and systemic romosozumab administration may have therapeutic potentials for accelerating bone healing of even nonunion. Herein, a 61-year-old heavy smoker male with distal radius nonunion who achieved successful bone union by combination therapy of romosozumab and spanning distraction plate fixation with bone graft substitutes was presented. Through the dorsal approach, atrophic comminuted nonunion of the distal radius was sufficiently debrided. Reduction of the distal radius was performed using indirect ligamentotaxis, and a 14-hole locking plate was fixed from the third metacarpal to the radial shaft. A beta (β) tricalcium phosphate block was mainly packed into the substantial metaphyseal bone defect with additional bone graft from the resected ulnar head. Postoperatively, systemic administration of monthly romosozumab was continued for six months. Complete bone union was achieved 20 weeks postoperatively and the plate was, then, removed. Wrist extension and flexion improved to 75o and 55o, respectively, without pain, and grip strength increased 52 weeks postoperatively from 5.5 kg to 22.4 kg. During romosozumab treatment, bone formation marker levels increased rapidly and finally returned to baseline, and bone resorption marker levels remained low. In conclusion, combination of systemic romosozumab administration and grafting β-tricalcium phosphate with bridge plating provides an effective treatment option for difficult cases of comminuted distal radius nonunion with risk factors such as smoking, diabetes, and fragility.

Modified dome osteotomy and anterior locking plate fixation for distal radius variant of Madelung deformity: a retrospective study

PURPOSE

Dome osteotomy of the distal radius with Vickers ligament release is an established method of treatment for Madelung deformity. Many different surgical procedures have been proposed in literature but techniques, patient inclusion and efficacy evaluations are heterogeneous.

MATERIALS AND METHODS

A retrospective review of children affected by 'distal radius' Madelung deformity and treated with a standardized surgical procedure (modified reverse dome osteotomy of the distal radius and volar fixation with a small locking plate) between 2010 and 2018 at a single center was performed. The technique used in this study, reversing the shape of the classical dome osteotomy, allowed for an improved three-planar correction of the distal radial epiphysis and volar plate fixation allowed for an increased stability and reduced soft tissue morbidity. A structured follow-up including a prompt post-operative rehabilitation program (without wrist immobilization) was established. Pain relief, functional outcome and cosmetic appearance were assessed with a structured clinical assessment, DASH Score and radiographic assessment, accordingly.

RESULTS

A total of 15 wrists in 13 children (12 females, mean age of 15.6 years, range 11-19) were included. The mean follow-up time was 3.8 years. Bone union and pain relief were obtained in all cases. Improvement in the range of motion was detected in extension, supination and flexion of the wrist. Radial inclination was increased by 15.3° and lunate subsidence by 4.1 mm.

CONCLUSIONS

The use of volar fixation with a small locking plate and immediate post-operative rehabilitation for reverse dome osteotomy of the distal radius in pediatric patients affected by 'distal radius' Madelung's deformity is stable and effective.

Patient-specific plate for navigation and fixation of the distal radius: a case series

Purpose

Corrective osteotomy of a malunited distal radius conventionally relies on 2D imaging techniques for alignment planning and evaluation. However, this approach results in suboptimal bone repositioning, which is associated with poor patient outcomes. In this case series, we evaluate the use of novel patient-specific plates (PSPs), which feature navigation and fixation of bone segments as preoperatively planned in 3D.

Methods

Ten participants with distal radius malunion underwent CT scans for preoperative alignment planning. Patient-specific guides and plates were designed, 3D-printed, and sterilized for use in corrective surgery of the distal radius. Pre- and postoperative results were compared in regard to clinical, functional, and radiographic outcomes.

Results

The application of a PSP was successful in 7 of the 10 cases. After treatment, the residual alignment error was reduced by approximately 50% compared with conventional treatment. The use of PSPs reduced pain significantly. Pre- and postoperative results were pooled and demonstrated significant correlations between: (1) pain and malpositioning, (2) the range of pro- and supination motion, the MHOQ score, the EQ-5D-5L score and dorsovolar angulation, and (3) MHOQ score and proximodistal translation.

Conclusion

The correlation between malalignment and MHOQ score, EQ-5D-5L score, pain, and range of motion shows that alignment should be restored as well as possible. Compared to the conventional approach, which relies on 2D imaging techniques, corrective osteotomy based on 3D preoperative planning and intraoperative fixation with a PSP has been shown to improve bone alignment and reduce pain.

Level of evidence

IV.

Functional outcome after corrective osteotomy for malunion of the distal radius: a randomised, controlled, double-blind trial

Purpose

The purpose of this randomised, controlled, double-blind trial was to evaluate functional outcome during the first year after corrective osteotomy for malunited distal radius fractures, with or without filling the osteotomy void.

Method

Patients were randomised to receive a HydroSet bone substitute or no graft. Cortical contact was maintained and stabilisation of the osteotomy was carried out with a DiPhos R- or RM Plate. To evaluate subjective functional outcome, the Patient-Rated Wrist Evaluation (PRWE), the Quick Disabilities of the Arm, Shoulder and Hand Questionnaire (Q-DASH), the Canadian Occupational Performance Measure (COPM) and the RAND-36 were used. Moreover, range of motion and grip strength were measured by blinded evaluators. Evaluations were made pre-operatively and three, six and 12 months post-operatively.

Results

There were no significant differences between the groups at any time point post-operatively with respect to any of the PROMs that were used or range of motion or grip strength (p > 0.05). In both groups, there was a significant improvement at the 12-month follow-up compared with pre-operatively for the PRWE, the Q-DASH and the COPM satisfaction scores. The RAND-36 revealed no significant differences except for two domains, in which there was an improvement in the treatment group (p < 0.05). For grip strength and for range of motion in all movement directions, except dorsal extension, there was a significant improvement in both groups (p < 0.05).

Conclusion

There is no significant difference in functional outcome during the first year after corrective open-wedge distal radius osteotomy, where cortical contact is maintained, regardless of whether or not bone substitute to fill the void is used.

Solitary ulnar shortening osteotomy for malunion of distal radius fractures: experience of a centre in the UK and review of the literature

INTRODUCTION

Isolated ulnar shortening osteotomies can be used to treat ulnocarpal abutment secondary to radial shortening following distal radius fractures. Given the increase of fragility distal radius fractures awareness of treating the sequelae of distal radius fractures is important. We present the largest reported case series in the UK of ulnar shortening osteotomies for this indication.

MATERIALS AND METHODS

Twenty patients with previous distal radial fractures were included, who presented with wrist pain and radiologically evident positive ulnar variance secondary to malunion of the distal radius with no significant intercalated instability. Patients were treated with a short oblique ulnar shortening osteotomy, using a Stanley jig and small AO compression plate system. Pre- and postoperative radiographical measurements of inclination, dorsal/volar angulation and ulnar variance were made. Patients were scored pre- and postoperatively using the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) and Patient-Rated Wrist Evaluation scores by two orthopaedic surgeons. Mean follow-up was 24 months after surgery.

RESULTS

Radiographical analysis revealed a change in the ulnar variance with an average reduction of 5.74 mm. Mean preoperative scores were 61.1 (range 25-95.5) for QuickDASH and 70.4 (range 33-92) for Patient-Rated Wrist Evaluation. At the latest follow-up, mean postoperative QuickDASH scores were 10.6 (range 0-43.2) and 17.2 (range 0-44) for Patient-Rated Wrist Evaluation. Differences in scores after surgery for both QuickDASH and Patient-Rated Wrist Evaluation were statistically significant (P < 0.01).

CONCLUSIONS

The ulnar shortening osteotomy is a relatively simple procedure compared with corrective radial osteotomy, with a lower complication profile. In our series, patients showed significant improvement in pain and function by correcting the ulnar variance thus preventing ulna-carpal impaction.

Biomechanical considerations in the design of patient-specific fixation plates for the distal radius

Use of patient-specific fixation plates is promising in corrective osteotomy of the distal radius. So far, custom plates were mostly shaped to closely fit onto the bone surface and ensure accurate positioning of bone segments, however, without considering the biomechanical needs for bone healing. In this study, we investigated how custom plates can be optimized to stimulate callus formation under daily loading conditions. We calculated implant stress distributions, axial screw forces, and interfragmentary strains via finite element analysis (FEA) and compared these parameters for a corrective distal radius osteotomy model fixated by standard and custom plates. We then evaluated these parameters in a modified custom plate design with alternative screw configuration, plate size, and thickness on 5 radii models. Compared to initial design, in the modified custom plate, the maximum stress was reduced, especially under torsional load (- 31%). Under bending load, implants with 1.9-mm thickness induced an average strain (median = 2.14%, IQR = 0.2) in the recommended range (2-10%) to promote callus formation. Optimizing the plate shape, width, and thickness in order to keep the fixation stable while guaranteeing sufficient strain to enhance callus formation can be considered as a design criteria for future, less invasive, custom distal radius plates. Graphical abstract ᅟ.

Corrective osteotomy is an effective method of treating distal radius malunions with good long-term functional results

INTRODUCTION

Malunion occurs in approximately 23% of non-operatively treated and 11% of operatively treated distal radius fractures. The decision whether to correct a malunion is primarily based on functional impairment and wrist pain. The purpose of this study was to assess the long-term functional outcomes of corrective osteotomies for symptomatic malunited distal radius fractures.

METHODS

All consecutive corrective osteotomies of the distal radius performed in one centre between January 2009 and January 2016 were included. The primary outcome was the functional outcome assessed with the Disability of the Arm, Shoulder and Hand (DASH) and the Patient-Rated Wrist Evaluation (PRWE) score. Secondary outcomes were range of motion, grip strength, pain as indicated on the Visual Analogue Scale (VAS) before and after corrective osteotomy, radiological parameters, time to union and complications. Additionally, we aimed to determine if there were any difference in graft versus no graft usage.

RESULTS

A total of 48 patients were included. The median age was 54.5 years (IQR 39-66) and 71% was female. The median time to follow-up was 27 months. The median DASH and PRWE score were respectively 10.0 (IQR 5.8-23.3) and 18.5. (6.5-37.0). Except for pronation and supination, range of motion and grip strength of the injured wrist were significantly less compared to the uninjured side. Palmar and dorsal flexion and radial and ulnar deviation of the injured wrist were significantly less compared with the uninjured side. VAS pain scores decreased significantly from 6.5 preoperative to 1.0 postoperative. The median time to union was 23 weeks (IQR 12-29.5). Eighteen patients (38%) had a complication for which additional treatment was required. Except for a significant difference in radial inclination and length after the corrective osteotomy in favour of graft usage, there were no significant differences between graft an no graft usage.

CONCLUSIONS

Corrective osteotomy is an effective method of treating symptomatic distal radius malunions with good long-term functional results, measured with the DASH and PRWE score, and improvement in radiographic parameters and pain scores. Additionally, no differences in functional outcomes were found between graft and no graft usage.