Dorsal Lunate Facet Fracture Reduction Using a Bone Reduction Forceps

Size and fixation options of dorsoulnar fragments in distal radius fractures

PURPOSE

This study aimed to investigate the influence of size and fixation options of dorsoulnar fragments on the clinical outcomes of distal radius fractures (DRFs).

METHODS

This retrospective analysis was performed on 94 patients with DFR accompanied by dorsoulnar fragments, spanning the period from October 2018 to November 2022. Mean follow-up was 15.5 (range, 12-20) months. Patients were divided into small- (<5 %, n = 28), middle- (5-15 %, n = 50), and large- (>15 %, n = 16) sized groups according to articular involvement of dorsoulnar fragments determined by three-dimensional (3D) computed tomography (CT) modeling. Subdivision also took place for the presence of postoperative fragment displacement (>2 mm) and fixation methods including volar locking plate (VLP), VLP combined with dorsal hollow compression screw (VDS), and VLP combined with dorsal low-profile mini plate (VDP). The radiographic parameters (volar tilt, radial inclination, and radial height) and functional outcome measures of wrist range of motion, wrist function (DASH, PRWE), and wrist pain (VAS) were evaluated and compared between groups.

RESULTS

Fracture healing was observed in all patients at final follow-up. No instances of dorsoulnar fragment displacement were observed in patients undergoing VDS and VDP treatment and the incidence of the dorsoulnar fragment displacement was 35 % (n = 8) in small-sized group, 21 % (n = 7) in middle-sized group, and 7 % (n = 1) in large-sized group when patients were treated with VLP. In small-sized group, no significant differences were found between patients with and without dorsoulnar fragment displacement in dorsiflexion restriction (10.6 ± 2.8°, 9.1 ± 2.3°, P = 0.159), pronosupination restriction (9.6 ± 2.1°, 8.6 ± 1.7°, P = 0.188), DASH (11.5 ± 4.1, 10.7 ± 3.2, P = 0.562), PRWE (11.9 ± 4.2, 10.6 ± 3.6, P = 0.425), and VAS (1.1 ± 1.1, 0.9 ± 1.0, P = 0.528). In middle-sized combined with large-sized group, the functional outcome measures of dorsiflexion restriction (12.5 ± 3.7°, 9.8 ± 2.9°, P = 0.022), DASH (14.6 ± 5.2, 11.4 ± 3.7, P = 0.030), and PRWE (15.0 ± 4.5, 11.3 ± 3.9, P = 0.016) were superior in patients without dorsoulnar fragment displacement. In patients treated with VLPs, no significant differences were found in dorsiflexion restriction (9.8 ± 2.5°, 10.8 ± 3.5°, 9.4 ± 2.5°, P = 0.299), pronosupination restriction (9.2 ± 1.9°, 10.1 ± 2.8°, 8.9 ± 1.5°, P = 0.200), DASH (11.1 ± 3.5, 12.9 ± 4.3, 11.1 ± 3.6, P = 0.162), PRWE (11.1 ± 3.9, 12.8 ± 4.2, 10.8 ± 3.9, P = 0.188), and VAS (1.0 ± 1.0, 1.4 ± 1.1, 0.9 ± 0.9, P = 0.151) between small-sized, middle-sized, and large-sized groups. In middle-sized group, no significant differences were found in dorsiflexion restriction (10.8 ± 3.5°, 9.4 ± 2.2°, 9.4 ± 2.4°, P = 0.316); pronosupination restriction (10.1 ± 2.8°, 8.8 ± 1.9°, 9.0 ± 2.5°, P = 0.314), DASH (12.9 ± 4.3, 10.3 ± 3.7, 10.5 ± 3.7, P = 0.133), PRWE (12.8 ± 4.2, 10.4 ± 3.8, 10.6 ± 4.1, P = 0.199), and VAS (1.4 ± 1.1, 0.8 ± 0.7, 1.0 ± 1.1, P = 0.201) between subgroups of VLP, VDS, and VDP. No significant differences were found in radiographic parameters between all groups compared.

CONCLUSION

This study indicated that the strict reduction and fixation of a dorsoulnar fragment might be not essential when its articular involvement was less than 5 %. The volar locking plate (VLP) fixation was commonly effective in treating distal radius fractures accompanied by a dorsoulnar fragment involving over 15 % of the articular surface. Additionally, the use of an additional dorsal hollow compression screw or a dorsal low-profile mini plate can get good wrist function in the early-term follow-up when the dorsoulnar fragment involve 5-15 % of the articular surface.

Management of complex wrist fractures with volar and dorsal locked (double-locked) K-lock

This article is a technical note to outline a novel technique of fixation in complex, comminuted distal radius fractures using a double-locked K-wire construct using a new implant called K-lock. In these (AO) C-type fractures, with significant dorsal comminution, it is often difficult to attain stable and secure fixation of the dorsal rim fragments, especially the dorsal lunate fossa fragment. This often results in patients being treated by temporary spanning devices or asking to have a restricted use of the hand during a given period to avoid loss of position. If dorsal plating is necessary, because of the severity of the comminution, a double-locked K-wire (locked in both the dorsal and volar plates) offers a fixation option and may create a significantly stronger construct and allow confident early mobilization. The K-lock was recently launched by Newclip Technics as an adjunct to the Xpert Wrist 2.4 set as a fragment-specific fixation option. The wire has less chance of displacing or fracturing the fragment and has a smooth surface compared with a screw; this wire would be safer close to the joint in severe distal intra-articular comminution. Of the 9 cases performed so far (as is our usual practice), despite the complexity of the fractures, none were immobilized postoperatively and all started hand therapy in the first week. Most were driving by 2 weeks and returned to light work at 4 weeks and heavy work or sports at 6 to 8 weeks. This principle of fixation may also be extended to other fractures where dual plating is used.

Evidence-Based Surgery: What Can Intra-Operative Images Contribute?

Evidence-based medicine integrates results from randomized controlled trials (RCTs) and meta-analyses, combining the best external evidence with individual clinical expertise and patients' preferences. However, RCTs of surgery differ from those of medicine in that surgical performance is often assumed to be consistent. Yet, evaluating whether each surgery is performed to the same standard is quite challenging. As a primary issue, the novelty of this review is to emphasize-with a focus on orthopedic trauma-the advantage of having complete intra-operative image documentation, allowing the direct evaluation of the quality of the intra-operative technical performance. The absence of complete intra-operative image documentation leads to the inhomogeneity of case series, yielding inconsistent results due to the impossibility of a secondary analysis. Thus, comparisons and the reproduction of studies are difficult. Access to complete intra-operative image data in surgical RCTs allows not only secondary analysis but also comparisons with similar cases. Such complete data can be included in electronic papers. Offering these data to peers-in an accessible link-when presenting papers facilitates the selection process and improves publications for readers. Additionally, having access to the full set of image data for all presented cases serves as a rich resource for learning. It enables the reader to sift through the information and pinpoint the details that are most relevant to their individual needs, allowing them to potentially incorporate this knowledge into daily practice. A broad use of the concept of complete intra-operative image documentation is pivotal for bridging the gap between clinical research findings and real-world applications. Enhancing the quality of surgical RCTs would facilitate the equalization of evidence acquisition in both internal medicine and surgery. Joint effort by surgeons, scientific societies, publishers, and healthcare authorities is needed to support the ideas, implement economic requirements, and overcome the mental obstacles to its realization.

Volar versus combined dorsal and volar plate fixation of complex intraarticular distal radius fractures with small dorsoulnar fragment - a biomechanical study

Complex intraarticular distal radius fractures (DRFs), commonly managed with volar locking plates, are challenging. Combined volar and dorsal plating is frequently applied for treatment, however, biomechanical investigations are scant. The aim of this biomechanical study was to investigate volar plating versus double plating in DRFs with different degrees of lunate facet comminution.Thirty artificial radii with simulated AO/OTA 23-C2.1 and C3.1 DRFs, including dorsal defect and lunate facet comminution, were assigned to 3 groups: Group 1 with two equally-sized lunate facet fragments; Group 2 with small dorsal and large volar fragment; Group 3 with three equally-sized fragments. The specimens underwent volar and double locked plating and non-destructive ramped loading in 0° neutral position, 40° flexion and 40° extension.In each tested position, stiffness: (1) did not significantly differ among groups with same fixation method (p ≥ 0.15); (2) increased significantly after supplemental dorsal plating in Group 2 and Group 3 (p ≤ 0.02).Interfragmentary displacements between styloid process and lunate facet in neutral position were below 0.5 mm, being not significantly different among groups and plating techniques (p ≥ 0.63).Following volar plating, angular displacement of the lunate facet to radius shaft was significantly lower in Group 1 versus both Group 2 and Group 3 (p < 0.01). It decreased significantly after supplemental dorsal plating in Group 2 and Group 3 (p < 0.01), but not in Group 1 (p ≥ 0.13), and did not differ significantly among the three groups after double plating (p ≥ 0.74).Comminution of the lunate facet within its dorsal third significantly affected the biomechanical outcomes related to complex intraarticular DRFs treated with volar and double locked plates.Double plating demonstrates superior stability versus volar plating only for lunate facet comminution within its dorsal third. In contrast, volar plating could achieve stability comparable with double plating when the dorsal third of the lunate facet is not separated by the fracture pattern. Both fixation methods indicated achievable absolute stability between the articular fragments.

Distal Radioulnar Joint Instability: Diagnosis and Treatment

Distal radioulnar joint (DRUJ) instability and triangular fibrocartilage complex (TFCC) tears are more usual than estimated and are frequently overlooked. Diagnosis is often clinical, which can be confirmed using computed tomography (CT) scan and magnetic resonance imaging (MRI). In doubtful cases, bilateral computed tomography in neutral forearm rotation, supination, and pronation should also be performed. Wrist arthroscopy can be diagnostic and therapeutic for ulnar-sided wrist pain. Two systematic reviews showed equivalent outcomes between open and arthroscopic repair of the TFCC. There is scant proof to advise one technique over the other in clinical practice. TFCC repair and reconstruction are contraindicated when there is a bony deformation of the radius or ulna or osteoarthritis of the DRUJ. With the advancement of implant arthroplasty, salvage procedures are less desirable. Constrained distal radioulnar arthroplasty is stable, and the longevity is encouraging.