Arthroscopic-Guided Balloon Tibioplasty in Schatzker III Tibial Plateau Fracture

Outcomes following balloon tibioplasty versus conventional osteosynthesis techniques for Schatzker type III tibial plateau fractures: a systematic review

Introduction

Schatzker type III fractures of the tibial plateau require elevation of the depressed portions to regain articular congruity. Balloon tibioplasty has been used as an alternative to conventional metal instruments for elevation of the lateral tibial plateau. This study compared functional outcomes following balloon tibioplasty or conventional osteosynthesis techniques in patients with type III fractures of the tibial plateau.

Materials and methods

A systematic literature search was performed using PubMed, EMBASE, and Cochrane Library to identify studies published through March 29, 2021, pertaining to balloon tibioplasty or conventional osteosynthesis techniques for type III fractures. Non-human studies, opinion or editorial pieces, systematic reviews, case series (< 5 patients), and articles published in a non-English language were excluded. Primary outcomes were Rasmussen clinical score, range of motion, and Knee Society Score (KSS). A Joanna Briggs Institute (JBI) risk of bias assessment was performed for all studies.

Results

A total of 95 studies were identified, with 10 studies (and 132 total patients) meeting inclusion criteria: 1 study focused on balloon tibioplasty, 8 studies reported outcomes following conventional osteosynthesis, and 1 study compared outcomes of the two techniques. Mean follow-up times varied widely, from 4 to 76.3 months. Where reported, balloon tibioplasty resulted in good to excellent functional outcomes as indicated by Rasmussen clinical scores (mean 28.3 in a case series; mean 28.9 in a randomized controlled trial) and range of motion (≥ 140° in both studies) 1–2 years following surgery. KSS was not reported consistently enough for comparison. Studies ranged from low to high risk of bias according to the JBI assessment.

Conclusions

Balloon tibioplasty can lead to excellent functional outcomes in patients with depression fractures of the lateral tibial plateau. More research is needed to directly compare outcomes following treatment with balloon tibioplasty or conventional osteosynthesis techniques.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13018-022-02973-1.

3D surface reconstruction of the femur and tibia from parallel 2D contours

Background

Segmented structures, such as bones, are typically stored as 2D contours contained on evenly spaced images (slices). Contour interpolation algorithms to turn 2D contours into a 3D surface may differ in their results, causing discrepancies in analysis. This study aimed to create an accurate and consistent algorithm for the interpolation of femur and tibial contours that can be used in computer-assisted surgical navigation systems.

Methods

The implemented algorithm performs contour interpolation in a step-by-step manner, determining an optimal surface between each pair of consecutive contours. Determining such a surface is reduced to the problem of finding certain minimum-cost cycles in a directed toroidal graph. The algorithm assumes that the contours are ordered. The first step in the algorithm is the determination of branching patterns, followed by the removal of keyholes from contours, optimization of a target function based on the surface area, and mesh triangulation based on the optimization results and mesh seal.

Results

The algorithm was tested on contours segmented on computed tomography images from femoral and tibial specimens; it was able to generate qualitatively good 3D meshes from the set of 2D contours for all the tested examples.

Conclusion

The contour interpolation algorithm proved to be quite effective using optimization based on minimizing the area of the triangles that form the 3D surface. The algorithm can be used for the 3D reconstruction of other types of 2D cuts, but special attention must be paid with the branches, since the proposed algorithm is not designed for complex branching structures.

Contribution of Minimally Invasive Bone Augmentation With PMMA Cement in Primary Fixation of Schatzker Type II Tibial Plateau Fractures

Background: The most common type of fracture of the lateral tibial plateau is the Schatzker type II split-depressed fracture. Minimally invasive surgery using balloon reduction appears to be very promising compared to the gold standard using a bone tamp. This surgery aims to have the best reduction and stabilization to benefit from an early passive and active rehabilitation to avoid stiffening and muscle wasting. Using a balloon for fracture reduction has allowed the use of semi-liquid Injectable Bone Cement (IBC) fillers. These fillers can be phosphocalcic or polymethyl methacrylate (PMMA). The latest recommendations on these IBCs in spinal surgery increasingly rule out phosphocalcic fillers because of their low mechanical strength.

Questions/purposes: 1) What is the mechanical influence of IBC filling (PMMA) regarding the split and depression components of a Schatzker type II fracture? 2) What is the mechanical influence of osteosynthesis regarding the split and depression components of a Schatzker type II fracture with or without PMMA filing in three different kinds of percutaneous fixations?

Methods: This biomechanical study was performed on 36 fresh frozen tibia/fibula specimens. Six groups were formed according to the type of percutaneous osteosynthesis or possible PMMA filling. Mechanical strength tests were carried out using a Unicompartmental Knee prosthesis and displacement components were measured on either side of the separation on the anterolateral facet by optical method.

Results: We found a significant difference between cementless and cemented osteosynthesis for depression fracture stabilization (difference −507.56N with 95% confidence interval [−904.17; −110.94] (p-value = 0.026)). The differences between the different types of osteosynthesis were not significant (p-value = 0.58). There was a significant difference between osteosynthesis without cement and osteosynthesis with cement on separation (difference −477.72N [−878.52; −76.93] (p-value = 0.03)). The differences between the different types of fixations were not significant regarding separation (p-value = 0.99).

Conclusion: PMMA cement significantly improves primary stability, regardless of the type of osteosynthesis for a Schatzker type II plateau fracture. Filling with PMMA cement during tuberoplasty seems to be a very promising strategy in association with percutaneous osteosynthesis to allow rapid recovery after surgery.

Unilateral locking plate versus unilateral locking plate combined with compression bolt for Schatzker I-IV tibial plateau fractures: a comparative study

BACKGROUND

The quality and durability of fracture reduction play an important role in the functional prognosis of articulation. The purpose of this study was to investigate the radiological and clinical effects of compression bolts in the treatment of Schatzker I-IV tibial plateau fractures (TPFs).

METHODS

Between May 2015 and April 2018, a total of 96 consecutive adult patients with operatively treated Schatzker I-IV TPFs were included and divided into two groups according to the internal fixations: Group 1 (unilateral locking plate) and Group 2 (unilateral locking plate combined with compression bolt). Data on demographic and fracture characteristics, postoperative follow-up imaging, intraoperative indicators, postoperative reduction quality and durability, clinical outcomes, and complications were retrospectively collected and compared between the two groups.

RESULTS

There were no significant intergroup differences in preoperative baseline data, duration of operation, intra-operative blood loss, days in hospital, rate of immediate post-operative reduction loss, or complications. The time of fracture healing, the rate of secondary reduction loss, and the mean WOMAC score were significantly reduced compared with those in Group 1 (P = 0.024, 0.015, and 0.024, respectively). There were significant intergroup differences in the mean HSS score (89.0 ± 11.4 vs. 94.4 ± 6.7, P = 0.042), the mean Lysholm score (83.8 ± 9.6 vs. 88.4 ± 5.2, P = 0.027), and the mean SF-36 score (82.8 ± 12.5 vs. 90.5 ± 7.6, P = 0.001). Additionally, there were similar significant differences in subgroup analysis (only included patients with Schatzker II-III), except for WOMAC score.

CONCLUSION

Compared with unilateral locking plate fixation, unilateral locking plate combined with compressing bolt fixation can reduce the rate of secondary reduction loss, accelerate fracture healing, and show better clinical outcomes for patients with Schatzker I-IV TPFs.

Balloon tibioplasty for tibial plateau fractures

BACKGROUND

Tibial plateau fractures are complex intra-articular injuries. The aim of treatment is to restore joint congruity and alignment. Balloon tibioplasty is a novel, minimally invasive technique to reduce the fracture and restore the continuity of the articular surface. A systematic review was performed according to the PRISMA guidelines in order to assess the outcomes from this procedure.

SOURCES OF DATA

The online databases of Pubmed, Google scholar, the Cochrane Library, EMBASE and CINAHL were searched. Articles of interest were retrieved and evaluated, including case series, randomised controlled trials and cadaver studies.

AREAS OF AGREEMENT

Eight studies (one randomised controlled trial, four case series and three cadaver studies) were included in the final review. The studies demonstrated adequate fracture reduction with favourable clinical and imaging outcomes from balloon tibioplasty. Very few complications were described.

AREAS OF CONTROVERSY

There is a small volume of literature currently available on balloon tibioplasty with an overall low level of evidence. The overall number of reported cases is also small.

GROWING POINTS

Further research is necessary, with adequately powered randomised controlled trials. Further areas of research include type of bone substitute and the use of arthroscopically assisted surgery.