Electronic and chemical properties of mixed-metal oxides: Adsorption and reaction of NO on SrTiO3(100)

Catalytic Reaction Mechanism of NO-CO on the ZrO2 (110) and (111) Surfaces

Due to the large population of vehicles, significant amounts of carbon monoxide (CO), nitrogen oxides (NO_x), and unburned hydrocarbons (HC) are emitted into the atmosphere, causing serious pollution to the environment. The use of catalysis prevents the exhaust from entering the atmosphere. To better understand the catalytic mechanism, it is necessary to establish a detailed chemical reaction mechanism. In this study, the adsorption behaviors of CO and NO, the reaction of NO reduction with CO on the ZrO₂ (110) and (111) surfaces was performed through periodic density functional theory (DFT) calculations. The detailed mechanism for CO₂ and N₂ formation mainly involved two intermediates N₂O complexes and NCO species. Moreover, the existence of oxygen vacancies was crucial for NO reduction reactions. From the calculated energy, it was found that the pathway involving NCO intermediate interaction occurring on the ZrO₂ (110) surface was most favorable. Gas phase N₂O formation and dissociation were also considered in this study. The results indicated the role of reaction intermediates NCO and N₂O in catalytic reactions, which could solve the key scientific problems and disputes existing in the current experiments.

Hybrid hollow spheres of carbon@CoxNi1-xMoO4 as advanced electrodes for high-performance asymmetric supercapacitors

Combining pseudocapacitive materials with conductive substrates is an effective approach to enhance the overall performance of electrodes for supercapacitors. Herein, NiMoO4 nanosheets were grown on the surface of porous carbon nanospheres (PCNS) that were derived from cyclodextrin, resulting in PCNS@NiMoO4 hollow nanospheres. Co was further doped into NiMoO4 which gave rise to a composite PCNS@CoxNi1-xMoO4. The capacitive performance of these materials was systematically examined. Compared with pure NiMoO4 and PCNS@NiMoO4, PCNS@Co0.21Ni0.79MoO4 showed the highest specific capacitance of 954 F g-1 at 1 A g-1 and an extraordinary rate performance of 92.8% retention at 40 A g-1, which are significantly higher than those of PCNS@NiMoO4 and pure NiMoO4. This enhancement was due to the fact that PCNS provides high electrical conductivity, the hollow structure enables excellent contact and facile penetration of the electrolyte into the active material, and Co doping further improves the electrical conductivity and provides extra redox reaction sites. By using PCNS@Co0.21Ni0.79MoO4 as the positive electrode and activated carbon (AC) as the negative electrode, an asymmetric supercapacitor was fabricated. Such a device delivered an energy density of 36.7 W h kg-1 at a power density of 346.4 W kg-1, and an outstanding cycling stability with 90.2% retention of its initial capacitance after 5000 cycles of charge and discharge.

Controlling Reaction Selectivity through the Surface Termination of Perovskite Catalysts

Although perovskites have been widely used in catalysis, tuning of their surface termination to control reaction selectivity has not been well established. In this study, we employed multiple surface-sensitive techniques to characterize the surface termination (one aspect of surface reconstruction) of SrTiO₃ (STO) after thermal pretreatment (Sr enrichment) and chemical etching (Ti enrichment). We show, by using the conversion of 2-propanol as a probe reaction, that the surface termination of STO can be controlled to greatly tune catalytic acid/base properties and consequently the reaction selectivity over a wide range, which is not possible with single-metal oxides, either SrO or TiO₂ . Density functional theory (DFT) calculations explain well the selectivity tuning and reaction mechanism on STO with different surface termination. Similar catalytic tunability was also observed on BaZrO₃ , thus highlighting the generality of the findings of this study.

Energetics of CO oxidation on lanthanide-free perovskite systems: the case of Co-doped SrTiO3

The energetics of the catalytic oxidation of CO on a complex metal oxide are investigated for the first time via density functional theory calculations.

Unusual Physical and Chemical Properties of Cu in Ce1-xCuxO2 Oxides

The structural and electronic properties of Ce(1-x)Cu(x)O(2) nano systems prepared by a reverse microemulsion method were characterized with synchrotron-based X-ray diffraction, X-ray absorption spectroscopy, Raman spectroscopy, and density functional calculations. The Cu atoms embedded in ceria had an oxidation state higher than those of the cations in Cu(2)O or CuO. The lattice of the Ce(1)(-x)Cu(x)O(2) systems still adopted a fluorite-type structure, but it was highly distorted with multiple cation-oxygen distances with respect to the single cation-oxygen bond distance seen in pure ceria. The doping of CeO(2) with copper introduced a large strain into the oxide lattice and favored the formation of O vacancies, leading to a Ce(1-x)Cu(x)O(2-y) stoichiometry for our materials. Cu approached the planar geometry characteristic of Cu(II) oxides, but with a strongly perturbed local order. The chemical activities of the Ce(1-x)Cu(x)O(2) nanoparticles were tested using the reactions with H(2) and O(2) as probes. During the reduction in hydrogen, an induction time was observed and became shorter after raising the reaction temperature. The fraction of copper that could be reduced in the Ce(1-x)Cu(x)O(2) oxides also depended strongly on the reaction temperature. A comparison with data for the reduction of pure copper oxides indicated that the copper embedded in ceria was much more difficult to reduce. The reduction of the Ce(1-x)Cu(x)O(2) nanoparticles was rather reversible, without the generation of a significant amount of CuO or Cu(2)O phases during reoxidation. This reversible process demonstrates the unusual structural and chemical properties of the Cu-doped ceria materials.

Adsorption and Reaction of CO and CO2 on Oxidized and Reduced SrTiO3(100) Surfaces

The adsorption and reaction of CO and CO(2) on oxidized and reduced SrTiO(3)(100) surfaces have been studied with temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). XPS results indicate that the oxidized SrTiO(3)(100) surfaces are nearly defect-free with predominantly Ti(4+) ions whereas the sputter-reduced surfaces contain substantial amounts of defects. Both CO and CO(2) are found to adsorb weakly on the oxidized SrTiO(3)(100) surfaces. On sputter-reduced surfaces, enhanced reactivity of CO and CO(2) is observed due to the presence of oxygen vacancy sites, which are responsible for dissociative adsorption of these molecules. Our studies indicate that the CO and CO(2) molecules exhibit relatively weaker interactions with SrTiO(3)(100) compared to those with TiO(2)(110) and TiO(2)(100) surfaces. This is most likely an influence of the Sr cations on the electronic structure of the Ti cations in the mixed oxide of SrTiO(3).

Structure and property correlation for Ag deposition on α-Al2O3—a first principle study

The nature of bonding at the interface between deposited silver and (001) surface of alpha-Al2O3 for both Al-terminated and OH-terminated has been investigated using a periodic ab initio method. Substantial inter-planar relaxations within the alumina were found at both the interfaces and the bulk. The periodic calculation with Ag deposition shows that 10% of Ag loading on alumina results maximum stability. Now, this is known that, the clean alumina surface only exists at UHV condition and normally the alumina surface prefers to stay hydroxylated. We have therefore compared the silver bonding over hydroxylated alumina surface and confirmed the fact that the hydroxylated surface binds silver weakly in comparison to the clean surface and it recommends that the silver cluster over the hydroxylated surface begins to join in to form three-dimensional nuclei. The deposited Ag forms a cluster on top of the alumina surface. The Ag atomic packing was monitored to rationalize the role of packing on activity of silver. Three low-index Ag surfaces (100), (110) and (111) are investigated via the ab initio density functional calculations with ultrasoft potentials. We have monitored the relation between Ag atomic packing and its electronic properties. The results show that the structural and electronic property of Ag deposited on alumina surface depends significantly on atomic packing. Ag110 over clean alumina surface shows highest surface energy and smallest work function, whereas for the OH-terminated surface it is the Ag111. The results are discussed in view of the existing experimental data and models of metal-oxide interface.

Adsorption and Reaction of Methanol on Stoichiometric and Defective SrTiO3(100) Surfaces

The adsorption and reaction of methanol (CH(3)OH) on stoichiometric (TiO(2)-terminated) and reduced SrTiO(3)(100) surfaces have been investigated using temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and first-principles density-functional calculations. Methanol adsorbs mostly nondissociatively on the stoichiometric SrTiO(3)(100) surface that contains predominately Ti(4+) cations. Desorption of a monolayer methanol from the stoichiometric surface is observed at approximately 250 K, whereas desorption of a multilayer methanol is found to occur at approximately 140 K. Theoretical calculations predict weak adsorption of methanol on TiO(2)-terminated SrTiO(3)(100) surfaces, in agreement with the experimental results. However, the reduced SrTiO(3)(100) surface containing Ti(3+) cations exhibits higher reactivity toward adsorbed methanol, and H(2), CH(4), and CO are the major decomposition products. The surface defects on the reduced SrTiO(3)(100) surface are partially reoxidized upon saturation exposure of CH(3)OH onto this surface at 300 K.

Atomic and electronic structure of unreduced and reduced CeO2 surfaces: A first-principles study

The atomic and electronic structure of (111), (110), and (100) surfaces of ceria (CeO2) were studied using density-functional theory within the generalized gradient approximation. Both stoichiometric surfaces and surfaces with oxygen vacancies (unreduced and reduced surfaces, respectively) have been examined. It is found that the (111) surface is the most stable among the considered surfaces, followed by (110) and (100) surfaces, in agreement with experimental observations and previous theoretical results. Different features of relaxation are found for the three surfaces. While the (111) surface undergoes very small relaxation, considerably larger relaxations are found for the (110) and (100) surfaces. The formation of an oxygen vacancy is closely related to the surface structure and occurs more easily for the (110) surface than for (111). The preferred vacancy location is in the surface layer for CeO2(110) and in the subsurface layer (the second O-atomic layer) for CeO2(111). For both surfaces, the O vacancy forms more readily than in the bulk. An interesting oscillatory behavior is found for the vacancy formation energy in the upper three layers of CeO2(111). Analysis of the reduced surfaces suggests that the additional charge resulting from the formation of the oxygen vacancies is localized in the first three layers of the surface. Furthermore, they are not only trapped in the 4f states of cerium.