Leading-order relativistic effects on nuclear magnetic resonance shielding tensors

NMR chemical shift of confined 129Xe: coordination number, paramagnetic channels and molecular dynamics in a cryptophane-A biosensor

Advances in hyperpolarisation and indirect detection have enabled the development of xenon nuclear magnetic resonance (NMR) biosensors (XBSs) for molecule-selective sensing in down to picomolar concentration. Cryptophanes (Crs) are popular cages for hosting the Xe "spy". Understanding the microscopic host-guest chemistry has remained a challenge in the XBS field. While early NMR computations of XBSs did not consider the important effects of host dynamics and explicit solvent, here we model the motionally averaged, relativistic NMR chemical shift (CS) of free Xe, Xe in a prototypic CrA cage and Xe in a water-soluble CrA derivative, each in an explicit H2O solvent, over system configurations generated at three different levels of molecular dynamics (MD) simulations. We confirm the "contact-type" character of the Xe CS, arising from the increased availability of paramagnetic channels, magnetic couplings between occupied and virtual orbitals through the short-ranged orbital hyperfine operator, when neighbouring atoms are in contact with Xe. Remarkably, the Xe CS in the present, highly dynamic and conformationally flexible situations is found to depend linearly on the coordination number of the Xe atom. We interpret the high- and low-CS situations in terms of the magnetic absorption spectrum and choose our preference among the used MD methods based on comparison with the experimental CS. We check the role of spin-orbit coupling by comparing with fully relativistic CS calculations. The study outlines the computational workflow required to realistically model the CS of Xe confined in dynamic cavity structures under experimental conditions, and contributes to microscopic understanding of XBSs.

On the Utmost Importance of the Basis Set Choice for the Calculations of the Relativistic Corrections to NMR Shielding Constants

The investigation of the sensitivity of the relativistic corrections to the NMR shielding constants (σ) to the configuration of angular spaces of the basis sets used on the atoms of interest was carried out within the four-component density functional theory (DFT). Both types of relativistic effects were considered, namely the so-called heavy atom on light atom and heavy atom on heavy atom effects, though the main attention was paid to the former. As a main result, it was found that the dependence of the relativistic corrections to σ of light nuclei (exemplified here by 1H and 13C) located in close vicinity to a heavy atom (exemplified here by In, Sn, Sb, Te, and I) on the basis set used on the light spectator atom was very much in common with that of the Fermi-contact contribution to the corresponding nonrelativistic spin-spin coupling constant (J). In general, it has been shown that the nonrelativistic J-oriented and σ-oriented basis sets, artificially saturated in the tight s-region, provided much better accuracy than the standard nonrelativistic σ-oriented basis sets when calculating the relativistic corrections to the NMR shielding constants of light nuclei at the relativistic four-component level of the DFT theory.

The LRESC-Loc Model to Analyze Magnetic Shieldings with Localized Molecular Orbitals

The leading electronic mechanisms of relativistic effects in the NMR magnetic shieldings of heavy-atom (HA) containing molecules are well described by the linear response with elimination of small components model (LRESC). We show here first results from a new version of the LRESC model written in terms of localized molecular orbitals (LMOs) which is coined as LRESC-Loc. Those LMOs resemble "chemist's orbitals", representing lone-pairs, atomic cores, and bonds. The whole set of relativistic effects are expressed in terms of non-ligand-dependent and ligand-dependent contributions. We show the electronic origin of trends and behavior of different mechanisms in molecular systems which contain heavy elements that belong to any of the IB to VIIA groups of the periodic table. The SO mechanism has a well-defined dependence with the LPs (LPσ and LPπ) when the HAs have them, but the non-SO mechanisms mostly depend on other LMOs. In addition we propose here that the SO mechanism can be used to characterize interactions involving LPs and the non-SO mechanisms to characterize covalent and close-shell interactions. All our main results are in accord with previous findings, though we are now able to analyze them in a different manner.

Computational 199 Hg NMR

Theoretical background and fundamental results dealing with the computation of mercury chemical shifts and spin-spin coupling constants are reviewed with a special emphasis on their stereochemical behavior and applications.

Quantum Chemical Approaches to the Calculation of NMR Parameters: From Fundamentals to Recent Advances

Quantum chemical methods for the calculation of indirect NMR spin–spin coupling constants and chemical shifts are always in progress. They never stay the same due to permanently developing computational facilities, which open new perspectives and create new challenges every now and then. This review starts from the fundamentals of the nonrelativistic and relativistic theory of nuclear magnetic resonance parameters, and gradually moves towards the discussion of the most popular common and newly developed methodologies for quantum chemical modeling of NMR spectra.

Quantum chemical calculations of 77 Se and 125 Te nuclear magnetic resonance spectral parameters and their structural applications

An accurate quantum chemical (QC) modeling of ⁷⁷ Se and ¹²⁵ Te nuclear magnetic resonance (NMR) spectra is deeply involved in the NMR structural assignment for selenium and tellurium compounds that are of utmost importance both in organic and inorganic chemistry nowadays due to their huge application potential in many fields, like biology, medicine, and metallurgy. The main interest of this review is focused on the progress in QC computations of ⁷⁷ Se and ¹²⁵ Te NMR chemical shifts and indirect spin-spin coupling constants involving these nuclei. Different computational methodologies that have been used to simulate the NMR spectra of selenium and tellurium compounds since the middle of the 1990s are discussed with a strong emphasis on their accuracy. A special accent is placed on the calculations resorting to the relativistic methodologies, because taking into account the relativistic effects appreciably influences the precision of NMR calculations of selenium and, especially, tellurium compounds. Stereochemical applications of quantum chemical calculations of ⁷⁷ Se and ¹²⁵ Te NMR parameters are discussed so as to exemplify the importance of integrated approach of experimental and computational NMR techniques.

First-Principles Calculation of 1H NMR Chemical Shifts of Complex Metal Polyhydrides: The Essential Inclusion of Relativity and Dynamics

1H NMR spectroscopy has become an important technique for the characterization of transition-metal hydride complexes, whose metal-bound hydrides are often difficult to locate by X-ray diffraction. In this regard, the accurate prediction of 1H NMR chemical shifts provides a useful, but challenging, strategy to help in the interpretation of the experimental spectra. In this work, we establish a density-functional-theory protocol that includes relativistic, solvent, and dynamic effects at a high level of theory, allowing us to report an accurate and reliable interpretation of 1H NMR hydride chemical shifts of iridium polyhydride complexes. In particular, we have studied in detail the hydride chemical shifts of the [Ir6(IMe)8(CO)2H14]2+ complex in order to validate previous assignments. The computed 1H NMR chemical shifts are strongly dependent on the relativistic treatment, the choice of the DFT exchange-correlation functional, and the conformational dynamics. By combining a fully relativistic four-component electronic-structure treatment with ab initio molecular dynamics, we were able to reliably model both the terminal and bridging hydride chemical shifts and to show that two NMR hydride signals were inversely assigned in the experiment.

Gas-phase 21 Ne NMR studies and the nuclear magnetic dipole moment of neon-21

Gas-phase ²¹ Ne nuclear magnetic resonance spectra were measured at the natural abundance of ²¹ Ne isotope for samples consisting of pressurized neon up to 60 bar at room temperature and applying the magnetic field of the strength B₀ = 11.7574 T. It showed that the nuclear magnetic resonance frequency is linearly dependent on the density of gaseous neon. The resonance frequency was extrapolated to the zero-density point, and it permitted the determination of the ²¹ Ne nuclear magnetic moment, μ(²¹ Ne) = 0.6617774(10) μ_N . The present value of μ(²¹ Ne) is not influenced by the bulk magnetic susceptibility of neon and interactions between neon atoms; therefore, it is more precise and reliable than the previous result obtained for μ(²¹ Ne).

Method Calibration or Data Fitting?

We investigate by explicit parameter optimization to what extent basis sets of polarized double-ζ quality can introduce compensating errors in five different density functional methods. It is shown that minor changes in the contraction coefficients of the valence functions in the basis sets can have a significant impact and allow different density functional methods to achieve very similar performances. This holds for nuclear magnetic shielding constants and for isomerization energies, barrier heights, and noncovalent interactions. It is furthermore shown that errors due to neglect of vibrational and solvent effects can be absorbed in the combined method and basis set errors. These findings hold for data sets consisting of 50-150 data points. This raises the question of whether the common practice of identifying combinations of density functional methods and basis sets that have a good performance against a selected set of reference data should be considered as data fitting in the combined parameter space spanned by the method and basis set.

Relativistic Calculations of Nuclear Magnetic Resonance Parameters

Relativistic effects are important for the accurate evaluation of the observables of nuclear magnetic resonance (NMR) spectroscopy, the nuclear magnetic shielding and the indirect spin–spin coupling tensors. Some of the most notable relativistic effects, in particular for light elements in the vicinity of heavy nuclei, are due to spin–orbit effects, an effect difficult to evaluate when starting from a non-relativistic wavefunction. Two- and four-component relativistic methods include spin–orbit effects variationally, and the recent improvements in the computational efficiency of these methods open new opportunities for accurate calculations of NMR parameters also for molecules with heavy elements. We here present an overview of the different approximations that have been introduced for calculating relativistic effects with two- and four-component methods and how these methods can be used to calculate the NMR parameters. We will also give some examples of systems that have been studied computationally with two- and four-component relativistic methods and discuss the importance of relativistic effects on the shielding and indirect spin–spin coupling constants.

Encapsulation of xenon by a self-assembled Fe4L6 metallosupramolecular cage

We report (129)Xe NMR experiments showing that a Fe4L6 metallosupramolecular cage can encapsulate xenon in water with a binding constant of 16 M(-1). The observations pave the way for exploiting metallosupramolecular cages as economical means to extract rare gases as well as (129)Xe NMR-based bio-, pH, and temperature sensors. Xe in the Fe4L6 cage has an unusual chemical shift downfield from free Xe in water. The exchange rate between the encapsulated and free Xe was determined to be about 10 Hz, potentially allowing signal amplification via chemical exchange saturation transfer. Computational treatment showed that dynamical effects of Xe motion as well as relativistic effects have significant contributions to the chemical shift of Xe in the cage and enabled the replication of the observed linear temperature dependence of the shift.

Structure, solvent, and relativistic effects on the NMR chemical shifts in square-planar transition-metal complexes: assessment of DFT approaches

The role of various factors (geometry, solvent, relativistic treatment, functional) influencing the relativistic NMR chemical shift calculations for square-planar transition-metal complexes.

Relativistic calculations of magnetic resonance parameters: background and some recent developments

This article outlines some basic concepts of relativistic quantum chemistry and recent developments of relativistic methods for the calculation of the molecular properties that define the basic parameters of magnetic resonance spectroscopic techniques, i.e. nuclear magnetic resonance shielding, indirect nuclear spin-spin coupling and electric field gradients (nuclear quadrupole coupling), as well as with electron paramagnetic resonance g-factors and electron-nucleus hyperfine coupling. Density functional theory (DFT) has been very successful in molecular property calculations, despite a number of problems related to approximations in the functionals. In particular, for heavy-element systems, the large electron count and the need for a relativistic treatment often render the application of correlated wave function ab initio methods impracticable. Selected applications of DFT in relativistic calculation of magnetic resonance parameters are reviewed.

33S hyperfine interactions in H2S and SO2 and revision of the sulfur nuclear magnetic shielding scale

Using the Lamb-dip technique, the hyperfine structure in the rotational spectra of H2(33)S and (33)SO2 has been resolved and the corresponding parameters--that is, the sulfur quadrupole-coupling and spin-rotation tensors--were determined. The experimental parameters are in good agreement with results from high-level coupled-cluster calculations, provided that up to quadruple excitations are considered in the cluster operator, sufficiently large basis sets are used, and vibrational corrections are accounted for. The (33)S spin-rotation tensor for H2S has been used to establish a new sulfur nuclear magnetic shielding scale, combining the paramagnetic part of the shielding as obtained from the spin-rotation tensor with a calculated value for the diamagnetic part as well as computed vibrational and temperature corrections. The value of 716(5) ppm obtained in this way for the sulfur shielding of H2S is in good agreement with results from high-accuracy quantum-chemical calculations but leads to a shielding scale that is about 28 ppm lower than the one suggested previously in the literature, based on the (33)S spin-rotation constant of OCS.

Perspective: relativistic effects

This perspective article discusses some broadly-known and some less broadly-known consequences of Einstein's special relativity in quantum chemistry, and provides a brief outline of the theoretical methods currently in use, along with a discussion of recent developments and selected applications. The treatment of the electron correlation problem in relativistic quantum chemistry methods, and expanding the reach of the available relativistic methods to calculate all kinds of energy derivative properties, in particular spectroscopic and magnetic properties, requires on-going efforts.

Relativistic effects in chemistry: more common than you thought

Relativistic effects can strongly influence the chemical and physical properties of heavy elements and their compounds. This influence has been noted in inorganic chemistry textbooks for a couple of decades. This review provides both traditional and new examples of these effects, including the special properties of gold, lead-acid and mercury batteries, the shapes of gold and thallium clusters, heavy-atom shifts in NMR, topological insulators, and certain specific heats.