Density-functional calculation of CeO2 surfaces and prediction of effects of oxygen partial pressure and temperature on stabilities

Surface-Dependent Role of Oxygen Vacancies in Dimethyl Carbonate Synthesis from CO2 and Methanol over CeO2 Catalysts

The conversion of CO2 into value-added commodity chemicals, such as dimethyl carbonate (DMC), represents an environmentally friendly approach to CO2 utilization. This study exhaustively investigates the influence of oxygen vacancies (Ov) on CeO2 catalysts and, in particular, the role of surface structure. By integrating density functional theory calculations with experimental synthesis, we analyze the complex reaction mechanisms involved in DMC synthesis over both oxidized (Sto-(111), Sto-(110), and Sto-(100)) and nonoxidized (Ovsub-(111), Ovsur-(110), and Ovsur-(100)) CeO2 catalysts. Our findings indicate that Ov on the (111) surface inhibits DMC formation, whereas Ov on the (110) and (100) surfaces promotes it. This differential behavior is primarily attributed to Ov's modulation of the microscopic coordination environment on distinct surfaces, which impacts the rate-limiting step of C-O bond formation: CO2 + OCH3 → CH3OCOO (monodentate methyl carbonate, MMC) and CH3OCO + OCH3 → DMC. Additionally, analysis of the highly active Sto-(111) and Ovsur-(110) catalysts shows that their unique surface coordination microenvironments mitigate steric hindrance and facilitate an optimal arrangement of Lewis acid sites in proximity to Lewis base sites, thereby enhancing the DMC activity. This work underscores the pivotal role of surface structure in determining the effects of Ov, paving the way for the rational design of CeO2-based catalysts for the direct synthesis of DMC from CO2 and methanol.

Transition-Metal-Doped CeO2 for the Reverse Water-Gas Shift Reaction: An Experimental and Theoretical Study on CO2 Adsorption and Surface Vacancy Effects

Transition metal-doped ceria (M-CeO2) catalysts (M=Fe, Co, Ni and Cu) with multiple loadings were experimentally investigated for reverse water gas shift (RWGS) reaction. Density functional theory (DFT) calculations were performed to benchmark the properties that impact catalytic activity of CO2 reduction. Temperature-programmed desorption (TPD) was conducted to study the CO2 binding strength on doped CeO2 surfaces; the trend of the energy along increasing metal loading agrees with the DFT calculations. Notably, CO2 dissociative adsorption energy and oxygen vacancy (OV) formation energy are key descriptors obtained from both DFT and experiments, which can be used to evaluate catalytic performance. Results show the effectiveness of transition metal doping in enhancing CO2 adsorption and reducibility of the surfaces, with Fe showing particularly promising results, i. e., CO2 conversion higher than 56 % at 600 °C and 100 % selectivity to CO. Cu exhibits 100 % selectivity to CO but low CO2 conversion, while Co and Ni showed notable ability of methanation, particularly at high loadings. This study finds that an effective CeO2 based RWGS catalyst corresponds to OV sites that have low OV formation energies for surface reduction, and moderate CO2 adsorption energies for strong interaction with the surface to promote C-O bond scission.

CO adsorption on CeO2(111): A CCSD(T) benchmark study using an embedded-cluster model

A benchmark model that combines an embedded-cluster approach for ionic surfaces with wavefunction-based methods to predict the vibrational frequencies of molecules adsorbed on surfaces is presented. As a representative case, the adsorption of CO on the lowest index non-polar and most stable facet of CeO2, that is, (111) was studied. The CO harmonic vibrational frequencies were not scaled semiempirically but explicitly corrected for anharmonic effects, which amount to about 25 cm-1 with all tested methods. The second-order Møller-Plesset perturbation method (MP2) tends to underestimate the CO harmonic frequency by about 40-45 cm-1 in comparison with the results obtained with the coupled-cluster singles and doubles with perturbational treatment of triple excitation method [CCSD(T)] and independently from the basis set used. The best estimate for the CO vibrational frequency (low-coverage case) differs by 12 cm-1 with the experimental value obtained by infrared reflexion absorption spectroscopy of 1 monolayer CO adsorbed on the oxidized CeO2(111) surface. In addition, a conservative estimate of the adsorption energy of about -0.22 ± -0.07 eV obtained at the CCSD(T) level confirms the physisorption character of the adsorption of CO on the CeO2(111) surface.

Tracking the Facet Transformation of CeO2 by 17O Solid-State Nuclear Magnetic Resonance

CeO2 nanomaterials expose various crystal facets with distinct surface geometry, resulting in different surface reactivities and material behaviors that ultimately determine their performances and suitability for a wide range of applications. Here, we apply 17O solid-state nuclear magnetic resonance (NMR) to follow the facet transformation of CeO2 at increased temperatures, observing a transition from (100) to (110) and finally to the more stable (111), based on the characteristic NMR shifts associated with the unique surface structure of each facet. In addition, we explore the effects of Pt ions on the conversion of different facets, which are found to promote the formation of the thermally stable (111) facet. Furthermore, 17O solid-state NMR provides a semiquantitative method for measuring the fractions of exposed facets. This work offers new insights and a more comprehensive understanding of crystal facet structures, and the new approach can be readily extended to study the facets of other oxide-based materials.

Synthesis of vanillin via oxidation of kenaf stalks in the presence of CeO2: tuning the catalytic behaviour of CeO2 via nanostructure morphology

Different CeO2 nanostructures were synthesized using a hydrothermal method and treated with alkaline NaOH, followed by drying at 120 °C for 16 h and calcined at 400 °C for the direct oxidation of kenaf stalks to vanillin under microwave irradiation. The catalysts were characterized for their physicochemical properties using XRD, BET, Raman spectroscopy, TPR, TPO, and XPS. All synthesized CeO2 nanostructures show diffraction peaks corresponding to the formation of cubic fluorite, which agrees with Raman spectra of the F2g mode. The N2 adsorption-desorption isotherms showed that all catalysts possess a type IV isotherm, indicating a mesoporous structure. TPR and TPO analyses display formation peaks corresponding to surface-to-bulk reducibility and the oxidized oxygen ratio, which is responsible for the redox properties of ceria nanostructures. The XPS analysis of CeO2 nanostructures proved that Ce exists in the Ce3+ and Ce4+ oxidation states. All catalysts were tested for direct oxidation of kenaf stalks under microwave irradiation with the highest vanillin yield obtained by the CeO2-Nps-400 heterogeneous catalyst at 3.84%, whereas 4.66% vanillin was produced using 2 N NaOH as a homogeneous catalyst.

Theoretical study of structure sensitivity on ceria-supported single platinum atoms and its influence on carbon monoxide adsorption

Density functional theory (DFT) calculations explore the stability of a single platinum atom on various flat, stepped, and defective ceria surfaces, in the context of single-atom catalysts (SACs) for the water-gas shift (WGS) reaction. The adsorption properties and diffusion kinetics of the metal strongly depend on the support termination with large stability on metastable and stepped CeO2(100) and (210) surfaces where the diffusion of the platinum atom is hindered. At the opposite, the more stable CeO2(111) and (110) terminations weakly bind the platinum atom and can promote the growth of metallic clusters thanks to fast diffusion kinetics. The adsorption of carbon monoxide on the single platinum atom supported on the various ceria terminations is also sensitive to the surface structure. Carbon monoxide weakly binds to the single platinum atom supported on reduced CeO2(111) and (211) terminations. The desorption of the CO2 formed during the WGS reaction is thus facilitated on the latter terminations. A vibrational analysis underlines the significant changes in the calculated scaled anharmonic CO stretching frequency on these catalysts.

Formation of superoxide and ozone-like species on Cu doped CeO2(111) and their CO oxidation reactivity: a DFT study

The adsorption of O2 on Cu/CeO2(111) and the CO oxidation reactivity of the formed oxygen species were studied using the DFT method. The results showed that superoxide species (O2δ-), which directly interacted with Cu, formed when O2 adsorbed on the surface oxygen vacancies, while O2 adsorbed on the subsurface oxygen vacancies gave rise to ozone-like O3δ- species by combining with the nearest surface lattice oxygen (O1). PDOS showed that hybridization of the 2p orbitals between O2 and O1 formed a delocalized π bond, confirming the formation of O3δ-. For O2δ-, electrons on Cu and O1 transferred to O2 while the charge of Ce remained unchanged. However, for O3δ-, the transferred electrons were mainly from O1, and partially from O2, Ce1 and Ce2. It was very interesting that Cu also received a few electrons in the latter case. Compared with CO directly adsorbed on lattice oxygen, the two oxygen species were active for CO oxidation, forming CO2 or carbonates, and higher absolute adsorption energy was obtained with the interaction between CO and O3δ-. The findings of this study provide new insight on the CO oxidation reaction mechanism, facilitating an in-depth understanding of Cu-doped CeO2 catalysts.

Exploring the direction-dependency of conductive filament formation and oxygen vacancy migration behaviors in HfO2-based RRAM

Oxygen vacancy (V_O) defects play an essential role in governing the conductivity of semiconductor materials. The direction-dependency of oxygen vacancy conductive filament (CF) formation and V_O migration behaviors in HfO₂-based resistive random access memory (RRAM) were systematically investigated through first-principles calculations. The energetic and electronic structural analyses indicate that the continuous distribution of 3-fold oxygen vacancy (V_O3) or 4-fold oxygen vacancy (V_O4) is more favorable for the CF formation along [010] and [001] directions, and a continuous distribution between V_O3 and V_O4 in the m-HfO₂ system can also combine to promote the formation of CFs along a particular direction. Furthermore, the high annealing temperature and low oxygen partial pressure (P_O2) could effectively reduce the V_O formation energy and promote the formation of CFs, resulting in a lower applied voltage of the devices. Our results indicate that q = 0 and q = +2 are the most probable charge states for V_O3 and V_O4 in m-HfO₂. Subsequently, it is found that the low activation energy of V_O originates from the +2q charged V_O3 or V_O4 migrating in the CFs along a particular crystallographic [001] direction. The diffusion coefficient (D) of the oxygen atom along the [001] direction is much higher than that of all the other possible pathways considered, due to the lower energy barrier. This demonstrates that the growth of CFs is potentially direction-dependent, and that a lower forming voltage and lower SET voltage are required when the CFs are grown along a particular direction in RRAM devices. The present work would help to provide a fundamental guide and new understanding for the development and application of HfO₂-based RRAM.

Unravelling the role of dopants in the electrocatalytic activity of ceria towards CO2 reduction in solid oxide electrolysis cells

CO₂ reduction in Solid Oxide Electrolysis Cells (SOECs) is a key-technology for the transition to a sustainable energy infrastructure and chemical industry. Ceria (CeO₂) holds great promise in developing highly efficient, cost-effective and durable fuel electrodes, due to its promising electrocatalytic properties, and proven ability to suppress carbon deposition and to tolerate high concentrations of impurities. In the present work, we investigate the intrinsic electrocatalytic activity of ceria towards CO₂ reduction by means of electrochemical impedance spectroscopy (EIS) on model systems with well-defined geometry, composition and surface area. Aiming at the optimization of the intrinsic catalytic properties of the material, we systematically study the effect of different dopants (Zr, Gd, Pr and Bi) on the reaction rate under varying operating conditions (temperature, gas composition and applied polarization) relevant for SOECs. The electrochemical measurements reveal the dominant role of the surface defect chemistry of the material in the reaction rate, with doping having only a mild effect on the rate and activation energy of the reaction. By analyzing the pO₂ and overpotential dependence of the reaction rate with a general micro-kinetic model, we are able to identify the second electron transfer as the rate limiting step of the process, highlighting the dominant role of surface polarons in the energy landscape. These insights on the correlation between the surface defects and the electrocatalytic activity of ceria open new directions for the development of highly performing ceria-based technological electrodes.

Fluoride-assisted detection of glutathione by surface Ce3+/Ce4+ engineered nanoceria

Nanoceria has evolved as a promising nanomaterial due to its unique enzyme-like properties, including excellent oxidase mimetic activity, which significantly increases in the presence of fluoride ions. However, this significant increase in oxidase activity has never been utilised as a signal enhancer for the detection of biological analytes partly because of the lack of understanding of the mechanism involved in this process. In this study, we show that the surface oxidation state of cerium ions plays a very crucial role in different enzymatic activities, especially the oxidase mimetic activity by engineering nanoceria with three different surface Ce⁴⁺/Ce³⁺ compositions. Using DFT calculations combined with Bader charge analysis, it is demonstrated that stoichiometric ceria registers a higher oxidase mimetic activity than oxygen-deficient ceria with a low Ce⁴⁺/Ce³⁺ ratio due to a higher charge transfer from a substrate, 3,3',5,5' tetramethylbenzidine (TMB), to the ceria surface. We also show that the fluoride ions can significantly increase the charge transfer from the TMB surface to ceria irrespective of the surface Ce⁴⁺/Ce³⁺ ratio. Using this knowledge, we first compare the fluoride sensing properties of nanoceria with high Ce⁴⁺ and mixed Ce⁴⁺/Ce³⁺ oxidation states and further demonstrate that the linear detection range of fluoride ions can be extended to 1-10 ppm for nanoceria with mixed oxidation states. Then, we also demonstrate an assay for fluoride assisted detection of glutathione, an antioxidant with elevated levels during cancer, using nanoceria with a high surface Ce⁴⁺/Ce³⁺ ratio. The addition of fluoride ions in this assay allows the detection of glutathione in the linear range of 2.5-50 ppm with a limit of detection (LOD) of 3.8 ppm. These studies not only underpin the role of the surface Ce⁴⁺/Ce³⁺ ratio in tuning the fluoride assisted boost in the oxidase mimetic activity of nanoceria but also its strategic application in designing better colourimetric assays.

A Review of CeO2 Supported Catalysts for CO2 Reduction to CO through the Reverse Water Gas Shift Reaction

The catalytic conversion of CO2 to CO by the reverse water gas shift (RWGS) reaction followed by well-established synthesis gas conversion technologies could be a practical technique to convert CO2 to valuable chemicals and fuels in industrial settings. For catalyst developers, prevention of side reactions like methanation, low-temperature activity, and selectivity enhancements for the RWGS reaction are crucial concerns. Cerium oxide (ceria, CeO2) has received considerable attention in recent years due to its exceptional physical and chemical properties. This study reviews the use of ceria-supported active metal catalysts in RWGS reaction along with discussing some basic and fundamental features of ceria. The RWGS reaction mechanism, reaction kinetics on supported catalysts, as well as the importance of oxygen vacancies are also explored. Besides, recent advances in CeO2 supported metal catalyst design strategies for increasing CO2 conversion activity and selectivity towards CO are systematically identified, summarized, and assessed to understand the impacts of physicochemical parameters on catalytic performance such as morphologies, nanosize effects, compositions, promotional abilities, metal-support interactions (MSI) and the role of selected synthesis procedures for forming distinct structural morphologies. This brief review may help with future RWGS catalyst design and optimization.

Electronic excitation spectra of cerium oxides: from ab initio dielectric response functions to Monte Carlo electron transport simulations

Nanomaterials made of cerium oxides CeO₂ and Ce₂O₃ have a broad range of applications, from catalysts in automotive, industrial or energy operations to promising materials to enhance hadrontherapy effectiveness in oncological treatments. To elucidate the physico-chemical mechanisms involved in these processes, it is of paramount importance to know the electronic excitation spectra of these oxides, which are obtained here through high-accuracy linear-response time-dependent density functional theory calculations. In particular, the macroscopic dielectric response functions  of both bulk CeO₂ and Ce₂O₃ are derived, which compare remarkably well with the available experimental data. These results stress the importance of appropriately accounting for local field effects to model the dielectric function of metal oxides. Furthermore, we reckon the energy loss functions Im(-1/) of the materials, including the accurate evaluation of the momentum transfer dispersion from first-principles calculations. In this respect, by using Mermin-type parametrization we are able to model the contribution of different electronic excitations to the dielectric loss function. Finally, from the knowledge of the electron inelastic mean free path, together with the elastic mean free path provided by the relativistic Mott theory, we carry out statistical Monte Carlo (MC) electron transport simulations to reproduce the major features of the reported experimental reflection electron energy loss (REEL) spectra of cerium oxides. The good agreement with REEL experimental data strongly supports our approach based on MC modelling, whose main inputs were obtained using ab initio calculated electronic excitation spectra in a broad range of momentum and energy transfers.

The Influence of Porous Co/CeO1.88-Nitrogen-Doped Carbon Nanorods on the Specific Capacity of Li-O2 Batteries

Li-O₂ batteries are attracting considerable attention as a promising power source for electric vehicles as they have the highest theoretical energy density among reported rechargeable batteries. However, the low energy density and efficiency of Li-O₂ batteries still act as limiting factors in real cell implementations. This study proposes the cathode structure engineering strategy by tuning the thickness of a catalyst layer to enhance the Li-O₂ battery performance. The construction of the Li-O₂ battery with a thinner porous cathode leads less parasitic reactions at the solid electrolyte interface, maximization of the catalyst utilization, and facile transport of oxygen gas into the cathode. A remarkably high specific capacity of 33,009 mAh g^-1 and the extended electrochemical stability for 75 cycles at a 1000 mAh g^-1 limited capacity and 100 mA g^-1 were achieved when using the porous Co/CeO_1.88-nitrogen-doped carbon nanorod cathode. Further, a high discharge capacity of 20,279 mAh g^-1 was also achieved at a relatively higher current density of 300 mA g^-1. This work suggests the ideal cathode structure and the feasibility of the Co/CeO_1.88-nitrogen-doped carbon nanorod as the cathode material, which can minimize the areal cathode catalyst loading and maximize the gravimetric energy density.

Design strategies for ceria nanomaterials: untangling key mechanistic concepts

The morphologies of ceria nanocrystals play an essential role in determining their redox and catalytic performances in many applications, yet the effects of synthesis variables on the formation of ceria nanoparticles of different morphologies and their related growth mechanisms have not been systematised. The design of these morphologies is underpinned by a range of fundamental parameters, including crystallography, optical mineralogy, the stabilities of exposed crystallographic planes, CeO_2-x stoichiometry, phase equilibria, thermodynamics, defect equilibria, and the crystal growth mechanisms. These features are formalised and the key analytical methods used for analysing defects, particularly the critical oxygen vacancies, are surveyed, with the aim of providing a source of design parameters for the synthesis of nanocrystals, specifically CeO_2-x. However, the most important aspect in the design of CeO_2-x nanocrystals is an understanding of the roles of the main variables used for synthesis. While there is a substantial body of data on CeO_2-x morphologies fabricated using low cerium concentrations ([Ce]) under different experimental conditions, the present work fully maps the effects of the relevant variables on the resultant CeO_2-x morphologies in terms of the commonly used raw materials [Ce] (and [NO₃^-] in Ce(NO₃)₃·6H₂O) as feedstock, [NaOH] as precipitating agent, temperature, and time (as well as the complementary vapour pressure). Through the combination of consideration of the published literature and the generation of key experimental data to fill in the gaps, a complete mechanistic description of the development of the main CeO_2-x morphologies is illustrated. Further, the mechanisms of the conversion of nanochains into the two variants of nanorods, square and hexagonal, have been elucidated through crystallographic reasoning. Other key conclusions for the crystal growth process are the critical roles of (1) the formation of Ce(OH)₄ crystallite nanochains as the precursors of nanorods and (2) the disassembly of the nanorods into Ce(OH)₄ crystallites and NO₃^--assisted reassembly into nanocubes (and nanospheres) as an unrecognised intermediate stage of crystal growth.

Potential Control of Oxygen Non-Stoichiometry in Cerium Oxide and Phase Transition Away from Equilibrium

Cerium oxide (ceria, CeO₂) is a technologically important material for energy conversion applications. Its activities strongly depend on redox states and oxygen vacancy concentration. Understanding the functionality of chemical active species and behavior of oxygen vacancy during operation, especially in high-temperature solid-state electrochemical cells, is the key to advance future material design. Herein, the structure evolution of ceria is spatially resolved using bulk-sensitive operando X-ray diffraction and spectroscopy techniques. During water electrolysis, ceria undergoes reduction, and its oxygen non-stoichiometry shows a dependence on the electrochemical current. Cerium local bonding environments vary concurrently to accommodate oxygen vacancy formation, resulting in changes in Ce-O coordination number and Ce³⁺/Ce⁴⁺ redox couple. When reduced enough, a crystallographic phase transition occurs from α to an α' phase with more oxygen vacancies. Nevertheless, the transition behavior is intriguingly different from the one predicted in the standard phase diagram of ceria. This paper demonstrates a feasible means to control oxygen non-stoichiometry in ceria via electrochemical potential. It also sheds light on the mechanism of phase transitions induced by electrochemical potential. For electrochemical systems, effects from a large-scale electrical environment should be taken into consideration, besides effective oxygen partial pressure and temperature.

First-Principles Study on the Cu/Fe Interface Properties of Ternary Cu-Fe-X Alloys

The supersaturated Fe in Cu is known to reduce the electrical conductivity of Cu severely. However, the precipitation kinetics of Fe from Cu are sluggish. Alloying is one of the effective ways to accelerate the aging precipitation of Cu-Fe alloys. Nucleation plays an important role in the early stage of aging. The interface property of Cu/γ-Fe is a key parameter in understanding the nucleation mechanism of γ-Fe, which can be obviously affected with the addition of alloying elements. In this paper, first principles calculations were carried out to investigate the influence of alloying elements on the interface properties, including the geometric optimizations, interfacial energy, work of adhesion and electronic structure. Based on the previous research, 14 elements including B, Si, P, Al, Ge, S, Mg, Ag, Cd, Sn, In, Sb, Zr and Bi were selected for investigation. Results showed that all these alloying elements tend to concentrate in the Cu matrix with the specific substitution position of the atoms determined by the binding energy between Fe and alloy element (X). The bonding strength of the Cu/γ-Fe interface will decrease obviously after adding Ag, Mg and Cd, while a drop in interfacial energy of Cu/γ-Fe will happen when alloyed with Al, B, S, P, Si, Ge, Sn, Zr, Bi, Sb and In. Further study of the electronic structure found that Al and Zr were not effective alloying elements.

Localized versus itinerant character of 4f-states in cerium oxides

The electronic structure of cerium oxide is investigated here using a combination of ab initio one-electron theory and elements from many-body physics, with emphasis on the nature of the 4f electron shell of cerium ions. We propose to use the hybridization function as a convenient measure for the degree of localization of the 4f shell of this material, and observe that changing the oxidation state is related to distinct changes in the hybridization between the 4f shell and ligand states. The theory reveals that CeO₂ has essentially itinerant 4f states, and that in the least oxidized form of ceria, Ce₂O₃, the 4f states are almost (but not fully) localized. This conclusion is supported by additional calculations based on a combination of density functional theory and dynamical mean field theory. Most importantly, our model points to the fact that diffusion of oxygen vacancies in cerium oxide may be seen as polaron hopping, involving a correlated 4f electron cloud, which is located primarily on Ce ions of several atomic shells surrounding the vacancy.

Oxygen diffusion and vacancy migration thermally-activated govern high-temperature magnetism in ceria

Several experimental works currently demonstrate that metallic nano-oxides and carbon nanomaterials expected to be diamagnets, in fact, behave as ferromagnets at room temperature. More than scientifically intriguing, this unconventional and unexpected ferromagnetism pave the way for innovation products and novel nanotechnological applications, gathering the magnetism to interesting functionalities of these nanomaterials. Here, we investigate the non-conventional ferromagnetism observed at high temperatures in nanocrystalline cerium dioxide (CeO₂or nanoceria) thin films that are optically transparent to visible light. Nanoceria exhibits several concrete applications in catalytic processes, photovoltaic cells, solid-state fuel cells, among others, which are mostly due to natural presence of oxygen vacancies and easy migration of the oxygen through the structure. The ferromagnetism in non-stoichiometric nanocrystaline ceria can be consistently described by ab initio electronic structure calculations, which support that oxygen vacancies cause the formation of magnetic moments and can provide a robust interconnectivity within magnetic polarons theoretical framework. Additionally, we present a conceptual model to account the oxygen transport to the non-conventional ferromagnetism at temperatures well above room temperature. The approach is complementary to the thermally-activated effective transfers of charge and spin around oxygen vacancy centers.

Facet-Dependent Photodegradation of Methylene Blue Using Pristine CeO2 Nanostructures

This work comprises the shape- and facet-dependent catalytic efficacies of different morphologies of CeO₂, namely, hexagonal, rectangular, and square. The formation of different shapes of CeO₂ is controlled using polyvinyl pyrrolidone as a surfactant. The surface reactivity of formation of differently exposed CeO₂ facets is thoroughly investigated using UV-visible, photoluminescence, Raman, and X-ray photoelectron spectroscopies. A correlation between the growth of a surface-reactive facet and the corresponding oxygen vacancies is also established. Considering the tremendous contamination, caused by the textile effluents, the present study articulates the facet-dependent photocatalytic activities of pristine CeO₂ for complete degradation of methylene blue within 175 min. The observed degradation time deploying pristine CeO₂ as a catalyst is the shortest to be reported in the literature to our best knowledge.

Mechanism of Mercury Adsorption and Oxidation by Oxygen over the CeO₂ (111) Surface: A DFT Study

CeO₂ is a promising catalytic oxidation material for flue gas mercury removal. Density functional theory (DFT) calculations and periodic slab models are employed to investigate mercury adsorption and oxidation by oxygen over the CeO₂ (111) surface. DFT calculations indicate that Hg⁰ is physically adsorbed on the CeO₂ (111) surface and the Hg atom interacts strongly with the surface Ce atom according to the partial density of states (PDOS) analysis, whereas, HgO is adsorbed on the CeO₂ (111) surface in a chemisorption manner, with its adsorption energy in the range of 69.9–198.37 kJ/mol. Depending on the adsorption methods of Hg⁰ and HgO, three reaction pathways (pathways I, II, and III) of Hg⁰ oxidation by oxygen are proposed. Pathway I is the most likely oxidation route on the CeO₂ (111) surface due to it having the lowest energy barrier of 20.7 kJ/mol. The formation of the HgO molecule is the rate-determining step, which is also the only energy barrier of the entire process. Compared with energy barriers of Hg⁰ oxidation on the other catalytic materials, CeO₂ is more efficient at mercury removal in flue gas owing to its low energy barrier.

Initial Reduction of CO2 on Pd-, Ru-, and Cu-Doped CeO2(111) Surfaces: Effects of Surface Modification on Catalytic Activity and Selectivity

Surface modification by metal doping is an effective treatment technique for improving surface properties for CO₂ reduction. Herein, the effects of doped Pd, Ru, and Cu on the adsorption, activation, and reduction selectivity of CO₂ on CeO₂(111) were investigated by periodic density functional theory. The doped metals distorted the configuration of a perfect CeO₂(111) by weakening the adjacent Ce-O bond strength, and Pd doping was beneficial for generating a highly active O vacancy. The analyses of adsorption energy, charge density difference, and density of states confirmed that the doped metals were conducive for enhancing CO₂ adsorption, especially for Cu/CeO₂(111). The initial reductive dissociation CO₂ → CO* + O* on metal-doped CeO₂(111) followed the sequence of Cu- > perfect > Pd- > Ru-doped CeO₂(111); the reductive hydrogenation CO₂ + H → COOH* followed the sequence of Cu- > perfect > Ru- > Pd-doped CeO₂(111), in which the most competitive route on Cu/CeO₂(111) was exothermic by 0.52 eV with an energy barrier of 0.16 eV; the reductive hydrogenation CO₂ + H → HCOO* followed the sequence of Ru- > perfect > Pd-doped CeO₂(111). Energy barrier decomposition analyses were performed to identify the governing factors of bond activation and scission along the initial CO₂ reduction routes. Results of this study provided deep insights into the effect of surface modification on the initial reduction mechanisms of CO₂ on metal-doped CeO₂(111) surfaces.

IR spectroscopic investigations of chemical and photochemical reactions on metal oxides: bridging the materials gap

In this review, we highlight recent progress (2008–2016) in infrared reflection absorption spectroscopy (IRRAS) studies on oxide powders achieved by using different types of metal oxide single crystals as reference systems.

Assessing Hubbard-corrected AM05+U and PBEsol+U density functionals for strongly correlated oxides CeO2 and Ce2O3

The structure–property relationships of bulk CeO₂ and Ce₂O₃ have been investigated within the DFT+U framework. AM05+U and PBEsol+U reproduce experimental crystalline parameters and properties with superior accuracy compared to conventional Hubbard-corrected exchange–correlation functionals.

Synthesis of ceria based superhydrophobic coating on Ni20Cr substrate via cathodic electrodeposition

In this work, superhydrophobic cerium oxide coating surface (111) with dual scale texture on Ni20Cr substrate is obtained by combination of electropolishing the substrate and subsequent cathodic electrodeposition and long-term UVH surface relaxation. To form hierarchical structures of CeO2 is controllable by varying the substrate roughness, and electropolishing period. The results indicated that at the optimal condition, the surface of the cerium oxide coating showed a superhydrophobicity with a great water contact angle (151.0 ± 1.4°) with Gecko state. An interface model for electropolishing of substrate surface in cerium nitrate medium is proposed. We expect that this facile process can be readily and widely adopted for the design of superhydrophobic coating on engineering materials.

Identification of different oxygen species in oxide nanostructures with (17)O solid-state NMR spectroscopy

Nanostructured oxides find multiple uses in a diverse range of applications including catalysis, energy storage, and environmental management, their higher surface areas, and, in some cases, electronic properties resulting in different physical properties from their bulk counterparts. Developing structure-property relations for these materials requires a determination of surface and subsurface structure. Although microscopy plays a critical role owing to the fact that the volumes sampled by such techniques may not be representative of the whole sample, complementary characterization methods are urgently required. We develop a simple nuclear magnetic resonance (NMR) strategy to detect the first few layers of a nanomaterial, demonstrating the approach with technologically relevant ceria nanoparticles. We show that the (17)O resonances arising from the first to third surface layer oxygen ions, hydroxyl sites, and oxygen species near vacancies can be distinguished from the oxygen ions in the bulk, with higher-frequency (17)O chemical shifts being observed for the lower coordinated surface sites. H2 (17)O can be used to selectively enrich surface sites, allowing only these particular active sites to be monitored in a chemical process. (17)O NMR spectra of thermally treated nanosized ceria clearly show how different oxygen species interconvert at elevated temperature. Density functional theory calculations confirm the assignments and reveal a strong dependence of chemical shift on the nature of the surface. These results open up new strategies for characterizing nanostructured oxides and their applications.

Initial reduction of CO2 on perfect and O-defective CeO2 (111) surfaces: towards CO or COOH?

CO₂ hydrogenation towards COOH is more favorable on perfect CeO₂ (111) surface, whereas reductive dissociation of CO₂ is predominant on O-defective surface. The O vacancy promotes reductive dissociation of CO₂ on O-defective CeO₂ (111) surface.

Highly efficient solid state catalysis by reconstructed (001) ceria surface

Substrate engineering is a key factor in the synthesis of new complex materials. The substrate surface has to be conditioned in order to minimize the energy threshold for the formation of the desired phase or to enhance the catalytic activity of the substrate. The mechanism of the substrate activity, especially of technologically relevant oxide surfaces, is poorly understood. Here we design and synthesize several distinct and stable CeO2 (001) surface reconstructions which are used to grow epitaxial films of the high-temperature superconductor YBa2Cu3O7. The film grown on the substrate having the longest, fourfold period, reconstruction exhibits a twofold increase in performance over surfaces with shorter period reconstructions. This is explained by the crossover between the nucleation site dimensions and the period of the surface reconstruction. This result opens a new avenue for catalysis mediated solid state synthesis.

Imaging the atomic surface structures of CeO2 nanoparticles

Atomic surface structures of CeO2 nanoparticles are under debate owing to the lack of clear experimental determination of the oxygen atom positions. In this study, with oxygen atoms clearly observed using aberration-corrected high-resolution electron microscopy, we determined the atomic structures of the (100), (110), and (111) surfaces of CeO2 nanocubes. The predominantly exposed (100) surface has a mixture of Ce, O, and reduced CeO terminations, underscoring the complex structures of this polar surface that previously was often oversimplified. The (110) surface shows "sawtooth-like" (111) nanofacets and flat CeO2-x terminations with oxygen vacancies. The (111) surface has an O termination. These findings can be extended to the surfaces of differently shaped CeO2 nanoparticles and provide insight about face-selective catalysis.

A DFT + U computational study on stoichiometric and oxygen deficient M–CeO2 systems (M = Pd1, Rh1, Rh10, Pd10 and Rh4Pd6)

Molecular and dissociative adsorption processes of ethanol on stoichiometric and O-defected CeO₂(111) surfaces alone as well as in the presence of one metal atom (Pd or Rh) are studied using spin-polarized density functional theory (DFT) with the GGA + U method (U_eff = 5.0 eV).

Oxygen vacancy formation in CeO2 and Ce(1-x)Zr(x)O2 solid solutions: electron localization, electrostatic potential and structural relaxation

Ceria (CeO(2)) and ceria-based composite materials, especially Ce(1-x)Zr(x)O(2) solid solutions, possess a wide range of applications in many important catalytic processes, such as three-way catalysts, owing to their excellent oxygen storage capacity (OSC) through the oxygen vacancy formation and refilling. Much of this activity has focused on the understanding of the electronic and structural properties of defective CeO(2) with and without doping, and comprehending the determining factor for oxygen vacancy formation and the rule to tune the formation energy by doping has constituted a central issue in material chemistry related to ceria. However, the calculation on electronic structures and the corresponding relaxation patterns in defective CeO(2-x) oxides remains at present a challenge in the DFT framework. A pragmatic approach based on density functional theory with the inclusion of on-site Coulomb correction, i.e. the so-called DFT + U technique, has been extensively applied in the majority of recent theoretical investigations. Firstly, we review briefly the latest electronic structure calculations of defective CeO(2)(111), focusing on the phenomenon of multiple configurations of the localized 4f electrons, as well as the discussions of its formation mechanism and the catalytic role in activating the O(2) molecule. Secondly, aiming at shedding light on the doping effect on tuning the oxygen vacancy formation in ceria-based solid solutions, we summarize the recent theoretical results of Ce(1-x)Zr(x)O(2) solid solutions in terms of the effect of dopant concentrations and crystal phases. A general model on O vacancy formation is also discussed; it consists of electrostatic and structural relaxation terms, and the vital role of the later is emphasized. Particularly, we discuss the crucial role of the localized structural relaxation patterns in determining the superb oxygen storage capacity in kappa-phase Ce(1-x)Zr(1-x)O(2). Thirdly, we briefly discuss some interesting findings for the oxygen vacancy formation in pure ceria nanoparticles (NPs) uncovered by DFT calculations and compare those with the bulk or extended surfaces of ceria as well as different particle sizes, emphasizing the role of the electrostatic field in determining the O vacancy formation.

Charge redistribution mechanisms of ceria reduction

Charge redistribution at low oxygen vacancy concentrations in ceria have been studied in the framework of the density functional theory. We propose a model to approach the dilute limit using the results of supercell calculations. It allows one to reproduce the characteristic experimentally observed behavior of composition versus oxygen pressure dependency. We show that in the dilute limit the charge redistribution is likely to be driven by a mechanism different from the one involving electron localization on cerium atoms. We demonstrate that it can involve charge localization on light element impurities.