Vapor-liquid equilibrium and critical behavior of the square-well fluid of variable range: A theoretical study

On the dynamically arrested states of equilibrium and non-equilibrium gels: a comprehensive Brownian dynamics study

In this work a systematic study over a wide number of final thermodynamic states for two gel-forming liquids was performed. Such two kind of gel formers are distinguished by their specific interparticle interaction potential. We explored several thermodynamic states determining the thermodynamic, structural and dynamic properties of both liquids after a sudden temperature change. The thermodynamic analysis allows to identify that the liquid with short range attraction and long range repulsion lacks of a stable gas-liquid phase separation liquid, in contrast with the liquid with short range attractions. Thus, although for some thermodynamic states the structural behavior, measured by the static structure factor, is similar to and characteristic of the gel phase, for the short range attractive fluid the gel phase is a consequence of a spinodal decomposition process. In contrast, gelation in the short range attraction and long range repulsion liquid is not due to a phase separation. We also analyze the similarities and differences of the dynamic behavior of both systems through the analysis of the mean square displacement, the self part of the intermediate scattering function, the diffusion coefficient and theαrelaxation time. Finally, using one of the main results of the non-equilibrium self-consistent generalized Langevin equation theory (NE-SCGLE), we determine the dynamic arrest phase diagram in the volume fraction and temperature (φvsT) plane.

Soft representation of the square-well and square-shoulder potentials to be used in Brownian and molecular dynamics simulations

The discrete hard-sphere (HS), square-well (SW), and square-shoulder (SS) potentials have become the battle horse of molecular and complex fluids because they contain the basic elements to describe the thermodynamic, structural, and transport properties of both types of fluids. The mathematical simplicity of these discrete potentials allows us to obtain some analytical results despite the nature and complexity of the modeled systems. However, the divergent forces arising at the potential discontinuities may lead to severe issues when discrete potentials are used in computer simulations with uniform time steps. One of the few routes to avoid these technical problems is to replace the discrete potentials with continuous and differentiable forms built under strict physical criteria to capture the correct phenomenology. The match of the second virial coefficient between the discrete and the soft potentials has recently been successfully used to construct a continuous representation that mimics some physical properties of HSs (Báezet al2018J. Chem. Phys.149164907). In this paper, we report an extension of this idea to construct soft representations of the discrete SW and SS potentials. We assess the accuracy of the resulting soft potential by studying structural and thermodynamic properties of the modeled systems by using extensive Brownian and molecular dynamics computer simulations. Besides, Monte Carlo results for the original discrete potentials are used as benchmark. We have also implemented the discrete interaction models and their soft counterparts within the integral equations theory of liquids, finding that the most widely used approximations predict almost identical results for both potentials.

Thermodynamics, static properties and transport behaviour of fluids with competing interactions

Competing interaction fluids have become ideal model systems to study a large number of phenomena, for example, the formation of intermediate range order structures, condensed phases not seen in fluids driven by purely attractive or repulsive forces, the onset of particle aggregation under in- and out-of-equilibrium conditions, which results in the birth of reversible and irreversible aggregates or clusters whose topology and morphology depend additionally on the thermodynamic constrictions, and a particle dynamics that has a strong influence on the transport behaviour and rheological properties of the fluid. In this contribution, we study a system of particles interacting through a potential composed by a continuous succession of a short-ranged square-well (SW), an intermediate-ranged square-shoulder and a long-ranged SW. This potential model is chosen to systematically analyse the contribution of every component of the interaction potential on the phase behaviour, the microstructure, the morphology of the resulting aggregates and the transport phenomena of fluids described by competing interactions. Our results indicate that the inclusion of a barrier and a second well leads to new and interesting effects, which in addition result in variations of the physical properties associated to the competition among interactions.

Thermodynamic mechanism of the density and compressibility anomalies of water in the range - 30 < T (°C) < 100

Compared to normal liquids, water exhibits a variety of anomalous thermal behaviors. This fact has been known for centuries. However, the thermodynamic mechanisms behind them have not been elucidated despite the efforts of many researchers. Under such circumstances, the author theoretically reproduced the measured values of the density-temperature curve at 1 atm for water above 0 \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^\circ $$\end{document}∘C. Then, the mystery of negative thermal expansion was clarified in relation to the shapes of the intermolecular interactions. In this paper, the author develops this line of work further and presents the interactions between water molecules to simultaneously reproduce the measured values of both the density-temperature curve and the isothermal compressibility-temperature curve in the range \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$-30<T(^\circ {\mathrm{C}})<100$$\end{document}-30<T(∘C)<100 at 1 atm. Then, the thermodynamic mechanism that produces these thermal behaviors is clarified in relation to the shapes of the interactions between molecules. Unraveling the mystery of related phenomena in relation to the shapes of the interaction between molecules has been a traditional and fundamental method in physics since the days of Newton.

Extended law of corresponding states: square-well oblates

The vapour-liquid coexistence collapse in the reduced temperature,T_r=T/T_c, reduced density,ρ_r=ρ/ρ_c, plane is known as a principle of corresponding states, and Noro and Frenkel have extended it for pair potentials of variable range. Here, we provide a theoretical basis supporting this extension, and show that it can also be applied to short-range pair potentials where both repulsive and attractive parts can be anisotropic. We observe that the binodals of oblate hard ellipsoids for a given aspect ratio (κ= 1/3) with varying short-range square-well interactions collapse into a single master curve in theΔB2*-ρ_rplane, whereΔB2*=(B2(T)-B2(Tc))/v0,B₂is the second virial coefficient, andv₀is the volume of the hard body. This finding is confirmed by both REMC simulation and second virial perturbation theory for varying square-well shells, mimicking uniform, equator, and pole attractions. Our simulation results reveal that the extended law of corresponding states is not related to the local structure of the fluid.

Location of the gel-like boundary in patchy colloidal dispersions: Rigidity percolation, structure, and particle dynamics

During the past decade, there has been a hot debate about the physical mechanisms that determine when a colloidal dispersion approaches the gel transition. However, there is still no consensus on a possible unique route that leads to the conditions for the formation of a gel-like state. Based on gel states identified in experiments, Valadez-Pérez et al. [Phys. Rev. E 88, 060302(R) (2013)PLEEE81539-375510.1103/PhysRevE.88.060302] proposed rigidity percolation as the precursor of colloidal gelation in adhesive hard-sphere dispersions with coordination number 〈n_{b}〉 equal to 2.4. Although this criterion was originally established to describe mechanical transitions in network-forming molecular materials with highly directional interactions, it worked well to explain gel formation in colloidal suspensions with isotropic short-range attractive forces. Recently, this idea has also been used to account for the dynamical arrest experimentally observed in attractive spherocylinders. Then, by assuming that rigidity percolation also drives gelation in spherical colloids interacting with short-ranged and highly directional potentials, we locate the thermodynamic states where gelation seems to occur in dispersions made up of patchy colloids. To check whether the criterion 〈n_{b}〉=2.4 also holds in patchy colloidal systems, we apply the so-called bond-bending analysis to determine the fraction of floppy modes at some percolating clusters. This analysis confirms that the condition 〈n_{b}〉=2.4 is a good approximation to determine those percolating clusters that are either mechanically stable or rigid. Furthermore, our results point out that not all combinations of patches and coverages lead to a gel-like state. Additionally, we systematically study the structure and the cluster size distribution along those thermodynamic states identified as gels. We show that for high coverage values, the structure is very similar for systems that have the same coverage regardless the number or the position of the patches on the particle surface. Finally, by using dynamic Monte Carlo computer simulations, we calculate both the mean-square displacement and the intermediate scattering function at and in the neighborhood of the gel-like states.

Slices of the Anomalous Phase Cube Depict Regions of Sub- and Super-Diffusion in the Fractional Diffusion Equation

Fractional-order time and space derivatives are one way to augment the classical diffusion equation so that it accounts for the non-Gaussian processes often observed in heterogeneous materials. Two-dimensional phase diagrams—plots whose axes represent the fractional derivative order—typically display: (i) points corresponding to distinct diffusion propagators (Gaussian, Cauchy), (ii) lines along which specific stochastic models apply (Lévy process, subordinated Brownian motion), and (iii) regions of super- and sub-diffusion where the mean squared displacement grows faster or slower than a linear function of diffusion time (i.e., anomalous diffusion). Three-dimensional phase cubes are a convenient way to classify models of anomalous diffusion (continuous time random walk, fractional motion, fractal derivative). Specifically, each type of fractional derivative when combined with an assumed power law behavior in the diffusion coefficient renders a characteristic picture of the underlying particle motion. The corresponding phase diagrams, like pages in a sketch book, provide a portfolio of representations of anomalous diffusion. The anomalous diffusion phase cube employs lines of super-diffusion (Lévy process), sub-diffusion (subordinated Brownian motion), and quasi-Gaussian behavior to stitch together equivalent regions.

Self-diffusion coefficient of the square-well fluid from molecular dynamics simulations within the constant force approach

We present a systematic study of the self-diffusion coefficient for a fluid of particles interacting via the square-well pair potential by means of molecular dynamics simulations in the canonical (N, V, T) ensemble. The discrete nature of the interaction potential is modeled by the constant force approximation, and the self-diffusion coefficient is determined for several fluid densities at supercritical thermodynamic states. The dependence of the self-diffusion coefficient on the potential range λ is analyzed in the range of 1.1 ≤ λ ≤ 1.5. The obtained simulation results are in agreement with the self-diffusion coefficient predicted by the Enskog method. Additionally, we show that the diffusion coefficient is very sensitive to the potential range λ. Our results for the self-diffusion coefficient times density extrapolate well to the values in the zero-density limit obtained from the Chapman-Enskog theory for dilute gases. The constant force approximation used in this work to model the discrete pair potentials has shown to be an excellent scheme to compute the transport properties of square-well fluids using molecular dynamics simulations. Finally, the simulation results presented here are useful for improving theoretical approaches, such as the Enskog method.

Surface tension of a Yukawa fluid according to mean-field theory

Yukawa fluids consist of particles that interact through a repulsive or attractive Yukawa potential. A surface tension arises at the walls of the container that encloses the fluid or at the interface between two coexisting phases. We calculate that surface tension on the level of mean-field theory, thereby either ignoring the particle size (ideal Yukawa fluid) or accounting for a non-vanishing particle size through a nonideal contribution to the free energy, exemplified either on the level of a lattice gas (lattice Yukawa fluid) or based on the Carnahan-Starling equation of state (Carnahan-Starling Yukawa fluid). Our mean-field results, which do not rely on assuming small gradients of the particle concentrations, become exact in the limit of large temperature and large screening length. They are calculated numerically in the general case and analytically in the two limits of small particle concentration and close to the critical point for a phase-separating system. For a sufficiently small particle concentration, our predicted surface tension is accurate whereas for a phase boundary, we expect good agreement with exact calculations in the limit of a large screening length and if the mean-field model employs the Carnahan-Starling equation of state.

Structure of colloidal gels at intermediate concentrations: the role of competing interactions

Colloidal gels formed by colloid-polymer mixtures with an intermediate volume fraction (ϕ_c ≈ 0.4) are investigated by confocal microscopy. In addition, we have performed Monte Carlo simulations based on a simple effective pair potential that includes a short-range attractive contribution representing depletion interactions, and a longer-range repulsive contribution describing the electrostatic interactions due to the presence of residual charges. Despite neglecting non-equilibrium effects, experiments and simulations yield similar gel structures, characterised by, e.g., the pair, angular and bond distribution functions. We find that the structure hardly depends on the strength of the attraction if the electrostatic contribution is fixed, but changes significantly if the electrostatic screening is changed. This delicate balance between attractions and repulsions, which we quantify by the second virial coefficient, also determines the location of the gelation boundary.

Tuning protein-protein interactions using cosolvents: specific effects of ionic and non-ionic additives on protein phase behavior

Cosolvents are routinely used to modulate the (thermal) stability of proteins and, hence, their interactions with proteins have been studied intensely. However, less is known about their specific effects on protein-protein interactions, which we characterize in terms of the protein phase behavior. We analyze the phase behavior of lysozyme solutions in the presence of sodium chloride (NaCl), guanidine hydrochloride (GuHCl), glycerol, and dimethyl sulfoxide (DMSO). We experimentally determined the crystallization boundary (XB) and, in combination with data on the cloud-point temperatures (CPTs), the crystallization gap. In agreement with other studies, our data indicate that the additives might affect the protein phase behavior through electrostatic screening and additive-specific contributions. At high salt concentrations, where electrostatic interactions are screened, both the CPT and the XB are found to be linear functions of the additive concentration. Their slopes quantify the additive-specific changes of the phase behavior and thus of the protein-protein interactions. While the specific effect of NaCl is to induce attractions between proteins, DMSO, glycerol and GuHCl (with increasing strength) weaken attractions and/or induce repulsions. Except for DMSO, changes of the CPT are stronger than those of the XB. Furthermore, the crystallization gap widens in the case of GuHCl and glycerol and narrows in the case of NaCl. We relate these changes to colloidal interaction models, namely square-well and patchy interactions.

Microcanonical ensemble simulation method applied to discrete potential fluids

In this work we extend the applicability of the microcanonical ensemble simulation method, originally proposed to study the Ising model [A. Hüller and M. Pleimling, Int. J. Mod. Phys. C 13, 947 (2002)0129-183110.1142/S0129183102003693], to the case of simple fluids. An algorithm is developed by measuring the transition rates probabilities between macroscopic states, that has as advantage with respect to conventional Monte Carlo NVT (MC-NVT) simulations that a continuous range of temperatures are covered in a single run. For a given density, this new algorithm provides the inverse temperature, that can be parametrized as a function of the internal energy, and the isochoric heat capacity is then evaluated through a numerical derivative. As an illustrative example we consider a fluid composed of particles interacting via a square-well (SW) pair potential of variable range. Equilibrium internal energies and isochoric heat capacities are obtained with very high accuracy compared with data obtained from MC-NVT simulations. These results are important in the context of the application of the Hüller-Pleimling method to discrete-potential systems, that are based on a generalization of the SW and square-shoulder fluids properties.

Common behavior of the critical properties of the 2D and 3D square-well fluids

We have analyzed the behavior of the critical properties and second virial coefficient of the square well fluids in two (2D) and three dimensions (3D) as a function of the interaction range. In both systems, the critical density shows an oscillating-like behavior as the interaction range increases. The second virial coefficient evaluated at the critical temperature as a function of the interaction range shows a general behavior for both cases, and quite surprisingly, there is a minimum of this parameter, for the 2D and 3D fluids, located approximately at the same interaction range. These findings are discussed in terms of the structure of the fluids, via the analysis of the radial distribution function evaluated at the critical point.

Coupling-parameter expansion in thermodynamic perturbation theory

An approach to the coupling-parameter expansion in the liquid state theory of simple fluids is presented by combining the ideas of thermodynamic perturbation theory and integral equation theories. This hybrid scheme avoids the problems of the latter in the two phase region. A method to compute the perturbation series to any arbitrary order is developed and applied to square well fluids. Apart from the Helmholtz free energy, the method also gives the radial distribution function and the direct correlation function of the perturbed system. The theory is applied for square well fluids of variable ranges and compared with simulation data. While the convergence of perturbation series and the overall performance of the theory is good, improvements are needed for potentials with shorter ranges. Possible directions for further developments in the coupling-parameter expansion are indicated.

Thermodynamics of dipolar hard spheres with low-to-intermediate coupling constants

The thermodynamic properties of the dipolar hard-sphere fluid are studied using theory and simulation. A new theory is derived using a convenient mathematical approximation for the Helmholtz free energy relative to that for the hard-sphere fluid. The approximation is designed to give the correct low-density virial expansion. New theoretical and numerical results for the fourth virial coefficient are given. Predictions of thermodynamic functions for dipolar coupling constants λ=1 and 2 show excellent agreement with simulation results, even at the highest value of the particle volume fraction φ. For higher values of λ, there are deviations at high volume fractions, but the correct low-density behavior is retained. The theory is compared critically against the established thermodynamic perturbation theory; it gives significant improvements at low densities and is more convenient in terms of the required numerics. Dipolar hard spheres provide a basic model for ferrofluids, and the theory is accurate for typical experimental parameters λ </~ 2 and φ </~ 0.1. This is demonstrated explicitly by fitting osmotic equations of state for real ferrofluids measured recently by analytical centrifugation.

Statistical thermodynamics of fluids with both dipole and quadrupole moments

New Gibbs ensemble simulation data for a polar fluid modeled by a square-well potential plus dipole-dipole, dipole-quadrupole, and quadrupole-quadrupole interactions are presented. This simulation data is used in order to assess the applicability of the multipolar square-well perturbation theory [A. L. Benavides, Y. Guevara, and F. del Río, Physica A 202, 420 (1994)] to systems where more than one term in the multipole expansion is relevant. It is found that this theory is able to reproduce qualitatively well the vapor-liquid phase diagram for different multipolar moment strengths, corresponding to typical values of real molecules, except in the critical region. Hence, this theory is used to model the behavior of substances with multiple chemical bonds such as carbon monoxide and nitrous oxide and we found that with a suitable choice of the values of the intermolecular parameters, the vapor-liquid equilibrium of these species is adequately estimated.

Reformulation of liquid perturbation theory for low temperatures

A perturbation strategy is proposed which allows liquid perturbation methodology to be applied to extremely low temperature situations for which the available liquid integral equation theory and traditional thermodynamic perturbation theory fail. The possibility of avoiding the low temperature problem of the thermodynamic perturbation theory not only is of relevance to the investigation of complex fluids, but also may be useful for reformulation of other liquid theories to achieve higher accuracy and avoid the respective low temperature problems.