Electron attachment to POCl3: Measurement and theoretical analysis of rate constants and branching ratios as a function of gas pressure and temperature, electron temperature, and electron energy

On the Competition Between Electron Autodetachment and Dissociation of Molecular Anions

We treat the competition between autodetachment of electrons and unimolecular dissociation of excited molecular anions as a rigid-/loose-activated complex multichannel reaction system. To start, the temperature and pressure dependences under thermal excitation conditions are represented in terms of falloff curves of separated single-channel processes within the framework of unimolecular reaction kinetics. Channel couplings, caused by collisional energy transfer and "rotational channel switching" due to angular momentum effects, are introduced afterward. The importance of angular momentum considerations is stressed in addition to the usual energy treatment. Non-thermal excitation conditions, such as typical for chemical activation and complex-forming bimolecular reactions, are considered as well. The dynamics of excited SF₆^- anions serves as the principal example. Other anions such as CF₃^- and POCl₃^- are also discussed.

Electron attachment to C2 fluorocarbon radicals at high temperature

Thermal electron attachment to the radical species C2F3 and C2F5 has been studied over the temperature range 300-890 K using the Variable Electron and Neutral Density Attachment Mass Spectrometry technique. Both radicals exclusively undergo dissociative attachment to yield F(-). The rate constant for C2F5 shows little dependence over the temperature range, remaining ~4 × 10(-9) cm(3) s(-1). The rate constant for C2F3 attachment rises steeply with temperature from 3 × 10(-11) cm(3) s(-1) at 300 K to 1 × 10(-9) cm(3) s(-1) at 890 K. The behaviors of both species at high temperature are in agreement with extrapolations previously made from data below 600 K using a recently developed kinetic modeling approach. Measurements were also made on C2F3Br and C2F5Br (used in this work as precursors to the radicals) over the same temperature range, and, for C2F5Br as a function of electron temperature. The attachment rate constants to both species rise with temperature following Arrhenius behavior. The attachment rate constant to C2F5Br falls with increasing electron temperature, in agreement with the kinetic modeling. The current data fall in line with past predictions of the kinetic modeling approach, again showing the utility of this simplified approach.

Pressure and temperature dependence of dissociative and non-dissociative electron attachment to CF3: experiments and kinetic modeling

The kinetics of electron attachment to CF(3) as a function of temperature (300-600 K) and pressure (0.75-2.5 Torr) were studied by variable electron and neutral density attachment mass spectrometry exploiting dissociative electron attachment to CF(3)Br as a radical source. Attachment occurs through competing dissociative (CF(3) + e(-) → CF(2) + F(-)) and non-dissociative channels (CF(3) + e(-) → CF(3)(-)). The rate constant of the dissociative channel increases strongly with temperature, while that of the non-dissociative channel decreases. The rate constant of the non-dissociative channel increases strongly with pressure, while that of the dissociative channel shows little dependence. The total rate constant of electron attachment increases with temperature and with pressure. The system is analyzed by kinetic modeling in terms of statistical theory in order to understand its properties and to extrapolate to conditions beyond those accessible in the experiment.

Experimental and theoretical study of the reaction of POCl(3) (-) with O(2)

The oxidation of the trichlorooxyphosphorus anion (POCl(3) (-)), which takes place in combustion flames, has been examined experimentally at a variety of temperatures and theoretically via ab initio and density functional methods. The reaction was examined in a turbulent ion flow tube and kinetics was measured between 300 and 626 K, estimating an overall reaction barrier of 1.23 kcal/mol. Calculations at the density functional, Moller-Plesset second order perturbation, and coupled cluster levels of theory with basis sets up to augmented triple-zeta quality point to a multistep reaction mechanism involving an initial [OP(Cl)(3)(OO)](-) intermediate, an adduct between triplet O(2) with POCl(3) (-), subsequent formation of a four-membered nonplanar P-O-O-Cl ring transition state, with concomitant breaking of the P-Cl and O-O bonds to provide a transient intermediate [OP(Cl)(2)OO...Cl](-), which, in turn, converts to the product complex (POCl(2) (-))(ClO) upon formation of the Cl-O bond without barrier. The calculated energy of the four-membered transition state is considered to be in good agreement with the small overall barrier found by experiment. The final step is responsible for the large exothermicity of the reaction.

Dissociative recombination of OPCl+ and OPCl2+: pushing the upper mass limit at CRYRING

The dissociative recombination of OPCl+ and OPCl2+ has been studied at the storage ring CRYRING. The rate constants as a function of electron temperature have been derived to be 7.63 x 10(-7)(Te/300)(-0.89) and >1.2 x 10(-6)(Te/300)(-1.22) cm3s(-1), respectively. The lower limit quoted for the latter rate constant reflects the experimental inability to detect all of the reaction products. The branching fractions from the reaction have been measured for OPCl+ at approximately 0 eV interaction energy and are determined to be N(O+P+Cl)=(16+/-7)%, N(O+PCl)=(16+/-3)% and N(OP+Cl)=(68+/-5)%. These values have been obtained assuming that the rearrangement channel forming P+ClO is negligible, and ab initio calculations using GAUSSIAN03 are presented for the ion structures and energetics to support such an assumption. Finally, the limitations to using heavy ion storage rings such as CRYRING for studies into the dissociative recombination of large singly charged molecular ions are discussed.

Electron affinities of heavier phosphoryl and thiophosphoryl halides APX3 (A = O, S and X = Br, I)

We carried out computational studies of OPX3 and SPX3 (X = Br and I) molecules and their corresponding anions using density functional theory, Møller-Plesset, and CCSD(T) methods with newly developed model core potentials (MCP). Reliabilities of the MCP were demonstrated by comparing experimental and calculated results. We computed the geometric structure, electron affinities, and electrostatic moments using systematic sequences of the dzp-, tzp-, and qzp-quality basis sets. Both C3v and Cs symmetries were assumed to ascertain that minima on the potential energy surface were found. Infrared and Raman frequencies were calculated and compared with available experimental data. Natural population analyses were performed and used to determine distribution of the extra electron in anions.

Kinetics of Sulfur Oxide, Sulfur Fluoride, and Sulfur Oxyfluoride Anions with Atomic Species at 298 and 500 K

The rate constants and product-ion branching ratios for the reactions of sulfur dioxide (SO2-), sulfur fluoride (SFn-), and sulfur oxyfluoride anions (SOxFy-) with H, H2, N, N2, NO, and O have been measured in a selected-ion flow tube (SIFT). H atoms were generated through a microwave discharge on a H2/He mixture, whereas O atoms were created via N atoms titrated with NO, where the N had been created by a microwave discharge on N2. None of the ions reacted with H2, N2 or NO; thus, the rate constants are <1 x 10(-12) cm3 s-1. SOxFy- ions react with H by only fluorine-atom abstraction to form HF at 298 and 500 K. Successive F-atom removal does not occur at either temperature, and the rate constants show no temperature dependence over this limited range. SO2- and F- undergo associative detachment with H to form a neutral molecule and an electron. Theoretical calculations of the structures and energetics of HSO2- isomers were performed and showed that structural differences between the ionic and neutral HSO2 species can account for at least part of the reactivity limitations in the SO2- + H reaction. All of the SOxFy- ions react with O; however, only SO2- reacts with both N and O. SOxFy- reactions with N (SO2- excluded) have a rate constant limit of <1 x 10(-11) cm3 s-1. The rate constants for the SOxFy- reactions with H and O are < or =25% of the collision rate constant, as seen previously in the reactions of these ions with O3, consistent with a kinetic bottleneck limiting the reactivity. The only exceptions are the reactions of SO2- with N and O, which are much more efficient. Three pathways were observed with O atoms: F-atom exchange in the reactant ion, F- exchange in the reactant ion, and charge transfer to the O atom. No associative detachment was observed in the N- and O-atom reactions.

Absolute Rate Coefficients and Branching Percentages for the Reactions of POxCly- + N (4S3/2) and POxCly- + O (3P) at 298 K in a Selected-Ion Flow Tube Instrument

The absolute rate coefficients and product ion branching percentages at 298 K for the reactions of several POxCly- species with atomic nitrogen (N (4S(3/2))) and atomic oxygen (O (3P)) have been determined in a selected-ion flow tube (SIFT) instrument. POxCly- ions are generated by electron impact on POCl3 in a high-pressure source. O atoms are generated by quantitative titration of N atoms with NO, where N atoms are produced by microwave discharge on N2. The experimental procedure allows for the determination of rate coefficients for the reaction of the reactant ion with N (4S(3/2)) and O (3P) as well as with N2 and NO. None of the ions react with N2 or NO, giving an upper limit to the rate coefficient of <5 x 10(-12) cm3 molecules(-1) s(-1). POCl3- and POCl2- do not react with N atoms, giving an upper limit to the rate coefficient of <1 x 10(-11) cm3 molecules(-1) s(-1). The major product ion for POCl3- and POCl2- reacting with O involves loss of Cl from the reactant ion, accounting for >85% of the products. PO2- is a minor product (<or=4%) from POCl2- + O. Only PO2Cl- reacts with both N and O, directly giving PO2- and PO3- as major products. In addition, calculations of the structures and energies for PO2N, PO2N-, and NCl have been performed at the G3 level of theory to obtain estimates for the energetics of the PO2Cl- reactions. PO2-, PO3-, and PO2Cl2- are all unreactive with both N and O. Comparisons of the reactivity of POxCly- ions with O atoms are made to previous reactivity studies of these ions. In particular, routes that yield the very stable PO2- and PO3- ions are discussed.

Observation of dihalide elimination upon electron attachment to oxalyl chloride and oxalyl bromide, 300-550 K

Rate coefficients have been measured for electron attachment to oxalyl chloride [ClC(O)C(O)Cl] and oxalyl bromide [BrC(O)C(O)Br] in He gas at 133 Pa pressure over the temperature range of 300-550 K. With oxalyl chloride, the major ion product of attachment is Cl2(-) at all temperatures (66% at 300 K); its importance increases slightly as temperature increases. Two other product ions formed are Cl- (18% at 300 K) and the phosgene anion CCl2O- (16% at 300 K) and appear to arise from a common mechanism. With oxalyl bromide, the Br2(-) channel represents almost half of the ion product of attachment, independent of temperature. Br- accounts for the remainder. For oxalyl chloride, the attachment rate coefficient is small [(1.8 +/- 0.5) x 10(-8) cm3 s(-1) at 300 K], and increases with temperature. The attachment rate coefficient for oxalyl bromide [(1.3 +/- 0.4) x 10(-7) cm3 s(-1) at 300 K] is nearly collisional and increases only slightly with temperature. Stable parent anions C2Cl2O2(-) and C2Br2O2(-) and adduct anions Cl- (C2Cl2O2) and Br- (C2Br3O2) were observed but are not primary attachment products. G2 and G3 theories were applied to determine geometries of products and energetics of the electron attachment and ion-molecule reactions studied. Electron attachment to both oxalyl halide molecules leads to a shorter C-C bond and longer C-Cl bond in the anions formed. Trans and gauche conformers of the neutral and anionic oxalyl halide species have similar energies and are more stable than the cis conformer, which lies 100-200 meV higher in energy. For C2Cl2O2, C2Cl2O2(-), and C2Br2O2(-), the trans conformer is the most stable conformation. The calculations are ambiguous as to the oxalyl bromide geometry (trans or gauche), the result depending on the theoretical method and basis set. The cis conformers for C2Cl2O2 and C2Br2O2 are transition states. In contrast, the cis conformers of the anionic oxalyl halide molecules are stable, lying 131 meV above trans-C2Cl2O2(-) and 179 meV above trans-C2Br2O2(-). Chien et al. [J. Phys. Chem. A 103, 7918 (1999)] and Kim et al. [J. Chem. Phys. 122, 234313 (2005)] found that the potential energy surface for rotation about the C-C bond in C2Cl2O2 is "extremely flat." Our computational data indicate that the analogous torsional surfaces for C2Br2O2, C2Cl2O2(-), and C2Br2O2(-) are similarly flat. The electron affinity of oxalyl chloride, oxalyl bromide, and phosgene were calculated to be 1.91 eV (G3), and 2.00 eV (G2), and 1.17 eV (G3), respectively.