Local hybrid functionals: An assessment for thermochemical kinetics

Exchange-correlation potential built on the derivative discontinuity of electron density

Electronic structures are fully determined by the exchange-correlation (XC) potential. In this work, we develop a new method to construct reliable XC potentials by properly mixing the exact exchange and the local density approximation potentials in real space. The spatially dependent mixing parameter is derived based on the derivative discontinuity of electron density and is first-principle. We derived the equations for solving the mixing parameter and proposed an approximation to simplify these equations. Based on this approximation, this new method gives reasonable predictions for the ionization energies, fundamental gaps, and singlet-triplet energy differences for various molecular systems. The impact of the approximation on the constructed XC potentials is examined, and it is found that the quality of the XC potentials can be further improved by removing the approximation. This work demonstrates that the derivative discontinuity of electron density is a promising constraint for constructing high-quality XC potentials.

Chemically Accurate Singlet-Triplet Gaps of Arylcarbenes from Local Hybrid Density Functionals

Singlet-triplet (ST) gaps are key descriptors of carbenes, because their properties and reactivity are strongly spin-dependent. However, the theoretical prediction of ST gaps is challenging and generally thought to require elaborate correlated wave function methods or double-hybrid density functionals. By evaluating two recent test sets of arylcarbenes (AC12 and AC18), we show that local hybrid functionals based on the "common t" local mixing function (LMF) model achieve mean absolute errors below 1 kcal/mol at a computational cost only slightly higher than that of global hybrid functionals. An analysis of correlation contributions to the ST gaps suggests that the accuracy of the common t-LMF model is mainly due to an improved description of nondynamical correlation which, unlike exchange, is not additive in each spin-channel. Although spin-nonadditivity can be achieved using the local spin polarization alone, using the "common", i.e., spin-unresolved, iso-orbital indicator t for constructing the LMF is found to be critical for consistent accuracy in ST gaps of arylcarbenes. The results support the view of LHs as vehicles to improve the description of nondynamical correlation rather than sophisticated exchange mixing approaches.

Implementation and First Evaluation of Strong-Correlation-Corrected Local Hybrid Functionals for the Calculation of NMR Shieldings and Shifts

Local hybrid functionals containing strong-correlation factors (scLHs) and range-separated local hybrids (RSLHs) have been integrated into an efficient coupled-perturbed Kohn-Sham implementation for the calculation of nuclear shielding constants. Several scLHs and the ωLH22t RSLH have then been evaluated for the first time for the extended NS372 benchmark set of main-group shieldings and shifts and the TM70 benchmark of 3d transition-metal shifts. The effects of the strong-correlation corrections have been analyzed with respect to the spatial distribution of the sc-factors, which locally diminish exact-exchange admixture at certain regions in a molecule. The scLH22t, scLH23t-mBR, and scLH23t-mBR-P functionals, which contain a "damped" strong-correlation factor to retain the excellent performance of the underlying LH20t functional for weakly correlated situations, tend to make smaller corrections to shieldings and shifts than the "undamped" scLH22ta functional. While the latter functional can also deteriorate agreement with the reference data in certain weakly correlated cases, it provides overall better performance, in particular for systems where static correlation is appreciable. This pertains only to a minority of systems in the NS372 main-group test set but to many more systems in the TM70 transition-metal test set, in particular for high-oxidation-state complexes, e.g., Cr(+VI) complexes and other systems with stretched bonds. Another undamped scLH, the simpler LDA-based scLH21ct-SVWN-m, also tends to provide significant improvements in many cases. The differences between the functionals and species can be rationalized on the basis of one-dimensional plots of the strong-correlation factors, augmented by isosurface plots of the fractional orbital density (FOD). Position-dependent exact-exchange admixture is thus shown to provide substantial flexibility in treating response properties like NMR shifts for both weakly and strongly correlated systems.

How well do one-electron self-interaction-correction methods perform for systems with fractional electrons?

Recently developed locally scaled self-interaction correction (LSIC) is a one-electron SIC method that, when used with a ratio of kinetic energy densities (zσ) as iso-orbital indicator, performs remarkably well for both thermochemical properties as well as for barrier heights overcoming the paradoxical behavior of the well-known Perdew-Zunger self-interaction correction (PZSIC) method. In this work, we examine how well the LSIC method performs for the delocalization error. Our results show that both LSIC and PZSIC methods correctly describe the dissociation of H2+ and He2+ but LSIC is overall more accurate than the PZSIC method. Likewise, in the case of the vertical ionization energy of an ensemble of isolated He atoms, the LSIC and PZSIC methods do not exhibit delocalization errors. For the fractional charges, both LSIC and PZSIC significantly reduce the deviation from linearity in the energy vs number of electrons curve, with PZSIC performing superior for C, Ne, and Ar atoms while for Kr they perform similarly. The LSIC performs well at the endpoints (integer occupations) while substantially reducing the deviation. The dissociation of LiF shows both LSIC and PZSIC dissociate into neutral Li and F but only LSIC exhibits charge transfer from Li+ to F- at the expected distance from the experimental data and accurate ab initio data. Overall, both the PZSIC and LSIC methods reduce the delocalization errors substantially.

Revisiting Gauge-Independent Kinetic Energy Densities in Meta-GGAs and Local Hybrid Calculations of Magnetizabilities

In a recent study [J. Chem. Theory Comput. 2021, 17, 1457-1468], some of us examined the accuracy of magnetizabilities calculated with density functionals representing the local density approximation (LDA), generalized gradient approximation (GGA), meta-GGA (mGGA), as well as global hybrid (GH) and range-separated (RS) hybrid functionals by assessment against accurate reference values obtained with coupled-cluster theory with singles, doubles, and perturbative triples [CCSD(T)]. Our study was later extended to local hybrid (LH) functionals by Holzer et al. [J. Chem. Theory Comput. 2021, 17, 2928-2947]; in this work, we examine a larger selection of LH functionals, also including range-separated LH (RSLH) functionals and strong-correlation LH (scLH) functionals. Holzer et al. also studied the importance of the physically correct handling of the magnetic gauge dependence of the kinetic energy density (τ) in mGGA calculations by comparing the Maximoff-Scuseria formulation of τ used in our aforementioned study to the more physical current-density extension derived by Dobson. In this work, we also revisit this comparison with a larger selection of mGGA functionals. We find that the newly tested LH, RSLH, and scLH functionals outperform all of the functionals considered in the previous studies. The various LH functionals afford the seven lowest mean absolute errors while also showing remarkably small standard deviations and mean errors. Most strikingly, the best two functionals are scLHs that also perform remarkably well in cases with significant multiconfigurational character, such as the ozone molecule, which is traditionally excluded from statistical error evaluations due to its large errors with common density functionals.

Toward a correct treatment of core properties with local hybrid functionals

In local hybrid functionals (LHs), a local mixing function (LMF) determines the position-dependent exact-exchange admixture. We report new LHs that focus on an improvement of the LMF in the core region while retaining or partly improving upon the high accuracy in the valence region exhibited by the LH20t functional. The suggested new pt-LMFs are based on a Padé form and modify the previously used ratio between von Weizsäcker and Kohn-Sham local kinetic energies by different powers of the density to enable flexibly improved approximations to the correct high-density and iso-orbital limits relevant for the innermost core region. Using TDDFT calculations for a set of K-shell core excitations of second- and third-period systems including accurate state-of-the-art relativistic orbital corrections, the core part of the LMF is optimized, while the valence part is optimized as previously reported for test sets of atomization energies and reaction barriers (Haasler et al., J Chem Theory Comput 2020, 16, 5645). The LHs are completed by a calibration function that minimizes spurious nondynamical correlation effects caused by the gauge ambiguities of exchange-energy densities, as well as by B95c meta-GGA correlation. The resulting LH23pt functional relates to the previous LH20t functional but specifically improves upon the core region.

Learning from the 4-(dimethylamino)benzonitrile twist: Two-parameter range-separated local hybrid functional with high accuracy for triplet and charge-transfer excitations

The recent ωLH22t range-separated local hybrid (RSLH) is shown to provide outstanding accuracy for the notorious benchmark problem of the two lowest excited-state potential energy curves for the amino group twist in 4-(dimethylamino)benzonitrile (DMABN). However, the design of ωLH22t as a general-purpose functional resulted in less convincing performance for triplet excitations, which is an important advantage of previous LHs. Furthermore, ωLH22t uses 8 empirical parameters to achieve broad accuracy. In this work, the RSLH ωLH23ct-sir is constructed with minimal empiricism by optimizing its local mixing function prefactor and range-separation parameter for only 8 excitation energies. ωLH23ct-sir maintains the excellent performance of ωLH22t for the DMABN twist and charge-transfer benchmarks but significantly improves the errors for triplet excitation energies (0.17 vs 0.24 eV). Additional test calculations for the AE6BH6 thermochemistry test set and large dipole moment and static polarizability test sets confirm that the focus on excitation energies in the optimization of ωLH23ct-sir has not caused any dramatic errors for ground-state properties. Although ωLH23ct-sir cannot replace ωLH22t as a general-purpose functional, it is preferable for problems requiring a universally good description of localized and charge-transfer excitations of both singlet and triplet multiplicity. Current limitations on the application of ωLH23ct-sir and other RSLHs to the study of singlet-triplet gaps of emitters for thermally activated delayed fluorescence are discussed. This work also includes the first systematic analysis of the influence of the local mixing function prefactor and the range-separation parameter in an RSLH on different types of excitations.

Self-consistent implementation of locally scaled self-interaction-correction method

Recently proposed local self-interaction correction (LSIC) method [Zope et al., J. Chem. Phys. 151, 214108 (2019)] is a one-electron self-interaction-correction (SIC) method that uses an iso-orbital indicator to apply the SIC at each point in space by scaling the exchange-correlation and Coulomb energy densities. The LSIC method is exact for the one-electron densities, also recovers the uniform electron gas limit of the uncorrected density functional approximation, and reduces to the well-known Perdew-Zunger SIC (PZSIC) method as a special case. This article presents the self-consistent implementation of the LSIC method using the ratio of Weizsäcker and Kohn-Sham kinetic energy densities as an iso-orbital indicator. The atomic forces as well as the forces on the Fermi-Löwdin orbitals are also implemented for the LSIC energy functional. Results show that LSIC with the simplest local spin density functional predicts atomization energies of the AE6 dataset better than some of the most widely used generalized-gradient-approximation (GGA) functional [e.g., Perdew-Burke-Ernzerhof (PBE)] and barrier heights of the BH6 database better than some of the most widely used hybrid functionals (e.g., PBE0 and B3LYP). The LSIC method [a mean absolute error (MAE) of 0.008 Å] predicts bond lengths of a small set of molecules better than the PZSIC-LSDA (MAE 0.042 Å) and LSDA (0.011 Å). This work shows that accurate results can be obtained from the simplest density functional by removing the self-interaction-errors using an appropriately designed SIC method.

Full Implementation, Optimization, and Evaluation of a Range-Separated Local Hybrid Functional with Wide Accuracy for Ground and Excited States

We report the first full and efficient implementation of range-separated local hybrid functionals (RSLHs) into the TURBOMOLE program package. This enables the computation of ground-state energies and nuclear gradients as well as excitation energies. Regarding the computational effort, RSLHs scale like regular local hybrid functionals (LHs) with system or basis set size and increase timings by a factor of 2-3 in total. An advanced RSLH, ωLH22t, has been optimized for atomization energies and reaction barriers. It is an extension of the recent LH20t local hybrid and is based on short-range PBE and long-range HF exchange-energy densities, a pig2 calibration function to deal with the gauge ambiguity of exchange-energy densities, and reoptimized B95c correlation. ωLH22t has been evaluated for a wide range of ground-state and excited-state quantities. It further improves upon the already successful LH20t functional for the GMTKN55 main-group energetics test suite, and it outperforms any global hybrid while performing close to the top rung-4 functional, ωB97M-V, for these evaluations when augmented by D4 dispersion corrections. ωLH22t performs excellently for transition-metal reactivity and provides good balance between delocalization errors and left-right correlation for mixed-valence systems, with a somewhat larger bias toward localized states compared to LH20t. It approaches the accuracy of the best local hybrids to date for core, valence singlet and triplet, and Rydberg excitation energies while improving strikingly on intra- and intermolecular charge-transfer excitations, comparable to the most successful range-separated hybrids available.

Spin-State Splittings in 3d Transition-Metal Complexes Revisited: Benchmarking Approximate Methods for Adiabatic Spin-State Energy Differences in Fe(II) Complexes

The CASPT2+δMRCI composite approach reported in a companion paper has been extended and used to provide high-quality reference data for a series of adiabatic spin gaps (defined as ΔE = E_quintet - E_singlet) of [Fe^IIL₆]²⁺ complexes (L = CNH, CO, NCH, NH₃, H₂O), either at nonrelativistic level or including scalar relativistic effects. These highly accurate data have been used to evaluate the performance of various more approximate methods. Coupled-cluster theory with singles, doubles, and perturbative triples, CCSD(T), is found to agree well with the new reference data for Werner-type complexes but exhibits larger underestimates by up to 70 kJ/mol for the π-acceptor ligands, due to appreciable static correlation in the low-spin states of these systems. Widely used domain-based local CCSD(T) calculations, DLPNO-CCSD(T), are shown to depend very sensitively on the cutoff values used to construct the localized domains, and standard values are not sufficient. A large number of density functional approximations have been evaluated against the new reference data. The B2PLYP double hybrid gives the smallest deviations, but several functionals from different rungs of the usual ladder hierarchy give mean absolute deviations below 20 kJ/mol. This includes the B97-D semilocal functional, the PBE0* global hybrid with 15% exact-exchange admixture, as well as the local hybrids LH07s-SVWN and LH07t-SVWN. Several further functionals achieve mean absolute errors below 30 kJ/mol (M06L-D4, SSB-D, B97-1-D4, LC-ωPBE-D4, LH12ct-SsirPW92-D4, LH12ct-SsifPW92-D4, LH14t-calPBE-D4, LHJ-HFcal-D4, and several further double hybrids) and thereby also still overall outperform CCSD(T) or uncorrected CASPT2. While exact-exchange admixture is a crucial factor in favoring high-spin states, the present evaluations confirm that other aspects can be important as well. A number of the better-performing functionals underestimate the spin gaps for the π-acceptor ligands but overestimate them for L = NH₃, H₂O. In contrast to a previous suggestion, non-self-consistent density functional theory (DFT) computations on top of Hartree-Fock orbitals are not a promising path to produce accurate spin gaps in such complexes.

Local Hybrid Functional Applicable to Weakly and Strongly Correlated Systems

The recent idea (Wodyński, A.; Arbuznikov, A. V.; Kaupp M. J. Chem. Phys. 2021, 155, 144101) to augment local hybrid functionals by a strong-correlation (sc) factor obtained from the adiabatic connection in the spirit of the KP16 model has been extended and applied to generate the accurate sc-corrected local hybrid functional scLH22t. By damping small values of the ratio between nondynamical and dynamical correlation entering the correction factor, it has become possible to avoid double counting of nondynamical correlation for weakly correlated situations and thereby preserve the excellent accuracy of the underlying LH20t local hybrid for such cases almost perfectly. On the other hand, scLH22t improves substantially over LH20t in reducing fractional-spin errors (FSEs), in providing improved spin-restricted bond dissociation curves, and in treating some typical systems with multireference character. The obtained FSEs are similar to those of the KP16/B13 model and slightly larger than for B13, but performance for weakly correlated systems is better than for these two related methods, which are also difficult to use self-consistently. The recent DM21 functional based on the training of a deep neural network still performs somewhat better than scLH22t but allows no physical insights into the origins of reduced FSEs. Examination of local mixing functions (LMFs) for the corrected scLH22t and uncorrected LH20t functionals provides further insights: in weakly correlated situations, the LMF remains essentially unchanged. Strong-correlation effects manifest in a reduction of the LMF values in certain regions of space, even to the extent of producing negative LMF values. It is suggested that this is the mechanism by which also DM21, which may be viewed as a range-separated local hybrid, is able to reduce FSEs.

Systematic Evaluation of Modern Density Functional Methods for the Computation of NMR Shifts of 3d Transition-Metal Nuclei

A wide range of density functionals from all rungs of Jacob's ladder have been evaluated systematically for a set of experimental 3d transition-metal NMR shifts of 70 complexes encompassing 12 × ⁴⁹Ti, 10 × ⁵¹V, 10 × ⁵³Cr, 11 × ⁵⁵Mn, 9 × ⁵⁷Fe, 9 × ⁵⁹Co, and 9 × ⁶¹Ni shift values, as well as a diverse range of electronic structure characteristics. The overall 39 functionals evaluated include one LDA, eight GGAs, seven meta-GGAs (including their current-density-functional─CDFT─versions), nine global hybrids, four range-separated hybrids, eight local hybrids, and two double hybrids, and we also include Hartree-Fock and MP2 calculations. While recent evaluations of the same functionals for a very large coupled-cluster-based benchmark of main-group shieldings and shifts achieved in some cases aggregate percentage mean absolute errors clearly below 2%, the best results for the present 3d-nuclei set are in the range between 4 and 5%. Strikingly, the overall best-performing functionals are the recently implemented CDFT versions of two meta-GGAs, namely cM06-L (4.0%) and cVSXC (4.3%), followed by cLH14t-calPBE (4.9%), B3LYP (5.0%), and cLH07t-SVWN (5.1%), i.e., the previously best-performing global hybrid and two local hybrids. A number of further functionals achieve aggregate deviations in the range 5-6%. Range-separated hybrids offer no particular advantage over global hybrids. Due to the overall poor performance of Hartree-Fock theory for all systems except the titanium complexes, MP2 and double-hybrid functionals are unsuitable for these 3d-nucleus shifts and provide large errors. Global hybrid functionals with larger EXX admixtures, such as BHLYP or M06-2X, also perform poorly, and some other highly parametrized global hybrids also are unsuitable. For many functionals depending on local kinetic energy τ, their CDFT variants perform much better than their "non-CDFT" versions. This holds notably also for the above-mentioned M06-L and VSXC, while the effect is small for τ-dependent local hybrids and can even be somewhat detrimental to the agreement with experiment for a few other cases. The separation between well-performing and more poorly performing functionals is mainly determined by their results for the most critical nuclei ⁵⁵Mn, ⁵⁷Fe, and ⁵⁹Co. Here either moderate exact-exchange admixtures or CDFT versions of meta-GGAs are beneficial for the accuracy. The overall deviations of the better-performing global or local hybrids are then typically dominated by the ⁵³Cr shifts, where triplet instabilities appear to disfavor exact-exchange admixture. Further detailed analyses help to pinpoint specific nuclei and specific types of complexes that are challenges for a given functional.

Extended Benchmark Set of Main-Group Nuclear Shielding Constants and NMR Chemical Shifts and Its Use to Evaluate Modern DFT Methods

An extended theoretical benchmark set, NS372, for light main-group nuclear shieldings and NMR shifts has been constructed based on high-level GIAO-CCSD(T)/pcSseg-3//CCSD(T)/cc-pVQZ reference data. After removal of the large static-correlation cases O₃, F₃^-, and BH from the statistical evaluations for the ¹⁷O, ¹⁹F, and ¹¹B subsets, the benchmark comprises overall 372 shielding values in 117 molecules with a wide range of electronic-structure situations, containing 124 ¹H, 14 ¹¹B, 93 ¹³C, 43 ¹⁵N, 31 ¹⁷O, 47 ¹⁹F, 14 ³¹P, and 6 ³³S shielding constants. The CCSD(T)/pcSseg-3 data are shown to be close to the basis-set and method limit and thus provide an excellent benchmark to evaluate more approximate methods, such as density functional approaches. This dataset has been used to evaluate Hartree-Fock (HF) and MP2, and a wide range of exchange-correlation functionals from local density approximation (LDA) to generalized gradient approximations (GGAs) and meta-GGAs (focusing on their current-density functional implementations), as well as global hybrid, range-separated hybrid, local hybrid, and double-hybrid functionals. Starting with absolute shielding constants, the DSD-PBEP86 double hybrid is confirmed to provide the highest accuracy, with an aggregate relative mean absolute error (rel. MAE) of only 0.9%, followed by MP2 (1.1%). MP2 and double hybrids only show larger errors for a few systems with the largest static-correlation effects. The double-hybrid B2GP-PLYP, the two local hybrids cLH12ct-SsirPW92 and cLH12ct-SsifPW92, and the current-density functional meta-GGA cB97M-V follow closely behind (all 1.5%), as do some further functionals, cLH20t and cMN15-L (both 1.6%), as well as B2PLYP and KT3 (both 2.0%). Functionals on the lower rungs of the usual ladder offer the advantage of lower computational cost and access to larger molecules. Closer examination also reveals the best-performing methods for individual nuclei in the test set. Different ways of treating τ-dependent functionals are evaluated. When moving from absolute shielding constants to chemical shifts, some of the methods can benefit from systematic error compensation, and the overall error range somewhat narrows. Further methods now achieve the 2% threshold of relative MAEs, including functionals based on TPSS (TPSSh, cmPSTS).

Local hybrid functionals augmented by a strong-correlation model

The strong-correlation factor of the recent KP16/B13 exchange-correlation functional has been adapted and applied to the framework of local hybrid (LH) functionals. The expression identifiable as nondynamical (NDC) and dynamical (DC) correlations in LHs is modified by inserting a position-dependent KP16/B13-style strong-correlation factor q_AC(r) based on a local version of the adiabatic connection. Different ways of deriving this factor are evaluated for a simple one-parameter LH based on the local density approximation. While the direct derivation from the LH NDC term fails due to known deficiencies, hybrid approaches, where the factor is determined from the B13 NDC term as in KP16/B13 itself, provide remarkable improvements. In particular, a modified B13 NDC expression using Patra's exchange-hole curvature showed promising results. When applied to the simple LH as a first attempt, it reduces atomic fractional-spin errors and deficiencies of spin-restricted bond dissociation curves to a similar extent as the KP16/B13 functional itself while maintaining the good accuracy of the underlying LH for atomization energies and reaction barriers in weakly correlated situations. The performance of different NDC expressions in deriving strong-correlation corrections is analyzed, and areas for further improvements of strong-correlation corrected LHs and related approaches are identified. All the approaches evaluated in this work have been implemented self-consistently into a developers' version of the Turbomole program.

Implementation and Validation of Local Hybrid Functionals with Calibrated Exchange-Energy Densities for Nuclear Shielding Constants

A recently reported coupled-perturbed Kohn-Sham implementation to compute nuclear shielding constants with gauge-including atomic orbitals and local hybrid functionals has been extended to cover higher derivatives of the density in the local mixing function (LMF) of the local hybrid as well as the calibration function (CF) needed to deal with the ambiguity of exchange-energy densities. This allowed the first evaluation of state-of-the-art local hybrids with "calibrated" exchange-energy densities for nuclear shieldings. Compared to previously evaluated simpler local hybrids without a CF, appreciable improvements are found for proton shieldings. Furthermore, the recent LH20t functional is still competitive with the outstanding performance of the uncalibrated LH12ct-SsirSVWN and LH12ct-SsifSVWN LHs for heavier nuclei, suggesting that LH20t is possibly the most robust choice of any rung-four functional for computing the nuclear shieldings of main-group nuclei so far. Interestingly, the presence of a CF in the functional significantly reduces the number of artifacts introduced by the widely used Maximoff-Scuseria framework to treat the local kinetic energy τ. The latter occurs in so-called t-LMFs used in many of the present local hybrids. In any case, the use of Dobson's current-density functional framework is also recommended with more advanced calibrated τ-dependent local hybrid functionals.

Noncollinear Relativistic Two-Component X2C Calculations of Hyperfine Couplings Using Local Hybrid Functionals. Importance of the High-Density Coordinate Scaling Limit

Local hybrid functionals with position-dependent exact-exchange admixture have been implemented in the noncollinear spin form into a two-component X2C code and are evaluated for the hyperfine coupling tensors of a series of 3d, 4d, and 5d transition-metal complexes. One aim is to see if the potential of local hybrid functionals toward an improved balance between core-shell and valence-shell spin polarization, recently identified in nonrelativistic computations on 3d complexes (Schattenberg, C.; Maier, T. M.; Kaupp, M. J. Chem. Theory Comput. 2018, 14, 5653-5672), can be extended to the hyperfine couplings of heavier metal centers. The correctness of the two-component implementation is first established by comparison to previous computations for 3d systems with or without notable spin-orbit contributions to their hyperfine tensors, and the good performance of a standard "t-LMF" local mixing function is confirmed. However, when moving to 4d and 5d metal centers, the performance of such local mixing functions deteriorates. This is likely due to their violation of the homogeneous coordinate scaling condition in the high-density limit, which is particularly important for the core shells of heavier atoms. A local mixing function that respects this high-density limit performs notably better for heavier metal centers. However, it brings in much too high exact-exchange admixtures for the 3d systems and is too inflexible to simultaneously provide reasonable chemical accuracy in other areas. These results point to the ongoing need to develop improved local mixing functions and local hybrid functionals that exhibit favorable properties in different areas of space defined by very high and much lower electron densities.

Combining Wave Function Methods with Density Functional Theory for Excited States

We review state-of-the-art electronic structure methods based both on wave function theory (WFT) and density functional theory (DFT). Strengths and limitations of both the wave function and density functional based approaches are discussed, and modern attempts to combine these two methods are presented. The challenges in modeling excited-state chemistry using both single-reference and multireference methods are described. Topics covered include background, combining density functional theory with single-configuration wave function theory, generalized Kohn-Sham (KS) theory, global hybrids, range-separated hybrids, local hybrids, using KS orbitals in many-body theory (including calculations of the self-energy and the GW approximation), Bethe-Salpeter equation, algorithms to accelerate GW calculations, combining DFT with multiconfigurational WFT, orbital-dependent correlation functionals based on multiconfigurational WFT, building multiconfigurational wave functions from KS configurations, adding correlation functionals to multiconfiguration self-consistent-field (MCSCF) energies, combining DFT with configuration-interaction singles by means of time-dependent DFT, using range separation to combine DFT with MCSCF, embedding multiconfigurational WFT in DFT, and multiconfiguration pair-density functional theory.

[Al2O4](-), a Benchmark Gas-Phase Class II Mixed-Valence Radical Anion for the Evaluation of Quantum-Chemical Methods

The radical anion [Al2O4](-) has been identified as a rare example of a small gas-phase mixed-valence system with partially localized, weakly coupled class II character in the Robin/Day classification. It exhibits a low-lying C2v minimum with one terminal oxyl radical ligand and a high-lying D2h minimum at about 70 kJ/mol relative energy with predominantly bridge-localized-hole character. Two identical C2v minima and the D2h minimum are connected by two C2v-symmetrical transition states, which are only ca. 6-10 kJ/mol above the D2h local minimum. The small size of the system and the absence of environmental effects has for the first time enabled the computation of accurate ab initio benchmark energies, at the CCSDT(Q)/CBS level using W3-F12 theory, for a class-II mixed-valence system. These energies have been used to evaluate wave function-based methods [CCSD(T), CCSD, SCS-MP2, MP2, UHF] and density functionals ranging from semilocal (e.g., BLYP, PBE, M06L, M11L, N12) via global hybrids (B3LYP, PBE0, BLYP35, BMK, M06, M062X, M06HF, PW6B95) and range-separated hybrids (CAM-B3LYP, ωB97, ωB97X-D, LC-BLYP, LC-ωPBE, M11, N12SX), the B2PLYP double hybrid, and some local hybrid functionals. Global hybrids with about 35-43% exact-exchange (EXX) admixture (e.g., BLYP35, BMK), several range hybrids (CAM-B3LYP, ωB97X-D, ω-B97), and a local hybrid provide good to excellent agreement with benchmark energetics. In contrast, too low EXX admixture leads to an incorrect delocalized class III picture, while too large EXX overlocalizes and gives too large energy differences. These results provide support for previous method choices for mixed-valence systems in solution and for the treatment of oxyl defect sites in alumosilicates and SiO2. Vibrational gas-phase spectra at various computational levels have been compared directly to experiment and to CCSD(T)/aug-cc-pV(T+d)Z data.

New approaches for the calibration of exchange-energy densities in local hybrid functionals

A new derivation of semi-local calibration functions is proposed, to ameliorate the gauge problem of exchange-energy densities in local hybrid functionals.

Assessment of a Middle-Range Hybrid Functional

While hybrid functionals are largely responsible for the utility of modern Kohn-Sham density functional theory, they are not without their weaknesses. In the solid state, the slow decay of their nonlocal Hartree-Fock-type exchange makes hybrids computationally demanding and can introduce unphysical effects. Both problems can be remedied by a screened hybrid which uses exact exchange only at short-range. Many molecular properties, in contrast, benefit from the inclusion of long-range exact exchange. Recently, the authors reconciled these two seemingly contradictory requirements by introducing the HISS functional [ J. Chem. Phys. 2007 , 127 , 221103 ], which uses exact exchange only in the middle range. In this paper, we expand upon our previous work, benchmarking the performance of the HISS functional for several simple properties and applying it to the dissociation of homonuclear diatomic cations and to the polarizability of linear H2 chains to determine the importance of middle-range exact exchange for these systems, which are expected to be sensitive to the asymptotic exchange potential.

Exploring the Limit of Accuracy of the Global Hybrid Meta Density Functional for Main-Group Thermochemistry, Kinetics, and Noncovalent Interactions

The hybrid meta density functionals M05-2X and M06-2X have been shown to provide broad accuracy for main group chemistry. In the present article we make the functional form more flexible and improve the self-interaction term in the correlation functional to improve its self-consistent-field convergence. We also explore the constraint of enforcing the exact forms of the exchange and correlation functionals through second order (SO) in the reduced density gradient. This yields two new functionals called M08-HX and M08-SO, with different exact constraints. The new functionals are optimized against 267 diverse main-group energetic data consisting of atomization energies, ionization potentials, electron affinities, proton affinities, dissociation energies, isomerization energies, barrier heights, noncovalent complexation energies, and atomic energies. Then the M08-HX, M08-SO, M05-2X, and M06-2X functionals and the popular B3LYP functional are tested against 250 data that were not part of the original training data for any of the functionals, in particular 164 main-group energetic data in 7 databases, 39 bond lengths, 38 vibrational frequencies, and 9 multiplicity-changing electronic transition energies. These tests include a variety of new challenges for complex systems, including large-molecule atomization energies, organic isomerization energies, interaction energies in uracil trimers, and bond distances in crowded molecules (in particular, cyclophanes). The M08-HX functional performs slightly better than M08-SO and M06-2X on average, significantly better than M05-2X, and much better than B3LYP for a combination of main-group thermochemistry, kinetics, noncovalent interactions, and electronic spectroscopy. More important than the slight improvement in accuracy afforded by M08-HX is the conformation that the optimization procedure works well for data outside the training set. Problems for which the accuracy is especially improved by the new M08-HX functional include large-molecule atomization energies, noncovalent interaction energies, conformational energies in aromatic peptides, barrier heights, multiplicity-changing excitation energies, and bond lengths in crowded molecules.

Coupled-Perturbed Scheme for the Calculation of Electronic g-Tensors with Local Hybrid Functionals

A coupled-perturbed Kohn-Sham (CPKS) scheme for calculating second-order magnetic properties has been developed for the case of general occupied-orbital-dependent (OOD) exchange-correlation functionals involving the exact-exchange energy density. The origin of the coupling terms in the functional derivatives of OOD functionals with respect to the orbitals has been thoroughly analyzed, and general expressions for the resulting coupling terms have been obtained. The generalized CPKS scheme thus obtained has been implemented within the MAG-ReSpect code and tested in calculations of electronic g-tensors with local hybrid functionals. Compared to previously tested global hybrids, like B3LYP, thermochemically optimized local hybrids provide only little to moderate improvement for test sets of main-group radicals and paramagnetic transition-metal complexes. Closer analyses point to possible areas in which the fundamentally more flexible local hybrids may be improved for the property at hand.

Construction of exchange-correlation functionals through interpolation between the non-interacting and the strong-correlation limit

Drawing on the adiabatic connection of density functional theory, exchange-correlation functionals of Kohn-Sham density functional theory are constructed which interpolate between the extreme limits of the electron-electron interaction strength. The first limit is the non-interacting one, where there is only exchange. The second limit is the strong correlated one, characterized as the minimum of the electron-electron repulsion energy. The exchange-correlation energy in the strong-correlation limit is approximated through a model for the exchange-correlation hole that is referred to as nonlocal-radius model [L. O. Wagner and P. Gori-Giorgi, Phys. Rev. A 90, 052512 (2014)]. Using the non-interacting and strong-correlated extremes, various interpolation schemes are presented that yield new approximations to the adiabatic connection and thus to the exchange-correlation energy. Some of them rely on empiricism while others do not. Several of the proposed approximations yield the exact exchange-correlation energy for one-electron systems where local and semi-local approximations often fail badly. Other proposed approximations generalize existing global hybrids by using a fraction of the exchange-correlation energy in the strong-correlation limit to replace an equal fraction of the semi-local approximation to the exchange-correlation energy in the strong-correlation limit. The performance of the proposed approximations is evaluated for molecular atomization energies, total atomic energies, and ionization potentials.

Quantum-chemical insights into mixed-valence systems: within and beyond the Robin–Day scheme

The application of quantum-chemical methods to both organic and transition-metal mixed-valence systems is reviewed, with particular emphasis on how to describe correctly delocalisation vs. localisation near the borderline between Robin–Day classes II and III.