Binding characteristics of pyridine on Ag(110)

Orientation-specific switching of inelastic electron tunneling in an oxygen-pyridine complex adsorbed onto an Ag(110) surface

Here, we report the development of a molecular rotary switch (a "stator-rotor" consisting of a single oxygen molecule as a stator and a single pyridine molecule as a rotor) on a silver surface. The pyridine molecule was bonded to the oxygen molecule and was found to rotate to enable "ON" or "OFF" vibrational conductance through the oxygen molecule. Four stable sites around the oxygen molecule were observed, and vibration conductance turned on and off depending on the site at which the pyridine molecule bonded. The spatially resolved mapping of the vibrational change revealed two locations of maximal vibration intensity, separated by ∼3 Å. These positions acted as two conducting channels. The two distinct vibrational energy levels were associated with the switching process. Adsorption-induced electron transfer between the silver layers and the molecules enhanced the local interactions between the molecules. The two vibration modes were excited by resonant tunneling despite substantial interactions between the molecules, which resulted in a decrease in tunneling conductance. An independent pathway exists for the vibrational excitation process by tunneling electrons and intermolecular interactions.

Competing adsorption mechanisms of pyridine on Cu, Ag, Au, and Pt(110) surfaces

We explore the adsorption of pyridine on Cu, Ag, Au, and Pt(110) surfaces using density functional theory. To account for the van der Waals interaction, we use the optB86b-vdW, optB88-vdW, optPBE-vdW, revPBE-vdW, and rPW86-vdW2 functionals. For comparison, we also run calculations using the generalized gradient approximation-PBE (Perdew-Burke-Ernzerhof) functional. We find the most stable adsorption site to depend on both metal and functional, with two energetically favorable adsorption sites, namely, a vertically oriented site and a flat pyridine site. We calculate that every functional predicts pyridine to lie in the vertical configuration on the coinage metals at a low coverage. On Pt(110), by contrast, we calculate all the functionals-except rPW86-vdW2-to predict pyridine to lie flat at a low coverage. By analyzing these differences for these adsorption configurations, along with various geometric and electronic properties of the adsorbate/substrate system, we access in detail the performance of the 6 functionals we use. We also characterize the nature of the bonding of pyridine on the coinage metals from weak to strong physisorption, depending on the functional used. On Pt(110), we characterize the nature of the bonding of pyridine as ranging from strong physisorption to strong chemisorption depending again on the functional used, illustrating both the importance of the van der Waals interaction to this system and that this system can make a stringent test for computational methods.

Direct observation of the conformational transitions of single pyridine molecules on a Ag(110) surface induced by long-range repulsive intermolecular interactions

The transition between two conformations of pyridine molecules adsorbed on a Ag(110) surface at 13 K was investigated by performing single-molecule manipulation at a very low coverage and the track-imaging of pyridines for various surface coverages using a variable low-temperature scanning tunneling microscope. A single tilted conformer was converted to an upright conformer when another coadsorbed tilted pyridine molecule approached to within ∼2 nm. The conversion probability depends on the molecular separation. The tilted conformers that are prevalent at a very low coverage were converted to upright conformers with an increasing surface coverage. The minimum molecular separation before this transition is induced was determined to be 2.2 nm using molecular track-imaging and statistical analysis of the pyridine separation as a function of the molecular coverage. The conformation transition was attributed to substrate-mediated long-range repulsive interactions between the pyridine molecules, which are produced by charge redistribution that occurs upon pyridine adsorption on the silver surface.

Controlling the formation process and atomic structures of single pyrazine molecular junction by tuning the strength of the metal–molecule interaction

Fabrication of single pyrazine molecular junction with Au, Ag and Cu electrodes using mechanically controllable break junction technique in ultra-high vacuum.

How adsorbate alignment leads to selective reaction

There has been much interest in the effect of adsorbate alignment in a surface reaction. Here we show its significance for an electron-induced reaction occurring along preferred axes of the asymmetric Cu(110) surface, characterized by directional copper rows. By scanning tunneling microscopy (STM), we found that the heterocyclic aromatic reagent, physisorbed meta-iodopyridine, lay with its carbon-iodine either along the rows of Cu(110), "A", or perpendicular, "P". Electron-induced dissociative attachment with the C-I bond initially along "A" gave a chemisorbed I atom and chemisorbed vertical pyridyl, singly surface-bound, whereas that with C-I along "P" gave a chemisorbed I atom and a horizontal pyridyl, doubly bound. An impulsive two-state model, involving a short-lived antibonding state of C-I, accounted for the different product surface binding in terms of closer Cu···Cu atomic spacing along "A" accommodating only one binding site of the pyridyl ring recoiling from I and wider spacing along "P" accommodating simultaneously both binding sites, N-Cu and C-Cu, in the meta-position on the recoiling pyridyl ring. STM studies combined with dynamical modeling can be seen as a way to improve understanding of the role of surface alignment in determining reactive outcomes in induced reaction at asymmetric crystalline surfaces.

Synergistic photocatalytic degradation of pyridine using precious metal supported TiO2 with KBrO3

A series of precious metals catalysts (M/TiO2, M = Ru, Rh, Pd, Ag, Ir, Pt or Au) were prepared by a light deposition method and the synergistic photocatalytic degradations of pyridine (20 mg/L) under UV irradiation (365 nm) using M/TiO2 with electron capture agent KBrO3 have been investigated. The results show that KBrO3 has a greatly synergistic role on M/TiO2 and the photocatalytic activity of M/TiO2 is closely related to its work function. Ag could greatly enhance the activity of TiO2 due to the binding characteristics of pyridine on Ag. Under the conditions of 0.5 wt.% Ag loading, Ag/TiO2 concentration of 0.1 g/L, KBrO3 concentration of 10 mmol/L and reaction liquid pH value at 9, the pyridine can be degraded by 64% within 3 hr, doubled than TiO2 photocatalytic system. The degradation kinetics of pyridine follows first-order kinetics and k = 5.53 x 10(-3) min-1.

Effect of geometrical orientation on the charge-transfer energetics of supramolecular (tetraphenyl)-porphyrin∕C60 dyads

The charge transfer (CT) excited state energies of donor-acceptor (D∕A) pairs determine the achievable open-circuit voltage of D∕A-based organic solar cell devices. Changes in the relative orientation of donor-acceptor pairs at the interface influence the frontier orbital energy levels, which impacts the dissociation of bound excitons at the D∕A-interface. We examine the effect of relative orientation on CT excited state energies of porphyrin-fullerene dyads. The donors studied are base- and Zn-tetraphenyl porphyrin coupled to C60 as the acceptor molecule in an end-on configuration. We compare the energetics of a few low-lying CT states for the end-on geometry to our previously calculated CT energetics of a co-facial orientation. The calculated CT excitation energies are larger for the end-on orientation in comparison to the co-facial structure by about 0.7 eV, which primarily occurs due to a decrease in exciton binding energy in going from the co-facial to the end-on orientation. Furthermore, changes in relative donor-acceptor orientation have a larger impact on the CT energies than changes in donor-acceptor distance.