Solving the structure of reaction intermediates by time-resolved synchrotron x-ray absorption spectroscopy

Tuning metal-support interactions in nickel-zeolite catalysts leads to enhanced stability during dry reforming of methane

Ni-based catalysts are highly reactive for dry reforming of methane (DRM) but they are prone to rapid deactivation due to sintering and/or coking. In this study, we present a straightforward approach for anchoring dispersed Ni sites with strengthened metal-support interactions, which leads to Ni active sites embedded in dealuminated Beta zeolite with superior stability and rates for DRM. The process involves solid-state grinding of dealuminated Beta zeolites and nickel nitrate, followed by calcination under finely controlled gas flow conditions. By combining in situ X-ray absorption spectroscopy and ab initio simulations, it is elucidated that the efficient removal of byproducts during catalyst synthesis is conducted to strengthen Ni-Si interactions that suppress coking and sintering after 100 h of time-on-stream. Transient isotopic kinetic experiments shed light on the differences in intrinsic turnover frequency of Ni species and explain performance trends. This work constructs a fundamental understanding regarding the implication of facile synthesis protocols on metal-support interaction in zeolite-supported Ni sites, and it lays the needed foundations on how these interactions can be tuned for outstanding DRM performance.

Restructuring dynamics of surface species in bimetallic nanoparticles probed by modulation excitation spectroscopy

Restructuring of metal components on bimetallic nanoparticle surfaces in response to the changes in reactive environment is a ubiquitous phenomenon whose potential for the design of tunable catalysts is underexplored. The main challenge is the lack of knowledge of the structure, composition, and evolution of species on the nanoparticle surfaces during reaction. We apply a modulation excitation approach to the X-ray absorption spectroscopy of the 30 atomic % Pd in Au supported nanocatalysts via the gas (H2 and O2) concentration modulation. For interpreting restructuring kinetics, we correlate the phase-sensitive detection with the time-domain analysis aided by a denoising algorithm. Here we show that the surface and near-surface species such as Pd oxides and atomically dispersed Pd restructured periodically, featuring different time delays. We propose a model that Pd oxide formation is preceded by the build-up of Pd regions caused by oxygen-driven segregation of Pd atoms towards the surface. During the H2 pulse, rapid reduction and dissolution of Pd follows an induction period which we attribute to H2 dissociation. Periodic perturbations of nanocatalysts by gases can, therefore, enable variations in the stoichiometry of the surface and near-surface oxides and dynamically tune the degree of oxidation/reduction of metals at/near the catalyst surface.

Biomimetic Control over Bimetallic Nanoparticle Structure and Activity via Peptide Capping Ligand Sequence

The controlled design of bimetallic nanoparticles (BNPs) is a key goal in tailoring their catalytic properties. Recently, biomimetic pathways demonstrated potent control over the distribution of different metals within BNPs, but a direct understanding of the peptide effect on the compositional distribution at the interparticle and intraparticle levels remains lacking. We synthesized two sets of PtAu systems with two peptides and correlated their structure, composition, and distributions with the catalytic activity. Structural and compositional analyses were performed by a combined machine learning-assisted refinement of X-ray absorption spectra and Z-contrast measurements by scanning transmission electron microscopy. The difference in the catalytic activities between nanoparticles synthesized with different peptides was attributed to the details of interparticle distribution of Pt and Au across these markedly heterogeneous systems, comprising Pt-rich, Au-rich, and Au core/Pt shell nanoparticles. The total amount of Pt in the shells of the BNPs was proposed to be the key catalytic activity descriptor. This approach can be extended to other systems of metals and peptides to facilitate the targeted design of catalysts with the desired activity.

Probing Active Sites in CuxPdy Cluster Catalysts by Machine-Learning-Assisted X-ray Absorption Spectroscopy

Size-selected clusters are important model catalysts because of their narrow size and compositional distributions, as well as enhanced activity and selectivity in many reactions. Still, their structure-activity relationships are, in general, elusive. The main reason is the difficulty in identifying and quantitatively characterizing the catalytic active site in the clusters when it is confined within subnanometric dimensions and under the continuous structural changes the clusters can undergo in reaction conditions. Using machine learning approaches for analysis of the operando X-ray absorption near-edge structure spectra, we obtained accurate speciation of the Cu_xPd_y cluster types during the propane oxidation reaction and the structural information about each type. As a result, we elucidated the information about active species and relative roles of Cu and Pd in the clusters.

Insight into the charging-discharging of magnetite electrodes: in situ XAS and DFT study

The structural changes of Fe3O4 nanoparticle electrodes in Li ion batteries during charging-discharging cycles have been investigated using in situ X-ray absorption spectroscopy (XAS). Chemometric methods viz., Principal Component Analysis (PCA) and Multivariate Curve Resolution-Alternate Least Square (MCR-ALS) have been used for analysis of the in situ XANES data during the charge-discharge cycle, which help to identify the various species formed during the lithiation-delithiation of Fe3O4. The concentration variation of the different species has also been determined and the detailed intercalation-conversion mechanism of the Fe3O4 electrodes during the first discharge has been established. Subsequently, the first charge and second discharge cycles were also studied to apprehend the difference in redox reaction between the first discharge and subsequent cycles. The above studies clearly identify the four species involved in the whole intercalation-conversion process of Fe3O4 electrode of a Li ion battery and also indicate the irreversibility of the conversion reaction in subsequent cycles which may be one of the reasons for capacity fading of these electrodes. The above results have also been corroborated with density functional theory (DFT)based ab inito calculations.

Direct structural and mechanistic insights into fast bimolecular chemical reactions in solution through a coupled XAS/UV–Vis multivariate statistical analysis

A combined multivariate and theoretical analysis of coupled XAS/UV–Vis data was proven to be an innovative method to obtain direct structural and mechanistic evidence for bimolecular reactions in solution involving organic substrates.

An Innovative Lithium Ion Battery System Based on a Cu2S Anode Material

Cu₂S is considered as one of the potential anode paradigms for advanced rechargeable batteries because of its high theoretical capacity (∼335 mAh·g^-1), high and flat charge/discharge voltage plateaus (∼1.7 V vs Li⁺/Li), stable cycling performance, and its elemental abundance. However, many studies have shown that Cu₂S exhibits a dramatic capacity fade in carbonate-based electrolytes, which has precluded its commercialization when paired with high voltage cathodes in state-of-the-art lithium ion batteries. Here, we report on a fundamental mechanistic study of the electrochemical processes of Cu₂S in both ether- and carbonate-based electrolytes employing operando synchrotron X-ray methods. Based on our findings, we developed a Cu₂S/C composite material that suppresses its failure mechanism in carbonate-based electrolytes and further demonstrated its feasibility in lithium ion full cells for the first time. Our experiment provides the basis for the utilization of Cu₂S in industrial-scale applications for large-scale electrical energy storage.

Reversible Transformation of Pt Nanoparticles into Single Atoms inside High-Silica Chabazite Zeolite

We report the encapsulation of platinum species in highly siliceous chabazite (CHA) crystallized in the presence of N,N,N-trimethyl-1-adamantammonium and a thiol-stabilized Pt complex. When compared to Pt/SiO₂ or Pt-containing Al-rich zeolites, the materials in this work show enhanced stability toward metal sintering in a variety of industrial conditions, including H₂, O₂, and H₂O. Remarkably, temperatures in the range 650-750 °C can be reached without significant sintering of the noble metal. Detailed structural determinations by X-ray absorption spectroscopy and aberration-corrected high-angle annular dark-field scanning transmission electron microscopy demonstrate subtle control of the supported metal structures from ∼1 nm nanoparticles to site-isolated single Pt atoms via reversible interconversion of one species into another in reducing and oxidizing atmospheres. The combined used of microscopy and spectroscopy is critical to understand these surface-mediated transformations. When tested in hydrogenation reactions, Pt/CHA converts ethylene (∼80%) but not propylene under identical conditions, in contrast to Pt/SiO₂, which converts both at similar rates. These differences are attributed to the negligible diffusivity of propylene through the small-pore zeolite and provide final evidence of the metal encapsulation.

Growth of block copolymer stabilized metal nanoparticles probed simultaneously by in situ XAS and UV-Vis spectroscopy

The growth of Au and Pt nanoparticles from their respective chloride precursors using block copolymer-based reducers has been studied by simultaneous in situ measurement of XAS and UV-Vis spectroscopy at the energy-dispersive EXAFS beamline (BL-08) at INDUS-2 SRS at RRCAT, Indore, India. While the XANES spectra of the precursor give real-time information on the reduction process, the EXAFS spectra reveal the structure of the clusters formed at the intermediate stages of growth. The growth kinetics of both types of nanoparticles are found to be almost similar and are found to follow three stages, though the first stage of nucleation takes place earlier in the case of Au than in the case of Pt nanoparticles due to the difference in the reduction potential of the respective precursors. The first two stages of the growth of Au and Pt nanoparticles as obtained by in situ XAS measurements could be corroborated by simultaneous in situ measurement of UV-Vis spectroscopy also.

Optimized Finite Difference Method for the Full-Potential XANES Simulations: Application to Molecular Adsorption Geometries in MOFs and Metal-Ligand Intersystem Crossing Transients

Accurate modeling of the X-ray absorption near-edge spectra (XANES) is required to unravel the local structure of metal sites in complex systems and their structural changes upon chemical or light stimuli. Two relevant examples are reported here concerning the following: (i) the effect of molecular adsorption on 3d metals hosted inside metal-organic frameworks and (ii) light induced dynamics of spin crossover in metal-organic complexes. In both cases, the amount of structural models for simulation can reach a hundred, depending on the number of structural parameters. Thus, the choice of an accurate but computationally demanding finite difference method for the ab initio X-ray absorption simulations severely restricts the range of molecular systems that can be analyzed by personal computers. Employing the FDMNES code [Phys. Rev. B, 2001, 63, 125120] we show that this problem can be handled if a proper diagonalization scheme is applied. Due to the use of dedicated solvers for sparse matrices, the calculation time was reduced by more than 1 order of magnitude compared to the standard Gaussian method, while the amount of required RAM was halved. Ni K-edge XANES simulations performed by the accelerated version of the code allowed analyzing the coordination geometry of CO and NO on the Ni active sites in CPO-27-Ni MOF. The Ni-CO configuration was found to be linear, while Ni-NO was bent by almost 90°. Modeling of the Fe K-edge XANES of photoexcited aqueous [Fe(bpy)3](2+) with a 100 ps delay we identified the Fe-N distance elongation and bipyridine rotation upon transition from the initial low-spin to the final high-spin state. Subsequently, the X-ray absorption spectrum for the intermediate triplet state with expected 100 fs lifetime was theoretically predicted.

T-REX: new software for advanced QEXAFS data analysis

New approaches to analyze the data generated by modern time-resolved X-ray absorption spectroscopy instrumentation are presented as part of a new analysis software to handle files containing typically a few thousand EXAFS spectra. Various filter techniques to remove high-frequency noise and run-away values are discussed as well as advanced analysis tools like linear combination fitting, EXAFS fitting, principal component analysis and phase-sensitive detection. These techniques were implemented in a user-friendly graphical user interface to analyse huge data files where it is not possible to treat each spectrum separately. New ideas to exploit existent tools more efficiently for time-resolved EXAFS data analysis are discussed theoretically as well as applied to real measurements, especially in situ catalytic experiments and surface-sensitive reflection-mode X-ray absorption studies of thin film growth.

Intraparticle reduction of arsenite (As(III)) by nanoscale zerovalent iron (nZVI) investigated with In Situ X-ray absorption spectroscopy

While a high efficiency of contaminant removal by nanoscale zerovalent iron (nZVI) has often been reported for several contaminants of great concern, including aqueous arsenic species, the transformations and translocation of contaminants at and within the nanoparticles are not clearly understood. By analysis using in situ time-dependent X-ray absorption spectroscopy (XAS) of the arsenic core level for nZVI in anoxic As(III) solutions, we have observed that As(III) species underwent two stages of transformation upon adsorption at the nZVI surface. The first stage corresponds to breaking of As-O bonds at the particle surface, and the second stage involves further reduction and diffusion of arsenic across the thin oxide layer enclosing the nanoparticles, which results in arsenic forming an intermetallic phase with the Fe(0) core. Extended X-ray absorption fine-structure (EXAFS) data from experiments conducted at different iron/arsenic ratios indicate that the reduced arsenic species tend to be enriched at the surface of the Fe(0) core region and had limited mobility into the interior of the metal core within the experimental time frame (up to 22 h). Therefore, there was an accumulation of partially reduced arsenic at the Fe(0)/oxide interface when a relatively large arsenic content was present in the solid phase. These results illuminate the role of intraparticle diffusion and reduction in affecting the chemical state and spatial distribution of arsenic in nZVI materials.

Nucleation and aggregative growth process of platinum nanoparticles studied by in situ quick XAFS spectroscopy

The early stage in the nucleation and subsequent aggregative particle growth of the colloidal platinum (Pt) dispersions produced by photoreduction in an aqueous ethanol solution of poly(N-vinyl-2-pyrrolidone) (PVP) was quantitatively investigated by means of in situ quick XAFS (QXAFS) measurements. The stages of the reduction-nucleation and the association process (aggregative particle growth and Ostwald ripening) of Pt atoms to produce Pt nanoparticles was successfully discriminated in course of the photoreduction time. The present QXAFS analysis indicated that Pt nuclei (i.e., (Pt(0))(m) nucleates approximately m = 4) were continuously produced in the reduction-nucleation process at the early time, followed by the aggregative particle growth with the autocatalytic reduction of Pt ionic species on the surface of Pt nuclei to produce Pt nanoparticles. Subsequently the particle growth proceeded via Ostwald ripening, resulting in the production of larger Pt nanoparticles at a later time. It was also found that the aggregative particle growth follows a sigmoidal profile well described either by the solid-state kinetic model or by the chemical-mechanism-based kinetic model, specifically the Avrami-Erofe'ev or Finke-Watzky models. The difference in terms of the formation mechanism was observed between the reduction of Pt(IV)Cl(6)(2-) and Pt(II)Cl(4)(2-) as a source material. Also presented is that the addition of the photoactivator such as benzoin, benzophenone, and acetophenone in the system is very effective to enhance the rate for the formation of Pt nanoparticles.

In situ diffuse reflectance IR spectroscopy and X-ray absorption spectroscopy for fast catalytic processes

A new instrument for synchronous in situ investigations of catalytic materials by IR and X-ray absorption spectroscopies was designed and built at the X18A beamline of the National Synchrotron Light Source of Brookhaven National Laboratory. It provides analytical tools for solving structural, electronic and kinetic problems in catalysis science by two complementary methods. Among the features attractive for catalysis research are the broad range of catalytically active elements that can be investigated (starting with Ni and beyond), the wide range of reaction conditions (temperatures up to 873 K, various reactive gases) and time scales (starting from tens of seconds). The results of several representative experiments that illustrate the attractive capabilities of the new set-up are discussed.

Insights into initial kinetic nucleation of gold nanocrystals

Understanding the initial nucleation mechanism of monodisperse nanocrystals (NCs) during synthesis process is an important prerequisite to control the desired sizes and to manipulate the properties of nanoscale materials. The acquisition of information for the small nanocluster nucleation process, however, still remains challenging. Here, using a continuous-flow in situ X-ray absorption fine structure (XAFS) spectroscopy for time-resolved studies, we have clarified the initial kinetic nucleation of Au clusters under the grain size of 1 nm for the classical Au NCs synthesis via the reduction of AuCl(4)(-) in aqueous solution. The in situ XAFS results present the experimental revelation of the formation of intermediate Cl(3)(-)Au-AuCl(3)(-) dimer and the subsequent higher complexes 'Au(n)Cl(n+x)' in the initial nucleation stage. We propose a kinetic three-step mechanism involving the initial nucleation, slow growth, and eventual coalescence for the Au NCs formation, which may be helpful for the synthesis of metallic nanomaterials.

Quick extended x-ray absorption fine structure instrument with millisecond time scale, optimized for in situ applications

In order to learn about in situ structural changes in materials at subseconds time scale, we have further refined the techniques of quick extended x-ray absorption fine structure (QEXAFS) and quick x-ray absorption near edge structure (XANES) spectroscopies at beamline X18B at the National Synchrotron Light Source. The channel cut Si (111) monochromator oscillation is driven through a tangential arm at 5 Hz, using a cam, dc motor, pulley, and belt system. The rubber belt between the motor and the cam damps the mechanical noise. EXAFS scan taken in 100 ms is comparable to standard data. The angle and the angular range of the monochromator can be changed to collect a full EXAFS or XANES spectrum in the energy range 4.7-40.0 KeV. The data are recorded in ascending and descending order of energy, on the fly, without any loss of beam time. The QEXAFS mechanical system is outside the vacuum system, and therefore changing the mode of operation from conventional to QEXAFS takes only a few minutes. This instrument allows the acquisition of time resolved data in a variety of systems relevant to electrochemical, photochemical, catalytic, materials, and environmental sciences.