Etching gold tips suitable for tip-enhanced near-field optical microscopy

The Expanding Frontiers of Tip-Enhanced Raman Spectroscopy

Fundamental understanding of chemistry and physical properties at the nanoscale enables the rational design of interface-based systems. Surface interactions underlie numerous technologies ranging from catalysis to organic thin films to biological systems. Since surface environments are especially prone to heterogeneity, it becomes crucial to characterize these systems with spatial resolution sufficient to localize individual active sites or defects. Spectroscopy presents as a powerful means to understand these interactions, but typical light-based techniques lack sufficient spatial resolution. This review describes the growing number of applications for the nanoscale spectroscopic technique, tip-enhanced Raman spectroscopy (TERS), with a focus on developments in areas that involve measurements in new environmental conditions, such as liquid, electrochemical, and ultrahigh vacuum. The expansion into unique environments enables the ability to spectroscopically define chemistry at the spatial limit. Through the confinement and enhancement of light at the apex of a plasmonic scanning probe microscopy tip, TERS is able to yield vibrational fingerprint information of molecules and materials with nanoscale resolution, providing insight into highly localized chemical effects.

Tip-enhanced Raman spectroscopy - from early developments to recent advances

An analytical technique operating at the nanoscale must be flexible regarding variable experimental conditions while ideally also being highly specific, extremely sensitive, and spatially confined. In this respect, tip-enhanced Raman scattering (TERS) has been demonstrated to be ideally suited to, e.g., elucidating chemical reaction mechanisms, determining the distribution of components and identifying and localizing specific molecular structures at the nanometre scale. TERS combines the specificity of Raman spectroscopy with the high spatial resolution of scanning probe microscopies by utilizing plasmonic nanostructures to confine the incident electromagnetic field and increase it by many orders of magnitude. Consequently, molecular structure information in the optical near field that is inaccessible to other optical microscopy methods can be obtained. In this general review, the development of this still-young technique, from early experiments to recent achievements concerning inorganic, organic, and biological materials, is addressed. Accordingly, the technical developments necessary for stable and reliable AFM- and STM-based TERS experiments, together with the specific properties of the instruments under different conditions, are reviewed. The review also highlights selected experiments illustrating the capabilities of this emerging technique, the number of users of which has steadily increased since its inception in 2000. Finally, an assessment of the frontiers and new concepts of TERS, which aim towards rendering it a general and widely applicable technique that combines the highest possible lateral resolution and extreme sensitivity, is provided.

Ultra-thin Au tip structure: a novel SERS substrate for in situ observation of a p-aminothiophenol surface-catalytic reaction

In situ observation of a p-aminothiophenol surface-catalytic reaction on a novel Au nano-tip structured SERS substrate.

Plasmonic Probe With Circular Nano-Moat for far-Field Free Nanofocusing

In this work, a metallic probe with a sharp tip and two half-circular nanostructures on its base is introduced and investigated. The proposed design aims at improving the detection performance of a probe for scattering scanning near-field optical microscopy in terms of enhanced signal-to-noise ratio. Under the premise of processing feasibility, the structure of the probe is designed and optimized with three-dimensional finite-difference time-domain method. And then the performance and optical property of the probe are theoretically investigated and experimentally demonstrated using a scanning near-field optical microscope with aperture probe. It is indicated that a tightly confined optical field with significantly reduced far-field background can be achieved at the tip apex of the probe.

Tip-enhanced Raman spectroscopy: tip-related issues

After over 15 years of development, tip-enhanced Raman spectroscopy (TERS) is now facing a very important stage in its history. TERS offers high detection sensitivity down to single molecules and a high spatial resolution down to sub-nanometers, which make it an unprecedented nanoscale analytical technique offering molecular fingerprint information. The tip is the core element in TERS, as it is the only source through which to support the enhancement effect and provide the high spatial resolution. However, TERS suffers and will continue to suffer from the limited availability of TERS tips with a high enhancement, good stability, and high reproducibility. This review focuses on the tip-related issues in TERS. We first discuss the parameters that influence the enhancement and spatial resolution of TERS and the possibility to optimize the performance of a TERS system via an in-depth understanding of the enhancement mechanism. We then analyze the methods that have been developed for producing TERS tips, including vacuum-based deposition, electrochemical etching, electrodeposition, electroless deposition, and microfabrication, with discussion on the advantages and weaknesses of some important methods. We also tackle the issue of lifetime and protection protocols of TERS tips which are very important for the stability of a tip. Last, some fundamental problems and challenges are proposed, which should be addressed before this promising nanoscale characterization tool can exert its full potential. Graphical Abstract ᅟ.

Two-step fabrication technique of gold tips for use in point-contact spectroscopy

For a successful point-contact spectroscopy (PCS) measurement, metallic tips of proper shape and smoothness are essential to ensure the ballistic nature of a point-contact junction. Until recently, the fabrication of Au tips suitable for use in point-contact spectroscopy has remained more of an art involving a trial and error method rather than an automated scientific process. To address these issues, we have developed a technique with which one can prepare high quality Au tips reproducibly and systematically. It involves an electronic control of the driving voltages used for an electrochemical etching of a gold wire in a HCl-glycerol mixture or a HCl solution. We find that a stopping current, below which the circuit is set to shut off, is a single very important parameter to produce an Au tip of desired shape. We present detailed descriptions for a two-step etching process for Au tips and also test results from PCS measurements using them.

Nanopatterning and tuning of optical taper antenna apex for tip-enhanced Raman scattering performance

This paper focuses on finding optimal electrochemical conditions from linear sweep voltammetry analysis for preparing highly reproducible tip-enhanced Raman scattering (TERS) conical gold tips with dc-pulsed voltage etching. Special attention is given to the reproducibility of tip apex shapes with different etchant mixtures. We show that the fractional Brownian motion model enables a mathematical description of the decaying current kinetics during the whole etching process up to the cutoff event. Further progress in preparation of highly reproducible smooth and sharp tip apexes is related to the effect of an additive, such as isopropanol, to aqueous acids. A finite-difference time-domain method based near-field analysis provides evidence that TERS performance depends critically on tip orientation relative to a highly focused laser beam. A TERS based criterion for recognizing gold tips able to couple/decouple optical near- and far-fields is proposed.

Nanoscale imaging of InN segregation and polymorphism in single vertically aligned InGaN/GaN multi quantum well nanorods by tip-enhanced Raman scattering

Vertically aligned GaN nanorod arrays with nonpolar InGaN/GaN multi quantum wells (MQW) were grown by MOVPE on c-plane GaN-on-sapphire templates. The chemical and structural properties of single nanorods are optically investigated with a spatial resolution beyond the diffraction limit using tip-enhanced Raman spectroscopy (TERS). This enables the local mapping of variations in the chemical composition, charge distribution, and strain in the MQW region of the nanorods. Nanoscale fluctuations of the In content in the InGaN layer of a few percent can be identified and visualized with a lateral resolution below 35 nm. We obtain evidence for the presence of indium clustering and the formation of cubic inclusions in the wurtzite matrix near the QW layers. These results are directly confirmed by high-resolution TEM images, revealing the presence of stacking faults and different polymorphs close to the surface near the MQW region. The combination of TERS and HRTEM demonstrates the potential of this nanoscale near-field imaging technique, establishing TERS as a very potent, comprehensive, and nondestructive tool for the characterization and optimization of technologically relevant semiconductor nanostructures.

Fast and reliable fabrication of gold tips with sub-50 nm radius of curvature for tip-enhanced Raman spectroscopy

We have developed a new electrochemical etching procedure to fabricate gold tips with sub-50 nm apical radius of curvature with a production yield of 80% and production time lower than 5 min. The technique is based on a two-step self-terminating process in which a gold wire is first quickly (<1 min) pre-etched in an hydrochloric acid (HCl)∕ethanol solution at high voltage (10 VDC), and then slowly (2-4 min) etched at lower voltages (<2.5 VDC). The first step occurs under intense bubbling conditions and allows us to thin rapidly the wire. This reduces the time required by subsequent low-voltage process during which the tips are formed at the liquid∕air interface. A statistical analysis of the surface morphology has been carried out on a set of 60 tips by scanning electron microscopy. The results show that the surface roughness and the sharpness of the final tip are critically influenced by the intrinsic granularity of the gold wires. Moreover, there is a correlation between the tip quality and the time elapse required to complete the low-voltage etching step. Tips featuring smooth surfaces and radii of curvature <50 nm are produced whenever the etching times are lower than 250 s, while etching times larger than 300 s typically yield rough, blunt tips. Such a correlation can be used as a screening criterion to select sharp tips during production with an 80% yield. The high quality of the gold tips produced with such method is confirmed by the electromagnetic field enhancement measured both in tip-enhanced Raman scattering and surface-enhanced Raman scattering on the tip apex experiments.

Constant current etching of gold tips suitable for tip-enhanced Raman spectroscopy

We introduce a setup and method to produce gold tips that are suitable for tip-enhanced Raman spectroscopy by using a single step constant current electrochemical etch. The etching process is fully automated with only three preset parameters: the etching current, the reference voltage and the immersed length of gold wires. By optimizing these parameters, reproducible high quality tips with smooth surface and a radius curvature of about 20 nm can be formed. Tips prepared with this method were examined by tip-enhanced Raman spectroscopy experiments on the samples of single-wall carbon nanotube, p-aminothiophenol, and graphene. In the Raman mapping of single-wall carbon nanotubes, the spatial resolution is about 15 nm.

Fabrication of silver tips for scanning tunneling microscope induced luminescence

We describe a reliable fabrication procedure of silver tips for scanning tunneling microscope (STM) induced luminescence experiments. The tip was first etched electrochemically to yield a sharp cone shape using selected electrolyte solutions and then sputter cleaned in ultrahigh vacuum to remove surface oxidation. The tip status, in particular the tip induced plasmon mode and its emission intensity, can be further tuned through field emission and voltage pulse. The quality of silver tips thus fabricated not only offers atomically resolved STM imaging, but more importantly, also allows us to perform challenging "color" photon mapping with emission spectra taken at each pixel simultaneously during the STM scan under relatively small tunnel currents and relatively short exposure time.

Gold nanocone near-field scanning optical microscopy probes

Near-field scanning optical microscopy enables the simultaneous topographical and subdiffraction limited optical imaging of surfaces. A process is presented for the implementation of single individually engineered gold cones at the tips of atomic force microscopy cantilevers. These cantilevers act as novel high-performance optical near-field probes. In the fabrication, thin-film metallization, electron beam induced deposition of etch masks, and Ar ion milling are combined. The cone constitutes a well-defined highly efficient optical antenna with a tip radius on the order of 10 nm and an adjustable plasmon resonance frequency. The sharp tip enables high resolution topographical imaging. By controllably varying the cone size, the resonance frequency can be adapted to the application of choice. Structural properties of these sharp-tipped probes are presented together with topographical images recorded with a cone probe. The antenna functionality is demonstrated by gathering the near-field enhanced Raman signature of individual carbon nanotubes with a gold cone scanning probe.

Note: Production of sharp gold tips with high surface quality

We present a simple method to produce sharp gold tips with excellent surface quality based on electrochemical etching with potassium chloride. Radii of curvature lie in the range of 20-40 nm and the surface roughness is measured to less than 0.8 nm. The tips are well suited for field emission, field ion microscopy, and likely for tip-enhanced Raman scattering as well as tip-enhanced near-field imaging.

Near-field optical taper antennas fabricated with a highly replicable ac electrochemical etching method

This paper describes a novel chemical etching method to fabricate high quality near-field optical antennas-tapered metallic tips-from gold wire in a reproducible way for optically probing a specimen on the nanoscale. A new type of an electrochemical cell is introduced and different dc and ac etching regimes are studied in detail. The formation and dynamics of a meniscus around a gold wire immersed in an electrolyte when supplying a square wave voltage are considered. We show that in situ etching current kinetics allows one to improve a yield of tips with a well-defined geometry up to 95% by filtering these on the basis of a cutoff current and a power spectrum of etching current fluctuations. As a quantitative measure for estimating the yield we introduce a probability to find tips with curvature radii falling in the range of interest. Testing the tips for a plasmonic effect is implemented with tip-enhanced Raman spectroscopy and sub-wavelength imaging of a thin fullerene film.