Comparison of interionic/intermolecular vibrational dynamics between ionic liquids and concentrated electrolyte solutions

Structure-Dependence and Mechanistic Insights into the Piezoelectric Effect in Ionic Liquids

We reported recently that two imidazolium room-temperature ionic liquids (RTILs) exhibit the direct piezoelectric effect (J. Phys. Chem. Lett., 2023, 14, 2731-2735). We have subsequently investigated several other RTILs with pyrrolidinium and imidazolium cations and tetrafluoroborate and bis(trifluoromethylsulfonyl)imide anions in an effort to gain insight into the generality and mechanism of the effect. All the RTILs studied exhibit the direct piezoelectric effect, with a magnitude (d33) and threshold force that depend on the structures of both the cation and anion. The structure-dependence and existence of a threshold force for the piezoelectric effect are consistent with a pressure-induced liquid-to-crystalline solid phase transition in the RTILs, and this is consistent with experimental X-ray diffraction data.

Wettability and Surface Tension of Imidazolium, Ammonium, and Phosphonium Bis(fluorosulfonyl)amide Ionic Liquids: Comparison between Pentyl, Ethoxyethyl, and Ethylthioethyl Groups

This study particularly compares the surface tensions and contact angles for molten bis(fluorosulfonyl)amide salts of imidazolium, ammonium, and phosphonium cations with the pentyl, ethoxyethyl, or ethylthioethyl group. The examined substrate plates for contact angle measurements include silicate glass, platinum, copper, graphene, and polytetrafluoroethylene (PTFE). In addition, quantum chemistry calculations were performed to obtain the optimized structures of the cations and anions of the ionic liquids (ILs) that were studied here along with some typical anions and their dipole moments, mean polarizabilities, and charge distributions. All ILs showed the same order of contact angles with respect to the substrates: PTFE > graphene ≈ copper ≈ platinum > silicate glass. By comparing the three functional groups, i.e., pentyl, ethoxyethyl, and ethylthioethyl, the ILs with the ethylthioethyl group featured a higher work of adhesion than the respective ILs with the pentyl or ethoxyethyl group. The values of the surface tensions of the ILs followed the same trend for the three functional groups. Based on the Fowkes theory, it was found that the larger surface tensions of the ILs with the ethylthioethyl group compared with pentyl and ethoxyethyl groups were because of the increase in both dispersive and nondispersive components. The quantum chemistry calculations of the ions showed a larger dipole moment and mean polarizability for the cations with the ethylthioethyl group as compared with the pentyl and ethoxyethyl groups. This is consistent with the analysis results of the surface tensions based on the Fowkes theory. By comparing other anions, the dispersive component of the surface tension of the ILs with bis(fluorosulfonyl)amide was large, which is attributed to the small dipole moment of the anion.

Physical Properties and Low-Frequency Polarizability Anisotropy and Dipole Responses of Phosphonium Bis(fluorosulfonyl)amide Ionic Liquids with Pentyl, Ethoxyethyl, or 2-(Ethylthio)ethyl Group

This study compared the physical properties, e.g., glass transition temperature, melting point, viscosity, density, surface tension, and electrical conductivity, and the low-frequency spectra under 200 cm^-1 of three synthesized ionic liquids (ILs), triethylpentylphosphonium bis(fluorosulfonyl)amide ([P₂₂₂₅][NF₂]), ethoxyethyltriethylphosphonium bis(fluorosulfonyl)amide ([P_222(2O2)][NF₂]), and triethyl[2-(ethylthio)ethyl]phosphonium bis(fluorosulfonyl)amide ([P_222(2S2)][NF₂]), at various temperatures using femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES) and terahertz time-domain spectroscopy (THz-TDS). The [P_222(2S2)][NF₂] had the highest viscosity and glass transition temperature, whereas the [P_222(2O2)][NF₂] had the lowest. Among the three ILs, the [P_222(2S2)][NF₂] had the highest density and surface tension, and the [P_222(2O2)][NF₂] had the highest electrical conductivity. The RIKES and THz-TDS spectral line shapes for the three ILs varied significantly. For the [P₂₂₂₅][NF₂], molecular dynamics simulations successfully reproduced the line shapes of the experimental spectra and indicated that the RIKES spectrum was mainly due to the cation and cross-term and their rotational motions, whereas the THz-TDS spectrum was mainly due to the anion and its translational motion. This shows that it is desirable to utilize both fs-RIKES and THz-TDS methods to reveal molecular motions at the low-frequency domain. The [P_222(2S2)][NF₂] had higher frequency peaks and broader bands in the low-frequency spectra via fs-RIKES and THz-TDS than those for the [P₂₂₂₅][NF₂] and [P_222(2O2)][NF₂].

Optical Kerr effect spectroscopy of CS2 in monocationic and dicationic ionic liquids: insights into the intermolecular interactions in ionic liquids

A comparative study of the intermolecular dynamics of CS₂ in monocationic and dicationic ionic liquids (ILs) was performed using optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The reduced spectral densities (RSDs) of mixtures of CS₂ in 1-alkyl-3-methylimidazolium bis[(trifluoromethane)sulfonyl]amide ([C_nC₁im][NTf₂] for n = 3-5) and 1,2n-bis(3-methylimidazolium-1-yl) alkane bis[(trifluoromethane)sulfonyl]amide ([(C₁im)₂C_2n][NTf₂]₂ for n = 3-5) were investigated as a function of concentration at 295 K. An additivity model was used to obtain the CS₂ contribution to the RSD of a mixture in the 0-200 cm^-1 region. One of the aims of this study is to show how CS₂ can be used as a probe of intermolecular/interionic interactions in ILs. The concentrations were chosen such that the CS₂-to-imidazolium ring mole fraction of a mixture with [(C₁im)₂C_2n][NTf₂]₂ (DIL(2n)) is the same as that of a mixture with [C_nC₁im][NTf₂] (MIL(n)). As found previously for CS₂ in monocationic ILs, the intermolecular spectrum of CS₂ in dicationic ILs is lower in frequency and narrower than that of neat CS₂. The new result is that the intermolecular spectrum of CS₂ is higher in frequency in DIL(2n) than in the corresponding MIL(n), indicating that CS₂ molecules experience a stiffer potential in dicationic ILs than in monocationic ILs. The intermolecular dynamics of CS₂ being higher in frequency in DIL(2n) than in MIL(n) is consistent with recent molecular dynamics simulations (Lynden-Bell and Quitevis, J. Chem. Phys., 2018, 148, 193844) that show the stiffer potential is the result of greater confinement of CS₂ in DIL(2n) than in MIL(n). We also show in this study how effects due to dilution and the intermolecular potential seen by a solute molecule in solution are unraveled.

Ab Initio Force Fields for Organic Anions: Properties of [BMIM][TFSI], [BMIM][FSI], and [BMIM][OTf] Ionic Liquids

Room-temperature ionic liquids (ILs) composed of organic anions bis(trifluoromethanesulfonyl)imide (TFSI), bis(fluorosulfonyl)imide (FSI), and trifluoromethanesulfonate (OTf) exhibit interesting physical properties and are important for many electrochemical applications. TFSI and FSI form "hydrophobic" ILs, immiscible with water but miscible with many organic solvents and polymers; for computer simulation studies, it is thus essential to develop force fields for these anions that are transferable among this wide variety of chemical environments. In this work, we develop entirely ab initio force fields for the TFSI, FSI, and OTf anions and predict the properties of corresponding 1-butyl-3-methylimidazolium ILs. We discuss important subtleties in the force field development related to accurately modeling conformational flexibility, that is, relaxed torsional profiles and intramolecular electrostatic interactions. The TFSI anions have notable conformational flexibility in the IL, and we predict approximately 70% cisoid and 20% transoid conformations, which is largely driven by cation/anion ion-pair interactions and is opposite to the trend expected from the anion ab initio potential energy surface. The favorable interactions between the cation and cisoid TFSI conformations result in a shoulder in the cation/anion radial distribution function at short distances, whereas interconversion between cisoid and transoid conformations occurs on a commensurate time scale as ion diffusion processes. In addition to this physical insight on anion effects, we expect that these force fields will have important applications for studying a variety of complex electrolyte systems.

Comparative study of the intermolecular dynamics of imidazolium-based ionic liquids with linear and branched alkyl chains: OHD-RIKES measurements

This article describes a comparative study of the low-frequency (0-450 cm^-1) Kerr spectra of the branched 1-(iso-alkyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([(N - 2)mC_N-1C₁im][NTf₂] with N = 3-7) ionic liquids (ILs) and that of the linear 1-(n-alkyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C_NC₁im][NTf₂] with N = 2-7) ILs. The spectra were obtained by use of femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The intermolecular spectrum of a branched IL is similar to that of a linear IL that is of the same alkyl chain length rather than of the same number of carbon atoms in the alkyl chain. This similarity and the lack of a correlation of the first spectral moments and widths of the intermolecular spectra with chain length is mainly attributed to the increase in the dispersion contribution to the total molar cohesive energy being compensated by stretching of the ionic network due to the increasing size of the nonpolar domains, which is dependent only on the length of the alkyl chain.

Dual Ionic and Organic Nature of Ionic Liquids

Inherited the advantages of inorganic salts and organic solvents, ionic liquids (ILs) exhibit many superior properties allowing them promising green solvents for the future. Although it has been widely acknowledged that the unique features of ILs originate from their dual ionic and organic nature, its microscopic physical origin still remains blurry. In this work, by comparing the ion/molecule cage structures obtained from molecular dynamics simulations for seven prototypic liquids--a molten inorganic salt, four ILs, a strongly polar organic solvent, and a weakly polar organic solvent, we have revealed that the depth of the cage energy landscape characterizes the ionic nature of ILs, whereas the slope and curvature of its mimimum determine the organic nature of ILs. This finding advances our understanding of ILs and thus will help their efficient utilization as well as the systematic design of novel functionalized ILs.

An OHD-RIKES and simulation study comparing a benzylmethylimidazolium ionic liquid with an equimolar mixture of dimethylimidazolium and benzene

The Kerr spectra of a mixture of benzene and an ionic liquid are compared to the corresponding benzylated ionic liquid and found to be surprisingly similar.

Single-step preparation of two-dimensionally organized gold particles via ionic liquid/metal sputter deposition

Sputter deposition of Au onto an ionic liquid with a hydroxyl-functionalized cation produces a uniform monoparticle film on the liquid surface. The size of nanoparticles is controlled by the sputtering conditions.

Probing molecular interaction in ionic liquids by low frequency spectroscopy: Coulomb energy, hydrogen bonding and dispersion forces

Low vibrational spectroscopy provides detailed information on the strength and type of interaction and their influence on the properties of ionic liquids.

The influence of hydrogen bonding on the physical properties of ionic liquids

Potential applications of ionic liquids depend on the properties of this class of liquid material. To a large extent the structure and properties of these Coulomb systems are determined by the intermolecular interactions among anions and cations. In particular the subtle balance between Coulomb forces, hydrogen bonds and dispersion forces is of great importance for the understanding of ionic liquids. The purpose of the present paper is to answer three questions: Do hydrogen bonds exist in these Coulomb fluids? To what extent do hydrogen bonds contribute to the overall interaction between anions and cations? And finally, are hydrogen bonds important for the physical properties of ionic liquids? All these questions are addressed by using a suitable combination of experimental and theoretical methods including newly synthesized imidazolium-based ionic liquids, far infrared spectroscopy, terahertz spectroscopy, DFT calculations, differential scanning calorimetry (DSC), viscometry and quartz-crystal-microbalance measurements. The key statement is that although ionic liquids consist solely of anions and cations and Coulomb forces are the dominating interaction, local and directional interaction such as hydrogen bonding has significant influence on the structure and properties of ionic liquids. This is demonstrated for the case of melting points, viscosities and enthalpies of vaporization. As a consequence, a variety of important properties can be tuned towards a larger working temperature range, finally expanding the range of potential applications.