Collection method for extra aligned nanofibers deposited by electrospinning

In situ syringe rotation system for heavy microparticle suspension stability in electrospinning technique

Electrospinning allows the fabrication of polymeric nonwovens with a wide variety of inclusions in the micro-nanofibers. However, the electrospinning of microparticle-filled polymer solutions is still limited in particle size, density, and concentration, mainly due to suspension instability during the electrospinning process, so it is not commonly investigated despite the vast number of possible applications. In this study, a simple and effective novel rotation device was developed to prevent the settling of microparticles in the polymer solution during electrospinning. The stability of polyvinyl alcohol and polyvinylidene fluoride (PVDF) solutions with indium microparticles (IMPs) of (42 ± 7) μm diameter was evaluated using LASER transmittance inside a syringe, both static and rotating for 24 h. While the static suspensions completely settled at 7 min and 9 h, respectively, depending on solution viscosity, the rotating suspensions remained stable throughout the experiment. The number and distribution of IMPs in PVDF electrospun mats were determined by optic microscopy and a novel x-ray imaging mapping method, showing 165% more IMPs in the mat obtained with the rotating syringe device. A simple analysis of the theoretical background of settling and rotating suspensions was included to understand the working mechanism of the device. Also, the electrospinning of solutions with high loadings of IMPs (up to 400% w/w PVDF) was accomplished. The simplicity and outstanding efficiency of the device shown in this work may serve as a solution to technical difficulties and as an encouragement to future research in microparticle-filled solution electrospinning.

Anisotropic Materials for Skeletal-Muscle-Tissue Engineering

Repair of damaged skeletal-muscle tissue is limited by the regenerative capacity of the native tissue. Current clinical approaches are not optimal for the treatment of large volumetric skeletal-muscle loss. As an alternative, tissue engineering represents a promising approach for the functional restoration of damaged muscle tissue. A typical tissue-engineering process involves the design and fabrication of a scaffold that closely mimics the native skeletal-muscle extracellular matrix (ECM), allowing organization of cells into a physiologically relevant 3D architecture. In particular, anisotropic materials that mimic the morphology of the native skeletal-muscle ECM, can be fabricated using various biocompatible materials to guide cell alignment, elongation, proliferation, and differentiation into myotubes. Here, an overview of fundamental concepts associated with muscle-tissue engineering and the current status of muscle-tissue-engineering approaches is provided. Recent advances in the development of anisotropic scaffolds with micro- or nanoscale features are reviewed, and how scaffold topographical, mechanical, and biochemical cues correlate to observed cellular function and phenotype development is examined. Finally, some recent developments in both the design and utility of anisotropic materials in skeletal-muscle-tissue engineering are highlighted, along with their potential impact on future research and clinical applications.

Note: Non-invasive optical method for rapid determination of alignment degree of oriented nanofibrous layers

This paper presents a rapid non-destructive method that provides information on the anisotropic internal structure of nanofibrous layers. A laser beam of a wavelength of 632.8 nm is directed at and passes through a nanofibrous layer prepared by electrostatic spinning. Information about the structural arrangement of nanofibers in the layer is directly visible in the form of a diffraction image formed on a projection screen or obtained from measured intensities of the laser beam passing through the sample which are determined by the dependency of the angle of the main direction of polarization of the laser beam on the axis of alignment of nanofibers in the sample. Both optical methods were verified on Polyvinyl alcohol (PVA) nanofibrous layers (fiber diameter of 470 nm) with random, single-axis aligned and crossed structures. The obtained results match the results of commonly used methods which apply the analysis of electron microscope images. The presented simple method not only allows samples to be analysed much more rapidly and without damaging them but it also makes possible the analysis of much larger areas, up to several square millimetres, at the same time.

Note: a multifunctional electrospinning system for manufacturing diversified nanofibrous structures

A multifunctional electrospinning system has been developed to fabricate diversified nanofibrous structures. It consists of a high voltage power supply, a syringe pump, and a cage like collector that are dominated via the controller by setting parameters from a touch screen. As the key component, speed, and diameter of the collector can be adjusted automatically according to predetermined requirement, which enhances the flexibility of the system. Well-aligned nanofiber array, nanofibrous membrane, and 3D nanofibrous structure were obtained successfully through the technique. This work should be of help to construct functional nanofibrous materials for promoting the development of electrospinning.