Laser production of supersonic metal cluster beams

Symmetry reduction induced by argon tagging gives access to low-lying excited states of FeH+ in the overtone region of the Fe-H stretching mode

Iron is the most abundant transition metal in the interstellar medium (ISM), and is thought to be involved in a variety of astrochemical processes. Here, we present the infrared multiple photon dissociation (IRMPD) spectra of Ar1,2FeH+ and their deuterated isotopologues in the region of 2240-14 000 cm-1. The Fe-H overtone stretching mode in ArFeH+ and Ar2FeH+ is observed at 3636 ± 28 cm-1 and 3659 ± 13 cm-1, respectively. Deuteration shifts these bands to 2618 ± 31 cm-1 and 2650 ± 14 cm-1 in ArFeD+ and Ar2FeD+, respectively. Additionally, the spectra of Ar2FeH+ and Ar2FeD+ feature broad transitions at ∼2200-4000 cm-1 and ∼4500-6500 cm-1. We assign these bands to electronic transitions from the thermally populated X5A2/X'5A1 ground state manifold into the A'5B2 and B5A1 states, which we model with multi-reference quantum chemical calculations including spin-orbit coupling. The calculations show that these transitions are symmetry forbidden in FeH+ and in the equilibrium geometry of ArFeH+/ArFeD+, while the zero-point oscillation of the bending mode of the triatomic molecule leads to some oscillator strength. Upon addition of the second argon atom, the transitions become weakly allowed in the equilibrium geometry of Ar2FeH+/Ar2FeD+ due to symmetry reduction from C∞v to C2v.

Infrared Spectroscopic Characterization of Early 4d Transition Metal Carbene Cations, ZrCH2+ and NbCH2. J Phys Chem A 2024;128:6658-6667. [PMID: 39083656 DOI: 10.1021/acs.jpca.4c03553] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

IR multiple-photon dissociation (IRMPD) action spectroscopy is combined with quantum chemical calculations to examine the [M,C,2H]+ species for the early 4d metals, M = Zr and Nb. These ions were formed by reacting laser ablated M+ ions with cyclopropane (c-C3H6) in a molecular beam apparatus. Both IRMPD spectra exhibit one major band near 700 cm-1 and a second weaker band at about twice that wavenumber, more evident when irradiated in focus. The [Nb,C,2H]+ species also has a sharp band at 800 cm-1. Comparison with B3LYP calculations allow assignment of the [M,C,2H]+ structures to agostic carbenes, which is similar to the structures found for the 5d analogues, WCH2+ and TaCH2+. A molecular orbital analysis traces the reasons for the agostic deformation from a classic C2v symmetric carbene.

Protector-free, non-plasmonic silver quantum clusters by femtosecond pulse laser irradiation: in situ binding on nanocellulose filaments for improved catalytic activity and cycling performance

This study introduces a new, facile method to synthesize silver clusters from aqueous silver ion solution by using high intensity femtosecond pulse laser irradiation. The particles obtained in the absence of reducing or capping agents are 1-17 nm in size and presented quantum properties, as characterized by fluorescence, but did not exhibit plasmon signals, which is not a common characteristic of conventional silver nanoparticles. In a further development, small silver quantum clusters (∼1 nm) were bound in situ to wet-spun filaments of cellulose nanofibrils by pulsed laser irradiation. The obtained hybrid filaments as well as free silver quantum clusters revealed a catalytic activity remarkably higher than that of free gold quantum clusters; moreover, the hybrid filaments were found to show improved stability and cycling performance for silver-based catalysis. The present results indicate the potential of femtosecond laser irradiation to generate clusters as well as hybrid systems with excellent performance and reactivity.

Multiconfigurational Character of Repulsive A2Σg+ State Leaves Strong Signature in the Photodissociation Spectrum of Zn2. J Am Chem Soc 2024;146:16385-16388. [PMID: 38838087 PMCID: PMC11191677 DOI: 10.1021/jacs.4c05620] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

For the excitation to a repulsive state of a diatomic molecule, one expects a single broad peak in the photodissociation spectrum. For Zn2+, however, two peaks for the spin- and symmetry-allowed A2Σg+ ← X2Σu+ transition are observed. A detailed quantum-chemical analysis reveals pronounced multiconfigurational character of the A2Σg+ state. The σg(4s)2σg(4p) configuration with bond order 1.5 dominates at short distances, while the repulsive σg(4s)σu*(4s)2 configuration with bond order -0.5 wins over with increasing bond length. The two excited-state configurations contribute with opposite signs to the transition dipole moment, which reaches zero near the equilibrium distance. This local minimum of the oscillator strength is responsible for the pronounced dip in the photodissociation spectrum, which is thus the spectroscopic signature of the multiconfigurational character of the A2Σg+ state.

Exploring structures of small anionic nickel-ethanol clusters with infrared spectroscopy

Small anionic nickel clusters with ethanol are investigated with a combination of mass-selective infrared photodissociation spectroscopy in a molecular beam and density functional theory simulations at the BLYP/6-311g(d,p) and TPSSh/def2-TZVPP level. In this context, the O-H stretching vibration of the ethanol is analyzed to obtain information about the structural motif, the geometry of the metal core, and the spin state of the clusters. For the [Ni2(EtOH)]- and [Ni3(EtOH)]- clusters, we assign quartet states of motifs with a hydrogen bond from the ethanol to the linear nickel core. The aggregation of a further ethanol molecule, yielding the [Ni3(EtOH)2]- cluster, results in the formation of a cooperative hydrogen bond network between the nickel core and the two ethanol molecules.

Advances in Naked Metal Clusters for Catalysis

The properties of sub-nano metal clusters are governed by quantum confinement and their large surface-to-bulk ratios, atomically precise compositions and geometric/electronic structures. Advances in metal clusters lead to new opportunities in diverse aspects of sciences including chemo-sensing, bio-imaging, photochemistry, and catalysis. Naked metal clusters having synergic multiple active sites and coordinative unsaturation and tunable stability/activity enable researchers to design atomically precise metal catalysts with tailored catalysis for different reactions. Here we summarize the progress of ligand-free naked metal clusters for catalytic applications. It is anticipated that this review helps to better understand the chemistry of small metal clusters and facilitates the design and development of new catalysts for potential applications.

Structural and Chemical Bonding Properties of AuS2H0/-: A Photoelectron Velocity-Map Imaging Spectroscopic and Theoretical Study

Mass-selected photoelectron velocity-map imaging spectroscopy was employed to investigate the geometrical and electronic properties of AuS2H-/0. The comprehensive comparison between the experiment and theoretical calculations establishes that the ground-state AuS2H- anion has a mixed-ligand structure [SAuSH]- with an unsymmetrical S-Au-S unit. Further chemical bonding analyses on AuS2H and comparison with the isoelectronic AuS2- suggest that the unique S-Au-S unit in these species features two three-center, three-electron π-bonding, and one three-center, two-electron σ-bonding. The isoelectronic replacement of the extra electron in AuS2- by the H atom can lead to σ bonding evolution from the electron-sharing bond to the dative bond. These findings are conducive to the fundamental understanding of the intrinsic stability of thiolate-protected gold nanoclusters and their delicate ligand design to achieve desirable properties.

Iron Complexes as Potential Carriers of Diffuse Interstellar Bands: The Photodissociation Spectrum of Fe+(H2O) at Optical Wavelengths

The fullerene ion C60+ is the only carrier of diffuse interstellar bands (DIBs) identified so far. Transition-metal compounds feature electronic transitions in the visible and near-infrared regions, making them potential DIB carriers. Since iron is the most abundant transition metal in the cosmos, we here test this idea with Fe+(H2O). Laboratory spectra were obtained by photodissociation spectroscopy at 80 K. Spectra were modeled with the reflection principle. A high-resolution spectrum of the DIB standard star HD 183143 served as an observational reference. Two broad bands were observed from 4120 to 6800 Å. The 4120-4800 Å band has sharp features emerging from the background, which have the width of DIBs but do not match the band positions of the reference spectrum. Calculations show that the spectrum arises from a d-d transition at the iron center. While no match was found for Fe+(H2O) with known DIBs, the observation of structured bands with line widths typical for DIBs shows that small molecules or molecular ions containing iron are promising candidates for DIB carriers.

Quantitative Aspects of Gas-Phase Metal Ion Chemistry: Conservation of Spin, Participation of f Orbitals, and C-H Activation and C-C Coupling

In this Featured Article, I reflect on over 40 years of guided ion beam tandem mass spectrometry (GIBMS) studies involving atomic metal cations and their clusters throughout the periodic table. Studies that have considered the role of spin conservation (or lack thereof) are a primary focus with a quantitative assessment of the effects examined. A need for state-specific studies of heavier elements is noted, as is a more quantitative assessment of spin-orbit interactions in reactivity. Because GIBMS experiments explicitly evaluate the kinetic energy dependence of reactions over a wide range, several interesting and unusual observations are highlighted. More detailed studies of such unusual reaction events would be welcome. Activation of C-H bonds and ensuing C-C coupling events are reviewed, with future work encouraged. Finally, studies of lanthanides and actinides are examined with an eye on understanding the role of f orbitals in the chemistry, both as participants (or not) in the bonding and as sources/sinks of electron density. This area seems to be ripe for more quantitative experiments.

Investigating cooperative effects in small cobalt and cobalt-nickel alloy clusters with attached ethanol

Small cationic cobalt, and cobalt-nickel alloy clusters with ethanol attached are generated in a pulsed molecular beam experiment using a laser ablation source. While the metal center is successively varied with respect to size and composition, a full-size study of these transition metal clusters is possible. The clusters are investigated via IR photodissociation spectroscopy in the region of OH- and CH-stretching vibrations. The results are compared with theoretical data obtained from DFT calculations. Both frequency shifts and structural changes according to cluster size and composition are identified and discussed in detail, also with respect to cooperative effects. Trimeric metal clusters with an uneven number of nickel atoms show evidence for C-O cleavage of the ethanol molecule. This result is elucidated by further calculations concerning the reactivity, charge and energetic distributions.

Oxidative Activation of Small Aluminum Nanoclusters with Boron Atom Substitution prior to Completing the Endohedral B@Al12- Superatom

Elemental substitution and doping validate the optimization of chemical and physical properties of functional materials, and the composition ratio of the substituting atoms generally determines their properties by changing their geometric and electronic structures. For atomically precise nanoclusters (NCs) consisting of countable atom aggregates, the composition can be controlled accurately to provide an ideal model to study the heteroatom substitution effects. Since aluminum (Al) and boron (B) both belong to group 13 in the periodic table, the effect of B atom substitution on Aln NCs can be investigated while maintaining the total number of valence electrons in AlnBm NCs. In this study, oxidative reactivities of small Al NCs with B atom substitution are studied for AlnBm NCs (m = 1, n = 6-14 and m = 2, n = 11) supported on organic surfaces by using X-ray photoelectron spectroscopy and oxygen molecule (O2) exposure measurements. Before completing the endohedral B@Al12- superatomic NC, one B atom substitution in Al NCs (AlnB) enhances oxidative reactivities 3-20 times compared to those of Aln+1, particularly for n ≤ 11. When one Al atom of Al12B is further substituted by a B atom to form Al11B2, the reactivity drastically increases (6.6 × 102 times), showing that the B atom substitution makes the NC chemically active or inactive geometrically depending on the exohedral or endohedral site for the B atom in the Al NC. In addition, density functional theory calculations show that the electronegative B atom contributes to forming a locally positive Al site to facilitate O2 adsorption except in Al12B, in which the B atom is geometrically shielded by the surface of the Al12 cage in B@Al12.

Controlled Formation of Fused Metal Chalcogenide Nanoclusters Using Soft Landing of Gaseous Fragment Ions

The complete ligation of nanoclusters significantly reduces their chemical reactivity, catalytic activity, and charge transfer properties. Therefore, in applications, nanoclusters are activated through partial ligand removal to take advantage of their full potential. However, the precise control of ligand removal in the condensed phase is challenging. In this study, we examine the reactivity of well-defined activated nanoclusters on surfaces prepared through controlled ligand removal in the gas phase. To accomplish this, we utilized a specially designed ion soft-landing instrument equipped with a collision cell to prepare mass-selected fragment ions, which were then deposited onto self-assembled monolayer (SAM) surfaces. Specifically, we generated fragment ions by selectively removing one or two ligands from a series of atomically precise ligated metal sulfide clusters, Co5MS8(L1)6+ (M = Co, Mn, Fe, or Ni, L1 = PEt3). Removal of one ligand from Co5MS8(L1)6+ (M = Co, Mn, Ni) generates Co5MS8(L1)5+ species, which undergo selective dimerization on SAMs. Meanwhile, Co5FeS8(L1)5+ is unreactive and remains intact when it is deposited onto a SAM surface. In contrast, fragments formed by the removal of two ligands, Co5MS8(L1)4+, undergo several nonselective reactions and generate larger fused clusters. We found that the reactivity of the Co5MS8(L1)5+ fragment ions is correlated with the gas phase stability of the corresponding precursor ion toward ligand loss. Specifically, the relatively unstable precursor ion, Co5FeS8(L1)6+, generates the least reactive fragment. Meanwhile, the more stable precursor ions generate more reactive Co5MS8(L1)5+ fragments that dimerize on surfaces. This observation was also confirmed by co-deposition of fragment ions with two different ligands, Co5MS8(L1)5+ and Co5MS8(L2)5+ (L1 = PEt3 and L2 = PEt2Ph), where fragments generated from more stable precursor ions tend to dimerize and generate dimers with mixed ligands. This study unveils the previously unrecognized potential of fragment ions in generating compounds that are difficult to synthesize using conventional methods. Additionally, it provides a mechanistic understanding of the observed reactivity. Mass-selected deposition of well-defined fragment ions emerges as a powerful approach for designing materials by precisely activating and depositing undercoordinated ligated nanoclusters onto surfaces.

Metal nanoclusters: from fundamental aspects to electronic properties and optical applications

Monolayer-protected noble metal clusters, also called nanoclusters, can be produced with the atomic precision and in large-scale quantity and are playing an increasingly important role in the field of nanoscience. To outline the origin and the perspectives of this new field, we overview the main results obtained on free metal clusters produced in gas phase including mainly electronic properties, the giant atom concept, the optical properties, briefly the role of the metal atom (alkali, divalent, noble metal) and finally the atomic structure of clusters. We also discuss the limitations of the free clusters. Then, we describe the field of monolayer-protected metal clusters, the main results, the new offered perspectives, the added complexity, and the role of the ligand beyond the superatom concept.

Probing the binding and activation of small molecules by gas-phase transition metal clusters via IR spectroscopy

Isolated transition metal clusters have been established as useful models for extended metal surfaces or deposited metal particles, to improve the understanding of their surface chemistry and of catalytic reactions. For this objective, an important milestone has been the development of experimental methods for the size-specific structural characterization of clusters and cluster complexes in the gas phase. This review focusses on the characterization of molecular ligands, their binding and activation by small transition metal clusters, using cluster-size specific infrared action spectroscopy. A comprehensive overview and a critical discussion of the experimental data available to date is provided, reaching from the initial results obtained using line-tuneable CO₂ lasers to present-day studies applying infrared free electron lasers as well as other intense and broadly tuneable IR laser sources.

Carbon Dioxide and Water Activation by Niobium Trioxide Anions in the Gas Phase

Transition metals are important in various industrial applications including catalysis. Due to the current concentration of CO₂ in the atmosphere, various ways for its capture and utilization are investigated. Here, we study the activation of CO₂ and H₂O at [NbO₃]^- in the gas phase using a combination of infrared multiple photon dissociation spectroscopy and density functional theory calculations. In the experiments, Fourier-transform ion cyclotron resonance mass spectrometry is combined with tunable IR laser light provided by the intracavity free-electron laser FELICE or optical parametric oscillator-based table-top laser systems. We present spectra of [NbO₃]^-, [NbO₂(OH)₂]^-, [NbO₂(OH)₂]^-(H₂O) and [NbO(OH)₂(CO₃)]^- in the 240-4000 cm^-1 range. The measured spectra and observed dissociation channels together with quantum chemical calculations confirm that upon interaction with a water molecule, [NbO₃]^- is transformed to [NbO₂(OH)₂]^- via a barrierless reaction. Reaction of this product with CO₂ leads to [NbO(OH)₂(CO₃)]^- with the formation of a [CO₃] moiety.

Gas phase deposition of well-defined bimetallic gold-silver clusters for photocatalytic applications

Cluster beam deposition is employed for fabricating well-defined bimetallic plasmonic photocatalysts to enhance their activity while facilitating a more fundamental understanding of their properties. Au_xAg_1-x clusters with compositions (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9 and 1) spanning the metals' miscibility range were produced in the gas-phase and soft-landed on TiO₂ P25-coated silicon wafers with an optimal coverage of 4 atomic monolayer equivalents. Electron microscopy images show that at this coverage most clusters remain well dispersed whereas EXAFS data are in agreement with the finding that the deposited clusters have an average size of ca. 5 nm and feature the same composition as the ablated alloy targets. A composition-dependant electron transfer from Au to Ag that is likely to impart chemical stability to the bimetallic clusters and protect Ag atoms against oxidation is additionally evidenced by XPS and XANES. Under simulated solar light, Au_xAg_1-x clusters show a remarkable composition-dependent volcano-type enhancement of their photocatalytic activity towards degradation of stearic acid, a model compound for organic fouling on surfaces. The Formal Quantum Efficiency (FQE) is peaking at the Au_0.3Ag_0.7 composition with a value that is twice as high as that of the pristine TiO₂ P25 under solar simulator. Under UV the FQE of all compositions remains similar to that of pristine TiO₂. A classical electromagnetic simulation study confirms that among all compositions Au_0.3Ag_0.7 features the largest near-field enhancement in the wavelength range of maximal solar light intensity, as well as sufficient individual photon energy resulting in a better photocatalytic self-cleaning activity. This allows ascribing the mechanism for photocatalysis mostly to the plasmonic effect of the bimetallic clusters through direct electron injection and near-field enhancement from the resonant cluster towards the conduction band of TiO₂. These results not only demonstrate the added value of using well-defined bimetallic nanocatalysts to enhance their photocatalytic activity but also highlights the potential of the cluster beam deposition to design tailored noble metal modified photocatalytic surfaces with controlled compositions and sizes without involving potentially hazardous chemical agents.

Bridging the gas and condensed phases for metal-atom encapsulating silicon- and germanium-cage superatoms: electrical properties of assembled superatoms

With the development of nanocluster (NC) synthesis methods in the gas phase, atomically precise NCs composed of a finite number of metal and semiconductor atoms have emerged. NCs are expected to be the smallest units for nanomaterials with various functions, such as catalysts, optoelectronic materials, and electromagnetic devices. The exploration of a stable NC called a magic number NC has revealed a couple of important factors, such as a highly symmetric geometric structure and an electronic shell closure, and a magic number behavior is often enhanced by mixing additional elements. A synergetic effect between geometric and electronic structures leads to the formation of chemically robust NC units called superatoms (SAs), which act as individual units assembled as thin films. The agglomeration of non-ligated bare SAs is desirable in fabricating the assembled SAs associated with intrinsic SA nature. The recent development of an intensive pulsed magnetron sputtering method opens up the scalable synthesis of SAs in the gas phase, enabling the fabrication of SA assembly coupled with the non-destructive deposition of a soft-landing technique. This perspective describes our recent progress in the investigation of the formation of binary cage SA (BCSA) assembled thin films composed of metal-atom encapsulating silicon-cage SAs (M@Si₁₆) and germanium-cage SAs (M@Ge₁₆), with a focus on their electrical properties associated with a conduction mechanism toward the development of new functional nanoscale materials.

Ion Mobility Mass Spectrometry (IM-MS) for Structural Biology: Insights Gained by Measuring Mass, Charge, and Collision Cross Section

The investigation of macromolecular biomolecules with ion mobility mass spectrometry (IM-MS) techniques has provided substantial insights into the field of structural biology over the past two decades. An IM-MS workflow applied to a given target analyte provides mass, charge, and conformation, and all three of these can be used to discern structural information. While mass and charge are determined in mass spectrometry (MS), it is the addition of ion mobility that enables the separation of isomeric and isobaric ions and the direct elucidation of conformation, which has reaped huge benefits for structural biology. In this review, where we focus on the analysis of proteins and their complexes, we outline the typical features of an IM-MS experiment from the preparation of samples, the creation of ions, and their separation in different mobility and mass spectrometers. We describe the interpretation of ion mobility data in terms of protein conformation and how the data can be compared with data from other sources with the use of computational tools. The benefit of coupling mobility analysis to activation via collisions with gas or surfaces or photons photoactivation is detailed with reference to recent examples. And finally, we focus on insights afforded by IM-MS experiments when applied to the study of conformationally dynamic and intrinsically disordered proteins.

Geometric and electronic diversity of metal doped boron clusters

Being intermediate between small compounds and bulk materials, nanoparticles possess unique properties different from those of atoms, molecules, and bulk matter. In the past two decades, a combination of cluster structure prediction algorithms and experimental spectroscopy techniques was successfully used for exploration of the ground-state structures of pure and metal-doped boron clusters. The fruitfulness of this dual approach is well illustrated by the discovery of intriguing microstructures and unique physicochemical properties such as aromaticity and bond fluxionality for both boron and metal-doped boron clusters. Our review starts with an overview of geometrical configurations of pure boron clusters B_n, which are presented by planar, nanotube, bilayer, fullerene-like and core-shell structures, in a wide range ofnvalues. We consider next recent advances in studies of boron clusters doped with metal atoms paying close and thoughtful attention to modifications of geometric and electronic structures of pure boron clusters by heteroatoms. Finally, we discuss the possibility of constructing boron-based nanomaterials with specific functions from metal-boron clusters. Despite a variety of fruitful results obtained in numerous studies of boron clusters, the exploration of boron-based chemistry has not yet reached its peak. The intensive research continues in this area, and it should be expected that it brings exciting discoveries of intriguing new structures.

Activation of Methane by Zr+: A Deep-Dive into the Potential Surface via Pressure- and Temperature-Dependent Kinetics with Statistical Modeling

The kinetics of Zr⁺ + CH₄ are measured using a selected-ion flow tube apparatus over the temperature range 300-600 K and the pressure range 0.25-0.60 Torr. Measured rate constants are small, never exceeding 5% of the Langevin capture value. Both collisionally stabilized ZrCH₄⁺ and bimolecular ZrCH₂⁺ products are observed. A stochastic statistical modeling of the calculated reaction coordinate is used to fit the experimental results. The modeling indicates that an intersystem crossing from the entrance well, necessary for the bimolecular product to be formed, occurs faster than competing isomerization and dissociation processes. That sets an upper limit on the lifetime of the entrance complex to crossing of 10^-11 s. The endothermicity of the bimolecular reaction is derived to be 0.09 ± 0.05 eV, in agreement with a literature value. The observed ZrCH₄⁺ association product is determined to be primarily HZrCH₃⁺ not Zr⁺(CH₄), indicating that bond activation has occurred at thermal energies. The energy of HZrCH₃⁺ relative to separated reactants is determined to be -0.80 ± 0.25 eV. Inspection of the statistical modeling results under best-fit conditions reveals reaction dependences on impact parameter, translation energy, internal energy, and angular momentum. Reaction outcomes are heavily affected by angular momentum conservation. Additionally, product energy distributions are predicted.

Tuning the degree of CO2 activation by carbon doping Cun- (n = 3-10) clusters: an IR spectroscopic study

Copper clusters on carbide surfaces have shown a high catalytic activity towards methanol formation. To understand the interaction between CO₂ and the catalytically active sites during this process and the role that carbon atoms could play in this, they are modeled by copper clusters, with carbon atoms incorporated. The formed clusters Cu_nC_m^- (n = 3-10, m = 1-2) are reacted with CO₂ and investigated by IR multiple-photon dissociation (IR-MPD) spectroscopy to probe the degree of CO₂ activation. IR spectra for the reaction products [Cu_nC·CO₂]^-, (n = 6-10), and [Cu_nC₂·CO₂]^-, (n = 3-8) are compared to reference spectra recorded for products formed when reacting the same cluster sizes with CO, and with density functional theory (DFT) calculated spectra. The results reveal a size- and carbon load-dependent activation and dissociation of CO₂. The complexes [Cu_nC·CO₂]^- with n = 6 and 10 show predominantly molecular activation of CO₂, while those with n = 7-9 show only dissociative adsorption. The addition of the second carbon to the cluster leads to the exclusive molecular activation of the CO₂ on all measured cluster sizes, except for Cu₅C₂^- where CO₂ dissociates. Combining these findings with DFT calculations leads us to speculate that at lower carbon-to-metal ratios (CMRs), the C can act as an oxygen anchor facilitating the OCO bond rupture, whereas at higher CMRs the carbon atoms increasingly attract negative charge, reducing the Cu cluster's ability to donate electron density to CO₂, and consequently its ability to activate CO₂.

Photoelectron imaging of size-selected metal cluster anions in a quasi-continuous mode

We present a novel high-repetition-rate photoelectron imaging (PEI) apparatus for exploring electronic structures of metal cluster anions. A continuous beam of mass-selected metal cluster anions, generated by a magnetron-sputtering cluster-ion source coupled with a quadrupole mass filter, is chopped into sub-megahertz ion bunches using a high-voltage pulser. The quasi-continuous anion beam is introduced into a PEI spectrometer, where the anions are photodetached using a 404 nm (3.07 eV) continuous-wave laser diode. As a demonstration, we acquire photoelectron images for size-selected Ag cluster anions, Ag_N ^- (N = 3, 7, 14), and show that each image can be obtained in a short accumulation time (50 s) with a kinetic energy resolution (ΔE/E) of 4% at E = 1.77 eV. The quasi-continuous PEI technique enables high-count-rate, space-charge-free acquisition of photoelectron spectra and angular distributions not only from size-selected metal cluster anions but also from anions prepared by other continuous ion sources, such as electrospray ionization.

Fullerenes for the treatment of cancer: an emerging tool

Cancer is a most common cause of mortality globally. Available medicines possess severe side effects owing to their non-specific targeting. Hence, there is a need of an alternative in the healthcare system that should have high efficacy with the least side effects, also having the ability to achieve site-specific targeting and be reproducible. This is possible with the help of fullerenes. Fullerenes are having the unique physicochemical and photosensitizer properties. This article discusses the synthesis, functionalization, mechanism, various properties, and applications of C60 fullerenes in the treatment of cancer. The review article also addresses the various factors influencing the activity of fullerenes including the environmental conditions, toxicity profile, and future prospective.

Toward Detection of FeH+ in the Interstellar Medium: Infrared Multiple Photon Dissociation Spectroscopy of Ar2FeH. J Phys Chem Lett 2022;13:5867-5872. [PMID: 35728268 PMCID: PMC9251756 DOI: 10.1021/acs.jpclett.2c01511]

The iron hydride molecular cation FeH⁺ is expected to be present in the interstellar medium. Because of the lack of laboratory data, it is yet to be identified in spectrally resolved astronomic observations. As a benchmark for computational predictions and to guide an experimental search for the ro-vibrational lines of FeH⁺, we performed infrared multiple photon dissociation (IRMPD) spectroscopy of FeH⁺ tagged with two argon atoms. The Fe-H stretching mode in Ar₂FeH⁺ is observed at 1860 cm^-1. Combination bands of the Fe-H stretch with the two Fe-H bending and the asymmetric Fe-Ar stretching modes are observed at 2012 cm^-1, 2054 cm^-1, and 2078 cm^-1. Quantum chemical calculations show that the molecule has C_2v symmetry. The Ar-Fe-Ar bending mode at 46 cm^-1 is significantly populated at the temperature of the experiment, causing thermal broadening of the Fe-H stretch and its redshift with increasing internal energy.

Comparison of Conventional and Nonconventional Hydrogen Bond Donors in Au- Complexes

Although gold has become a well-known nonconventional hydrogen bond acceptor, interactions with nonconventional hydrogen bond donors have been largely overlooked. In order to provide a better understanding of these interactions, two conventional hydrogen bonding molecules (3-hydroxytetrahydrofuran and alaninol) and two nonconventional hydrogen bonding molecules (fenchone and menthone) were selected to form gas-phase complexes with Au^-. The Au^-[M] complexes were investigated using anion photoelectron spectroscopy and density functional theory. Au^-[fenchone], Au^-[menthone], Au^-[3-hydroxyTHF], and Au^-[alaninol] were found to have vertical detachment energies of 2.71 ± 0.05, 2.76 ± 0.05, 3.01 ± 0.03, and 3.02 ± 0.03 eV, respectively, which agree well with theory. The photoelectron spectra of the complexes resemble the spectrum of Au^- but are blueshifted due to the electron transfer from Au^- to M. With density functional theory, natural bond orbital analysis, and atoms-in-molecules analysis, we were able to extend our comparison of conventional and nonconventional hydrogen bonding to include geometric and electronic similarities. In Au^-[3-hydroxyTHF] and Au^-[alaninol], the hydrogen bonding comprised of Au^-···HO as a strong, primary hydrogen bond, with secondary stabilization by weaker Au^-···HN or Au^-···HC hydrogen bonds. Interestingly, the Au^-···HC bonds in Au^-[fenchone] and Au^-[menthone] can be characterized as hydrogen bonds, despite their classification as nonconventional hydrogen bond donors.

Size-dependent H and H2 formation by infrared multiple photon dissociation spectroscopy of hydrated vanadium cations, V+(H2O)n, n = 3-51

Infrared spectra of the hydrated vanadium cation (V⁺(H₂O)_n; n = 3–51) were measured in the O–H stretching region employing infrared multiple photon dissociation (IRMPD) spectroscopy. Spectral fingerprints, along with size-dependent fragmentation channels, were observed and rationalized by comparing to spectra simulated using density functional theory. Photodissociation leading to water loss was found for cluster sizes n = 3–7, consistent with isomers featuring intact water ligands. Loss of molecular hydrogen was observed as a weak channel starting at n = 8, indicating the advent of inserted isomers, HVOH⁺(H₂O)_n−1. The majority of ions for n = 8, however, are composed of two-dimensional intact isomers, concordant with previous infrared studies on hydrated vanadium. A third channel, loss of atomic hydrogen, is observed weakly for n = 9–11, coinciding with the point at which the H and H₂O calculated binding energies become energetically competitive for intact isomers. A clear and sudden spectral pattern and fragmentation channel intensity at n = 12 suggest a structural change to inserted isomers. The H₂ channel intensity decreases sharply and is not observed for n = 20 and 25–51. IRMPD spectra for clusters sizes n = 15–51 are qualitatively similar indicating no significant structural changes, and are thought to be composed of inserted isomers, consistent with recent electronic spectroscopy experiments.

Infrared multiple photon dissociation spectra of V⁺(H₂O)_n depend on experiment conditions, with strong kinetic shift effects for large clusters.

Efficient Formation of Size-Selected Clusters upon Pickup of Dopants into Multiply Charged Helium Droplets

Properties of clusters often depend critically on the exact number of atomic or molecular building blocks, however, most methods of cluster formation lead to a broad, size distribution and cluster intensity anomalies that are often designated as magic numbers. Here we present a novel approach of breeding size-selected clusters via pickup of dopants into multiply charged helium nanodroplets. The size and charge state of the initially undoped droplets and the vapor pressure of the dopant in the pickup region, determines the size of the dopant cluster ions that are extracted from the host droplets, via evaporation of the helium matrix in a collision cell filled with room temperature helium or via surface collisions. Size distributions of the selected dopant cluster ions are determined utilizing a high-resolution time of flight mass spectrometer. The comparison of the experimental data, with simulations taking into consideration the pickup probability into a shrinking He droplet due to evaporation during the pickup process, provides a simple explanation for the emergence of size distributions that are narrower than Poisson.

Cyclotrimerization of Acetylene under Thermal Conditions: Gas-Phase Kinetics of V+ and Fe+ + C2H2

The kinetics of successive reactions of acetylene (C₂H₂) initiated on either vanadium or iron atomic cations have been investigated under thermal conditions using the variable-ion source and temperature-adjustable selected-ion flow tube apparatus. Consistent with the literature results, the reaction of Fe⁺ + C₂H₂ primarily yields Fe⁺(m/z = (C₂H₂)₃); however, analysis via quantum chemical calculations and statistical modeling shows that the mechanism does not form benzene upon the third acetylene addition. The kinetics are more consistent with successive addition of three acetylene molecules, yielding Fe⁺(C₂H₂)₃, followed by an addition of a fourth acetylene molecule, initiating cyclotrimerization, yielding either Fe⁺(C₂H₂) + neutral benzene or Fe⁺(Bz) + acetylene, where Bz is a benzene ligand. In contrast, the reaction of V⁺ + C₂H₂ yields products via successive associations V⁺(m/z = (C₂H₂)_n) either with or without a bimolecular step involving loss of one H₂ and V⁺C₂(m/z = (C₂H₂)_m), where n and m extend at least up to 11 under conditions of 0.32 Torr at 300 K. Stabilized V⁺(Bz) is not a significant intermediate in the association mechanism. We propose a plausible mechanism for the generation of neutral benzene in this reaction and compare with the Fe⁺ results. The reaction steps that produce benzene result in turnover of the single-atom catalyst, and the large hydrocarbons produced that remain associated to the catalyst are proposed to be polycyclic aromatic hydrocarbons.

Thiolate-Protected Metal Nanoclusters: Recent Development in Synthesis, Understanding of Reaction, and Application in Energy and Environmental Field

Metal nanoclusters (NCs), which are composed of about 250 or fewer metal atoms, possess great potential as novel functional materials. Fundamental research on metal NCs gradually started in the 1960s, and since 2000, thiolate (SR)-protected metal NCs have been the main metal NCs actively studied. The precise and systematic isolation of SR-protected metal NCs has been achieved in 2005. Since then, research on SR-protected metal NCs for both basic science and practical application has rapidly expanded. This review describes this recent progress in the field of SR-protected metal NCs in three areas: synthesis, understanding, and application. Specifically, the recent study of alloy NCs and connected structures composed of NCs is highlighted in the "synthesis" section, recent knowledge on the reactivity of NCs in solution is highlighted in the "understanding" section, and the applications of NCs in the energy and environmental field are highlighted in the "application" section. This review provides insight on the current state of research on SR-protected metal NCs and discusses the challenges to be overcome for further development in this field as well as the possibilities that these materials can contribute to solving the problems facing modern society.

Vapor-phase production of nanomaterials

The synthesis of nanomaterials, with characteristic dimensions of 1 to 100 nm, is a key component of nanotechnology. Vapor-phase synthesis of nanomaterials has numerous advantages such as high product purity, high-throughput continuous operation, and scalability that have made it the dominant approach for the commercial synthesis of nanomaterials. At the same time, this class of methods has great potential for expanded use in research and development. Here, we present a broad review of progress in vapor-phase nanomaterial synthesis. We describe physically-based vapor-phase synthesis methods including inert gas condensation, spark discharge generation, and pulsed laser ablation; plasma processing methods including thermal- and non-thermal plasma processing; and chemically-based vapor-phase synthesis methods including chemical vapor condensation, flame-based aerosol synthesis, spray pyrolysis, and laser pyrolysis. In addition, we summarize the nanomaterials produced by each method, along with representative applications, and describe the synthesis of the most important materials produced by each method in greater detail.

Asymmetric Solvation of the Zinc Dimer Cation Revealed by Infrared Multiple Photon Dissociation Spectroscopy of Zn2+(H2O)n (n = 1-20)

Investigating metal-ion solvation—in particular, the fundamental binding interactions—enhances the understanding of many processes, including hydrogen production via catalysis at metal centers and metal corrosion. Infrared spectra of the hydrated zinc dimer (Zn₂⁺(H₂O)_n; n = 1–20) were measured in the O–H stretching region, using infrared multiple photon dissociation (IRMPD) spectroscopy. These spectra were then compared with those calculated by using density functional theory. For all cluster sizes, calculated structures adopting asymmetric solvation to one Zn atom in the dimer were found to lie lower in energy than structures adopting symmetric solvation to both Zn atoms. Combining experiment and theory, the spectra show that water molecules preferentially bind to one Zn atom, adopting water binding motifs similar to the Zn⁺(H₂O)_n complexes studied previously. A lower coordination number of 2 was observed for Zn₂⁺(H₂O)₃, evident from the highly red-shifted band in the hydrogen bonding region. Photodissociation leading to loss of a neutral Zn atom was observed only for n = 3, attributed to a particularly low calculated Zn binding energy for this cluster size.

IR Spectroscopic Characterization of H2 Adsorption on Cationic Cun+ (n = 4-7) Clusters

IR spectra of cationic copper clusters Cu_n⁺ (n = 4–7) complexed with hydrogen molecules are recorded via IR multiple-photon dissociation (IRMPD) spectroscopy. To this end, the copper clusters are generated via laser ablation and reacted with H₂ and D₂ in a flow-tube-type reaction channel. The complexes formed are irradiated using IR light provided by the free-electron laser for intracavity experiments (FELICE). The spectra are interpreted by making use of isotope-induced shifts of the vibrational bands and by comparing them to density functional theory calculated spectra for candidate structures. The structural candidates have been obtained from global sampling with the minima hopping method, and spectra are calculated at the semilocal (PBE) and hybrid (PBE0) functional level. The highest-quality spectra have been recorded for [5Cu, 2H/2D]⁺, and we find that the semilocal functional provides better agreement for the lowest-energy isomers. The interaction of hydrogen with the copper clusters strongly depends on their size. Binding energies are largest for Cu₅⁺, which goes hand in hand with the observed predominantly dissociative adsorption. Due to smaller binding energies for dissociated H₂ and D₂ for Cu₄⁺, also a significant amount of molecular adsorption is observed as to be expected according to the Evans–Polanyi principle. This is confirmed by transition-state calculations for Cu₄⁺ and Cu₅⁺, which show that hydrogen dissociation is not hindered by an endothermic reaction barrier for Cu₅⁺ and by a slightly endothermic barrier for Cu₄⁺. For Cu₆⁺ and Cu₇⁺, it was difficult to draw clear conclusions because the IR spectra could not be unambiguously assigned to structures.

STARGATE: A new instrument for high-resolution photodissociation spectroscopy of cold ionic species

Spectroscopy of transient anions and radicals by gated and accelerated time-of-flight experiment is a new spectrometer developed in UCLouvain. This instrument measures high-resolution photodissociation spectra of mass-selected ions by the combination of a time-of-flight spectrometer including a specific gating, bunching, and re-referencing unit with a nanosecond pulsed dye laser, a pulsed deflection, and an energy selector. The ionic species are generated in a supersonic jet expansion by means of an electric discharge or by the impact of electrons coming from an electron gun. The versatility of the molecular systems that can be addressed by this instrument is illustrated by the presentation of mass spectra of cations, anions, and ionic clusters formed from different gas mixtures and backing pressures. The high-resolution spectrum of the A~²Σ⁺(002)←X~²Π_3/2(000) and A~²Σ⁺(002)←X~²Π_1/2(000) rovibronic bands of N₂O⁺ has been measured and analyzed to provide refined molecular parameters in the A~²Σ⁺(002) upper state. The A~²Σ⁺(002)←X~²Π_3/2(000) band has been used to evaluate the quality of the experimental setup in terms of rotational temperature, time of measurement for certain signal to noise ratio, and the accuracy of the determination of the wavenumber scale.

A supersonic laser ablation beam source with narrow velocity spreads

A supersonic beam source for SrF and BaF molecules is constructed by combining the expansion of carrier gas (a mixture of 2% SF₆ and 98% argon) from an Even-Lavie valve with laser ablation of a barium/strontium metal target at a repetition rate of 10 Hz. Molecular beams with a narrow translational velocity spread are produced at relative values of Δv/v = 0.053(11) and 0.054(9) for SrF and BaF, respectively. The relative velocity spread of the beams produced in our source is lower in comparison with the results from other metal fluoride beams produced in supersonic laser ablation sources. The rotational temperature of BaF is measured to be 3.5 K. The source produces 6 × 10⁸ and 10⁷ molecules per steradian per pulse in the X²Σ⁺ (ν = 0, N = 1) state of BaF and SrF molecules, respectively, a state amenable to Stark deceleration and laser cooling.

Microsolvation of Zn cations: infrared multiple photon dissociation spectroscopy of Zn+(H2O)n (n = 2-35)

The structures, along with solvation evolution, of size-selected Zn⁺(H₂O)_n (n = 2-35) complexes have been determined by combining infrared multiple photon photodissociation (IRMPD) spectroscopy and density functional theory. The infrared spectra were recorded in the O-H stretching region, revealing varying shifts in band position due to different water binding motifs. Concordant with previous studies, a coordination number of 3 is observed, determined by the sudden appearance of a broad, red-shifted band in the hydrogen bonding region for clusters n > 3. The coordination number of 3 seems to be retained even for the larger clusters, due to incoming ligands experiencing significant repulsion from the Zn⁺ valence 4s electron. Evidence of spectrally distinct single- and double-acceptor sites are presented for medium-sized clusters, 4 ≤n≤ 7, however for larger clusters, n≥ 8, the hydrogen bonding region is dominated by a broad, unresolved band, indicative of the increased number of second and third coordination sphere ligands. No evidence of a solvated, six-fold coordinated Zn²⁺ ion/solvated electron pair is present in the spectra.

Observation of Carbon-Carbon Coupling Reaction in Neutral Transition-Metal Carbonyls

Neutral titanium-metal carbonyl complexes with the chemical formula Ti(CO)_n (n = 4-7) are produced in the gas phase by the reactions of titanium atoms with carbon monoxide in a pulsed laser vaporization-supersonic expansion source. Their infrared absorption spectra in the carbonyl stretching frequency region are measured by infrared plus vacuum ultraviolet (IR+VUV) two-color ionization spectroscopy based on a tunable VUV free electron laser. Infrared spectroscopy in conjunction with quantum chemical calculations confirm that all of these complexes have unexpected titanium ketenylidene OTiCCO(CO)_n-2 structures. Bonding analysis indicates that the OTiCCO core structure can be described by the bonding interactions between a TiO⁺ cation in the doublet ground state and a doublet ground state of CCO^-. The results reveal that the C-O bond breaking and C-C bond formation proceed efficiently in the reactions between laser-vaporized titanium atoms and carbon monoxide.

Carbon Monoxide Activation on Small Iron Magnetic Cluster Surfaces, FenCO, n = 1-20. A Theoretical Approach

The chemical activation of the carbon monoxide (CO) molecule on the surface of iron clusters Fe_n (n = 1-20) is studied in this work. By means of density functional theory (DFT) all-electron calculations, we have found that the adsorption of CO over the bare magnetic Fe_n (n = 1-20) clusters is thermochemically favorable. The Fe_n-CO interaction increases the C-O bond length, from 1.128 ± 0.014 Å, for isolated CO, up to 1.251 Å, for Fe₉CO. Also, the calculated wavenumbers associated with the stretching modes ν_CO are decreased, or red-shifted, as another indicator of the CO bond weakening, passing from 2099 ± 4 to 1438 cm^-1. Markedly, wavenumbers of vibrational modes ν_CO agree admirably well in comparison with experimental results reported for Fe_nCO (n = 1, 18-20), getting small errors below 2.6%. The C-O bond is enlarged on the Fe_nCO (n = 1-20) composed systems, as the CO molecule increases its bonding, charge transference, and coordination with the iron cluster. Therefore, small bare iron particles Fe_n (n = 1-20) can be proposed to promote the CO dissociation, especially Fe₉CO, which has been proven to obtain the most prominent activation of the strong C-O bond by means of the charge transference from the metal core.