Coverage‐dependent dipole coupling for carbon monoxide adsorbed at ordered platinum(111)‐aqueous interfaces: Structural and electrochemical implications

Enhanced oxygen reduction reaction on caffeine-modified platinum single-crystal electrodes

Enhancing the activity of the oxygen reduction reaction (ORR) is crucial for fuel cell development, and hydrophobic species are known to increase the ORR activity. This paper reports that caffeine enhanced the specific ORR activity of Pt(111) 11-fold compared to that without caffeine in a 0.1 M HClO4 aqueous solution. Moreover, caffeine increased the ORR activity of Pt(110) 2.5-fold; however, the activity of Pt(100) was unaffected. The infrared (IR) band of PtOH (blocking species of the ORR) decreased for all the surfaces. Caffeine was adsorbed with its molecular plane perpendicular to the Pt(111) and Pt(110) surfaces and tilted relative to the Pt(100) surface. Thus, the effects of caffeine on the ORR activity can be rationalized by a decrease in PtOH coverage and the difference in adsorption geometry of caffeine.

Metal nanoparticles supported on a nonconductive oxide undergo pH-dependent spontaneous polarization

Electrochemical polarization, which often plays a critical role in driving chemical reactions at solid-liquid interfaces, can arise spontaneously through the exchange of ions and/or electrons across the interface. However, the extent to which such spontaneous polarization prevails at nonconductive interfaces remains unclear because such materials preclude measuring and controlling the degree of interfacial polarization via standard (i.e., wired) potentiometric methods. Herein, we circumvent the limitations of wired potentiometry by applying infrared and ambient pressure X-ray photoelectron spectroscopies (AP-XPS) to probe the electrochemical potential of nonconductive interfaces as a function of solution composition. As a model class of macroscopically nonconductive interfaces, we specifically probe the degree of spontaneous polarization of ZrO₂-supported Pt and Au nanoparticles immersed in aqueous solutions of varying pH. Shifts in the Pt-adsorbed CO vibrational band position evince electrochemical polarization of the Pt/ZrO₂-water interface with changing pH, and AP-XPS reveals quasi-Nernstian shifts of the electrochemical potential of Pt and Au with pH in the presence of H₂. These results indicate that spontaneous proton transfer via equilibrated H⁺/H₂ interconversion spontaneously polarizes metal nanoparticles even when supported on a nonconductive host. Consequently, these findings indicate that solution composition (i.e., pH) can be an effective handle for tuning interfacial electrical polarization and potential at nonconductive interfaces.

Influence of interfacial water and cations on the oxidation of CO at the platinum/ionic liquid interface

CO oxidation is fundamental to the development of new catalyst materials for fuel cells and key for complete oxidation of small alcohols like methanol or ethanol on Pt catalysts. So far, room-temperature ionic liquids (RTIL) have been used to modify the selectivity and activity in electrocatalysis. In order to understand the mechanism of CO oxidation in RTIL in more detail we have investigated this reaction at the Pt(111)/1-butyl-3-methylimidazolium trifluorosulfonylimide [BMIM][NTf₂] electrode/electrolyte interface as a function of H₂O concentration and electrode potential with in situ sum-frequency generation (SFG) spectroscopy and infrared absorption spectroscopy (IRAS). Using SFG spectroscopy, we address the changes of linearly bonded CO molecules on Pt(111), while we monitor the changes in the bulk electrolyte with IRAS through vibrational bands from H₂O, CO₂ and CO. The presence of water in [BMIM][NTf₂] shifts the onset potential for CO oxidation by more than 200 mV when the water concentration is increased from 0.01 to 1.5 M, which we relate to the incorporation and the availability of water at the electrode/electrolyte interface. The nature of the RTIL cation has also a large effect on the surface excess of H₂O since RTILs like [BMMIM][NTf₂] and [BMPyrr][NTf₂] which are prone to form closed-packed structures, can block the incorporation of water and lead to more sluggish CO oxidation with larger overpotentials and oxidation in a much wider potential range for which we provide evidence by additional SFG measurements. These results clearly show that the choice of the RTIL is important for CO oxidation on Pt(111) electrode surfaces - an observation that is likely highly relevant also to other catalysts and catalytic reactions that require the presence of interfacial water.

Engineering gold-platinum core-shell nanoparticles by self-limitation in solution

Core-shell particles with thin noble metal shells represent an attractive material class with potential for various applications ranging from catalysis to biomedical and pharmaceutical applications to optical crystals. The synthesis of well-defined core-shell architectures remains, however, highly challenging. Here, we demonstrate that atomically-thin and homogeneous platinum shells can be grown via a colloidal synthesis method on a variety of gold nanostructures ranging from spherical nanoparticles to nanorods and nanocubes. The synthesis is based on the exchange of low binding citrate ligands on gold, the reduction of platinum and the subsequent kinetically hindered growth by carbon monoxide as strong binding ligand. The prerequisites for homogeneous growth are low core-binding ligands with moderate fast ligand exchange in solution, a mild reducing agent to mitigate homonucleation and a strong affinity of a second ligand system that can bind to the shell's surface. The simplicity of the described synthetic route can potentially be adapted to various other material libraries to obtain atomically smooth core-shell systems.

Bridge Sites of Au Surfaces Are Active for Electrocatalytic CO2 Reduction

Prior in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) studies of electrochemical CO2 reduction catalyzed by Au, one of the most selective and active electrocatalysts to produce CO from CO2, suggest that the reaction proceeds solely on the top sites of the Au surface. This finding is worth updating with an improved spectroelectrochemical system where in situ IR measurements can be performed under real reaction conditions that yield high CO selectivity. Herein, we report the preparation of an Au-coated Si ATR crystal electrode with both high catalytic activity for CO2 reduction and strong surface enhancement of IR signals validated in the same spectroelectrochemical cell, which allows us to probe the adsorption and desorption behavior of bridge-bonded *CO species (*COB). We find that the Au surface restructures irreversibly to give an increased number of bridge sites for CO adsorption within the initial tens of seconds of CO2 reduction. By studying the potential-dependent desorption kinetics of *COB and quantifying the steady-state surface concentration of *COB under reaction conditions, we further show that *COB are active reaction intermediates for CO2 reduction to CO on this Au electrode. At medium overpotential, as high as 38% of the reaction occurs on the bridge sites.

In Situ Raman Observation of Oxygen Activation and Reaction at Platinum-Ceria Interfaces during CO Oxidation

Understanding the fundamental insights of oxygen activation and reaction at metal-oxide interfaces is of significant importance yet remains a major challenge due to the difficulty in in situ characterization of active oxygen species. Herein, the activation and reaction of molecular oxygen during CO oxidation at platinum-ceria interfaces has been in situ explored using surface-enhanced Raman spectroscopy (SERS) via a borrowing strategy, and different active oxygen species and their evolution during CO oxidation at platinum-ceria interfaces have been directly observed. In situ Raman spectroscopic evidence with isotopic exchange experiments demonstrate that oxygen is efficiently dissociated to chemisorbed O on Pt and lattice Ce-O species simultaneously at interfacial Ce³⁺ defect sites under CO oxidation, leading to a much higher activity at platinum-ceria interfaces compared to that at Pt alone. Further in situ time-resolved SERS studies and density functional theory simulations reveal a more efficient molecular pathway through the reaction between adsorbed CO and chemisorbed Pt-O species transferred from the interfaces. This work deepens the fundamental understandings on oxygen activation and CO oxidation at metal-oxide interfaces and offers a sensitive technique for the in situ characterization of oxygen species under working conditions.

Spontaneous Electric Fields Play a Key Role in Thermochemical Catalysis at Metal-Liquid Interfaces

Large oriented electric fields spontaneously arise at all solid-liquid interfaces via the exchange of ions and/or electrons with the solution. Although intrinsic electric fields are known to play an important role in molecular and biological catalysis, the role of spontaneous polarization in heterogeneous thermocatalysis remains unclear because the catalysts employed are typically disconnected from an external circuit, which makes it difficult to monitor or control the degree of electrical polarization of the surface. Here, we address this knowledge gap by developing general methods for wirelessly monitoring and controlling spontaneous electrical polarization at conductive catalysts dispersed in liquid media. By combining electrochemical and spectroscopic measurements, we demonstrate that proton and electron transfer from solution controllably, spontaneously, and wirelessly polarize Pt surfaces during thermochemical catalysis. We employ liquid-phase ethylene hydrogenation on a Pt/C catalyst as a thermochemical probe reaction and observe that the rate of this nonpolar hydrogenation reaction is significantly influenced by spontaneous electric fields generated by both interfacial proton transfer in water and interfacial electron transfer from organometallic redox buffers in a polar aprotic ortho-difluorobenzene solvent. Across these vastly disparate reaction media, we observe quantitatively similar scaling of ethylene hydrogenation rates with the Pt open-circuit electrochemical potential (E OCP). These results isolate the role of interfacial electrostatic effects from medium-specific chemical interactions and establish that spontaneous interfacial electric fields play a critical role in liquid-phase heterogeneous catalysis. Consequently, E OCP-a generally overlooked parameter in heterogeneous catalysis-warrants consideration in mechanistic studies of thermochemical reactions at solid-liquid interfaces, alongside chemical factors such as temperature, reactant activities, and catalyst structure. Indeed, this work establishes the experimental and conceptual foundation for harnessing electric fields to both elucidate surface chemistry and manipulate preparative thermochemical catalysis.

The Role of Tungsten Oxide in Enhancing the Carbon Monoxide Tolerance of Platinum-Based Hydrogen Oxidation Catalysts

Significant reductions in total cost of ownership can be realized by engineering PEM fuel cells to run on low-purity hydrogen. One of the main drawbacks of low-purity hydrogen fuels is the carbon monoxide fraction, which poisons platinum electrocatalysts and reduces the power output below useful levels. Platinum-tungsten oxide catalyst systems have previously shown high levels of CO tolerance during both ex situ and in situ investigations. In this work, we explore the mechanism of enhanced tolerance using in situ electrochemical attenuated total reflection-infrared (ATR-IR) and Raman spectroscopy methods and investigate, using a mixture of Pt/C and WO₃ powders, the role of the W^V/W^VI redox couple in the oxidation of adsorbed CO.

Electron density topological and adsorbate orbital analyses of water and carbon monoxide co-adsorption on platinum

The electron density topology of carbon monoxide (CO) on dry and hydrated platinum is evaluated under the quantum theory of atoms in molecules (QTAIM) and by adsorbate orbital approaches. The impact of water co-adsorbate on the electronic, structural, and vibrational properties of CO on Pt are modelled by periodic density functional theory (DFT). At low CO coverage, increased hydration weakens C-O bonds and strengthens C-Pt bonds, as verified by changes in bond lengths and stretching frequencies. These results are consistent with QTAIM, the 5σ donation-2π^* backdonation model, and our extended π-attraction σ-repulsion model (extended π-σ model). This work links changes in the non-zero eigenvalues of the electron density Hessian at QTAIM bond critical points to changes in the π and σ C-O bonds with systematic variation of CO/H₂O co-adsorbate scenarios. QTAIM invariably shows bond strengths and lengths as being negatively correlated. For atop CO on hydrated Pt, QTAIM and phenomenological models are consistent with a direct correlation between C-O bond strength and CO coverage. However, DFT modelling in the absence of hydration shows that C-O bond lengths are not negatively correlated to their stretching frequencies, in contrast to the Badger rule: When QTAIM and phenomenological models do not agree, the use of the non-zero eigenvalues of the electron density Hessian as inputs to the phenomenological models, aligns them with QTAIM. The C-O and C-Pt bond strengths of bridge and three-fold bound CO on dry and hydrated platinum are also evaluated by QTAIM and adsorbate orbital analyses.

Unraveling the Nature of Active Sites in Ethanol Electro-oxidation by Site-Specific Marking of a Pt Catalyst with Isotope-Labeled 13CO

This works deals with the identification of preferential site-specific activation at a model Pt surface during a multiproduct reaction. The (110)-type steps of a Pt(332) surface were selectively marked by attaching isotope-labeled ¹³CO molecules to them, and ethanol oxidation was probed by in situ Foureir transfrom infrared spectroscopy in order to precisely determine the specific sites at which CO₂, acetic acid, and acetaldehyde were preferentially formed. The (110) steps were active for splitting the C-C bond, but unexpectedly, we provide evidence that the pathway of CO₂ formation was preferentially activated at (111) terraces, rather than at (110) steps. Acetaldehyde was formed at (111) terraces at potentials comparable to those for CO₂ formation also at (111) terraces, while the acetic acid formation pathway became active only when the (110) steps were released by the oxidation of adsorbed ¹³CO, at potentials higher than for the formation of CO₂ at (111) terraces of the stepped surface.

Electrochemical CO Oxidation at Platinum on Carbon Studied through Analysis of Anomalous in Situ IR Spectra

The oxidation of adsorbed CO is a key reaction in electrocatalysis. It has been studied extensively on both extended model surfaces and on nanoparticles; however, correlation between the two is far from simple. Molecular insight into the reaction is often provided using in situ IR spectroscopy; however, practical challenges mean in situ studies on nanoparticles have yet to provide the same level of detail as those on model surfaces. Here we use a new approach to in situ IR spectroscopy to study the mechanism of CO adlayer oxidation on a commercial carbon-supported Pt catalyst. We observe bipolar IR absorption bands but develop a simple model to enable fitting. Quantitative analysis of band behavior during the oxidation prepeak using the model agrees well with previous analysis based on conventional absorption bands. A second linear CO band is observed during the main oxidation region and is assigned to the distinct contribution of CO on step as opposed to terrace sites. Analysis of the step and terrace CO bands during oxidation shows that oxidation begins on the terraces of the nanoparticles before CO on steps is removed. Further correlation of this behavior with the current shows that step CO is only lost in the first of the two main oxidation peaks.

Mobility and Oxidation of Adsorbed CO on Shape-Controlled Pt Nanoparticles in Acidic Medium

The knowledge about how CO occupies and detaches from specific surface sites on well-structured Pt surfaces provides outstanding information on both dynamics/mobility of CO_ads and oxidation of this molecule under electrochemical conditions. This work reports how the potentiostatic growth of different coverage CO adlayers evolves with time on both cubic and octahedral Pt nanoparticles in acidic medium. Data suggest that during the growth of the CO adlayer, CO_ads molecules slightly shift toward low coordination sites only on octahedral Pt nanoparticles, so that these undercoordinated sites are the first filled on octahedral Pt nanoparticles. Conversely, on cubic Pt nanoparticles, adsorbed CO behaves as an immobile species, and low coordinated sites as well as (100) terraces are apparently filled uniformly and simultaneously. However, once the adlayer is complete, irrespectively of whether the CO is oxidized in a single step or in a sequence of different potential steps, results suggest that CO_ads behaves as an immobile species during its oxidation on both octahedral and cubic Pt nanoparticles.

Ligand effect of SnO2 on a Pt–Ru catalyst and the relationship between bond strength and CO tolerance

Pt–Ru/SnO₂/C catalysts were prepared by a rapid quenching method.

A comparative study of CO adsorption on tetrahexahedral Pt nanocrystals and interrelated Pt single crystal electrodes by using cyclic voltammetry and in situ FTIR spectroscopy

This study focuses on CO adsorption at tetrahexahedral Pt nanocrystals (THH Pt NCs) by using cyclic voltammetry and in situ FTIR spectroscopy. Since the electrochemically prepared THH Pt NCs in this study are enclosed by {730} facets which could be considered by a subfacet configuration of 2{210} + {310}, we have also studied CO adsorption on the interrelated Pt(310) and Pt(210) single crystal electrodes as a comparison. Cyclic voltammetry results demonstrated that CO adsorbs dominantly on the (100) sites of THH Pt NCs at low CO coverage (θ(CO)≤ 0.135), while on both (100) and (110) sites at higher CO coverage. On ordered Pt(310) and Pt(210), i.e. they were flame annealed and then cooled in H(2) + Ar, CO adsorption also illustrates relative priority on (100) sites at low CO coverage; while at high CO coverage or on oxygen-disordered Pt(310) and Pt(210) when they were cooled in air after flame annealing, the adsorption of CO presents a weak preference on (100) sites of Pt(310) and even no preference at all on (100) sites of Pt(210). In situ FTIR spectroscopic studies illustrated that CO adsorption on THH Pt NCs yields anomalous infrared effects (AIREs), which are depicted by the Fano-like IR feature on a dense distribution (60 μm(-2)) and the enhancement of abnormal IR absorption on a sparse distribution (22 μm(-2)) of THH Pt NCs on glassy carbon substrate. Systematic investigation of CO coverage dependence of IR features revealed that, on THH Pt NCs, the IR band center (ν(COL)) of linearly bonded CO (COL) is rapidly shifted to higher wavenumbers along with the increase of CO coverage to 0.184, yielding a fast linear increase rate with a high slope (dν(COL)/dθ(IR)(CO) = 219 cm(-1)); when θ > 0.184, the increase of ν(COL) with θCO slows down and deviates drastically from linearity. In contrast, the ν(COL) on the ordered Pt(310) electrode maintains a linear increase with θ(IR)(CO) for the whole range of θ(IR)(CO) variation, and gives a much smaller increase rate of slope 74.3 cm(-1). The significant differences in CO adsorption behavior on THH Pt NCs and on interrelated Pt single crystal planes demonstrated clearly the unique properties of nanoparticles enclosed by high-index facets.

Adsorption and oxidation of formaldehyde on a polycrystalline Pt film electrode: An in situ IR spectroscopy search for adsorbed reaction intermediates

As part of a mechanistic study of the electrooxidation of C1 molecules we have systematically investigated the dissociative adsorption/oxidation of formaldehyde on a polycrystalline Pt film electrode under experimental conditions optimizing the chance for detecting weakly adsorbed reaction intermediates. Employing in situ IR spectroscopy in an attenuated total reflection configuration (ATR-FTIRS) with p-polarized IR radiation to further improve the signal-to-noise ratio, and using low reaction temperatures (3 °C) and deuterium substitution to slow down the reaction kinetics and to stabilize weakly adsorbed reaction intermediates, we could detect an IR absorption band at 1660 cm(-1) characteristic for adsorbed formyl intermediates. This assignment is supported by an isotope shift in wave number. Effects of temperature, potential and deuterium substitution on the formation and disappearance of different adsorbed species (COad, adsorbed formate, adsorbed formyl), are monitored and quantified. Consequences on the mechanism for dissociative adsorption and oxidation of formaldehyde are discussed.

The kinetics of CO pathway in methanol oxidation at Pt electrodes, a quantitative study by ATR-FTIR spectroscopy

Methanol (MeOH) oxidation reaction (MOR) at Pt electrodes under potentiostatic conditions has been investigated by electrochemical in situ FTIR spectroscopy (FTIRS) in attenuated-total-reflection configuration under controlled flow conditions in 0.1 M HClO(4) with 2 M MeOH, where the mass transport effects are largely eliminated using a flow cell. Our results reveal that (i) at constant potentials, the methanol dehydrogenation rate decreases while the CO(ad) oxidation rate increases with the accumulation of CO(ad) until the maximum CO(ad) coverage (ca. 0.5 ML i.e., the steady state) is reached; (ii) at fixed CO(ad) coverage, the rates for MeOH decomposition to CO(ad) and CO(ad) oxidation increases with potential from 0.3 to 0.7 V (vs. RHE), with Tafel slopes for MeOH dehydrogenation of ca. 440 ± 30 mV/dec, which is independent of CO(ad) coverage; (iii) the current efficiency of the CO pathway in MOR at 0.6 and 0.7 V is below 20% and it decreases toward higher potentials. The mechanisms as well as the potential induced change in the kinetics of different pathways involved in MOR are briefly discussed.