Stabilities and structures of gas phase MgO clusters

Theoretical Rotational and Vibrational Spectral Data for the Hypermagnesium Oxide Species Mg2O and Mg2O. Chemphyschem 2024:e202400479. [PMID: 38801234 DOI: 10.1002/cphc.202400479] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

While magnesium is astronomically observed in small molecules, it largely serves as a contributor to silicate grains, though how these grains form is not well-understood. The smallest hypermagnesium oxide compounds (Mg2 ${{}_{2}}$ O/Mg2 ${{}_{2}}$ O+ ${{}^{+}}$ ) may play a role in silicate formation, but little vibrational reference data exist. As such, anharmonic spectroscopic data are computed forX ˜ 1 Σ g + ${{{\tilde{\rm {X}}}}^1 {\rm{\Sigma }}_g^+ }$ Mg2 ${{}_{2}}$ O,a ˜ 1 Σ u + ${{{\tilde{\rm {a}}}}^1 {\rm{\Sigma }}_u^+ }$ Mg2 ${{}_{2}}$ O, andX ˜ 2 Σ g + ${{{\tilde{\rm {X}}}}^2 {\rm{\Sigma }}_g^+ }$ Mg2 ${{}_{2}}$ O+ ${{}^{+}}$ using quartic force fields (QFFs). Explicitly-correlated coupled-cluster QFFs for the neutral species perform well, implying that full multireference treatment may not be necessary for such systems if enough electron correlation is included. Equation-of-motion ionization potential (EOMIP) methods forX ˜ 2 Σ g + ${{{\tilde{\rm {X}}}}^2 {\rm{\Sigma }}_g^+ }$ Mg2 ${{}_{2}}$ O+ ${{}^{+}}$ QFFs circumvent previous symmetry breaking issues even in explicitly-correlated coupled-cluster results, motivating the need for EOMIP treatments at minimum for such systems. All three species are found to have high-intensity vibrational frequencies. Even so, the highly intense frequency (X ˜ 1 Σ g + ${{{\tilde{\rm {X}}}}^1 {\rm{\Sigma }}_g^+ }$ Mg2 ${{}_{2}}$ O: 894.7 cm-1/11.18 μm;a ˜ 1 Σ u + ${{{\tilde{\rm {a}}}}^1 {\rm{\Sigma }}_u^+ }$ Mg2 ${{}_{2}}$ O: 915.0 cm-1/10.91 μm) for either neutral state may be astronomically obscured by the polycyclic aromatic hydrocarbon 11.2 μm band. Mg2 ${{}_{2}}$ O+ ${{}^{+}}$ may be less susceptible to such obfuscation, and itsν 1 ${{\nu }_{1}}$ intensity is computed to be a massive 4793 km mol-1.

Electronic structure and physicochemical properties of the metal and semimetal oxide nanoclusters

Clusters are physical entities composed of a few to thousands of atoms with capabilities to develop novel materials, like cluster-assembled materials. In this sense, knowing the electronic structure and physicochemical properties of the isolated clusters can be useful to understand how they interact with other chemical species by intermolecular forces, as free, embedded, and saturated clusters, and by intramolecular forces, acting as support clusters. In this way, in the present work, the electronic structure and physicochemical properties of metal oxide nanoclusters (MgO, Al₂O₃, SiO₂, and TiO₂) were studied by highly correlated molecular quantum chemistry methods. Through the electronic state's characterization, a semiconductor aspect was found for the titania oxide nanocluster (T_e < 0.8 eV) while the other agglomerates showed a characteristic of insulating material (T_e > 3.3 eV). From the stability index, the following stability order can be characterized: (SiO₂)₄ > (Al₂O₃)₄ > (MgO)₄ > (TiO₂)₃. Initial information of intermolecular and intramolecular forces caused by the studied clusters was calculated through the relative electrophilicity index, which classified the (MgO)₄ and (TiO₂)₃ clusters as the more reactive ones, in which the (MgO)₄ cluster was identified as a nucleophilic species, while the (TiO₂)₃ cluster as an electrophilic molecule.

Mg12O12 and Be12O12 Nanocages as Sorbents and Sensors for H2S and SO2 Gases: A Theoretical Approach

Theoretical calculations based on the Density Functional Theory (DFT) have been performed to investigate the interaction of H₂S as well SO₂ gaseous molecules at the surfaces of Be₁₂O₁₂ and Mg₁₂O₁₂ nano-cages. The results show that a Mg₁₂O₁₂ nano-cage is a better sorbent than a Be₁₂O₁₂ nano-cage for the considered gases. Moreover, the ability of SO₂ gas to be adsorbed is higher than that of H₂S gas. The HOMO–LUMO gap (E_g) of Be₁₂O₁₂ nano-cage is more sensitive to SO₂ than H₂S adsorption, while the E_g value of Mg₁₂O₁₂ nano-cage reveals higher sensitivity to H₂S than SO₂ adsorption. The molecular dynamic calculations show that the H₂S molecule cannot be retained at the surface of a Be₁₂O₁₂ nano-cage within 300–700 K and cannot be retained on a Mg₁₂O₁₂ nano-cage at 700 K, while the SO₂ molecule can be retained at the surfaces of Be₁₂O₁₂ and Mg₁₂O₁₂ nano-cages up to 700 K. Moreover, the thermodynamic calculations indicate that the reactions between H₂S as well SO₂ with Be₁₂O₁₂ and Mg₁₂O₁₂ nano-cages are exothermic. Our results suggest that we can use Be₁₂O₁₂ and Mg₁₂O₁₂ nano-cages as sorbents as well as sensors for H₂S and SO₂ gases.

A Theoretical Framework of Zinc-Decorated Inorganic Mg12O12 Nanoclusters for Efficient COCl2 Adsorption: A Step Forward toward the Development of COCl2 Sensing Materials

Gas sensors are widely explored due to their remarkable detection efficiency for pollutants. Phosgene is a toxic gas and its high concentration in the environment causes some serious health problems like swollen throat, a change in voice, late response of nervous systems, and many more. Therefore, the development of sensors for quick monitoring of COCl2 in the environment is the need of the time. In this aspect, we have explored the adsorption behavior of late transition metal-decorated Mg12O12 nanoclusters for COCl2. Density functional theory at the B3LYP/6-31G(d,p) level is used for optimization, frontier molecular orbital analysis, dipole moment, natural bonding orbitals, bond lengths, adsorption energies, and global reactivity descriptor analysis. Decoration of Zn on pure Mg12O12 delivered two geometries named as Y1 and Y2 with adsorption energy values of -388.91 and -403.11 kJ/mol, respectively. Adsorption of COCl2 on pure Mg12O12 also delivered two geometries (X1 and X2) with different orientations of COCl2. The computed adsorption energy values of X1 and X2 are -44.92 and -71.32 kJ/mol. However, adsorption of COCl2 on Zn-decorated Mg12O12 offered two geometries named as Z1 and Z2 with adsorption energy values of -455.22 and -419.04 kJ/mol, respectively. These adsorption energy values suggested that Zn decoration significantly enhances the adsorption capability of COCl2 gas. Further, the narrow band gap and large dipole moment values of COCl2-adsorbed Zn-decorated Mg12O12 nanoclusters suggested that designed systems are efficient candidates for COCl2 adsorption. Global reactivity indices unveil the great natural stability and least reactivity of designed systems. Results of all analyses suggested that Zn-decorated Mg12O12 nanoclusters are efficient aspirants for the development of high-performance COCl2 sensing materials.

In Silico Designing of Nanoclusters with a Late Transition Metal for NO2 Adsorption: An Efficient Approach toward the Development of NO2 Sensing Materials

Gas sensors are widely used for detection of environmental pollution caused by various environmental factors such as road traffic and combustion of fossil fuels. Nitrogen dioxide (NO2) is one of the leading pollutants of the present age, which causes a number of serious health issues including acute bronchitis, cough, and phlegm, particularly in children. Nowadays, researchers are focused on designing new sensor materials for detection and removal of NO2 from the environment. In this line, we have made an attempt to design NO2 sensing materials by using theoretical techniques. Here, we have reported decoration of Mg12O12 nanoclusters with a late transition metal (Cu) by employing density functional theory at the B3LYP/6-31G(d,p) basis set. The decoration of metal on Mg12O12 gives two geometries (M1 and M2) with adsorption energies of -363.81 and -384.09 kJ/mol, respectively. Adsorption of NO2 on pristine Mg12O12 expressed an adsorption energy value of -62.36 kJ/mol. Adsorption of NO2 on Cu-decorated Mg12O12 nanocages delivered two geometries (N1 and N2) with adsorption energies of -442.56 and -447.64 kJ/mol. Metal-decorated Mg12O12 nanoclusters offer better adsorption of NO2 as compared to pristine Mg12O12 . Adsorption of NO2 on Cu-Mg12O12 nanoclusters also causes narrowing of band gap of magnesium oxide nanoclusters. Large dipole moment, high Q NBO with large electrophilic index in NO2-Cu-Mg12O12 nanoclusters suggested that metal-decorated Mg12O12 nanoclusters are efficient candidates for NO2 adsorption. Different geometric parameters and results of global reactivity descriptors show that NO2-Cu-Mg12O12 nanoclusters are quite stable in nature with least reactivity. Thus, conceptualized systems are potential candidates for applications in NO2 sensing materials.

Structure elucidation and construction of isomerisation pathways in small to moderate-sized (6-27) MgO nanoclusters: an adaptive mutation simulated annealing based analysis with quantum chemical calculations

Determination of global minimum structures and elucidation of reaction paths or minimum energy paths between low-lying minima are of great chemical importance. To that end, we have used our own Adaptive Mutation Simulated Annealing method to determine the global minimum and the minimum energy paths for various isomerisation reactions for small to moderate-sized (MgO)n (n = 6-27) clusters, using the Born-Mayer potential with suitable parameter values. The minimum energy structures obtained by us match well with previously reported data and are used as guess structures for further optimisation at the DFT level (using the B3LYP functional and DGDZVP basis set). Our optimised structures are found to match very well with the further DFT optimised structures, where the comparison is done by determining the root mean square deviation values as well as the radial distribution function profiles. A scheme is proposed to determine the minimum energy paths for isomerisation reactions for some cluster sizes where the transition state/s obtained by us, at very low computational cost, match well with those obtained from further optimisation using DFT calculations. We have shown the efficacy of our method in determining the reaction pathways, even for cases that involve multi-step reactions.

Magnesium oxide clusters as promising candidates for hydrogen storage

A magnesium oxide candidate for hydrogen storage is identified through Born–Oppenheimer molecular dynamics.

Synthesis Target Structures for Alkaline Earth Oxide Clusters

Knowing the possible structures of individual clusters in nanostructured materials is an important first step in their design. With previous structure prediction data for BaO nanoclusters as a basis, data mining techniques were used to investigate candidate structures for magnesium oxide, calcium oxide and strontium oxide clusters. The lowest-energy structures and analysis of some of their structural properties are presented here. Clusters that are predicted to be ideal targets for synthesis, based on being both the only thermally accessible minimum for their size, and a size that is thermally accessible with respect to neighbouring sizes, include global minima for: sizes n = 9 , 15 , 16 , 18 and 24 for (MgO) n ; sizes n = 8 , 9 , 12 , 16 , 18 and 24 for (CaO) n ; the greatest number of sizes of (SrO) n clusters ( n = 8 , 9 , 10 , 12 , 13 , 15 , 16 , 18 and 24); and for (BaO) n sizes of n = 8 , 10 and 16.

On the structure of superbasic (MgO)n sites solvated in a faujasite zeolite

Theory and experiment reveal the structure of magnesium oxide nanoclusters in a superbasic faujasite zeolite.

Electronic and vibrational second hyperpolarizabilities of (MgO)n clusters

In this work, we report results for the static second hyperpolarizability of magnesium oxide clusters including electronic and vibrational contributions. The comparison between second-order Møller-Plesset (MP2) perturbation theory and coupled cluster results to the electronic contribution points out that MP2 is a suitable method to compute this property. When computed at the MP2 level, the electronic contribution per atom converges to approximately 5000 a.u. Vibrational corrections were computed at the MP2 level through the perturbation theoretical method of Bishop and Kirtman. Results obtained showed that the term [α²]^0,0 represents around 20% of the electronic counterpart while the term [μβ]^0,0 is comparable to it. Modes that contribute significantly to [α²]^0,0 are those in which all or part of the bond lengths simultaneously increase and decrease, leading to large polarizability derivatives. In turn, modes that provide relevant contributions to [μβ]^0,0 are those in which oxygen anions move in opposite directions to the magnesium cations yielding large derivatives of the dipole moment and first hyperpolarizability.

Electro- and opto-mutable properties of MgO nanoclusters adsorbed on mono- and double-layer graphene

Inspired by recent experiments, the trapping of molecules in 2D materials has gained increasing attention due to the unique ability of the molecules to modulate the electronic and optical properties of 2D materials, which calls for fundamental understanding and predictive design strategies. Herein, we focus on mono- and double-layer graphene encapsulating various MgO clusters and explore their diverse electronic and optical properties using a number of high-level first-principles calculations. By correlating the stability of adsorption, geometry, charge transfer, band structures, optical absorption spectrum, and the van der Waals pressure, our results decode various synergies in electro- and opto-mutable properties of MgO/graphene systems. We found that 2D-MgO flakes on graphene layers exhibit surface polarization effects - in contrast to their isolated neutral flakes - and show a significant charge transfer from graphene to n-doped flakes, breaking the symmetry of graphene layers. We obtained a van der Waals pressure of ∼0.7 (0.9) GPa on bilayer graphene encapsulating MgO nanoclusters, which matches extremely well with experiment. While there is one quantum emission in the visible light region for a single MgO flake, a wide range of visible light is accessible for MgO on mono- and double-layer graphene. Overall, these findings provide new physical insights and design strategies to modulate 2D materials with several applications in optoelectronics while significantly broadening the spectrum of strategies for fabricating new hybrid 2D heterostructures by encapsulating external molecules.

The impacts of surface polarity on the solubility of nanoparticle

In order to study the dependence of water solubility and hydration behavior of nanoparticles on their surface polarity, we designed polar nanoparticles with varying surface polarity by assigning atomic partial charge to the surface of C60. The water solubility of the nanoparticle is enhanced by several orders of magnitude after the introduction of surface polarity. Nevertheless, when the atomic partial charge grows beyond a certain value (qM), the solubility continuously decreases to the level of nonpolar nanoparticle. It should be noted that such qM is comparable with atomic partial charge of a variety of functional groups. The hydration behaviors of nanoparticles were then studied to investigate the non-monotonic dependence of solubility on the surface polarity. The interaction between the polar nanoparticle and the hydration water is stronger than the nonpolar counterpart, which should facilitate the dissolution of the nanoparticles. On the other hand, the surface polarity also reduces the interaction of hydration water with the other water molecules and enhances the interaction between the nanoparticles which may hinder their dispersion. Besides, the introduction of surface polarity disturbs and even rearranges the hydration structure of nonpolar nanoparticle. Interestingly, the polar nanoparticle with less ordered hydration structure tends to have higher water solubility.

Encasing of Na+ ion in dimer-formed acetic acid clusters

Peaks with anomalous abundance found in the mass spectra are associated with ions with enhanced stability. Among the scientific community focused on mass spectrometry, these peaks are called 'magic peaks' and their stability is often because of suggestive symmetric structures. Here, we report findings on ionised Na-acetic acid clusters [Na(+) -(AcA)n ] produced by Na-doping of (AcA)n and UV laser ionisation. Peaks labelled n = 2, 4, 8 are clearly distinguishable in the mass spectra from their anomalous intensity. Ab initio calculations helped elucidate cluster structures and energetic. A plausible interpretation of the magic peaks is given in terms of (AcA)n formed by dimer aggregation. The encasing of Na(+) by twisted dimers is proposed to be the origin of the enhanced cluster stability. A conceivable dimer-formed tube-like closed structure is found for the Na(+) -(AcA)8 .

Structure prediction of nanoclusters; a direct or a pre-screened search on the DFT energy landscape?

Atomic structure prediction, using KLMC (Lamarckian evolutionary algorithm search), and properties comparison of (KF)_n, (MgO)_n, (ZnO)_n and (CdSe)_n nanoclusters.

Structures and Stabilities of Alkaline Earth Metal Oxide Nanoclusters: A DFT Study

The stability orders of a number of alkaline earth oxide cluster isomers (MO)n, M = Mg, Ca, Sr, Ba and 1≤n≥6 have been determined by means of density functional theory studies using the LDA-PWC functional. Among the candidate structures, the hexagonal-ring-based isomers and the slab shapes are found to display similar stabilities. Stacks of hexagonal (MO)3 rings are found to be the slightly preferred growth strategy among the (MgO)6, isomers. In contrast, the slab structures are slightly preferred for the other alkaline metal oxide (MO)6 clusters. An explanation based on packing and aromaticity arguments has been proposed. This study may have important implications for modeling and understanding the initial growth patterns of small nanostructures of alkaline earth metals.

Density functional study of water-gas shift reaction on M3O(3x)/Cu(111)

Density functional theory (DFT) was employed to study the water dissociation and water-gas shift (WGS) reaction on a series of inverse model catalysts, M(3)O(3x)/Cu(111) (M = Mg, Ti, Zr, Mo, W; x = 1, 2, 3). It has been found that the WGS reaction on Cu can be facilitated by introducing various oxides to lower the barrier of water dissociation. Accordingly, the calculated reaction energy for water dissociation was used as a scaling descriptor to screen the WGS activity of oxide-Cu model catalysts. Our calculations show that the activity towards water dissociation decreases in a sequence: Mg(3)O(3)/Cu(111) > Zr(3)O(6)/Cu(111) > Ti(3)O(6)/Cu(111) > W(3)O(9)/Cu(111), Mo(3)O(9)/Cu(111). It seems that Mg(3)O(3)/Cu(111) is the best WGS catalyst among the systems studied here, being able to dissociate water with no barrier. During the process, both Cu and oxides participate in the reaction directly. The strong M(3)O(3x)-Cu interaction is able to tune the electronic structure of M(3)O(3x) and therefore the activity towards water dissociation. Further studies of the overall WGS reaction on Mg(3)O(3)/Cu(111) show that water dissociation may not be the key step to control the WGS reaction on Mg(3)O(3)/Cu(111) and the removal of H from Mg(3)O(3) can be problematic. The strong interaction between H and O from Mg(3)O(3) blocks the O sites for further water dissociation and therefore the WGS reaction. Our study observes a very different behavior of oxide clusters in such small size from the bigger ones supported on Cu(111) and provides new insight into the rational design of the WGS catalysts.

Structure determination of neutral MgO clusters--hexagonal nanotubes and cages

Structural information for neutral magnesium oxide clusters has been obtained by a comparison of their experimental vibrational spectra with predictions from theory. (MgO)(n) clusters with n = 3-16 have been studied in the gas phase with a tunable IR-UV two-color ionization scheme and size-selective infrared spectra have been measured. These IR spectra are compared to the calculated spectra of the global minimum structures predicted by a hybrid ab initio genetic algorithm. The comparison shows clear evidence that clusters of the composition (MgO)(3k) (k = 1-5) form hexagonal tubes, which confirm previous theoretical predictions. For the intermediate sizes (n≠ 3k) cage-like structures containing hexagonal (MgO)(3) rings are identified. Except for the cubic (MgO)(4) no evidence for bulk like structures is found.

Ablation of Single Crystal MgO by UV Excimer Irradiation

The ablation of single crystal MgO irradiated with 248 nm excimer laser light is studied by means of time resolved spectroscopy and quadrupole mass spectrometry. Luminescence spectra and SEM observations indicate that repeated laser bombardment gradually increases the density of potentially absorbing defects. In polished samples, this progressive growth is preceded by an initial clean-up (reduction) of surface damage. Unlike many wide band gap materials, defect production in MgO by electronic mechanisms is not likely. Chemical etch techniques indicate the presence of high dislocation densities in regions etched by the laser, suggesting that point defect production by dislocation motion is important. The ablation plume is composed of charged particles, including cluster ions, as well as a high density of excited neutrals. The growth of the plume with repeated bombardment correlates with defect formation as indicated by luminescence intensities.

Ultralow-density nanocage-based metal-oxide polymorphs

For two important metal oxides (MO, M=Mg, Zn) we predict, via accurate electronic structure calculations, that new low-density nanoporous crystalline phases may be accessible via the coalescence of nanocluster building blocks. Specifically, we consider the assembly of cagelike (MO)_{12} clusters exhibiting particularly high gas phase stability, leading to new polymorphs with energetic stabilities rivaling (and sometimes higher) than those of known MO polymorphs.

Molecular complexes in close and far away

In this review, gas-phase chemistry of interstellar media and some planetary atmospheres is extended to include molecular complexes. Although the composition, density, and temperature of the environments discussed are very different, molecular complexes have recently been considered as potential contributors to chemistry. The complexes reviewed include strongly bound aggregates of molecules with ions, intermediate-strength hydrogen bonded complexes (primarily hydrates), and weakly bonded van der Waals molecules. In low-density, low-temperature environments characteristic of giant molecular clouds, molecular synthesis, known to involve gas-phase ion-molecule reactions and chemistry at the surface of dust and ice grains is extended here to involve molecular ionic clusters. At the high density and high temperatures found on planetary atmospheres, molecular complexes contribute to both atmospheric chemistry and climate. Using the observational, laboratory, and theoretical database, the role of molecular complexes in close and far away is discussed.