Spectroscopic studies of jet‐cooled AlNi

CrN, CuB, and AuB: A Tale of Two Dissociation Limits

Predissociation thresholds corresponding to dissociation at ground state separated atom limits (SALs) have been recorded in this group for more than 100 d- and f-block metal-containing molecules. The metal atom electronic degeneracies in these molecules generate a dense manifold of electronic states that allow high-lying vibronic levels to couple to pathways leading to dissociation. However, CrN, CuB, and AuB fail to dissociate at their ground SAL. Instead, the molecules remain bound at energies that far surpass their bond dissociation energies (BDEs), and their bonds break only when excited at or above an excited SAL. Sharp predissociation thresholds at excited SALs nevertheless allowed BDEs to be derived: D0(CrN): 3.941(22) eV; D0(CuB): 2.26(15) eV; D0(Au11B): 3.724(3) eV. A previous measurement of D0(AlCr) is re-evaluated as dissociating to a higher energy limit, giving a revised value of D0(AlCr) = 1.32(2) eV. A discussion of this physical behavior is presented.

Chemical Bonding and Electronic Structure of the Early Transition Metal Borides: ScB, TiB, VB, YB, ZrB, NbB, LaB, HfB, TaB, and WB

The predissociation thresholds of the early transition metal boride diatomics (MB, M = Sc, Ti, V, Y, Zr, Nb, La, Hf, Ta, W) have been measured using resonant two-photon ionization (R2PI) spectroscopy, allowing for a precise assignment of the bond dissociation energy (BDE). No previous experimental measurements of the BDE exist in the literature for these species. Owing to the high density of electronic states arising from the ground and low-lying separated atom limits in these open d-subshell species, a congested spectrum of vibronic transitions is observed as the energy of the ground separated atom limit is approached. Nonadiabatic and spin-orbit interactions among these states, however, provide a pathway for rapid predissociation as soon as the ground separated atom limit is reached, leading to a sharp decrease in signal to background levels when this limit is reached. Accordingly, the BDEs of the early transition metal borides have been assigned as D₀(ScB) 1.72(6) eV, D₀(TiB) 1.956(16) eV, D₀(VB) 2.150(16) eV, D₀(YB) 2.057(3) eV, D₀(ZrB) 2.573(5) eV, D₀(NbB) 2.989(12) eV, D₀(LaB) 2.086(18) eV, D₀(HfB) 2.593(3) eV, D₀(TaB) 2.700(3) eV, and D₀(WB) 2.730(4) eV. Additional insight into the chemical bonding and electronic structures of these species has been achieved by quantum chemical calculations.

Bond dissociation energies of diatomic transition metal selenides: ScSe, YSe, RuSe, OsSe, CoSe, RhSe, IrSe, and PtSe

The diatomic transition metal selenides, MSe (M = Sc, Y, Ru, Os, Co, Rh, Ir, and Pt), were studied by resonant two-photon ionization spectroscopy near their respective bond dissociation energies. As these molecules exhibit high densities of vibronic states near their dissociation limits, the spectra typically appear quasicontinuously at these energies. Spin-orbit and nonadiabatic couplings among the multitudes of potential curves allow predissociation to occur on a rapid timescale when the molecule is excited to states lying above the ground separated atom limit. This dissociation process occurs so rapidly that the molecules are dissociated before they can be ionized by the absorption of a second photon. This results in an abrupt drop in the ion signal that is assigned as the 0 K bond dissociation energy for the molecule, giving bond dissociation energies of 4.152(3) eV (ScSe), 4.723(3) eV (YSe), 3.482(3) eV (RuSe), 3.613(3) eV (OsSe), 2.971(6) eV (CoSe), 3.039(9) eV (RhSe), 3.591(3) eV (IrSe), and 3.790(31) eV (PtSe). The enthalpies of formation, Δ_fH_0K° (g), for each diatomic metal selenide were calculated using thermochemical cycles, yielding Δ_fH_0K° (g) values of 210.9(4.5) kJ mol^-1 (ScSe), 203.5(4.5) kJ mol^-1 (YSe), 549.2(4.5) kJ mol^-1 (RuSe), 675.9(6.5) kJ mol^-1 (OsSe), 373.9(2.6) kJ mol^-1 (CoSe), 497.4(2.7) kJ mol^-1 (RhSe), 557.4(6.5) kJ mol^-1 (IrSe), and 433.7(3.6) kJ mol^-1 (PtSe). Utilizing a thermochemical cycle, the ionization energy for ScSe is estimated to be about 7.07 eV. The bonding trends of the transition metal selenides are discussed.

Predissociation Measurements of Bond Dissociation Energies

A fundamental need in chemistry is understanding the chemical bond, for which the most quantitative measure is the bond dissociation energy (BDE). While BDEs of chemical bonds formed from the lighter main group elements are generally well-known and readily calculated by modern computational chemistry, chemical bonds involving the transition metals, lanthanides, and actinides remain computationally extremely challenging. This is due to the simultaneous importance of electron correlation, spin-orbit interaction, and other relativistic effects, coupled with the large numbers of low-lying states that are accessible in systems with open d or f subshells. The development of efficient and accurate computational methods for these species is currently a major focus of the field. An obstacle to this effort has been the scarcity of highly precise benchmarks for the BDEs of M-X bonds. For most of the transition metal, lanthanide, or actinide systems, tabulated BDEs of M-X bonds have been determined by Knudsen effusion mass spectrometric measurements of high-temperature equilibria. The measured ion signals are converted to pressures and activities of the species involved in the equilibrium, and the equilibrium constants are then analyzed using a van't Hoff plot or the third-law method to extract the reaction enthalpy, which is extrapolated to 0 K to obtain the BDE. This procedure introduces errors at every step and ultimately leads to BDEs that are typically uncertain by 2-20 kcal mol^-1 (0.1-1 eV). A second method in common use employs a thermochemical cycle in which the ionization energies of the MX molecule and M atom are combined with the BDE of the M⁺-X bond, obtained via guided ion beam mass spectrometry, to yield the BDE of the neutral, M-X. When accurate values of all three components of the cycle are available, this method yields good results-but only rarely are all three values available. We have recently implemented a new method for the precise measurement of BDEs in molecules with large densities of electronic states that is based on the rapid predissociation of these species as soon as the ground separated atom limit is exceeded. When a sharp predissociation threshold is observed, its value directly provides the BDE of the system. With this method, we are able in favorable cases to determine M-X BDEs to an accuracy of ∼0.1 kcal mol^-1 (0.004 eV). The method is generally applicable to species that have a high density of states at the ground separated atom limit and has been used to measure the BDEs of more than 50 transition metal-main group MX molecules thus far. In addition, a number of metal-metal BDEs have also been measured with this method. There are good prospects for the extension of the method to polyatomic systems and to lanthanide and actinide-containing molecules. These precise BDE measurements provide chemical trends for the BDEs across the transition metal series, as well as crucial benchmarks for the development of efficient and accurate computational methods for the d- and f-block elements.

Bond dissociation energies of FeSi, RuSi, OsSi, CoSi, RhSi, IrSi, NiSi, and PtSi

Resonant two-photon ionization spectroscopy has been used to investigate the spectra of the diatomic late transition metal silicides, MSi, M = Fe, Ru, Os, Co, Rh, Ir, Ni, and Pt, in the vicinity of the bond dissociation energy. In these molecules, the density of vibronic states is so large that the spectra appear quasicontinuous in this energy range. When the excitation energy exceeds the ground separated atom limit, however, a new decay process becomes available-molecular dissociation. This occurs so rapidly that the molecule falls apart before it can absorb another photon and be ionized. The result is a sharp drop to the baseline in the ion signal, which we identify as occurring at the thermochemical 0 K bond dissociation energy, D₀. On this basis, the measured predissociation thresholds provide D₀ = 2.402(3), 4.132(3), 4.516(3), 2.862(3), 4.169(3), 4.952(3), 3.324(3), and 5.325(9) eV for FeSi, RuSi, OsSi, CoSi, RhSi, IrSi, NiSi, and PtSi, respectively. Using thermochemical cycles, the enthalpies of formation of the gaseous MSi molecules are derived as 627(8), 700(10), 799(10), 595(8), 599(8), 636(10), 553(12), and 497(8) kJ/mol for FeSi, RuSi, OsSi, CoSi, RhSi, IrSi, NiSi, and PtSi, respectively. Likewise, combining these results with other data provides the ionization energies of CoSi and NiSi as 7.49(7) and 7.62(7) eV, respectively. Chemical bonding trends among the diatomic transition metal silicides are discussed.

First principle study of AlX (X=3d, 4d, 5d elements and Lu) dimer

The ground state equilibrium bond length, harmonic vibrational frequency, and dissociation energy of AlX (X=3d,4d,5d elements and Lu) dimers are investigated by density functional method B3LYP. The present results are in good agreement with the available experimental and other theoretical values except the dissociation energy of AlCr. The present calculations show that the late transition metal can combine strongly with aluminum compared with the former transition metal. The present calculation also indicates that it is more reasonable to replace La with Lu in the Periodic Table and that the bonding strengths of zinc, cadmium, and mercury with aluminum are very weak.

1 Pi<--X1 Sigma+ band systems of jet-cooled ScCo and YCo

Rotationally resolved resonant two-photon ionization (R2PI) spectra of ScCo and YCo are reported. The measured spectra reveal that these molecules possess ground electronic states of (1)Sigma(+) symmetry, as previously found in the isoelectronic Cr(2) and CrMo molecules. The ground state rotational constants for ScCo and YCo are B(0)(")=0.201 31(22) cm(-1) and B(0) (")=0.120 96(10) cm(-1), corresponding to ground state bond lengths of r(0) (")=1.812 1(10) A and r(0) (")=1.983 0(8) A, respectively. A single electronic band system, assigned as a (1)Pi<--X (1)Sigma(+) transition, has been identified in both molecules. In ScCo, the (1)Pi state is characterized by T(0)=15,428.8, omega(e)(')=246.7, and omega(e)(')x(e)(')=0.73 cm(-1). In YCo, the (1)Pi state has T(0)=13 951.3, omega(e)(')=231.3, and omega(e)(')x(e) (')=2.27 cm(-1). For YCo, hot bands originating from levels up to v(")=3 are observed, allowing the ground state vibrational constants omega(e)(")=369.8, omega(e)(")x(e)(")=1.47, and Delta G(12)(")=365.7 cm(-1) to be deduced. The bond energy of ScCo has been measured as 2.45 eV from the onset of predissociation in a congested vibronic spectrum. A comparison of the chemical bonding in these molecules to related molecules is presented.

Monoligated Monovalent Ni: the 3dNi9 Manifold of States of NiCu and Comparison to the 3d9 States of AlNi, NiH, NiCl, and NiF

A dispersed fluorescence investigation of the low-lying electronic states of NiCu has allowed the observation of four out of the five states that derive from the 3d(Ni)9 3d(Cu)10 sigma2 manifold. Vibrational levels of the ground X2delta(5/2) state corresponding to v = 0-11 are observed and are fit to provide omega(e) = 275.93 +/- 1.06 cm(-1) and omega(e)x(e) = 1.44 +/- 0.11 cm(-1). The v = 0 levels of the higher lying states deriving from the 3d(Ni)9 3d(Cu)10 sigma2 manifold are located at 912, 1466, and 1734 cm(-1), and these states are assigned to omega values of 3/2, 1/2, and 3/2, respectively. The last of these assignments is based on selection rules and is unequivocal; the first two are based on a comparison to ab initio and ligand field calculations and could conceivably be in error. It is also possible that the v = 0 level of the state found at 912 cm(-1) is not observed, so that T0 for the lowest excited state actually lies near 658 cm(-1). These results are modeled using a matrix Hamiltonian based on the existence of a ground manifold of states deriving from the 3d9 configuration on nickel. This matrix Hamiltonian is also applied to the spectroscopically well-known molecules AlNi, NiH, NiCl, and NiF. The term energies of the 2sigma+, 2pi, and 2delta states of these molecules, which all derive from a 3d9 configuration on the nickel atom, display a clear and understandable trend as a function of the electronegativity of the ligands.