Convenient quantification of methanol concentration detection utilizing an integrated microfluidic chip

Development of Electronic Nose for Qualitative and Quantitative Monitoring of Volatile Flammable Liquids

A real-time electric nose (E-nose) with a metal oxide sensor (MOS) array was developed to monitor 5 highly flammable liquids (ethanol, tetrahydrofuran, turpentine, lacquer thinner, and gasoline) in this work. We found that temperature had a significant impact on the test results and temperature control could efficiently improve the performance of our E-nose. The results of our qualitative analysis showed that principal component analysis (PCA) could not efficiently distinguish these samples compared to a back-propagation artificial neural network (BP-ANN) which had a 100% accuracy rate on the test samples. Quantitative analysis was performed by regression analysis and the average errors were 9.1%–18.4%. In addition, through anti-interference training, the E-nose could filter out the potential false alarm caused by mosquito repellent, perfume and hair jelly.

A rapid method to detect and estimate the activity of the enzyme, alcohol oxidase by the use of two chemical complexes - acetylacetone (3,5-diacetyl-1,4-dihydrolutidine) and acetylacetanilide (3,5-di-N-phenylacetyl-1,4-dihydrolutidine)

A rapid and sensitive method has been devised in order to detect and estimate the synthesis of the enzyme alcohol oxidase (AOX) by fungi, by way of the use of two chemical complexes, namely, acetylacetone (3,5-diacetyl-1,4-dihydrolutidine) and acetylacetanilide (3,5-di-N-phenylacetyl-1,4-dihydrolutidine). This method involves the use of the AOX enzyme that could specifically oxidize methanol, giving rise to equimolar equivalents each of formaldehyde (HCHO) and hydrogen peroxide (H₂O₂) as the end products. Further, the formaldehyde, thus produced was allowed to interact with the neutral solutions of acetylacetone and the ammonium salt, gradually developing a yellow color, owing to the synthesis and release of 3,5-diacetyl-1,4-dihydrolutidine (yellow product; λ = 420 nm; λ_ex/em = 390/470 nm) and the product, so generated was quantified spectrophotometrically by measureing its absorbance at 412 nm. In another set up, the amount of formaldehyde produced as a sequel to the oxidation of methanol by the AOX enzyme was determined by allowing it to react with the acetylacetanilide reagent, after which the volume of the fluorescent product - 3,5-di-N-phenylacetyl-1,4-dihydrolutidine (colorless product; λ_ex/em = 390/470 nm) that was generated was estimated by measuring its emission at 460 nm (excitation wavelength at 360 nm) in a spectrophotometer. Of the various substrates tested, a commercial source of the AOX enzyme appreciably oxidizes methanol, thereby generating formaldehyde, and further reacts with acetylacetone, to give rise to a bright yellow complex, displaying a maximum activity of 1402 U/mL. Determination of the AOX activity by the use of acetylacetone and acetylacetanilide could serve as a viable alternative to the conventional alcohol oxidase-peroxidase-2,2'-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid (AOX-POD-ABTS) based method. In view of this, this method appears to be invaluable for application at the various food, pharmaceutical, fuel, biosensor, biorefinery, biopolymer, biomaterial, platform chemical, and biodiesel industries.

A Transdermal Measurement Platform Based on Microfluidics

The Franz diffusion cell is one of the most widely used devices to evaluate transdermal drug delivery. However, this static and nonflowing system has some limitations, such as a relatively large solution volume and skin area and the development of gas bubbles during sampling. To overcome these disadvantages, this study provides a proof of concept for miniaturizing models of transdermal delivery by using a microfluidic chip combined with a diffusion cell. The proposed diffusion microchip system requires only 80 μL of sample solution and provides flow circulation. Two model compounds, Coomassie Brilliant Blue G-250 and potassium ferricyanide, were successfully tested for transdermal delivery experiments. The diffusion rate is high for a high sample concentration or a large membrane pore size. The developed diffusion microchip system, which is feasible, can be applied for transdermal measurement in the future.

Microfluidic rectifier based on poly(dimethylsiloxane) membrane and its application to a micropump

A microfluidic rectifier incorporating an obstructed microchannel and a PDMS membrane is proposed. During forward flow, the membrane deflects in the upward direction; thereby allowing the fluid to pass over the obstacle. Conversely, during reverse flow, the membrane seals against the obstacle, thereby closing the channel and preventing flow. It is shown that the proposed device can operate over a wide pressure range by increasing or decreasing the membrane thickness as required. A microfluidic pump is realized by integrating the rectifier with a simple stepper motor mechanism. The experimental results show that the pump can achieve a vertical left height of more than 2 m. Moreover, it is shown that a maximum flow rate of 6.3 ml/min can be obtained given a membrane thickness of 200 μm and a motor velocity of 80 rpm. In other words, the proposed microfluidic rectifier not only provides an effective means of preventing reverse flow but also permits the realization of a highly efficient microfluidic pump.