First spectroscopic evidence for molecular HCl on a liquid surface with sum frequency generation

Temporal and Chirp Effects of Laser Pulses on the Spectral Lineshape in Sum-Frequency Generation Vibrational Spectroscopy

Assignment and interpretation of the sum-frequency generation vibrational spectra (SFG-VS) depend on the ability to measure and understand the factors affecting the SFG-VS spectral lineshape accurately and reliably. In the past, the formulation of the polarization selection rules for SFG-VS and the development of the sub-wavenumber high-resolution broadband SFG-VS (HR-BB-SFG-VS) have provided solutions for many of these needs. However, despite these advantages, HR-BB-SFG-VS has not been widely adopted. The majority of SFG measurements so far still relies on the picosecond scanning SFG-VS (ps-SFG-VS) or the conventional broadband SFG-VS (BB-SFG-VS) with the spectral resolution around (mostly above) 10 cm-1, which also results in less ideal spectral lineshape in the SFG spectra due to the temporal and chirp effects of the laser pulses used in experiment. In this report, the temporal and the chirp effects of laser pulses with different profiles in the SFG experiment on the measured SFG-VS spectral lineshape are examined through spectral simulation. In addition, the experimental data of a classical model system, i.e., OTS (octadecyltrichlorosilane) monolayer on glass, obtained from the ps-SFG-VS, the BB-SFG-VS, and the HR-BB-SFG-VS measurements, are directly compared and examined. These results show that temporal and chirp effects are often significant in the conventional BB-SFG-VS, resulting lineshape distortions and peak position shifts besides spectral broadening. Such temporal and chirp effects are less significant in the ps scanning SFG-VS. For the HR-BB-SFG-VS, spectral broadening, and temporal and chirp effects are insignificant, making HR-BB-SFG-VS the choice for accurate and reliable measurement and analysis of SFG-VS spectra.

Lyophobicity may not be the main driving force for long chain surfactants from the bulk phase to the interface

According to the Traube rule, a surfactant with a longer alkane chain is more hydrophobic so its tendency to be driven from a polar solvent to a less polar interface is higher. In this work, we revisited this topic by studying the adsorption of quaternary ammonium salts and carboxylic acids with various alkane chain lengths at the hexadecane-water interface. The adsorption free energies of the surfactants at this oil-water interface from the polar (aqueous solution) or nonpolar phase (hexadecane) were estimated from second harmonic generation measurements. The variation of the free energies per methylene group in the bulk phase, at the oil-water interface and at the air-water interface revealed that there are different interactions between the alkane chains of the surfactants in different environments. The chain-chain interaction at the hexadecane-water interface is lower than that at the air-water interface. The driving force for the alkane chains to adsorb at the oil-water interface from the oil phase is close to that from the aqueous phase. This observation reveals that the chain-chain interaction rather than the lyophobicity of the solute with respect to the solvent is the main contributor to the adsorption free energy. This is the first experimental comparison of the free energies of the alkane chains in oil, in water, at the air-water interface and at the oil-water interface. These results provide information for studying the interactions of hydrophobic species in different environments. This work also provides a method for estimating the solvation energy of some head groups in surfactants.

Coexistence of Physisorbed and Solvated HCl at Warm Ice Surfaces

The interfacial ionization of strong acids is an essential factor of multiphase and heterogeneous chemistry in environmental science, cryospheric science, catalysis research and material science. Using near ambient pressure core level X-ray photoelectron spectroscopy, we directly detected a low surface coverage of adsorbed HCl at 253 K in both molecular and dissociated states. Depth profiles derived from XPS data indicate the results as physisorbed molecular HCl at the outermost ice surface and dissociation occurring upon solvation deeper in the interfacial region. Complementary X-ray absorption measurements confirm that the presence of Cl^- ions induces significant changes to the hydrogen bonding network in the interfacial region. This study gives clear evidence for nonuniformity across the air-ice interface and questions the use of acid-base concepts in interfacial processes.

Gas-Microjet Reactive Scattering: Collisions of HCl and DCl with Cool Salty Water

Liquid microjets provide a powerful means to investigate reactions of gases with salty water in vacuum while minimizing gas-vapor collisions. We use this technique to explore the fate of gaseous HCl and DCl molecules impinging on 8 molal LiCl and LiBr solutions at 238 K. The experiments reveal that HCl or DCl evaporate infrequently if they become thermally accommodated at the surface of either solution. In particular, we observe minimal thermal desorption of HCl following HCl collisions and no distinct evidence for rapid, interfacial DCl→HCl exchange following DCl collisions. These results imply that surface thermal motions are not generally strong enough to propel momentarily trapped HCl or DCl back into the gas phase before they ionize and disappear into solution. Instead, only HCl and DCl molecules that scatter directly from the surface escape entry. These recoiling molecules transfer less energy upon collision to LiBr/H2O than to LiCl/H2O, reflecting the heavier mass of Br(-) than of Cl(-) in the interfacial region.

The single-crystal, basal face of ice I(h) investigated with sum frequency generation

Sum frequency generation spectroscopy has been used to investigate the hydrogen-bonded region of single-crystal, hexagonal ice in the temperature range of 113-178 K. The temperature and polarization dependences of the signal are used in conjunction with a recent theoretical model to suggest an interpretation of the bluest and reddest of the hydrogen-bonded peaks. The reddest feature is associated with strong hydrogen bonding; the dynamic polarizability of this feature is primarily parallel to the surface. It is assigned to a cooperative motion among the companion to the free-OH and four-coordinate oscillators hydrogen bonded to dangling lone-pair molecules on the surface. The bluest hydrogen-bonded feature is similarly assigned to a cooperative motion of the OH stretch of dangling lone-pair molecules and of four-coordinate molecules in the lower half bilayer that are hydrogen bonded to free-OH molecules. Reconstruction induced strain is present at as low as 113 K. These results provide a richer picture of the ice surface than has heretofore been possible.

Spectroscopic Studies of Solvated Hydrogen and Hydroxide Ions at Aqueous Surfaces

Measuring the molecular properties of the surface of acidic and basic aqueous solutions is essential to understanding a wide range of important biological, chemical, and environmental processes on our planet. In the present studies, vibrational sum-frequency spectroscopy (VSFS) is employed in combination with isotopic dilution experiments at the vapor/water interface to elucidate the interfacial water structure as the pH is varied with HCl and NaOH. In acidic solutions, solvated proton species are seen throughout the interfacial region, and they alter the hydrogen bonding between water molecules in ways that reflect their depth in the interfacial region. At the higher frequencies of the OH stretch region, there is spectral evidence for solvated proton species residing in the topmost layers of the interfacial region. As reported in previous VSF studies, more strongly bound solvated proton species are observed at lower OH stretching frequencies. The solvated proton species that have stronger hydrogen bonding are similar in structure to those found in bulk acid solutions and likely reside somewhat deeper in the interfacial region. There is also evidence of OH stretching from solvated protons and relatively strong hydrogen bonding in the solvation sphere that is similar to other solvated ions. In contrast, water molecules solvating OH(-) ions show relatively weak hydrogen bonding and significantly less interfacial order. VSF spectra are acquired under multiple polarizations to provide crucial information for the interpretation of the spectra and for the determination of interfacial structure.

Theoretical Studies of Solute Vibrational Energy Relaxation at Liquid Interfaces

Recent advances in the theoretical understanding of solute vibrational energy relaxation at liquid interfaces and surfaces are described. Non-equilibrium molecular dynamics simulations of the relaxation of an initially excited solute molecule are combined with equilibrium force autocorrelation calculations to gain insight into the factors that influence the vibrational relaxation rate. Diatomic and triatomic nonpolar, polar, and ionic solute molecules adsorbed at the liquid/vapor interface of several liquids as well as at the water/CCl(4) liquid/liquid interface are considered. In general, the vibrational relaxation rate is significantly slower (a factor of 3 to 4) at the liquid/vapor and liquid/liquid interface than in the bulk due to the reduced density, which gives rise to a reduced contribution of the repulsive solvent-solute forces on the vibrational mode. The surface effects on the ionic solutes are much smaller (50% or less slower relaxation relative to the bulk). This is due to the fact that ionic solutes at the interface are able to keep part of their solvation shell to a degree that depends on their size. Thus, a significant portion of the repulsive forces is maintained. A high degree of correlation is found between the peak height of the solvent-solute radial distribution function and the vibrational relaxation rate. The relaxation rate at the liquid/liquid interface strongly depends on the location of the solute across the interface and correlates with the change in the density and polarity profile of the interface.

Angle resolved ion scattering spectroscopy reveals the local topography around atoms in a liquid surface

Neutral impact collision ion scattering spectroscopy under normal incidence is known to yield the concentration depth profiles of all elements except hydrogen at the surface of liquids and other amorphous material. In the evaluation of the data one tactically has to assume that the top surface layer and the adjacent layers are laterally homogeneous. In the present paper we establish that the angular resolved mode of this spectroscopy is able to test with high accuracy whether the lateral homogeneity is valid and-if this is not the case-in which way the top layer is structured. In particular, it is possible to map out the local environment of selected atoms. We expect that this so far inaccessible information on the local topography at liquid surfaces will have an impact on the understanding of reactions at the gas/liquid interface.

Surface properties of aqueous amino acid solutions

The surface tensions of aqueous solutions of four mixtures (hydrochloric acid-glycine hydrochloride, glycine hydrochloride-glycine, glycine-sodium glycinate, and sodium glycinate-sodium hydroxide) were measured as a function of total molality and mole fraction. The measurements correspond to the change in surface tension with variation of pH. The contribution of glycine hydrochloride to the increments in surface tension is equivalent to that observed for the aqueous solution of glycine, while the contribution of sodium glycinate is much larger than that of glycine. The variations in surface tension on mixing in the surface region are discussed using comparisons with mixtures of simple salts.