Biomass pyrolysis: Thermal decomposition mechanisms of furfural and benzaldehyde

Cyclopentene and cyclopentadiene formation in isoprene pyrolysis

Photoion mass-selected threshold photoelectron spectroscopy (ms-TPES) was used to identify the isoprene pyrolysis products in a SiC microreactor at 1400 °C with the help of literature and Franck-Condon simulated reference spectra for molecular species at the detected m/z ratios. The key observation is the presence of equimolar amounts of isoprene and cyclopentene at the pyrolysis temperature based on the m/z 68 ms-TPES, indicating kinetically allowed isoprene isomerization concurrently with fragmentation reactions. This isomerization was computationally explored and was found to take place via a short-lived vinylcyclopropane intermediate, which was previously proposed to isomerize into isoprene and cyclopentene, with the latter product being dominant. Cyclopentene then decomposes by loss of H2 to form m/z 66, cyclopentadiene (also observed). Previously postulated products of dimethylallene, methylallene, and allene were not observed. Of the possible C2-C4-products, the extracted ms-TPES confirmed only 1,3-butadiene and 2-butyne (m/z 54), 1-buten-3-yne (m/z 52), propene (m/z 42), propyne (m/z 40), propargyl radical (m/z 39), as well as C2H4, C2H2, CH4, and CH3. A trace amount of benzene was also observed at m/z 78, indicative of bimolecular chemistry. The results draw into question a number of the suggested unimolecular reaction products in the recent literature and thus the kinetic models for isoprene pyrolysis.

Catalytic pyrolysis mechanism of lignin moieties driven by aldehyde, hydroxyl, methoxy, and allyl functionalization: the role of reactive quinone methide and ketene intermediates

The catalytic pyrolysis of guaiacol-based lignin monomers, vanillin, syringol, and eugenol over commercial HZSM-5 has been investigated using operando Photoelectron Photoion Coincidence (PEPICO) spectroscopy to unveil the reaction mechanism by detecting reactive intermediates, such as quinone methides and ketenes, and products. Vanillin shares the decomposition mechanism with guaiacol due to prompt and efficient decarbonylation, which allows us to control this reaction leading to a phenol selectivity increase by switching to a faujasite catalyst and decreasing the Si/Al ratio. Syringol first demethylates to 3-methoxycatechol, which mainly dehydroxylates to o- and m-guaiacol. Ketene formation channels over HZSM-5 are less important here than for guaiacol or vanillin, but product distribution remains similar. C3 addition to guaiacol yields eugenol, which shows a more complex product distribution upon catalytic pyrolysis. By analogies to monomers with simplified functionalization, namely allylbenzene, 4-allylcatechol, and 4-methylcatechol, the eugenol chemistry could be fully resolved. Previously postulated reactive semi-quinone intermediates are detected spectroscopically, and their involvement opens alternative pathways to condensation and phenol formation. Allyl groups, produced by dehydroxylation of the β-O-4 bond, may not only decompose via C1/C2/C3 loss, but also cyclize to indene and its derivatives over HZSM-5. This comparably high reactivity leads to an unselective branching of the chemistry and to a complex product distribution, which is difficult to control. Indenes and naphthalenes are also prototypical coke precursors efficiently deactivating the catalyst. We rely on these mechanistic insights to discuss strategies to fine-tune process conditions to increase the selectivities of desired products by enhancing either vanillin and guaiacol or supressing eugenol yields from native lignin.

Porous N-Doped Carbon-encapsulated Iron as Novel Catalyst Architecture for the Electrocatalytic Hydrogenation of Benzaldehyde

Carbon porous materials containing nitrogen functionalities and encapsulated iron-based active sites have been suggested as electrocatalysts for energy conversion, however their applications to the hydrogenation of organic substrates via electrocatalytic hydrogenation (ECH) remain unexplored. Herein, we report on a Fe@C:N material synthesized with an adapted annealing procedure and tested as electrocatalyst for the hydrogenation of benzaldehyde. Using different concentrations of the organic, and electrolysis coupled to gas chromatography experiments, we demonstrate that it is possible to use such architectures for the ECH of unsaturated organics. Potential control experiments show that ECH faradaic efficiencies >70 % are possible in acid electrolytes, while maintaining selectivity for the alcohol over the pinacol dimerization product. Estimates of product formation rates and turnover frequency (TOF) values suggest that these carbon-encapsulated architectures can achieve competitive performance in acid electrolytes relative to both base and precious metal electrodes.

Enhanced Electrochemical Hydrogenation of Benzaldehyde to Benzyl Alcohol on Pd@Ni-MOF by Modifying the Adsorption Configuration

Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.2) aqueous electrolyte is explored. An outstanding ECH rate up to 283 μmol cm-2 h-1 with a Faradaic efficiency (FE) of 76% is reached. Besides, higher FEs of up to 96% are achieved using a step-function voltage. Materials Studio and density functional theory calculations show these outstanding performances to be associated with the Ni-MOF support that promotes H-bond formation, facilitates water desorption, and induces favorable tilted BZH adsorption on the surface of the Pd nanoparticles. In this configuration, BZH is bonded to the Pd surface by the carbonyl group rather than through the aromatic ring, thus reducing the energy barriers of the elemental reaction steps and increasing the overall reaction efficiency.

The Unimolecular Chemistry of Methyl Chloroformate Ions and Neutrals: A Story of Near-Threshold Decomposition

The near-threshold dissociation of ionized and neutral methyl chloroformate (CH3COOCl, MCF) was explored with imaging photoelectron photoion coincidence spectroscopy. The threshold photoelectron spectrum (TPES) for MCF was acquired for the first time; the large geometry changes upon ionization of MCF result in a broad, poorly defined TPES. Franck-Condon simulations are consistent with an adiabatic ionization energy (IE) of 10.90 ± 0.05 eV. Ionized MCF dissociates by chlorine atom loss at a measured 0 K appearance energy (AE) of 11.30 ± 0.01 eV. Together with the above IE, this AE suggests a reaction barrier of 0.40 ± 0.05 eV, consistent with the SVECV-f12 computational result of 0.41 eV. At higher internal energies, the loss of CH3O• becomes competitive due to its lower entropy of activation. Pyrolysis of neutral MCF formed the anticipated major products CH3Cl + CO2 (R1) and the minor products HCl + CO + CH2O (R2). The thermal decomposition products were identified by their photoion mass-selected threshold photoelectron spectrum (ms-TPES). Possible reaction pathways were explored computationally to confirm the dominant ones: R1 proceeds by a concerted Cl atom migration via a four-membered transition state in agreement with the mechanism proposed in the literature. R2 is a two-step reaction first yielding 2-oxiranone by HCl loss, which then decomposes to CH2O and CO. Kinetic modeling of the neutral decomposition could simulate the observed reactions only if the vibrational temperature of the MCF was assumed not to cool in the expansion.

Particulate organic emissions from incense-burning smoke: Chemical compositions and emission characteristics

Incense burning is a common practice in Asian cultures, releasing hazardous particulate organics. Inhaling incense smoke can result in adverse health effects, yet the molecular compositions of incense-burning organics have not been well investigated due to the lack of measurement of intermediate-volatility and semi-volatile organic compounds (I/SVOCs). To elucidate the detailed emission profile of incense-burning particles, we conducted a non-target measurement of organics emitted from incense combustion. Quartz filters were utilized to trap particles, and organics were analyzed by a comprehensive two-dimensional gas chromatography-mass spectrometer (GC × GC-MS) coupled with a thermal desorption system (TDS). To deal with the complex data obtained by GC × GC-MS, homologs are identified mainly by the combination of selected ion chromatograms (SICs) and retention indexes. SICs of 58, 60, 74, 91, and 97 were utilized to identify 2-ketones, acids, fatty acid methyl esters, fatty acid phenylmethyl esters, and alcohols, respectively. Phenolic compounds contribute the most to emission factors (EFs) among all chemical classes, taking up 24.5 % ± 6.5 % of the total EF (96.1 ± 43.1 μg g-1). These compounds are largely derived from the thermal degradation of lignin. Biomarkers like sugars (mainly levoglucosan), hopanes, and sterols are extensively detected in incense combustion fumes. Incense materials play a more important role in shaping emission profiles than incense forms. Our study provides a detailed emission profile of particulate organics emitted from incense burning across the full-volatility range, which can be used in the health risk assessments. The data processing procedure in this work could also benefit those with less experience in non-target analysis, especially GC × GC-MS data processing.

Probing the pyrolysis of ethyl formate in the dilute gas phase by synchrotron radiation and theory

The thermal decomposition of the atmospheric constituent ethyl formate was studied by coupling flash pyrolysis with imaging photoelectron photoion coincidence (iPEPICO) spectroscopy using synchrotron vacuum ultraviolet (VUV) radiation at the Swiss Light Source (SLS). iPEPICO allows photoion mass-selected threshold photoelectron spectra (ms-TPES) to be obtained for pyrolysis products. By threshold photoionization and ion imaging, parent ions of neutral pyrolysis products and dissociative photoionization products could be distinguished, and multiple spectral carriers could be identified in several ms-TPES. The TPES and mass-selected TPES for ethyl formate are reported for the first time and appear to correspond to ionization of the lowest energy conformer having a cis (eclipsed) configuration of the O=C(H)-O-C(H₂ )-CH₃ and trans (staggered) configuration of the O=C(H)-O-C(H₂ )-CH₃ dihedral angles. We observed the following ethyl formate pyrolysis products: CH₃ CH₂ OH, CH₃ CHO, C₂ H₆ , C₂ H₄ , HC(O)OH, CH₂ O, CO₂ , and CO, with HC(O)OH and C₂ H₄ pyrolyzing further, forming CO + H₂ O and C₂ H₂  + H₂ . The reaction paths and energetics leading to these products, together with the products of two homolytic bond cleavage reactions, CH₃ CH₂ O + CHO and CH₃ CH₂  + HC(O)O, were studied computationally at the M06-2X-GD3/aug-cc-pVTZ and SVECV-f12 levels of theory, complemented by further theoretical methods for comparison. The calculated reaction pathways were used to derive Arrhenius parameters for each reaction. The reaction rate constants and branching ratios are discussed in terms of the residence time and newly suggest carbon monoxide as a competitive primary fragmentation product at high temperatures.

A Theoretical Study of H-Abstractions of Benzaldehyde by H, O3(P), 3O2, OH, HO2, and CH3 Radicals: Ab Initio Rate Coefficients and Their Uncertainty Quantification

Benzaldehyde is a vital intermediate during the oxidation of toluene and oxygenated aromatics, but benzaldehyde's combustion chemistry currently gains little attention. The H-atom abstraction of benzaldehyde is one critical reaction class, yet its rate coefficients rely on the analogy of molecular similarity. For this reason, we have employed the ab initio calculations at the CCSD(T)/cc-pVTZ//M06-2X/6-311+g(d,p) level of theory, along with the RRKM master equation to predict the rate coefficients of H-abstraction reactions of benzaldehyde by H, O³(P), ³O₂, OH, HO₂, and CH₃ radicals. The calculated rate coefficients of benzaldehyde + OH generally agree with literature measurements. From the branching ratio analysis, all the H-abstractions from ring sites can be neglected in kinetic model construction except by OH radical at temperature above 1700 K, where the ring sites contribute a relatively large branching ratio to consume benzaldehyde. A random sampling method has been used to estimate the global uncertainty in the calculated rate coefficients. The logarithm of uncertainty is proportional to the reciprocal temperature, and the global uncertainty is primarily derived from the energy errors and is almost independent of the attacking species. Comparison between benzaldehyde and acetaldehyde reveals that their rate coefficients are consistent only in H-abstractions by H and HO₂ but are conflictive in other reactions, especially in the case of OH. By incorporating the new calculations, existing models show a faster prediction in autoignition delay times of benzaldehyde. This study reports the first high-level ab initio calculations for the H-atom abstraction reaction class of benzaldehyde. It is necessary for the future comprehensive kinetic modeling of aromatic aldehyde.

Continuous Pyrolysis Microreactors: Hot Sources with Little Cooling? New Insights Utilizing Cation Velocity Map Imaging and Threshold Photoelectron Spectroscopy

Resistively heated silicon carbide microreactors are widely applied as continuous sources to selectively prepare elusive and reactive intermediates with astrochemical, catalytic, or combustion relevance to measure their photoelectron spectrum. These reactors also provide deep mechanistic insights into uni- and bimolecular chemistry. However, the sampling conditions and effects have not been fully characterized. We use cation velocity map imaging to measure the velocity distribution of the molecular beam signal and to quantify the scattered, rethermalized background sample. Although translational cooling is efficient in the adiabatic expansion from the reactor, the breakdown diagrams of methane and chlorobenzene confirm that the molecular beam component exhibits a rovibrational temperature comparable with that of the reactor. Thus, rovibrational cooling is practically absent in the expansion from the microreactor. The high rovibrational temperature also affects the threshold photoelectron spectrum of both benzene and the allyl radical in the molecular beam, but to different degrees. While the extreme broadening of the benzene TPES suggests a complex ionization mechanism, the allyl TPES is in fact consistent with an internal temperature close to that of the reactor. The background, room-temperature spectra of both are superbly reproduced by Franck-Condon simulations at 300 K. On the one hand, this leads us to suggest that room-temperature reference spectra should be used in species identification. On the other hand, analysis of the allyl iodide pyrolysis data shows that iodine atoms often recombine to form molecular iodine on the chamber surfaces. Such sampling effects may distort the chemical composition of the scattered background with respect to the molecular beam signal emanating directly from the reactor. This must be considered in quantitative analyses and kinetic modeling.

Isomer-dependent catalytic pyrolysis mechanism of the lignin model compounds catechol, resorcinol and hydroquinone

The catalytic pyrolysis mechanism of the initial lignin depolymerization products will help us develop biomass valorization strategies. How does isomerism influence reactivity, product formation, selectivities, and side reactions? By using imaging photoelectron photoion coincidence (iPEPICO) spectroscopy with synchrotron radiation, we reveal initial, short-lived reactive intermediates driving benzenediol catalytic pyrolysis over H-ZSM-5 catalyst. The detailed reaction mechanism unveils new pathways leading to the most important products and intermediates. Thanks to the two vicinal hydroxyl groups, catechol (o-benzenediol) is readily dehydrated to form fulvenone, a reactive ketene intermediate, and exhibits the highest reactivity. Fulvenone is hydrogenated on the catalyst surface to phenol or is decarbonylated to produce cyclopentadiene. Hydroquinone (p-benzenediol) mostly dehydrogenates to produce p-benzoquinone. Resorcinol, m-benzenediol, is the most stable isomer, because dehydration and dehydrogenation both involve biradicals owing to the meta position of the hydroxyl groups and are unfavorable. The three isomers may also interconvert in a minor reaction channel, which yields small amounts of cyclopentadiene and phenol via dehydroxylation and decarbonylation. We propose a generalized reaction mechanism for benzenediols in lignin catalytic pyrolysis and provide detailed mechanistic insights on how isomerism influences conversion and product formation. The mechanism accounts for processes ranging from decomposition reactions to molecular growth by initial polycyclic aromatic hydrocarbon (PAH) formation steps to yield, e.g., naphthalene. The latter involves a Diels-Alder dimerization of cyclopentadiene, isomerization, and dehydrogenation.

Versatile Coordination Polymer Catalyst for Acid Reactions Involving Biobased Heterocyclic Chemicals

The chemical valorization/repurposing of biomass-derived chemicals contributes to a biobased economy. Furfural (Fur) is a recognized platform chemical produced from renewable lignocellulosic biomass, and furfuryl alcohol (FA) is its most important application. The aromatic aldehydes Fur and benzaldehyde (Bza) are commonly found in the slate of compounds produced via biomass pyrolysis. On the other hand, glycerol (Gly) is a by-product of the industrial production of biodiesel, derived from fatty acid components of biomass. This work focuses on acid catalyzed routes of Fur, Bza, Gly and FA, using a versatile crystalline lamellar coordination polymer catalyst, namely [Gd(H4nmp)(H2O)2]Cl·2H2O (1) [H6nmp=nitrilotris(methylenephosphonic acid)] synthesized via an ecofriendly, relatively fast, mild microwave-assisted approach (in water, 70 °C/40 min). This is the first among crystalline coordination polymers or metal-organic framework type materials studied for the Fur/Gly and Bza/Gly reactions, giving heterobicyclic products of the type dioxolane and dioxane, and was also effective for the FA/ethanol reaction. 1 was stable and promoted the target catalytic reactions, selectively leading to heterobicyclic dioxane and dioxolane type products in the Fur/Gly and Bza/Gly reactions (up to 91% and 95% total yields respectively, at 90 °C/4 h), and, on the other hand, 2-(ethoxymethyl)furan and ethyl levulinate from heterocyclic FA.

Thermal decomposition and isomerization of furfural and 2-pyrone: a theoretical kinetic study

We have studied the decomposition and isomerization of furfural in the gas phase using quantum chemical and statistical reaction rate theory techniques. This work uncovers a variety of new reaction channels in furfural pyrolysis that lead to formation of the experimentally observed products, including CO2, which was previously unexplained. In addition to the known mechanism for furan + CO production, furfural is shown to isomerize directly to 2-pyrone, with a barrier height of 69 kcal mol-1, from where it can decompose to vinylketene + CO (highest barrier of 65 kcal mol-1) or to CO2 + 1,3-cyclobutadiene (highest barrier of 66 kcal mol-1). Alternative pathways to vinylketene + CO and 4-pyrone are also described. An RRKM theory/master equation model is developed to describe reactions on the C5O2H4 surface and used to simulate the decomposition kinetics of furfural and 2-pyrone. For both molecules, decomposition at 1400-2100 K is dominated by the formation of furan + CO, which represents around 75% of the total products, compared to around 19% and 6% for vinylketene + CO and total CO2, respectively. The model also predicts significant formation of stabilized 2-pyrone under these conditions. Rate coefficient expressions are reported as a function of both temperature and pressure for the main decomposition and isomerization channels identified in the pyrolysis of furfural and 2-pyrone, to facilitate detailed chemical kinetic modelling of these important oxygenated hydrocarbons.

New analytical tools for advanced mechanistic studies in catalysis: photoionization and photoelectron photoion coincidence spectroscopy

How can we detect reactive and elusive intermediates in catalysis to unveil reaction mechanisms? In this mini review, we discuss novel photoionization tools to support this quest.

Metamorphic meta isomer: carbon dioxide and ketenes are formed via retro-Diels–Alder reactions in the decomposition of meta-benzenediol

Deoxygenation of the lignin model compound resorcinol was investigated using VUV synchrotron radiation: Formation of two reactive ketenes and decarboxylation are the dominating pathways, much different from the other two benzenediol isomers.

Thermal Decomposition Mechanism for Ethanethiol

The thermal decomposition of ethanethiol was studied using a 1 mm × 2 cm pulsed silicon carbide microtubular reactor, CH₃CH₂SH + Δ → Products. Unlike previous studies these experiments were able to identify the initial ethanethiol decomposition products. Ethanethiol was entrained in either an Ar or a He carrier gas, passed through a heated (300-1700 K) SiC microtubular reactor (roughly ≤100 μs residence time) and exited into a vacuum chamber. Within one reactor diameter the gas cools to less than 50 K rotationally, and all reactions cease. The resultant molecular beam was probed by photoionization mass spectroscopy and IR spectroscopy. Ethanethiol was found to undergo unimolecular decomposition by three pathways: CH₃CH₂SH → (1) CH₃CH₂ + SH, (2) CH₃ + H₂C═S, and (3) H₂C═CH₂ + H₂S. The experimental findings are in good agreement with electronic structure calculations.

Understanding the mechanism of catalytic fast pyrolysis by unveiling reactive intermediates in heterogeneous catalysis

Catalytic fast pyrolysis is a promising way to convert lignin into fine chemicals and fuels, but current approaches lack selectivity and yield unsatisfactory conversion. Understanding the pyrolysis reaction mechanism at the molecular level may help to make this sustainable process more economic. Reactive intermediates are responsible for product branching and hold the key to unveiling these mechanisms, but are notoriously difficult to detect isomer-selectively. Here, we investigate the catalytic pyrolysis of guaiacol, a lignin model compound, using photoelectron photoion coincidence spectroscopy with synchrotron radiation, which allows for isomer-selective detection of reactive intermediates. In combination with ambient pressure pyrolysis, we identify fulvenone as the central reactive intermediate, generated by catalytic demethylation to catechol and subsequent dehydration. The fulvenone ketene is responsible for the phenol formation. This technique may open unique opportunities for isomer-resolved probing in catalysis, and holds the potential for achieving a mechanistic understanding of complex, real-life catalytic processes.

The conversion of lignin by catalytic fast pyrolysis into useful fine chemicals is a promising route to fuel production, however selectivity and conversion are still not optimal. Here, the authors investigate the reaction mechanism by detection of reactive intermediates responsible for the formation of key products.

Thermal Decomposition of Potential Ester Biofuels. Part I: Methyl Acetate and Methyl Butanoate

Two methyl esters were examined as models for the pyrolysis of biofuels. Dilute samples (0.06-0.13%) of methyl acetate (CH₃COOCH₃) and methyl butanoate (CH₃CH₂CH₂COOCH₃) were entrained in (He, Ar) carrier gas and decomposed in a set of flash-pyrolysis microreactors. The pyrolysis products resulting from the methyl esters were detected and identified by vacuum ultraviolet photoionization mass spectrometry. Complementary product identification was provided by matrix infrared absorption spectroscopy. Pyrolysis pressures in the pulsed microreactor were about 20 Torr and residence times through the reactors were roughly 25-150 μs. Reactor temperatures of 300-1600 K were explored. Decomposition of CH₃COOCH₃ commences at 1000 K, and the initial products are (CH₂═C═O and CH₃OH). As the microreactor is heated to 1300 K, a mixture of CH₂═C═O and CH₃OH, CH₃, CH₂═O, H, CO, and CO₂ appears. The thermal cracking of CH₃CH₂CH₂COOCH₃ begins at 800 K with the formation of CH₃CH₂CH═C═O and CH₃OH. By 1300 K, the pyrolysis of methyl butanoate yields a complex mixture of CH₃CH₂CH═C═O, CH₃OH, CH₃, CH₂═O, CO, CO₂, CH₃CH═CH₂, CH₂CHCH₂, CH₂═C═CH₂, HCCCH₂, CH₂═C═C═O, CH₂═CH₂, HC≡CH, and CH₂═C═O. On the basis of the results from the thermal cracking of methyl acetate and methyl butanoate, we predict several important decomposition channels for the pyrolysis of fatty acid methyl esters, R-CH₂-COOCH₃. The lowest-energy fragmentation will be a 4-center elimination of methanol to form the ketene RCH═C═O. At higher temperatures, concerted fragmentation to radicals will ensue to produce a mixture of species: (RCH₂ + CO₂ + CH₃) and (RCH₂ + CO + CH₂═O + H). Thermal cracking of the β C-C bond of the methyl ester will generate the radicals (R and H) as well as CH₂═C═O + CH₂═O. The thermochemistry of methyl acetate and its fragmentation products were obtained via the Active Thermochemical Tables (ATcT) approach, resulting in Δ_fH₂₉₈(CH₃COOCH₃) = -98.7 ± 0.2 kcal mol^-1, Δ_fH₂₉₈(CH₃CO₂) = -45.7 ± 0.3 kcal mol^-1, and Δ_fH₂₉₈(COOCH₃) = -38.3 ± 0.4 kcal mol^-1.

An optically accessible pyrolysis microreactor

We report an optically accessible pyrolysis micro-reactor suitable for in situ laser spectroscopic measurements. A radiative heating design allows for completely unobstructed views of the micro-reactor along two axes. The maximum temperature demonstrated here is only 1300 K (as opposed to 1700 K for the usual SiC micro-reactor) because of the melting point of fused silica, but alternative transparent materials will allow for higher temperatures. Laser induced fluorescence measurements on nitric oxide are presented as a proof of principle for spectroscopic characterization of pyrolysis conditions.

Chirped-Pulse millimeter-Wave spectroscopy for dynamics and kinetics studies of pyrolysis reactions

A Chirped-Pulse millimeter-Wave (CPmmW) spectrometer is applied to the study of chemical reaction products that result from pyrolysis in a Chen nozzle heated to 1000-1800 K. Millimeter-wave rotational spectroscopy unambiguously determines, for each polar reaction product, the species, the conformers, relative concentrations, conversion percentage from precursor to each product, and, in some cases, vibrational state population distributions. A chirped-pulse spectrometer can, within the frequency range of a single chirp, sample spectral regions of up to ∼10 GHz and simultaneously detect many reaction products. Here we introduce a modification to the CPmmW technique in which multiple chirps of different spectral content are applied to a molecular beam pulse that contains the pyrolysis reaction products. This technique allows for controlled allocation of its sensitivity to specific molecular transitions and effectively doubles the bandwidth of the spectrometer. As an example, the pyrolysis reaction of ethyl nitrite, CH3CH2ONO, is studied, and CH3CHO, H2CO, and HNO products are simultaneously observed and quantified, exploiting the multi-chirp CPmmW technique. Rotational and vibrational temperatures of some product molecules are determined. Subsequent to supersonic expansion from the heated nozzle, acetaldehyde molecules display a rotational temperature of 4 ± 1 K. Vibrational temperatures are found to be controlled by the collisional cooling in the expansion, and to be both species- and vibrational mode-dependent. Rotational transitions of vibrationally excited formaldehyde in levels ν4, 2ν4, 3ν4, ν2, ν3, and ν6 are observed and effective vibrational temperatures for modes 2, 3, 4, and 6 are determined and discussed.

Chirped-Pulse Fourier Transform Microwave Spectroscopy Coupled with a Flash Pyrolysis Microreactor: Structural Determination of the Reactive Intermediate Cyclopentadienone

Chirped-pulse Fourier transform microwave spectroscopy (CP-FTMW) is combined with a flash pyrolysis (hyperthermal) microreactor as a novel method to investigate the molecular structure of cyclopentadienone (C5H4═O), a key reactive intermediate in biomass decomposition and aromatic oxidation. Samples of C5H4═O were generated cleanly from the pyrolysis of o-phenylene sulfite and cooled in a supersonic expansion. The (13)C isotopic species were observed in natural abundance in both C5H4═O and in C5D4═O samples, allowing precise measurement of the heavy atom positions in C5H4═O. The eight isotopomers include: C5H4═O, C5D4═O, and the singly (13)C isotopomers with (13)C substitution at the C1, C2, and C3 positions. Microwave spectra were interpreted by CCSD(T) ab initio electronic structure calculations and an re molecular structure for C5H4═O was found. Comparisons of the structure of this "anti-aromatic" molecule are made with those of comparable organic molecules, and it is concluded that the disfavoring of the "anti-aromatic" zwitterionic resonance structure is consistent with a more pronounced C═C/C-C bond alternation.