Organization of polymer chains onto long, single-wall carbon nano-tubes: Effect of tube diameter and cooling method

Two-component polymer sorting to obtain high-purity s-SWCNTs for all-carbon photodetectors

The advancement of carbon-based electronics is reliant on the development of semiconducting carbon nanotubes with high purity and yield. We developed a new extraction strategy to efficiently sort SWCNTs with superior yields and purity. The approach uses two polymers, poly[N-(1-octylnonyl)-9H-carbazol-2,7-diyl](PCz) and poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole)(PDFP), and two sonication processes to eliminate surface polymer contamination. PCz selectively wraps large-diameter s-SWCNTs, with PDFP added as an enhancing molecule to increase sorting efficiency at 4-fold compared to the efficiency of only PCz alone sorting. The purity of the sorted s-SWCNTs was confirmed to be above 99 % using absorption and Raman spectra. Field-effect transistors and photodetectors made from the sorted s-SWCNTs exhibited excellent semiconductor properties and broad-spectrum detection, with good long-term stability. Furthermore, a photodetector using large-tube diameter s-SWCNTs achieved broad-spectrum detection, which the photoresponsivity is 0.35 mA/W and the detectivity is 4.7×106 Jones. The s-SWCNTs/graphene heterojunction photodetector achieved a photoresponsivity of 3 mA/W and a detectivity of 6.3×106 Jones. This new strategy provides a promising approach to obtain high-purity and high-yield s-SWCNTs for carbon-based photodetectors.

Structure and dynamics of an active polymer adsorbed on the surface of a cylinder

The structure and dynamics of an active polymer on a smooth cylindrical surface are studied by Brownian dynamics simulations. The effect of an active force on the polymer adsorption behavior and the combined effect of chain mobility, length N, rigidity κ, and cylinder radius, R, on the phase diagrams are systemically investigated. We find that complete adsorption is replaced by the irregular alternative adsorption/desorption process at a large driving force. Three typical (spiral, helix-like, and rod-like) conformations of the active polymer are observed, dependent on N, κ, and R. Dynamically, the polymer shows rotational motion in the spiral state, snake-like motion in the intermediate state, and straight translational motion without turning back in the rod-like state. In the spiral state, we find that the rotation velocity ω and the chain length follow a power-law relation ω ∼ N^-0.42, consistent with the torque-balance theory of general Archimedean spirals. And the polymer shows super-diffusive behavior along the cylinder for a long time in the helix-like and rod-like states. Our results highlight that the mobility, rigidity, and curvature of surface can be used to regulate the polymer behavior.

Enrichment of large-diameter semiconducting single-walled carbon nanotubes by a mixed-extractor strategy

In this work, we report a new mixed-extractor strategy to improve the sorting yield of large-diameter semiconducting single-walled carbon nanotubes (s-SWCNTs) with high purity. In the new mixed-extractor strategy, two kinds of conjugated polymers with different rigidity, poly(9,9-n-dihexyl-2,7-fluorene-alt-9-phenyl-3,6-carbazole) (PDFP) and poly(9,9-dioctylfluorene-alt-benzothiadiazole) (P8BT), are used to sort large-diameter s-SWCNTs through two simple sonication processes. To our surprise, although PDFP itself shows no selectivity toward s-SWCNTs, it can greatly enhance the sorting yield of P8BT. Using the PDFP/P8BT mixed-extractor method, the yield of sorted s-SWCNTs has been enhanced by 5 times with a purity above 99 % in comparison to that using P8BT single-extractor method. In addition, the photoluminescence (PL) excitation maps shows that the PDFP/P8BT mixed-extractor system not only enhances the sorting yield substantially, but also tends to be enrichment of (15,4) SWCNTs with the diameter of 1.36 nm.

Effect of Uniformly Applied Force and Molecular Characteristics of a Polymer Chain on Its Adhesion to Graphene Substrates

The force-induced desorption of a polymer chain from a graphene substrate is studied with molecular dynamics (MD). A critical force needs to be exceeded before detachment of the polymer from the substrate. It is found that for a chain to exhibit good adhesive properties the chain configuration should consist of fibrils-elongated, aligned sections of polymers and cavities which dissipate the applied energy. A fibrillation index is defined to quantify the quality of fibrils. We focus on the molecular properties of the polymer chain, which can lead to large amounts of fibrillation, and find that both strong attraction between the polymer and substrate and good solvency conditions are important conditions for this. We also vary the stiffness of the chain and find that for less stiff chains a plateau in the stress-strain curve gives rise to good adhesion however for very stiff chains there is limited elongation of the chain but the chain can still exhibit good fibrillation by a lamella-like rearrangement. Finally, it is found that the detachment time, t, of a polymer from the adsorbed substrate is inversely proportional to force, F (i.e., t ∝ F(-γ)), where exponent γ depends on the solvent quality, polymer-substrate attraction, and chain stiffness.

Isolation of Pristine Electronics Grade Semiconducting Carbon Nanotubes by Switching the Rigidity of the Wrapping Polymer Backbone on Demand

Conjugated polymers are among the most selective carbon nanotube sorting agents discovered and enable the isolation of ultrahigh purity semiconducting singled-walled carbon nanotubes (s-SWCNTs) from heterogeneous mixtures that contain problematic metallic nanotubes. The strong selectivity though highly desirable for sorting, also leads to irreversible adsorption of the polymer on the s-SWCNTs, limiting their electronic and optoelectronic properties. We demonstrate how changes in polymer backbone rigidity can trigger its release from the nanotube surface. To do so, we choose a model polymer, namely poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-co-(6,60-(2,20-bipyridine))] (PFO-BPy), which provides ultrahigh selectivity for s-SWCNTs, which are useful specifically for FETs, and has the chemical functionality (BPy) to alter the rigidity using mild chemistry. Upon addition of Re(CO)5Cl to the solution of PFO-BPy wrapped s-SWCNTs, selective chelation with the BPy unit in the copolymer leads to the unwrapping of PFO-BPy. UV-vis, XPS, and Raman spectroscopy studies show that binding of the metal ligand complex to BPy triggers up to 85% removal of the PFO-BPy from arc-discharge s-SWCNTs (diameter = 1.3-1.7 nm) and up to 72% from CoMoCAT s-SWCNTs (diameter = 0.7-0.8 nm). Importantly, Raman studies show that the electronic structure of the s-SWCNTs is preserved through this process. The generalizability of this method is demonstrated with two other transition metal salts. Molecular dynamics simulations support our experimental findings that the complexation of BPy with Re(CO)5Cl in the PFO-BPy backbone induces a dramatic conformational change that leads to a dynamic unwrapping of the polymer off the nanotube yielding pristine s-SWCNTs.