Phase behaviors and membrane properties of model liposomes: Temperature effect

Kinetic control of liposome size by direct lipid transfer

Spontaneous lipid vesiculation and related size distribution are traditionally studied in the framework of equilibrium thermodynamics and continuum mechanics, overlooking the kinetic aspects of the process. In the scenario of liposomes consisting of different lipid molecules dispersed in the same medium - a non-equilibrium situation -, the system evolves driven by lipid monomer transfer among the different liposomes. This process encompasses time-dependent changes in liposome size and size distribution, thus predicting size and composition at a given time would entail the control of the size of liposomes by kinetic means, an asset in the framework of diagnostics and synthetic biology. We introduce a direct transfer model, based on the fact that monomers are highly reactive species and apply it to saturated phospholipid molecules differing in hydrophobic chain length. Considering a well-defined gamma-type liposome size distribution, we demonstrate a clear liposome size-composition correlation and are able to predict liposome size and size distribution at any time in the transfer process. The size-composition correlation opens up new prospects for the control of the self-assembling properties of lipids and thereby the control of the liposome size.

Liposome-loaded polymeric microneedles for enhanced skin deposition of rifampicin

Methicillin-resistant Staphylococcus aureus (MRSA) is a prevailing bacterial pathogen linked to superficial skin and soft tissue infections (SSTIs). Rifampicin (RIF), a potent antibiotic against systemic and localised staphylococcal infections, faces limitations due to its low solubility. This constraint hampers its therapeutic potential for MRSA-induced SSTIs. To address this, an advanced liposomal system was designed for efficient dermal RIF delivery. Rifampicin-loaded liposomes (LipoRIF) were embedded within polymeric dissolving microneedles (DMNs) to enable targeted intradermal drug delivery. A robust Design of Experiment (DoE) methodology guided the systematic preparation and optimisation of LipoRIF formulations. The optimal LipoRIF formulation integrated within polymeric DMNs. These LipoRIF-DMNs exhibited favourable mechanical properties and effective skin insertion characteristics. Notably, in vitro assays on skin deposition unveiled a transformative result - the DMN platform significantly enhanced LipoRIF deposition within the skin, surpassing LipoRIF dispersion alone. Moreover, LipoRIF-DMNs displayed minimal cytotoxicity toward cells. Encouragingly, rigorous in vitro antimicrobial evaluations demonstrated LipoRIF-DMNs' capacity to inhibit MRSA growth compared to the control group. LipoRIF-DMNs propose a potentially enhanced, minimally invasive approach to effectively manage SSTIs and superficial skin ailments stemming from MRSA infections.

Lipid Oxidation: Role of Membrane Phase-Separated Domains

Lipid oxidation is associated with several inflammatory and neurodegenerative diseases, but many questions to unravel its effects on biomembranes are still open due to the complexity of the topic. For instance, recent studies indicated that phase-separated domains can have a significant effect on membrane function. It is reported that domain interfaces are "hot spots" for pore formation, but the underlying mechanisms and the effect of oxidation-induced phase separation on membranes remain elusive. Thus, to evaluate the permeability of the membrane coexisting of liquid-ordered (Lo) and liquid-disordered (Ld) domains, we performed atomistic molecular dynamics simulations. Specifically, we studied the membrane permeability of nonoxidized or oxidized homogeneous membranes (single-phase) and at the Lo/Ld domain interfaces of heterogeneous membranes, where the Ld domain is composed of either oxidized or nonoxidized lipids. Our simulation results reveal that the addition of only 1.5% of lipid aldehyde molecules at the Lo/Ld domain interfaces of heterogeneous membranes increases the membrane permeability, whereas their addition at homogeneous membranes does not have any effect. This study is of interest for a better understanding of cancer treatment methods based on oxidative stress (causing among others lipid oxidation), such as plasma medicine and photodynamic therapy.

Enhancing azithromycin antibacterial activity by encapsulation in liposomes/liposomal-N-acetylcysteine formulations against resistant clinical strains of Escherichia coli

E. coli is an Enterobacteriaceae that could develop resistance to various antibiotics and become a multi-drug resistant (MDR) bacterium. Options for treating MDR E. coli are limited and the pipeline is somewhat dry when it comes to antibiotics for MDR bacteria, so we aimed to explore more options to help in treating MDR E. coli. The purpose of this study is to examine the synergistic effect of a liposomal formulations of co-encapsulated azithromycin and N-acetylcysteine against E. coli. Liposomal azithromycin (LA) and liposomal azithromycin/N-acetylcysteine (LAN) were compared to free azithromycin. A broth dilution was used to measure the MIC and MBC of both formulations. The biofilm reduction activity, thermal stability measurements, stability studies, and cell toxicity analysis were performed. LA and LAN effectively reduced the MIC of E. coli SA10 strain, to 3 μg/ml and 2.5 μg/ml respectively. LAN at 1 × MIC recorded a 93.22% effectiveness in reducing an E. coli SA10 biofilm. The LA and LAN formulations were also structurally stable to 212 ± 2 °C and 198 ± 3 °C, respectively. In biological conditions, the formulations were largely stable in PBS conditions; however, they illustrated limited stability in sputum and plasma. We conclude that the formulation presented could be a promising therapy for E. coli resistance circumstances, providing the stability conditions have been enhanced.

Physicochemical properties of L-alpha dipalmitoyl phosphatidylcholine large unilamellar vesicles: Effect of hydrophobic block (PLA/PCL) of amphipathic diblock copolymers

In the present work, we show how amphipathic diblock copolymers affect the physicochemical properties of the lipid bilayer of DPPC liposome. Diblock copolymers proposed for this study are focused in the difference between PLA and PCL hydrophobic block, because PLA and PCL differ in their glass transition temperature, where a higher ratio of PLA, lowers the flexibility of the diblock copolymer. On the contrary, a greater proportion of PCL makes the diblock copolymer more flexible. This flexibility difference between hydrophobic block would affect the physicochemical properties of lipid bilayer of DPPC. The difference of rigidity or flexibility of hydrophobic block and their interaction with DPPC large unilamellar vesicles (LUVs) was evaluated at low and high copolymers concentration. The copolymer concentrations used were chosen based on their respective cmc. We measure (a) Thermotropic behavior from GP of Laurdan and fluorescence anisotropy of DPH; (b) Relation between wavelength excitation and generalized polarization of Laurdan; (c) Time-resolved fluorescence anisotropy of DPH; (d) Water outflow through the lipid bilayer and (e) calcein release from DPPC LUVs. Furthermore, large unilamellar vesicles in the absence and in the presence of different copolymers were characterized by size and zeta-potential. The results show that the diblock copolymer at high PLA/PCL ratio, that is, greater rigidity of hydrophobic block produces an increase of the phase transition temperature (Tm). For DPPC LUVs, Tm increase 3.5 °C at low and about 4.5 °C at high copolymers concentration, sensed by Laurdan and DPH fluorescent probes, although the DPPC/copolymers molar ratio for Cop4 is higher than Cop3, Cop2 and Cop1. In addition, we observed a decrease in the polarity of microenvironments in the bilayer and an increase in the order of the acyl chains in the bilayer to a high proportion of PLA. Furthermore, the presence of diblock copolymer with high proportion of PLA, decreases water outflow from DPPC liposome and water efflux is slower; leading to a decrease in calcein release from DPPC liposomes. Our results clearly show that the greater the stiffness of the hydrophobic block, greater degree of packaging of the lipid bilayer, greater the order of the acyl chains, and greater retention of water and calcein inside the liposome. Therefore, the presence of AB-type diblock copolymers with a more rigid hydrophobic block, stabilizes the lipid bilayer and would allow a more controlled release of water, and encapsulated molecules inside of the DPPC liposome.

Osmotic stress and pore nucleation in charged biological nanoshells and capsids

A model system is proposed to investigate the chemical equilibrium and mechanical stability of biological spherical-like nanoshells in contact with an aqueous solution with added dissociated electrolyte of a given concentration. The ionic chemical equilibrium across the permeable shell is investigated in the framework of an accurate Density Functional Theory (DFT) that incorporates electrostatic and hardcore correlations beyond the traditional mean-field (e.g., Poisson-Boltzmann) limit. The accuracy of the theory is tested by a direct comparison with Monte Carlo (MC) simulations. A simple analytical expression is then deduced which clearly highlights the entropic, electrostatic, and self-energy contributions to the osmotic stress over the shell in terms of the calculated ionic profiles. By invoking a continuum mean-field elastic approach to account for the shell surface stress upon osmotic stretching, the mechanical equilibrium properties of the shell under a wide variety of ionic strengths and surface charges are investigated. The model is further coupled to a continuum mechanical approach similar in structure to a Classical Nucleation Theory (CNT) to address the question of mechanical stability of the shells against a pore nucleation. This allows us to construct a phase diagram which delimits the mechanical stability of capsids for different ionic strengths and shell surface charges.

Liposomes Containing Nickel-Bis(dithiolene) Complexes for Photothermal Theranostics

New thermosensitive liposomes with a phase transition at 42 °C, containing nickel-bis(dithiolene) complexes as efficient and stable photothermal agents, have been formulated and characterized. These liposomes are highly stable and keep their contents at 37 °C for more than 30 days. On the contrary, the mild hyperthermia generated by the nickel-bis(dithiolene) complex under 940 nm NIR irradiation allows for the fine controlled release of the liposome contents, making such liposomes highly suitable for on-demand drug delivery in the human body under NIR laser irradiation. These liposomes can also be directly used, as shown here, as nanoagents for photothermal therapy. In fact, strong cell death can be generated under laser irradiation in the presence of these photothermally active nanocargos containing less than 10% w/w of metal complex. We also demonstrate, for the first time, that nickel-bis(dithiolene) complexes are good photoacoustic agents, generating easily detectable ultrasonic signals directly proportional to the concentration of complexes and the used laser power.

Simulation of fluid/gel phase equilibrium in lipid vesicles

Simulation of single component dipalmitoylphosphatidylcholine (DPPC) coarse-grained DRY-MARTINI lipid vesicles of diameter 10 nm (1350 lipids), 20 nm (5100 lipids) and 40 nm (17 600 lipids) is performed using statistical temperature molecular dynamics (STMD), to study finite size effects upon the order-disorder gel/fluid transition. STMD obtains enhanced sampling using a generalized ensemble, obtaining a flat energy distribution between upper and lower cutoffs, with little computational cost over canonical molecular dynamics. A single STMD trajectory of moderate length is sufficient to sample 20+ transition events, without trapping in the gel phase, and obtain well averaged properties. Phase transitions are analyzed via the energy-dependence of the statistical temperature, T_S(U). The transition temperature decreases with decreasing diameter, in agreement with experiment, and the transition changes from first order to borderline first-second order. The size- and layer-dependence of the structure of both stable phases, and of the pathway of the phase transition, are determined. It is argued that the finite size effects are primarily caused by the disruption of the gel packing by curvature. Inhomogeneous states with faceted gel patches connected by unusual fluid seams are observed at high curvature, with visually different structure in the inner and outer layers due to the different curvatures. Thus a simple physical picture describes phase transitions in nanoscale finite systems far from the thermodynamic limit.

Liposomal formulation of hypoxia activated prodrug for the treatment of ovarian cancer

In this work, a new sphingomyelin-cholesterol liposomal formulation (CPD100Li) for the delivery of a hypoxia activated prodrug of vinblastine, mon-N-oxide (CPD100), is developed. The optimized liposomal formulation uses an ionophore (A23187) mediated pH-gradient method. Optimized CPD100Li is characterized for size, drug loading, and stability. The in vitro toxicity of CPD100Li is assessed on different aspects of cell proliferation and apoptosis of ES2 ovarian cancer under normoxic and hypoxic conditions. The pharmacokinetics of CPD100Li in mice as well as the influence of A23187 on the retention of CPD100 are assessed. The dose limiting toxicity (DLT) and maximum tolerated dose (MTD) for CPD100Li are evaluated in nude mice. CPD100 is loaded in the liposome at 5.5 mg/mL. The sizes of CPD100Li using DLS, qNano and cryo-TEM techniques are 155.4 ± 4.2 nm, 132 nm, and 112.6 ± 19.8 nm, respectively. There is no difference between the in vitro characterization of CPD100Li with and without ionophore. Freshly prepared CPD100Li with ionophore are stable for 48 h at 4 °C, while the freeze-dried formulation is stable for 3 months under argon at 4 °C. The hypoxic cytotoxicity ratios (HCR) of CPD100 and CPD100Li are 0.16 and 0.11, respectively. CPD100Li under hypoxic conditions has a 9.2-fold lower IC₅₀ value as compared to CPD100Li under normoxic conditions, confirming the hypoxia dependent activation of CPD100. CPD100Li treated ES2 cells show a time dependent enhanced cell death, along with caspase production and an increase in the number of cells in G₀/G₁ and higher cell arrest. The blood concentration profile of CPD100Li in mice without A23187 has a 12.6-fold lower area under the curve (AUC) and 1.6-fold lower circulation time compared to the CPD100Li with A23187. The DLT for both CPD100 and CPD100Li is 45 mg/kg and the MTD is 40 mg/kg in nude mice. Based on the preliminary data obtained, we clearly show that the presence of ionophore affects the in vivo stability of CPD100. CPD100Li presents a unique opportunity to develop a first-in-kind chemotherapy product based on achieving selective drug activation through the hypoxic physiologic microenvironment of solid tumors.

Predicting the tissue depth for remote triggering of drug delivery systems

Externally triggerable drug delivery systems have promising potential in providing flexible control of the timing, duration, and intensity of treatment according to patient's needs, while reducing side effects and increasing therapeutic efficacy. However, a limitation to translating such systems into clinical practice is the difficulty to predict the tissue depth at which such systems could be safely used in vivo (e.g. activatable at the target site with a clinically-safe energy dosage). An effective method is needed to evaluate the clinical potential of externally triggerable drug delivery systems. Here we have a method and approach to predicting the tissue depth at which a drug delivery system can be safely triggered in vivo by an external energy source. We used in vitro and ex vivo experiments combined with a mathematical model to develop a method to predict activated drug release at different tissue depths, which was then validated in vivo. We constructed these models for liposomal drug delivery systems triggered by two of the most commonly studied external stimuli: ultrasound and near infrared light. We developed the approach in two prevalent tissue types: muscle and fat. Our method identified two important parameters in the activation of drug delivery systems in tissue: 1) the ability of the activating energy to penetrate tissue, 2) the sensitivity of the system to the activation source. The method was validated by correlation with triggered sciatic nerve block in the rat in vivo, demonstrating that this approach provided an accurate estimate of activated release at different tissue depths.

Binding, folding and insertion of a β-hairpin peptide at a lipid bilayer surface: Influence of electrostatics and lipid tail packing

Antimicrobial peptides (AMPs) act as host defenses against microbial pathogens. Here we investigate the interactions of SVS-1 (KVKVKVKV^dP^lPTKVKVKVK), an engineered AMP and anti-cancer β-hairpin peptide, with lipid bilayers using spectroscopic studies and atomistic molecular dynamics simulations. In agreement with literature reports, simulation and experiment show preferential binding of SVS-1 peptides to anionic over neutral bilayers. Fluorescence and circular dichroism studies of a Trp-substituted SVS-1 analogue indicate, however, that it will bind to a zwitterionic DPPC bilayer under high-curvature conditions and folds into a hairpin. In bilayers formed from a 1:1 mixture of DPPC and anionic DPPG lipids, curvature and lipid fluidity are also observed to promote deeper insertion of the fluorescent peptide. Simulations using the CHARMM C36m force field offer complementary insight into timescales and mechanisms of folding and insertion. SVS-1 simulated at an anionic mixed POPC/POPG bilayer folded into a hairpin over a microsecond, the final stage in folding coinciding with the establishment of contact between the peptide's valine sidechains and the lipid tails through a "flip and dip" mechanism. Partial, transient folding and superficial bilayer contact are seen in simulation of the peptide at a zwitterionic POPC bilayer. Only when external surface tension is applied does the peptide establish lasting contact with the POPC bilayer. Our findings reveal the influence of disruption to lipid headgroup packing (via curvature or surface tension) on the pathway of binding and insertion, highlighting the collaborative effort of electrostatic and hydrophobic interactions on interaction of SVS-1 with lipid bilayers.

Coarse-grained molecular simulations of the melting kinetics of small unilamellar vesicles

Simulations of small unilamellar lipid bilayer vesicles have been performed to model their response to an instantaneous rise in temperature, starting from an initial low-temperature structure, to temperatures near or above the main chain transition temperature. The MARTINI coarse-grained force-field was used to construct slabs of gel-phase DPPC bilayers, which were assembled into truncated icosahedral structures containing 13,165 or 31,021 lipids. Equilibration at 280 K produced structures with several (5-8) domains, characterized by facets of lipids packed in the gel phase connected by disordered ridges. Instantaneous heating to final temperatures ranging from 290 K to 310 K led to partial or total melting over 500 ns trajectories, accompanied by changes in vesicle shape and the sizes and arrangements of remaining gel-phase domains. At temperatures that produced partial melting, the gel-phase lipid content of the vesicles followed an exponential decay, similar in form and timescale to the sub-microsecond phase of melting kinetics observed in recent ultrafast IR temperature-jump experiments. The changing rate of melting appears to be the outcome of a number of competing contributions, but changes in curvature stress arising from the expansion of the bilayer area upon melting are a major factor. The simulations give a more detailed picture of the changes that occur in frozen vesicles following a temperature jump, which will be of use for the interpretation of temperature-jump experiments on vesicles.

Negative and positive temperature dependence of potassium leak in MscS mutants: Implications for understanding thermosensitive channels

Bacterial mechanosensitive channel of small conductance (MscS) is a protein, whose activity is modulated by membrane tension, voltage and cytoplasmic crowding. MscS is a homoheptamer and each monomer consists of three transmembrane helices (TM1-3). Hydrophobic pore of the channel is made of TM3s surrounded by peripheral TM1/2s. MscS gating is a complex process, which involves opening and inactivation in response to the increase of membrane tension. A number of MscS mutants were isolated. Among them mutants affecting gating have been found including gain-of-function (GOF) and loss-of-function (LOF) that open at lower or at higher thresholds, respectively. Previously, using an in vivo screen we isolated multiple MscS mutants that leak potassium and some of them were GOF or LOF. Here we show that for a subset of these mutants K+ leak is negatively (NTD) or positively (PTD) temperature dependent. We show that temperature reliance of these mutants does not depend on how MS gating is affected by a particular mutation. Instead, we argue that NTD or PTD leak is due to the opposite allosteric coupling of the structures that determine the temperature dependence to the channel gate. In PTD mutants an increased hydration of the pore vestibule is directly coupled to the increase in the channel conductance. In NTD mutants, at higher temperatures an increased hydration of peripheral structures leads to complete separation of TM3 and a pore collapse.