Polarization-dependent exciton dynamics in tetracene single crystals

Singlet Fission in Perylene Monoimide Single Crystals and Polycrystalline Films

Singlet fission (SF) is a spin-allowed process in which a photogenerated singlet exciton down-converts into two triplet excitons. Perylene-3,4-dicarboximide (PMI) has singlet and triplet state energies of 2.4 and 1.1 eV, respectively; thus making SF slightly exoergic and providing triplet excitons that have sufficient energy to raise the efficiency of single-junction solar cells by reducing thermalization losses from hot excitons formed when absorbed photons have energies higher than the semiconductor bandgap. However, PMI SF in the solid state has not been studied previously. Here, we show that 2,5-diphenyl-N-(2-ethylhexyl)perylene-3,4-dicarboximide (dp-PMI) crystallizes into a slip-stacked intermolecular morphology favorable for SF. Transient absorption microscopy and spectroscopy show that dp-PMI SF occurs in ≤50 ps in both single crystals and polycrystalline thin films with a triplet yield of 150 ± 20%. Ultrafast SF in the solid state, the high triplet yield, and its photostability make dp-PMI an attractive candidate for SF-enhanced solar cells.

Effective Negative Diffusion of Singlet Excitons in Organic Semiconductors

Using diffraction-limited ultrafast imaging techniques, we investigate the propagation of singlet and triplet excitons in single-crystal tetracene. Instead of an expected broadening, the distribution of singlet excitons narrows on a nanosecond time scale after photoexcitation. This narrowing results in an effective negative diffusion in which singlet excitons migrate toward the high-density region, eventually leading to a singlet exciton distribution that is smaller than the laser excitation spot. Modeling the excited-state dynamics demonstrates that the origin of the anomalous diffusion is rooted in nonlinear triplet-triplet annihilation (TTA). We anticipate that this is a general phenomenon that can be used to study exciton diffusion and nonlinear TTA rates in semiconductors relevant for organic optoelectronics.

Using temperature dependent fluorescence to evaluate singlet fission pathways in tetracene single crystals

The temperature-dependent fluorescence spectrum, decay rate, and spin quantum beats are examined in single tetracene crystals to gain insight into the mechanism of singlet fission. Over the temperature range of 250 K-500 K, the vibronic lineshape of the emission indicates that the singlet exciton becomes localized at 400 K. The fission process is insensitive to this localization and exhibits Arrhenius behavior with an activation energy of 550 ± 50 cm^-1. The damping rate of the triplet pair spin quantum beats in the delayed fluorescence also exhibits an Arrhenius temperature dependence with an activation energy of 165 ± 70 cm^-1. All the data for T > 250 K are consistent with direct production of a spatially separated ¹(T⋯T) state via a thermally activated process, analogous to spontaneous parametric downconversion of photons. For temperatures in the range of 20 K-250 K, the singlet exciton continues to undergo a rapid decay on the order of 200 ps, leaving a red-shifted emission that decays on the order of 100 ns. At very long times (≈1 µs), a delayed fluorescence component corresponding to the original S₁ state can still be resolved, unlike in polycrystalline films. A kinetic analysis shows that the redshifted emission seen at lower temperatures cannot be an intermediate in the triplet production. When considered in the context of other results, our data suggest that the production of triplets in tetracene for temperatures below 250 K is a complex process that is sensitive to the presence of structural defects.

Singlet Fission Dynamics in Tetracene Single Crystals Probed by Polarization-Dependent Two-Dimensional Electronic Spectroscopy

The exact mechanism of endothermic singlet fission in crystalline polyacene remains to be clarified. It has been elusive whether the excess energy of vibrational hot states and the upper branch of Davydov splitting is important for the energy compensation. Here, we probe the excited-state specified singlet fission dynamics in tetracene single crystals by polarization-dependent two-dimensional electronic spectroscopy (2DES). While a major spectral transfer with a characteristic lifetime of 86 ps is observed to be largely independent of the excitation energy due to formation of the spatially separated triplet pairs (¹(T···T)), the excitation-energy dependent subpicosecond dynamics show marked differences for different states probed, implying the possible involvement of a coherently formed triplet pair state (¹(TT)). Analysis of coherent vibrational modes suggests the coupling to high energy modes may offset the energy difference between singlet and triplet pair states. Moreover, the beating map of the low frequency mode indicates a vibrational hot state violating the aggregation behavior of Davydov exciton, which can be explained as a resonance of the ¹(TT) state. These results suggest that the coherent vibronic mixing between local excitation and triplet pair states is essential for the singlet fission dynamics in molecule aggregates.

Anisotropic Singlet Fission in Single Crystalline Hexacene

Singlet fission is known to improve solar energy utilization by circumventing the Shockley-Queisser limit. The two essential steps of singlet fission are the formation of a correlated triplet pair and its subsequent quantum decoherence. However, the mechanisms of the triplet pair formation and decoherence still remain elusive. Here we examined both essential steps in single crystalline hexacene and discovered remarkable anisotropy of the overall singlet fission rate along different crystal axes. Since the triplet pair formation emerges on the same timescale along both crystal axes, the quantum decoherence is likely responsible for the directional anisotropy. The distinct quantum decoherence rates are ascribed to the notable difference on their associated energy loss according to the Redfield quantum dissipation theory. Our hybrid experimental/theoretical framework will not only further our understanding of singlet fission, but also shed light on the systematic design of new materials for the third-generation solar cells.

Resonance Raman Characterization of Tetracene Monomer and Nanocrystals: Excited State Lattice Distortions With Implications For Efficient Singlet Fission

The characterization of specific phonon modes and exciton states that lead to efficient singlet fission (SF) may be instrumental in the design of the next generation of high-efficiency photovoltaic devices. To this end, we analyze the absolute resonance Raman (RR) cross sections for tetracene (Tc) both as a monomer in solution and as a crystalline solid in an aqueous suspension of nanocrystals. For both systems, a time-dependent wavepacket model is developed that is consistent with the absolute RR cross sections, the magnitude of the absorption cross sections, and the vibronic line shapes of the fluorescence. In the monomer, the intramolecular reorganization energy is between 1500 and 1800 cm^-1 and the solvent reorganization energy is 70 cm^-1. In nanocrystals, the total reorganization is diminished to less than 600 cm^-1. The lowest energy exciton has an estimated intramolecular reorganization energy between 300 and 500 cm^-1 while intermolecular librational phonons have a reorganization energy of about 130 cm^-1. The diminished reorganization energy of the nanocrystal is interpreted in the context of the delocalization of the band-edge exciton onto about ∼7 molecules. When electron and electron-hole correlations are included within many-body perturbation theory, the polarized absorption spectra of crystalline Tc are calculated and found to be in agreement with experiment. The low-lying exciton states and optically active phonons that contribute to the polarized crystal absorption are identified. The likely role of coherent exciton phonon evolution in the SF process is discussed.

Quantum Interference in Singlet Fission: J- and H-Aggregate Behavior

The quantum interference in singlet fission (SF) among the multiple pathways from singlet excited states to correlated triplet pair states is comprehensively investigated. The analytical analysis reveals that this interference is strongly affected by the exciton-exciton coupling and is closely related to the property of J- and H-type of aggregates. Different from the interference in the spectra of aggregates, which depends only on the sign of exciton-exciton coupling, the interference in SF is additionally related to the signs of couplings between singlet excited states and triplet pair states. The interference dynamics is further demonstrated numerically by a time-dependent wavepacket diffusion method with electron-phonon interactions incorporated. Finally, we take a pentacene dimer as a concrete example to show how to adjust the constructive and destructive interferences in SF dynamics in terms of J-/H-aggregate behaviors. The results presented here may provide guiding principles for designing efficient SF materials through directly tuning quantum interference via morphology engineering.

Singlet Fission in a Covalently Linked Cofacial Alkynyltetracene Dimer

Singlet fission is a process in which a singlet exciton converts into two triplet excitons. To investigate this phenomenon, we synthesized two covalently linked 5-ethynyl-tetracene (ET) dimers with differing degrees of intertetracene overlap: BET-X, with large, cofacial overlap of tetracene π-orbitals, and BET-B, with twisted arrangement between tetracenes exhibits less overlap between the tetracene π-orbitals. The two compounds were crystallographically characterized and studied by absorption and emission spectroscopy in solution, in PMMA and neat thin films. The results show that singlet fission occurs within 1 ps in an amorphous thin film of BET-B with high efficiency (triplet yield: 154%). In solution and the PMMA matrix the S1 of BET-B relaxes to a correlated triplet pair (1)(T1T1) on a time scale of 2 ps, which decays to the ground state without forming separated triplets, suggesting that triplet energy transfer from (1)(T1T1) to a nearby chromophore is essential for producing free triplets. In support of this hypothesis, selective excitation of BET-B doped into a thin film of diphenyltetracene (DPT) leads to formation of the (1)(T1T1) state of BET-B, followed by generation of both DPT and BET-B triplets. For the structurally cofacial BET-X, an intermediate forms in <180 fs and returns to the ground state more rapidly than BET-B. First-principles calculations predict a 2 orders of magnitude faster rate of singlet fission to the (1)(T1T1) state in BET-B relative to that of crystalline tetracene, attributing the rate increase to greater coupling between the S1 and (1)(T1T1) states and favorable energetics for formation of the separated triplets.