Method and apparatus for characterization of electric field-induced aggregation in pre-crystalline protein solutions

In situ characterization of the agglutination of lectins via cross-linking of carbohydrates by time-resolved measurement of forward static light scattering

We present real-time observations of a structurally variable process for cross-linking agglutination between multivalent lectins and glycoclusters using a small-angle forward static light scattering (F-SLS) technique. In this study, a cross-linking agglutination reaction was carried out using a tetravalent Neu5Acα2,6LacNAc-glycocluster and Sambucus sieboldiana agglutinin (SSA). The scattering intensity of time-resolved F-SLS increased with formation of the Neu5Acα2,6LacNAc-glycocluster-SSA cross-linked complex. Using this approach, fine sequential cross-linking agglutination between glycoclusters and lectins was observed in real-time. The rate of increase in the intensity of time-resolved F-SLS increased with the concentration of sialo-glycoclusters and SSA. Structural analysis based on the fractal dimension using time-resolved F-SLS patterns revealed that the density of the aggregates changed with progression of the cross-linking reaction until equilibrium was reached. This is the first report to evaluate the cross-linking agglutination reaction between glycoclusters and lectins and analysis of the subsequent structure of the obtained aggregates using time-resolved measurements of F-SLS.

Application of electric fields for controlling crystallization

This highlight gives a helicopter view on the application of electric fields and discusses its potential future applications.

Electric treatment for hydrophilic ink deinking

Hydrophilic inks have been widely used due to higher printing speed, competitive cost and being healthy non-organic solvents. However, they cause problems in both product quality and process runnability due to their hydrophilic surface wettability, strong negative surface charge and sub-micron size. Electric treatment was shown to be able to increase the ink sizes from 60 nm to 700 nm through electrocoagulation and electrophoresis. In addition, electric treatment assisted flotation could reduce effective residual ink concentration (ERIC) by 90 ppm, compared with only 20 ppm by traditional flotation. Furthermore, the effect of electric treatment alone on ink separation was investigated by two anode materials, graphite and stainless steel. Both of them could remove hydrophilic inks with less than 1% yield loss via electroflotation and electrophoresis. But graphite is a better material as the anode because graphite reduced ERIC by an additional 100 ppm. The yield loss of flotation following electric treatment was also lower by 17% if graphite was the anode material. The difference between the two electrode materials resulted from electrocoagulation and ink redeposition during electric treatment. An electric pretreatment-flotation-hyperwashing process was conducted to understand the deinking performance in conditions similar to a paper mill, and the ERIC was reduced from 950 ppm to less than 400 ppm.

Nano metamaterials for ultrasensitive Terahertz biosensing

As a candidate for a rapid detection of biomaterials, terahertz (THz) spectroscopy system can be considered with some advantage in non-destructive, label-free, and non-contact manner. Because protein-ligand binding energy is in the THz range, especially, most important conformational information in molecular interactions can be captured by THz electromagnetic wave. Based on the THz time-domain spectroscopy system, THz nano-metamaterial sensing chips were prepared for great enhancing of detection sensitivity. A metamaterial sensing chip was designed for increasing of absorption cross section of the target sample, related to the transmitted THz near field enhancement via the composition of metamaterial. The measured THz optical properties were then analyzed in terms of refractive index and absorption coefficient, and compared with simulation results. Also, virus quantification regarding various concentrations of the viruses was performed, showing a clear linearity. The proposed sensitive and selective THz detection method can provide abundant information of detected biomaterials to help deep understanding of fundamental optical characteristics of them, suggesting rapid diagnosis way especially useful for such dangerous and time-sensitive target biomaterials.

Colloid Deposit Morphology and Clogging in Porous Media: Fundamental Insights Through Investigation of Deposit Fractal Dimension

Experiments reveal a wide discrepancy between the permeability of porous media containing colloid deposits and the available predictive equations. Evidence suggests that this discrepancy results, in part, from the predictive equations failing to account for colloid deposit morphology. This article reports a series of experiments using static light scattering (SLS) to characterize colloid deposit morphology within refractive index matched (RIM) porous media during flow through a column. Real time measurements of permeability, specific deposit, deposit fractal dimension, and deposit radius of gyration, at different vertical positions, were conducted with initially clean porous media at various ionic strengths and fluid velocities. Decreased permeability (i.e., increased clogging) corresponded with higher specific deposit, lower fractal dimension, and smaller radius of gyration. During deposition, fractal dimension, radius of gyration, and permeability decreased with increasing specific deposit. During flushing with colloid-free fluid, these trends reversed, with increased fractal dimension, radius of gyration, and permeability. These observations suggest a deposition scenario in which large and uniform aggregates become deposits, which reduce porosity, lead to higher fluid shear forces, which then decompose the deposits, filling the pore space with small and dendritic fragments of aggregate.