Measurement of single leukemia cell's density and mass using optically induced electric field in a microfluidics chip

A bi-component model to assess the rheology of soft cellular aggregates probed using the micropipette aspiration technique

The micro-pipette aspiration technique is a classical experiment used to characterize the physical properties of inert fluids and biological soft materials such as cellular aggregates. The physical parameters of the fluid, as viscosity and interfacial tension, are obtained by studying how the fluid enters the pipette when the suction pressure is increased and how it relaxes when the suction pressure is put to zero. A mathematical model representative of the experiment is needed to extrapolate the physical parameters of the fluid-like matter; however, for biological materials as cells or cell aggregates these models are always based on strong starting hypotheses that impact the significance of the identified parameters. In this article, starting from the bi-constituent nature of the cell aggregate, we derive a general mathematical model based of a Cahn-Hilliard-Navier-Stokes set of equations. The model is applied to describe quantitatively the aspiration-retraction dynamics of a cell-aggregate into and out of a pipette. We demonstrate the predictive capability of the model and highlight the impact of the assumptions made on the identified parameters by studying two cases: one with a non-wetting condition between the cells and the wall of the pipette (classical assumption in the literature) and the second one, which is more realistic, with a partial wetting condition (contact angle θs = 150°). Furthermore, our results provide a purely physical explanation to the asymmetry between the aspiration and retraction responses which is alternative to the proposed hypothesis of an mechano-responsive alteration of the surface tension of the cell aggregate. STATEMENT OF SIGNIFICANCE: Our study introduces a general mathematical model, based on the Cahn-Hilliard-Navier-Stokes equations, tailored to model micro-pipette aspiration of cell aggregates. The model accounts for the multi-component structure of the cell aggregate and its intrinsic viscoelastic rheology. By challenging prevailing assumptions, particularly regarding perfect non-wetting conditions and the mechano-responsive alteration of cell surface tension, we demonstrate the reliability of the mathematical model and elucidate the mechanisms at play, offering a purely physical explanation for observed asymmetries between the aspiration and retraction stages of the experiment.

Biomechanics of circulating cellular and subcellular bioparticles: beyond separation

Biomechanical attributes have emerged as novel markers, providing a reliable means to characterize cellular and subcellular fractions. Numerous studies have identified correlations between these factors and patients' medical status. However, the absence of a thorough overview impedes their applicability in contemporary state-of-the-art therapeutic strategies. In this context, we provide a comprehensive analysis of the dimensions, configuration, rigidity, density, and electrical characteristics of normal and abnormal circulating cells. Subsequently, the discussion broadens to encompass subcellular bioparticles, such as extracellular vesicles (EVs) enriched either from blood cells or other tissues. Notably, cell sizes vary significantly, from 2 μm for platelets to 25 μm for circulating tumor cells (CTCs), enabling the development of size-based separation techniques, such as microfiltration, for specific diagnostic and therapeutic applications. Although cellular density is relatively constant among different circulating bioparticles, it allows for reliable density gradient centrifugation to isolate cells without altering their native state. Additionally, variations in EV surface charges (-6.3 to -45 mV) offer opportunities for electrophoretic and electrostatic separation methods. The distinctive mechanical properties of abnormal cells, compared to their normal counterparts, present an exceptional opportunity for diverse medical and biotechnological approaches. This review also aims to provide a holistic view of the current understanding of popular techniques in this domain that transcend conventional boundaries, focusing on early harvesting of malignant cells from body fluids, designing effective therapeutic options, cell targeting, and resonating with tissue and genetic engineering principles.

A computational model for the transit of a cancer cell through a constricted microchannel

We propose a three-dimensional computational model to simulate the transient deformation of suspended cancer cells flowing through a constricted microchannel. We model the cell as a liquid droplet enclosed by a viscoelastic membrane, and its nucleus as a smaller stiffer capsule. The cell deformation and its interaction with the suspending fluid are solved through a well-tested immersed boundary lattice Boltzmann method. To identify a minimal mechanical model that can quantitatively predict the transient cell deformation in a constricted channel, we conduct extensive parametric studies of the effects of the rheology of the cell membrane, cytoplasm and nucleus and compare the results with a recent experiment conducted on human leukaemia cells. We find that excellent agreement with the experiment can be achieved by employing a viscoelastic cell membrane model with the membrane viscosity depending on its mode of deformation (shear versus elongation). The cell nucleus limits the overall deformation of the whole cell, and its effect increases with the nucleus size. The present computational model may be used to guide the design of microfluidic devices to sort cancer cells, or to inversely infer cell mechanical properties from their flow-induced deformation.

Measurement of Charge and Refractive Indices in Optically Trapped and Ionized Living Cells

The post-ionization dynamics of chemo-treated and untreated 4T1 breast cancer cells ionized by laser trapping techniques are studied. We have determined each cell's charge and refractive index by developing a theoretical model for the forces determining the post-ionization dynamics. The shift in a cell's refractive index due to an intense oscillating electric field was studied, and the results are reported here. We observed that a trapped cell, as it becomes charged, will eventually exit the trap perpendicular to the beam's direction; this means that the electric force of the cell overcomes the trapping force. As a result, the cell's conductivity changes due to the oscillating field, causing a decrease in the cell's refractive index.

Recent advances in optically induced di-electrophoresis and its biomedical applications

The development of the micro/nano science and technology has promoted the evolvement of human civilization tremendously. The advancement of the micro/nano science and technology highly depends on the progress of the micro/nano manipulation techniques, and the micro/nano-scaled manipulation level is the critical sign of the micro/nano science and technology. This review, aimed at the demand and the challenge of the micro/nano material and biomedical fields and related to the scientific issues and implementation techniques of the optically induced di-electrophoresis (ODEP). We explained its working principle, manipulating method, and influencing factors of ODEP force to a certain extent. A number of application fields based-ODEP technology and specific applications so far are summarized and reviewed. Finally, some perspectives are provided on current development trends, future research directions, and challenges of ODEP.

Physical Forces in Glioblastoma Migration: A Systematic Review

The invasive capabilities of glioblastoma (GBM) define the cancer’s aggressiveness, treatment resistance, and overall mortality. The tumor microenvironment influences the molecular behavior of cells, both epigenetically and genetically. Current forces being studied include properties of the extracellular matrix (ECM), such as stiffness and “sensing” capabilities. There is currently limited data on the physical forces in GBM—both relating to how they influence their environment and how their environment influences them. This review outlines the advances that have been made in the field. It is our hope that further investigation of the physical forces involved in GBM will highlight new therapeutic options and increase patient survival. A search of the PubMed database was conducted through to 23 March 2022 with the following search terms: (glioblastoma) AND (physical forces OR pressure OR shear forces OR compression OR tension OR torsion) AND (migration OR invasion). Our review yielded 11 external/applied/mechanical forces and 2 tumor microenvironment (TME) forces that affect the ability of GBM to locally migrate and invade. Both external forces and forces within the tumor microenvironment have been implicated in GBM migration, invasion, and treatment resistance. We endorse further research in this area to target the physical forces affecting the migration and invasion of GBM.

Physical Cytometry: Detecting Mass-Related Properties of Single Cells

The physical properties of a single cell, such as mass, volume, and density, are important indications of the cell's metabolic characteristics and homeostasis. Precise measurement of a single cell's mass has long been a challenge due to its minute size. It is only in the past 10 years that a variety of instruments for measuring living cellular mass have emerged with the development of MEMS, microfluidics, and optics technologies. In this review, we discuss the current developments of physical cytometry for quantifying mass-related physical properties of single cells, highlighting the working principle, applications, and unique merits. The review mainly covers these measurement methods: single-cell mass cytometry, levitation image cytometry, suspended microchannel resonator, phase-shifting interferometry, and opto-electrokinetics cell manipulation. Comparisons are made between these methods in terms of throughput, content, invasiveness, compatibility, and precision. Some typical applications of these methods in pathological diagnosis, drug efficacy evaluation, disease treatment, and other related fields are also discussed in this work.

Optoelectronic tweezers: a versatile toolbox for nano-/micro-manipulation

This review covers the fundamentals, recent progress and state-of-the-art applications of optoelectronic tweezers technology, and demonstrates that optoelectronic tweezers technology is a versatile and powerful toolbox for nano-/micro-manipulation.

Measurement methods of single cell drug response

In the last decades, a wide multitude of research activity has been focused on the development of new drugs, and devoted to overcome the challenges of high cost and low efficiency in drug evaluation. The measurement of drug response at the single cell level is a quicker, more direct and more accurate way to reflect drug efficacy, which can shorten the drug development period and reduce research costs. Therefore, the single cell drug response (SCDR) measurement technology has aroused extensive attention from researchers, and has become a hot topic in the fields of drug research and cell biology. Recent years have seen the emergence of various SCDR measurement technologies that feature different working principles and different levels of measurement performance. To better examine, compare and summarize the characteristics and functions of these technologies, we select signal-to-noise ratio, throughput, content, invasion, and device complexity as the criteria to evaluate them from the drug efficacy perspective. This review aims to highlight sixteen kinds of SCDR measurement technologies, including patch-clamp technique, live-cell interferometry, capillary electrophoresis, secondary ion mass spectrometry, and more, and report widespread representative examples of SCDR measurement the recent approaches for over the past forty years. Based on their reaction principles, these technologies are classified into four categories: electrical, optical, electrochemical, and mass spectrometry, and a detailed comparison is made between them. After in-depth understanding of these technologies, it is expected to improve or integrate these technologies to propose better SCDR measurement strategies, and explore methods in new drug development and screening, as well as disease diagnosis and treatment.

Deformation of an Encapsulated Leukemia HL60 Cell through Sudden Contractions of a Microfluidic Channel

Migration of an encapsulated leukemia HL60 cell through sudden contractions in a capillary tube is investigated. An HL60 cell is initially encapsulated in a viscoelastic shell fluid. As the cell-laden droplet moves through the sudden contraction, shear stresses are experienced around the cell. These stresses along with the interfacial force and geometrical effects cause mechanical deformation which may result in cell death. A parametric study is done to investigate the effects of shell fluid relaxation time, encapsulating droplet size and contraction geometries on cell mechanical deformation. It is found that a large encapsulating droplet with a high relaxation time will undergo low cell mechanical deformation. In addition, the deformation is enhanced for capillary tubes with narrow and long contraction. This study can be useful to characterize cell deformation in constricted microcapillaries and to improve cell viability in bio-microfluidics.

Improving viability of leukemia cells by tailoring shell fluid rheology in constricted microcapillary

Encapsulated cell therapy has shown great potential in the treatment of several forms of cancer. Microencapsulation of these cancer cells can protect the core from the harmful effects of the neighboring cellular environment and can supply nutrients and oxygen. Such an encapsulation technique ensures cell viability and enables targeted drug delivery in cancer therapy. The cells immobilized with a biocompatible shell material can be isolated from the ambient and can move in constricted microcapillary. However, transportation of these cells through the narrow microcapillary may squeeze and mechanically damage the cells which threaten the cell viability. The cell type, conditions and the viscoelastic properties of the shell can dictate cell viability. A front-tracking numerical simulation shows that the engineered shell material with higher viscoelasticity improves the cell viability. It is also shown that low cortical tension of cells can contribute to lower cell viability.

Determination of Dielectric Properties of Cells using AC Electrokinetic-based Microfluidic Platform: A Review of Recent Advances

Cell dielectric properties, a type of intrinsic property of cells, can be used as electrophysiological biomarkers that offer a label-free way to characterize cell phenotypes and states, purify clinical samples, and identify target cancer cells. Here, we present a review of the determination of cell dielectric properties using alternating current (AC) electrokinetic-based microfluidic mechanisms, including electro-rotation (ROT) and dielectrophoresis (DEP). The review covers theoretically how ROT and DEP work to extract cell dielectric properties. We also dive into the details of differently structured ROT chips, followed by a discussion on the determination of cell dielectric properties and the use of these properties in bio-related applications. Additionally, the review offers a look at the future challenges facing the AC electrokinetic-based microfluidic platform in terms of acquiring cell dielectric parameters. Our conclusion is that this platform will bring biomedical and bioengineering sciences to the next level and ultimately achieve the shift from lab-oriented research to real-world applications.

A Review on Optoelectrokinetics-Based Manipulation and Fabrication of Micro/Nanomaterials

Optoelectrokinetics (OEK), a fusion of optics, electrokinetics, and microfluidics, has been demonstrated to offer a series of extraordinary advantages in the manipulation and fabrication of micro/nanomaterials, such as requiring no mask, programmability, flexibility, and rapidness. In this paper, we summarize a variety of differently structured OEK chips, followed by a discussion on how they are fabricated and the ways in which they work. We also review how three differently sized polystyrene beads can be separated simultaneously, how a variety of nanoparticles can be assembled, and how micro/nanomaterials can be fabricated into functional devices. Another focus of our paper is on mask-free fabrication and assembly of hydrogel-based micro/nanostructures and its possible applications in biological fields. We provide a summary of the current challenges facing the OEK technique and its future prospects at the end of this paper.

Chemo-treated 4T1 breast cancer cells radiation response measured by single and multiple cell ionization using infrared laser trap

We present a study that uses a laser trapping technique for measurement of radiation sensitivity of untreated and chemo-treated cancer cells. We used a human mammary tumor cell line (4T1) treated by an antitumor compound, 2-Dodecyl-6-methoxycyclohexa-2, 5-diene-1,4-dione (DMDD), which was extracted from the root of Averrhoa carambola L. The untreated control group, and both 2-hour and 24-hour treated groups of 4T1 cells were used in this study. The absorbed threshold ionization energy (TIE) and the threshold radiation dose (TRD) were determined using a high-power infrared laser (at 1064 nm) trap by single and multiple cells trapping and ionization. The results were analyzed using descriptive and t-statistics. The relation of the TIE and TRD to the mass of the individual cells were also analyzed for different hours of treatment in comparison with the control group. Both TIE and TRD decrease with increasing treatment periods. However, the TRD decreases with mass regardless of the treatment. Analyses of the TRD for single vs multiple cells ionizations within each group have also consistently showed this same behavior regardless of the treatment. The underlying factors for these observed relations are explained in terms of radiation, hyperthermia, and chemo effects.

Optoelectrokinetics-based microfluidic platform for bioapplications: A review of recent advances

The introduction of optoelectrokinetics (OEK) into lab-on-a-chip systems has facilitated a new cutting-edge technique-the OEK-based micro/nanoscale manipulation, separation, and assembly processes-for the microfluidics community. This technique offers a variety of extraordinary advantages such as programmability, flexibility, high biocompatibility, low-cost mass production, ultralow optical power requirement, reconfigurability, rapidness, and ease of integration with other microfluidic units. This paper reviews the physical mechanisms that govern the manipulation of micro/nano-objects in microfluidic environments as well as applications related to OEK-based micro/nanoscale manipulation-applications that span from single-cell manipulation to single-molecular behavior determination. This paper wraps up with a discussion of the current challenges and future prospects for the OEK-based microfluidics technique. The conclusion is that this technique will allow more opportunities for biomedical and bioengineering researchers to improve lab-on-a-chip technologies and will have far-reaching implications for biorelated researches and applications in the future.

Label-free density-based detection of adipocytes of bone marrow origin using magnetic levitation

The first report on application of magnetic levitation technology for detection of adipogenic cells based on single cell density measurement.

A microfluidic chip-based co-culture of fibroblast-like synoviocytes with osteoblasts and osteoclasts to test bone erosion and drug evaluation

Targeting fibroblast-like synoviocyte (FLS) migration and invasion-mediated bone erosion is a promising clinical strategy for the treatment of rheumatoid arthritis (RA). Drug sensitivity testing is fundamental to this scheme. We designed a microfluidic chip-based, cell co-cultured platform to mimic RA FLS-mediated bone erosion and perform drug-sensitive assay. Human synovium SW982 cells were cultured in the central channel and migrated to flow through matrigel-coated side channels towards cell culture chamber where RANKL-stimulated osteoclastic RAW264.7 and osteogenic medium (OS)-stimulated bone marrow mesenchymal stem cells (BMSC) were cultured in the microfluidic chip device, mimicking FLS migration and invasion-mediated bone erosion in RA. These SW982 cells showed different migration potentials to osteoclasts and BMSC. The migration of SW982 cells with high expression of cadherin-11 was more potent when SW982 cells were connected with the co-culture of RAW264.7 and BMSC. Simultaneously, in the co-cultured chamber, tartrate-resistant acid phosphatase (TRAP) activity of RANKL-stimulated RAW264.7 cells was enhanced, but alkaline phosphatase (ALP) activity was decreased in comparison with mono-cultured chamber. Furthermore, it was confirmed that celastrol, a positive drug for the treatment of RA, inhibited SW982 cell migration as well as TRAP activity in the cell-cultured microfluidic chips. Thus, the migration and invasion to bone-related cells was reconstituted on the microfluidic model. It may provide an effective anti-RA drug screen model for targeting FLS migration-mediated bone erosion.

Analysis of the dielectrophoretic properties of cells using the isomotive AC electric field

Various microfluidic devices utilizing the principle of dielectrophoresis (DEP) have been developed to separate, concentrate, and characterize biological cells; however, their performance is still limited by a lack of quantitative characterization. We addressed this limitation by employing a method capable of accurately quantifying a cell's response to an imposed field gradient. In this study, a simple method using a newly designed Creek-gap electrode was proposed, and the electrokinetic behavior of cells was characterized by DEP velocimetry under the exposure of an approximately constant gradient of electric field square established along the gap of the electrodes. Together with the numerical prediction of the electric field based on three-dimensional electric field analysis, the magnitude of DEP forces and the real part of the Clausius-Mossotti factor of cells were deduced from their movement. Results demonstrated that the proposed method was applicable to the determination of the dielectrophoretic properties of cells.

Determination of Cell Membrane Capacitance and Conductance via Optically Induced Electrokinetics

Cell membrane capacitance and conductance are key pieces of intrinsic information correlated with the cellular dielectric parameters and morphology of the plasma membrane; these parameters have been used as electrophysiological biomarkers to characterize cellular phenotype and state, and they have many associated clinical applications. Here, we present our work on the non-invasive determination of cell membrane capacitance and conductance by an optically activated microfluidics chip. The model for determining the cell membrane capacitance and conductance was established by a single layer of the shell-core polarization model. Three-dimensional finite-element analyses of the positive and negative optically induced dielectrophoresis forces generated by the projected light arrays of spots were performed, thus providing a theoretical validation of the feasibility of this approach. Then, the crossover frequency spectra for four typical types of cells (Raji cells, MCF-7 cells, HEK293 cells, and K562 cells) were experimentally investigated by using a micro-vision based motion-tracking technique. The different responses of these cells to the positive and negative ODEP forces were studied under four different liquid conductivities by automatic observation and tracking of the cellular trajectory and texture during the cells' translation. The cell membrane capacitance and conductance were determined from the curve-fitted spectra, which were 11.1 ± 0.9 mF/m² and 782 ± 32 S/m², respectively, for Raji cells, 11.5 ± 0.8 mF/m² and 114 ± 28 S/m² for MCF-7 cells, 9.0 ± 0.9 mF/m² and 187 ± 22 S/m² for HEK293 cells, and 10.2 ± 0.7 mF/m² and 879 ± 24 S/m² for K562 cells. Furthermore, as an application of this technique, the membrane capacitances of MCF-7 cells treated with four different concentrations of drugs were acquired. This technique introduces a determination of cell membrane capacitance and conductance that yields statistically significant data while allowing information from individual cells to be obtained in a non-invasive manner.

Detection and quantification of subtle changes in red blood cell density using a cell phone

Magnetic levitation has emerged as a technique that offers the ability to differentiate between cells with different densities. We have developed a magnetic levitation system for this purpose that distinguishes not only different cell types but also density differences in cells of the same type. This small-scale system suspends cells in a paramagnetic medium in a capillary placed between two rare earth magnets, and cells levitate to an equilibrium position determined solely by their density. Uniform reference beads of known density are used in conjunction with the cells as a means to quantify their levitation positions. In one implementation images of the levitating cells are acquired with a microscope, but here we also introduce a cell phone-based device that integrates the magnets, capillary, and a lens into a compact and portable unit that acquires images with the phone's camera. To demonstrate the effectiveness of magnetic levitation in cell density analysis we carried out levitation experiments using red blood cells with artificially altered densities, and also levitated those from donors. We observed that we can distinguish red blood cells of an anemic donor from those that are healthy. Since a plethora of disease states are characterized by changes in cell density magnetic cell levitation promises to be an effective tool in identifying and analyzing pathologic states. Furthermore, the low cost, portability, and ease of use of the cell phone-based system may potentially lead to its deployment in low-resource environments.