Silicon detectors for monitoring neutron beams in n-TOF beamlines

The Gamma and Neutron Sensor System for Rapid Dose Rate Mapping in the CLEANDEM Project

The decommissioning of nuclear installations, as well as the possible necessary accident remediations, requires the physical presence of human operators in potentially radiologically hostile environments. The number of active nuclear reactors worldwide is greater than 400, and most of them are 40 to 50 years old, thus implying that soon they will have to be dismantled. In the framework of the H2020 CLEANDEM project, a small robotic vehicle is being developed that is equipped with a series of different sensors for areas that are significantly contaminated by radiation. In this work, we describe the MiniRadMeter system, a compact low-cost sensor capable of being used to perform quick gamma and neutron radiation field mapping of environments prior to the possible start of human operations. The miniature gamma sensor is a 1 cm³ scintillator counter with moderate spectroscopic features read out by means of a 6 × 6 mm² SiPM, whereas neutrons are detected by means of a silicon diode coupled to a layer of ⁶LiF and placed inside a 6 × 6 × 6 cm³ polyethylene box. The front-end and data acquisition electronics were developed based on a Raspberry Pi4 microcomputer. In this paper, the system performance and the preliminary test results are described.

A novel experimental approach to characterize neutron fields at high- and low-energy particle accelerators

The characterization of particle accelerator induced neutron fields is challenging but fundamental for research and industrial activities, including radiation protection, neutron metrology, developments of neutron detectors for nuclear and high-energy physics, decommissioning of nuclear facilities, and studies of neutron damage on materials and electronic components. This work reports on the study of a novel approach to the experimental characterization of neutron spectra at two complex accelerator environments, namely the CERF, a high-energy mixed reference field at CERN in Geneva, and the Bern medical cyclotron laboratory, a facility used for multi-disciplinary research activities, and for commercial radioisotope production for nuclear medicine. Measurements were performed through an innovative active neutron spectrometer called DIAMON, a device developed to provide in real time neutron energy spectra without the need of guess distributions. The intercomparison of DIAMON measurements with reference data, Monte Carlo simulations, and with the well-established neutron monitor Berthold LB 6411, has been found to be highly satisfactory in all conditions. It was demonstrated that DIAMON is an almost unique device able to characterize neutron fields induced by hadrons at 120 GeV/c as well as by protons at 18 MeV colliding with different materials. The accurate measurement of neutron spectra at medical cyclotrons during routine radionuclide production for nuclear medicine applications is of paramount importance for the facility decommissioning. The findings of this work are the basis for establishing a methodology for producing controlled proton-induced neutron beams with medical cyclotrons.

SiLiF Neutron Counters to Monitor Nuclear Materials in the MICADO Project

In the framework of the MICADO (Measurement and Instrumentation for Cleaning And Decommissioning Operations) European Union (EU) project, aimed at the full digitization of low- and intermediate-level radioactive waste management, a set of 32 solid state thermal neutron detectors named SiLiF has been built and characterized. MICADO encompasses a complete active and passive characterization of the radwaste drums with neutrons and gamma rays, followed by a longer-term monitoring phase. The SiLiF detectors are suitable for the monitoring of nuclear materials and can be used around radioactive waste drums possibly containing small quantities of actinides, as well as around spent fuel casks in interim storage or during transportation. Suitable polyethylene moderators can be exploited to better shape the detector response to the expected neutron spectrum, according to Monte Carlo simulations that were performed. These detectors were extensively tested with an AmBe neutron source, and the results show a quite uniform and reproducible behavior.

Neutron detection devices with 6LiF converter layers

The demand for new thermal neutron detectors as an alternative to 3He tubes in research, industrial, safety and homeland security applications, is growing. These needs have triggered research and development activities about new generations of thermal neutron detectors, characterized by reasonable efficiency and gamma rejection comparable to 3He tubes. In this paper we show the state of art of a promising lowcost technique, based on commercial solid state silicon detectors coupled with thin neutron converter layers of 6LiF deposited onto carbon fiber substrates. Several configurations were studied with the GEANT4 simulation code, and then calibrated at the PTB Thermal Neutron Calibration Facility. The results show that the measured detection efficiency is well reproduced by the simulations, therefore validating the simulation tool in view of new designs. These neutron detectors have also been tested at neutron beam facilities like ISIS (Rutherford Appleton Laboratory, UK) and n_TOF (CERN) where a few samples are already in operation for beam flux and 2D profile measurements. Forthcoming applications are foreseen for the online monitoring of spent nuclear fuel casks in interim storage sites.