Mapping the process dependent conductivity of carbon nanotube thin-films using a non-invasive contact probing system

Nonthermal and selective crystal bridging of ZnO grains by irradiation with electron beam as nonequilibrium reaction field

Ceramic particles, such as titanium oxide and indium tin oxide, are expected to be used as electric or catalytic materials for various applications. In this work, we progressed to employ the irradiation with an electron beam as the nonequilibrium reaction field for ceramic composition, and we successfully obtained the basic technology for a ceramic thin-film fabrication using a field emission (FE) electron beam with low energy resolution having a half width under 100 meV that had a homogeneous planar electron emission as the nonequilibrium reaction field. In particular, ZnO particles synthesized by electron beam irradiation show selective crystal bridging along the c-axis during FE electron beam irradiation, which is important for synthesizing poly-ZnO crystals without a heating process, because the energy fluctuations of FE electron beams are small and affect the directionality of ZnO crystal growth along the c-axis. This accomplishment may make a significant contribution to the analysis of the formation mechanism of ZnO particles with a uniform morphology and crystal structure by the FE electron beam during the crystallization. Moreover, we will be able to provide basic elements for next-generation nanodevices with highly functional properties by controlling each terminal crystal interface of metals, ceramics, and semiconductors with this technique.

Buckled carbon nanotube network thin-film fabricated using chemically swelled elastomer substrates

We report on the fabrication of buckled carbon nanotube thin-film networks (CNTN) that increases in conductivity with applied tactile pressure. When tactile pressure was applied, the buckled nanotubes collapsed and increased in interconnected density and as a result increased the thin-film conductivity. Unlike conventional methods using mechanically expanded elastomers, we utilize chemically swollen elastomers as the expanded substrate to transfer the CNTN. As the chemical evaporates, it compresses the CNTN causing the thin-film to buckle. The CNTN compression can be controlled by using organic solvents with differing elastomer absorption rates. Our method requires no mechanical instruments and shows in-plane multi-axial uniform strain for the entire substrate surface. Since the buckling was controlled chemically, the buckled CNTN can be produced reliably, furthering the possibility of its application as the active sensing material for highly sensitive tactile pressure sensors.