Stochastic resonance during a polymer translocation process

Optimizing Work Extraction in the Presence of an Entropic Potential: An Entropic Stochastic Resonance

We study the nontrivial thermodynamic responses of an overdamped Brownian system driven by an unbiased driving force when the particle is confined inside a bilobal irregular structure. The spatial irregularity of the confinement results in an effective entropic bistable potential along the direction of transport. We calculate the thermodynamic response functions in terms of the averaged work done and the absorbed heat over a cycle of driving. We find that the thermodynamic responses are influenced by the nonlinearity of the effective entropic potential, the frequency of the external periodic driving force, and the random thermal fluctuations in a nontrivial way. In the presence of an optimal amount of thermal noise and a favoring driving frequency, the process exhibits a resonance-like precedent in terms of both output work and absorbed heat. We explore the conditions to get best synchronized work extraction (or absorbed heat), which can be utilized as a potential quantifier of an entropic stochastic resonance phenomenon. Finally, we identify a hallmark of entropy dominance over an analogous energy-driven scenario in terms of output work.

Polymer translocation: effects of periodically driven confinement

We study the influence of confinement on the dynamics of translocation of a linear polymer chain in a good solvent through a cone-shaped pore. Using the Langevin dynamics simulations, we calculate both the first attempt time and translocation time as a function of the position of the back wall and apex angle α. As the in vivo confining environment is inherently dynamic, we extended the present study to explore the consequences of a periodically driven back wall and apex angles on the translocation dynamics. Our findings reveal that the translocation time initially decreases as the driving frequency increases, but increases after a certain frequency. The frequency at which the translocation time is found to be minimum is referred to as the resonance activation. Analyzing the distribution of translocation times around this frequency renders interesting information about the translocation process. We further explore the translocation dynamics by calculating the residence time of individual monomers, shedding light on the microscopic aspects of the process.

Gain reversal in the translocation dynamics of a semiflexible polymer through a flickering pore

We study the driven translocation of a semiflexible polymer through an attractive extended pore with a periodically oscillating width. Similar to its flexible counterpart, a stiff polymer translocates through an oscillating pore more quickly than a static pore whose width is equal to the oscillating pore's mean width. This efficiency quantified as a gain in the translocation time, highlights a considerable dependence of the translocation dynamics on the stiffness of the polymer and the attractive nature of the pore. The gain characteristics for various polymer stiffness exhibit a trend reversal when the stickiness of the pore is changed. The gain reduces with increasing stiffness for a lower attractive strength of the pore, whereas it increases with increasing stiffness for higher attractive strengths. Such a dependence leads to the possibility of a high degree of robust selectivity in the translocation process.

Geometric Brownian information engine: Essentials for the best performance

We investigate a geometric Brownian information engine (GBIE) in the presence of an error-free feedback controller that transforms the information gathered on the state of Brownian particles entrapped in monolobal geometric confinement into extractable work. Outcomes of the information engine depend on the reference measurement distance x_{m}, the feedback site x_{f}, and the transverse force G. We determine the benchmarks for utilizing the available information in an output work and the optimum operating requisites for best achievable work. Transverse bias force (G) tunes the entropic contribution in the effective potential and hence the standard deviation (σ) of the equilibrium marginal probability distribution. We recognize that the amount of extractable work reaches a global maximum when x_{f}=2x_{m} with x_{m}∼0.6σ, irrespective of the extent of the entropic limitation. Because of the higher loss of information during the relaxation process, the best achievable work of a GBIE is lower in an entropic system. The feedback regulation also bears the unidirectional passage of particles. The average displacement increases with growing entropic control and is maximum when x_{m}∼0.81σ. Finally, we explore the efficacy of the information engine, a quantity that regulates the efficiency in utilizing the information acquired. With x_{f}=2x_{m}, the maximum efficacy reduces with increasing entropic control and shows a crossover from 2 to 11/9. We discover that the condition for the best efficacy depends only on the confinement lengthscale along the feedback direction. The broader marginal probability distribution accredits the increased average displacement in a cycle and the lower efficacy in an entropy-dominated system.

Ratcheting Charged Polymers through Symmetric Nanopores Using Pulsed Fields: Designing a Low Pass Filter for Concentrating Polyelectrolytes

We present a new concept for the separation of DNA molecules by contour length that combines a nanofluidic ratchet, nanopore translocation, and pulsed fields. Using Langevin dynamics simulations, we show that it is possible to design pulsed field sequences to ratchet captured semiflexible molecules in such a way that only short chains successfully translocate, effectively transforming the nanopore process into a low pass molecular filter. We also show that asymmetric pulses can significantly enhance the device efficiency. The process itself can be performed with many pores in parallel, and it should be possible to integrate it directly into nanopore sequencing devices, increasing its potential utility.

Rectification of polymer translocation through nanopores by nonchiral and chiral active particles

We study translocation of a flexible polymer chain through a membrane pore under the influence of active forces and steric exclusion using Langevin dynamics simulations within a minimal two-dimensional model. The active forces on the polymer are imparted by nonchiral and chiral active particles that are introduced on one side or both sides of a rigid membrane positioned across the midline of a confining box. We show that the polymer can translocate through the pore to either side of the dividing membrane in the absence of external forcing. Translocation of the polymer to a given side of the membrane is driven (hindered) by an effective pulling (pushing) exerted by the active particles that are present on that side. The effective pulling results from accumulation of active particles around the polymer. This crowding effect signifies persistent motion of active particles causing prolonged detention times for them close to the confining walls and the polymer. The effective pushing that hinders the translocation, on the other hand, results from steric collisions that occur between the polymer and active particles. As a result of the competition between these effective forces, we find a transition between two rectified cis-to-trans and trans-to-cis translocation regimes. This transition is identified by a sharp peak in the average translocation time. The effects of active particles on the transition is studied by analyzing how the translocation peak is regulated by the activity (self-propulsion) strength of these particles, their area fraction, and chirality strength.

First passage of a diffusing particle under stochastic resetting in bounded domains with spherical symmetry

We investigate the first passage properties of a Brownian particle diffusing freely inside a d-dimensional sphere with absorbing spherical surface subject to stochastic resetting. We derive the mean time to absorption (MTA) as functions of resetting rate γ and initial distance r of the particle to the center of the sphere. We find that when r>r_{c} there exists a nonzero optimal resetting rate γ_{opt} at which the MTA is a minimum, where r_{c}=sqrt[d/(d+4)]R and R is the radius of the sphere. As r increases, γ_{opt} exhibits a continuous transition from zero to nonzero at r=r_{c}. Furthermore, we consider that the particle lies between two two-dimensional or three-dimensional concentric spheres with absorbing boundaries, and obtain the domain in which resetting expedites the MTA, which is (R_{1},r_{c_{1}})∪(r_{c_{2}},R_{2}), with R_{1} and R_{2} being the radii of inner and outer spheres, respectively. Interestingly, when R_{1}/R_{2} is less than a critical value, γ_{opt} exhibits a discontinuous transition at r=r_{c_{1}}; otherwise, such a transition is continuous. However, at r=r_{c_{2}} the transition is always continuous.

Geometric Brownian information engine: Upper bound of the achievable work under feedback control

We design a geometric Brownian information engine by considering overdamped Brownian particles inside a two-dimensional monolobal confinement with irregular width along the transport direction. Under such detention, particles experience an effective entropic potential which has a logarithmic form. We employ a feedback control protocol as an outcome of error-free position measurement. The protocol comprises three stages: measurement, feedback, and relaxation. We reposition the center of the confinement to the measurement distance (x_p) instantaneously when the position of the trapped particle crosses x_p for the first time. Then, the particle is allowed for thermal relaxation. We calculate the extractable work, total information, and unavailable information associated with the feedback control using this equilibrium probability distribution function. We find the exact analytical value of the upper bound of extractable work as (53-2ln2)k_BT. We introduce a constant force G downward to the transverse coordinate (y). A change in G alters the effective potential of the system and tunes the relative dominance of entropic and energetic contributions in it. The upper bound of the achievable work shows a crossover from (53-2ln2)k_BT to 12k_BT when the system changes from an entropy-dominated regime to an energy-dominated one. Compared to an energetic analog, the loss of information during the relaxation process is higher in the entropy-dominated region, which accredits the less value in achievable work. Theoretical predictions are in good agreement with the Langevin dynamics simulation studies.

Antiresonant driven systems for particle manipulation

We report on the onset of antiresonant behavior of mass transport systems driven by time-dependent forces. Antiresonances arise from the coupling of a sufficiently high number of space-time modes of the force. The presence of forces having a wide space-time spectrum, a necessary condition for the formation of an antiresonance, is typical of confined systems with uneven and deformable walls that induce entropic forces dependent on space and time. We have analyzed, in particular, the case of polymer chains confined in a flexible channel and shown how they can be sorted and trapped. The presence of resonance-antiresonance pairs found can be exploited to design protocols able to engineer optimal transport processes and to manipulate the dynamics of nano-objects.

Entropic stochastic resonance induced by a transverse driving force

The phenomenon of entropic stochastic resonance (ESR) is investigated with the presence of a time-periodic force in the transverse direction. Simulation results manifest that the ESR can survive even if there is no static bias force in any direction, just if a transverse driving field is applied. In the weak noise region, the transverse driving force leads to a giant-suppression of the escape rate from one well to another, i.e. the entropic trapping. The increase in noise intensity will eliminate this suppression and induce the ESR phenomenon. An alternative quantity, called the mean free flying time, is also proposed to characterize the ESR as well as the conventional spectral power amplification. The ESR can be modulated conveniently by the transverse periodic force, which implies an alternative method for controlling the dynamics of small-scale systems. This article is part of the theme issue 'Vibrational and stochastic resonance in driven nonlinear systems (part 2)'.

Entropic vibrational resonance

We demonstrate the existence of vibrational resonance associated with the presence of an uneven boundary. When the motion of a Brownian particle is confined in a region with an uneven boundary, constrained to a double cavity, a high-frequency signal may produce a peak in the spectral power amplification of the other low-frequency signal and therefore to the appearance of the vibrational resonance phenomenon. The mechanism of vibrational resonance in constrained boundaries is different from that in energetic potentials and is termed entropic vibrational resonance (EVR). The EVR can be observed even if the bias force is absent in any direction. Through careful analysis, we clarify two types of mechanisms of the EVR. The one mechanism is ascribed to the transition from a bistable system to a monostable system, and the other corresponds to the match between the escape rate and the natural frequency of the low-frequency signal. Our work merges the vibrational resonance with an uneven boundary, thus extending the scope of the vibrational resonance and shedding new light on the concept of resonance.

Reducing the variance in the translocation times by prestretching the polymer

Langevin dynamics simulations of polymer translocation are performed where the polymer is stretched via two opposing forces applied on the first and last monomer before and during translocation. In this setup, polymer translocation is achieved by imposing a bias between the two pulling forces such that there is net displacement towards the trans side. Under the influence of stretching forces, the elongated polymer ensemble contains less variations in conformations compared to an unstretched ensemble. Simulations demonstrate that this reduced spread in initial conformations yields a reduced variation in translocation times relative to the mean translocation time. This effect is explored for different ratios of the amplitude of thermal fluctuations to driving forces to control for the relative influence of the thermal path sampled by the polymer. Since the variance in translocation times is due to contributions coming from sampling both thermal noise and initial conformations, our simulations offer independent control over the two main sources of noise and allow us to shed light on how they both contribute to translocation dynamics. Simulation parameter space corresponding to experimentally relevant conditions is highlighted and shown to correspond to a significant decrease in the spread of translocation times, thus indicating that stretching DNA prior to translocation could assist nanopore-based sequencing and sizing applications.

Frequency-control of protein translocation across an oscillating nanopore

The translocation of a lipid binding protein (LBP) is studied using a phenomenological coarse-grained computational model that simplifies both chain and pore geometry.