On the benefits of localized modes in anharmonic vibrational calculations for small molecules

The Near-Sightedness of Many-Body Interactions in Anharmonic Vibrational Couplings

Couplings between vibrational motions are driven by electronic interactions, and these couplings carry special significance in vibrational energy transfer, multidimensional spectroscopy experiments, and simulations of vibrational spectra. In this investigation, the many-body contributions to these couplings are analyzed computationally in the context of clathrate-like alkali metal cation hydrates, including Cs+(H2O)20, Rb+(H2O)20, and K+(H2O)20, using both analytic and quantum-chemistry potential energy surfaces. Although the harmonic spectra and one-dimensional anharmonic spectra depend strongly on these many-body interactions, the mode-pair couplings were, perhaps surprisingly, found to be dominated by one-body effects, even in cases of couplings to low-frequency modes that involved the motion of multiple water molecules. The origin of this effect was traced mainly to geometric distortion within water monomers and cancellation of many-body effects in differential couplings, and the effect was also shown to be agnostic to the identity of the ion. These outcomes provide new understanding of vibrational couplings and suggest the possibility of improved computational methods for the simulation of infrared and Raman spectra.

Pitfalls in the n-mode representation of vibrational potentials

Simulations of anharmonic vibrational motion rely on computationally expedient representations of the governing potential energy surface. The n-mode representation (n-MR)-effectively a many-body expansion in the space of molecular vibrations-is a general and efficient approach that is often used for this purpose in vibrational self-consistent field (VSCF) calculations and correlated analogues thereof. In the present analysis, a lack of convergence in many VSCF calculations is shown to originate from negative and unbound potentials at truncated orders of the n-MR expansion. For cases of strong anharmonic coupling between modes, the n-MR can both dip below the true global minimum of the potential surface and lead to effective single-mode potentials in VSCF that do not correspond to bound vibrational problems, even for bound total potentials. The present analysis serves mainly as a pathology report of this issue. Furthermore, this insight into the origin of VSCF non-convergence provides a simple, albeit ad hoc, route to correct the problem by "painting in" the full representation of groups of modes that exhibit these negative potentials at little additional computational cost. Somewhat surprisingly, this approach also reasonably approximates the results of the next-higher n-MR order and identifies groups of modes with particularly strong coupling. The method is shown to identify and correct problematic triples of modes-and restore SCF convergence-in two-mode representations of challenging test systems, including the water dimer and trimer, as well as protonated tropine.

Structural Dependence of Extended Amide III Vibrations in Two-Dimensional Infrared Spectra

Two-dimensional infrared (2D-IR) spectroscopy is a powerful experimental method for probing the structure and dynamics of proteins in aqueous solution. So far, most experimental studies have focused on the amide I vibrations, for which empirical vibrational exciton models provide a means of interpreting such experiments. However, such models are largely lacking for other regions of the vibrational spectrum. To close this gap, we employ an efficient quantum-chemical methodology for the calculation of 2D-IR spectra, which is based on anharmonic theoretical vibrational spectroscopy with localized modes. We apply this approach to explore the potential of 2D-IR spectroscopy in the extended amide III region. Using calculations for a dipeptide model as well as alanine polypeptides, we show that distinct 2D-IR cross-peaks in the extended amide III region can potentially be used to distinguish α-helix and β-strand structures. We propose that the extended amide III region could be a promising target for future 2D-IR experiments.

Accelerating Anharmonic Spectroscopy Simulations via Local-Mode, Multilevel Methods

Ab initio computer simulations of anharmonic vibrational spectra provide nuanced insight into the vibrational behavior of molecules and complexes. The computational bottleneck in such simulations, particularly for ab initio potentials, is often the generation of mode-coupling potentials. Focusing specifically on two-mode couplings in this analysis, the combination of a local-mode representation and multilevel methods is demonstrated to be particularly symbiotic. In this approach, a low-level quantum chemistry method is employed to predict the pairwise couplings that should be included at the target level of theory in vibrational self-consistent field (and similar) calculations. Pairs that are excluded by this approach are "recycled" at the low level of theory. Furthermore, because this low-level pre-screening will eventually become the computational bottleneck for sufficiently large chemical systems, distance-based truncation is applied to these low-level predictions without substantive loss of accuracy. This combination is demonstrated to yield sub-wavenumber fidelity with reference vibrational transitions when including only a small fraction of target-level couplings; the overhead of predicting these couplings, particularly when employing distance-based, local-mode cutoffs, is a trivial added cost. This combined approach is assessed on a series of test cases, including ethylene, hexatriene, and the alanine dipeptide. Vibrational self-consistent field (VSCF) spectra were obtained with an RI-MP2/cc-pVTZ potential for the dipeptide, at approximately a 5-fold reduction in computational cost. Considerable optimism for increased accelerations for larger systems and higher-order couplings is also justified, based on this investigation.

Quantum-chemical calculation of two-dimensional infrared spectra using localized-mode VSCF/VCI

Computational protocols for the simulation of two-dimensional infrared (2D IR) spectroscopy usually rely on vibrational exciton models which require an empirical parameterization. Here, we present an efficient quantum-chemical protocol for predicting static 2D IR spectra that does not require any empirical parameters. For the calculation of anharmonic vibrational energy levels and transition dipole moments, we employ the localized-mode vibrational self-consistent field (L-VSCF)/vibrational configuration interaction (L-VCI) approach previously established for (linear) anharmonic theoretical vibrational spectroscopy [P. T. Panek and C. R. Jacob, ChemPhysChem 15, 3365-3377 (2014)]. We demonstrate that with an efficient expansion of the potential energy surface using anharmonic one-mode potentials and harmonic two-mode potentials, 2D IR spectra of metal carbonyl complexes and dipeptides can be predicted reliably. We further show how the close connection between L-VCI and vibrational exciton models can be exploited to extract the parameters of such models from those calculations. This provides a novel route to the fully quantum-chemical parameterization of vibrational exciton models for predicting 2D IR spectra.

On the vibrations of formic acid predicted from first principles

In this article, we review recent first principles, anharmonic studies on the molecular vibrations of gaseous formic acid in its monomer form. Transitions identified as fundamentals for both cis- and trans form reported in these studies are collected and supported by results from high-resolution experiments. Attention is given to the effect of coordinate coupling on the convergence of the computed vibrational states.

Calculation of absolute Raman scattering cross-sections using vibrational self-consistent field/vibrational configuration interaction wave functions

In the present study, the differential scattering cross-sections, depolarization ratios and Raman shifts of small molecular systems are obtained from configuration iteration wave functions of vibrational self-consistent field (VSCF) states. The transition polarizabilities were modeled using the Placzek approximation, neglecting those contributions not arising from the electric dipole mechanism. This theoretical approach is considered a good approximation for samples that absorb in the UV range if the excitation radiation falls in the visible region, as is the case of the molecules selected for the present study, namely: water, methane, and acetylene. Potential energy and electronic polarizability surfaces are calculated by the CCSD(T) and CC3 methods with aug-cc-p(C)V(T,Q,5)Z basis sets. The vibrational Hamiltonian includes the vibrational angular momentum contribution of the Watson kinetic energy operator. As expected, due to the variational nature of the VSCF and vibrational configuration interaction (VCI) methods, the Raman transition wavenumbers are substantially improved over the harmonic predictions. Surprisingly, the scattering cross-sections obtained using the harmonic approximation or the VSCF method better agrees with the experimental values than those cross-sections predicted using VCI wave functions. The more significant deviations of the VCI results from the experimental reference may be related to the significant uncertainties of the measured cross-sections. Still, it may also indicate that the VCI Raman transition moments may require a more accurate description of the electronic polarizability surface. Finally, the depolarization ratios calculated for H₂ O and C₂ D₂ using harmonic and VCI wave functions have similar accuracy, whereas, for C₂ H₂ and C₂ HD, the VCI results are more accurate.

Computational analyses of the vibrational spectra of fentanyl, carfentanil and remifentanil

The infrared (IR) spectra of fentanyl, carfentanil and remifentanil, and protonated salts, are computed using quantum chemistry methods. New experimental FTIR spectra are also reported and compared to the calculations. The accuracy of two density functional theory methods, B3LYP and M06-2X, are tested against higher level theories (MP2) and the experimental data. Gas phase IR spectra are calculated for both the neutral and protonated molecules in order to compare with the experimental data measured for various salts of fentanyl and its analogues. Key vibrational modes are selected and studied in detail using a vibrational mode locality calculation. The main contributing atomic movements in these vibrational modes are identified.

Advances in vibrational configuration interaction theory - part 1: Efficient calculation of vibrational angular momentum terms

Finite basis vibrational configuration interaction theory (VCI) is a highly accurate method for the variational calculation of state energies and related properties, but suffers from fast growing computational costs in dependence of the size of the correlation space. In this series of papers, concepts and techniques will be presented, which diminish the computational demands and thus broaden the applicability of this method to larger molecules or more complex situations. This first part focuses on a highly efficient implementation of the vibrational angular momentum (VAM) terms as occurring in the Watson Hamiltonian and the prediagonalization of initial subspaces within an iterative configuration selective VCI implementation. Working equations and benchmark calculations are provided, the latter demonstrating the increased performance of the new algorithm.

Anharmonic Vibrational Calculations Based on Group-Localized Coordinates: Applications to Internal Water Molecules in Bacteriorhodopsin

An efficient anharmonic vibrational method is developed exploiting the locality of molecular vibration. Vibrational coordinates localized to a group of atoms are employed to divide the potential energy surface (PES) of a system into intra- and inter-group contributions. Then, the vibrational Schrödinger equation is solved based on a PES, in which the inter-group coupling is truncated at the harmonic level while accounting for the intra-group anharmonicity. The method is applied to a pentagonal hydrogen bond network (HBN) composed of internal water molecules and charged residues in a membrane protein, bacteriorhodopsin. The PES is calculated by the quantum mechanics/molecular mechanics (QM/MM) calculation at the level of B3LYP-D3/aug-cc-pVDZ. The infrared (IR) spectrum is computed using a set of coordinates localized to each water molecule and amino acid residue by second-order vibrational quasi-degenerate perturbation theory (VQDPT2). Benchmark calculations show that the proposed method yields the N-D/O-D stretching frequencies with an error of 7 cm-1 at the cost reduced by more than five times. In contrast, the harmonic approximation results in a severe error of 150 cm-1. Furthermore, the size of QM regions is carefully assessed to find that the QM regions should include not only the pentagonal HBN itself but also its HB partners. VQDPT2 calculations starting from transient structures obtained by molecular dynamics simulations have shown that the structural sampling has a significant impact on the calculated IR spectrum. The incorporation of anharmonicity, sufficiently large QM regions, and structural samplings are of essential importance to reproduce the experimental IR spectrum. The computational spectrum paves the way for decoding the IR signal of strong HBNs and helps elucidate their functional roles in biomolecules.

Vibrational Spectroscopic Map, Vibrational Spectroscopy, and Intermolecular Interaction

Vibrational spectroscopy is an essential tool in chemical analyses, biological assays, and studies of functional materials. Over the past decade, various coherent nonlinear vibrational spectroscopic techniques have been developed and enabled researchers to study time-correlations of the fluctuating frequencies that are directly related to solute-solvent dynamics, dynamical changes in molecular conformations and local electrostatic environments, chemical and biochemical reactions, protein structural dynamics and functions, characteristic processes of functional materials, and so on. In order to gain incisive and quantitative information on the local electrostatic environment, molecular conformation, protein structure and interprotein contacts, ligand binding kinetics, and electric and optical properties of functional materials, a variety of vibrational probes have been developed and site-specifically incorporated into molecular, biological, and material systems for time-resolved vibrational spectroscopic investigation. However, still, an all-encompassing theory that describes the vibrational solvatochromism, electrochromism, and dynamic fluctuation of vibrational frequencies has not been completely established mainly due to the intrinsic complexity of intermolecular interactions in condensed phases. In particular, the amount of data obtained from the linear and nonlinear vibrational spectroscopic experiments has been rapidly increasing, but the lack of a quantitative method to interpret these measurements has been one major obstacle in broadening the applications of these methods. Among various theoretical models, one of the most successful approaches is a semiempirical model generally referred to as the vibrational spectroscopic map that is based on a rigorous theory of intermolecular interactions. Recently, genetic algorithm, neural network, and machine learning approaches have been applied to the development of vibrational solvatochromism theory. In this review, we provide comprehensive descriptions of the theoretical foundation and various examples showing its extraordinary successes in the interpretations of experimental observations. In addition, a brief introduction to a newly created repository Web site (http://frequencymap.org) for vibrational spectroscopic maps is presented. We anticipate that a combination of the vibrational frequency map approach and state-of-the-art multidimensional vibrational spectroscopy will be one of the most fruitful ways to study the structure and dynamics of chemical, biological, and functional molecular systems in the future.

Calculations on the unimolecular decomposition of the nerve agent VX

It is very difficult to perform experiments on the physical parameters for the thermal decomposition of chemical nerve agents such as VX and computations, therefore, are useful. The reaction dynamics of the gas-phase pericyclic hydrogen transfer of the nerve agent VX is studied computationally. The geometries of the stationary structures are calculated at M06-2X/jul-cc-pVTZ level of theory. Single point energy calculations are carried out at the CBS/QB3 level to correct the energy barriers. Canonical reaction rate constants are calculated as a function of temperature. The one-dimensional semiclassical transition state theory is used to analyse the quantum tunneling effects. A reduced-dimensional hindered rotor model is proposed, tested, and applied to calculate the vibrational partition functions. It is found that the ester (O-side) and thioester (S-side) side chains of VX undergo pericyclic H-transfer reactions that result in decomposition of the molecule. The S-side reaction is favoured both kinetically and thermodynamically and dominates the pyrolysis over the temperature range from 600 K to 1000 K. It is predicted that VX completely decomposes in 2 s at temperatures above 750 K.

Towards theoretical spectroscopy with error bars: systematic quantification of the structural sensitivity of calculated spectra

Molecular spectra calculated with quantum-chemical methods are subject to a number of uncertainties (e.g., errors introduced by the computational methodology) that hamper the direct comparison of experiment and computation. Judging these uncertainties is crucial for drawing reliable conclusions from the interplay of experimental and theoretical spectroscopy, but largely relies on subjective judgment. Here, we explore the application of methods from uncertainty quantification to theoretical spectroscopy, with the ultimate goal of providing systematic error bars for calculated spectra. As a first target, we consider distortions of the underlying molecular structure as one important source of uncertainty. We show that by performing a principal component analysis, the most influential collective distortions can be identified, which allows for the construction of surrogate models that are amenable to a statistical analysis of the propagation of uncertainties in the molecular structure to uncertainties in the calculated spectrum. This is applied to the calculation of X-ray emission spectra of iron carbonyl complexes, of the electronic excitation spectrum of a coumarin dye, and of the infrared spectrum of alanine. We show that with our approach it becomes possible to obtain error bars for calculated spectra that account for uncertainties in the molecular structure. This is an important first step towards systematically quantifying other relevant sources of uncertainty in theoretical spectroscopy.

Uncertainty quantification is applied in theoretical spectroscopy to obtain error bars accounting for the structural sensitivity of calculated spectra.

Anharmonicity of Vibrational Modes in Hydrogen Chloride-Water Mixtures

A thorough analysis of molecular vibrations in the binary system hydrogen chloride/water is presented considering a set of small mixed and pure clusters. In addition to the conventional normal-mode analysis based on the diagonalization of the Hessian, anharmonic frequencies were obtained from the perturbative VPT2 and PT2-VSCF method using hybrid density functional theory. For all normal modes, potential energy curves were modeled by displacing the atoms from the minimum geometry along the normal mode vectors. Three model potentials, a harmonic potential, a Morse potential, and a fourth order polynomial, were applied to fit these curves. From these data, it was possible not only to characterize distinct vibrations as mainly harmonic, anharmonic, or involving higher order terms but also to extract force constants, k, and anharmonicity constants, x_e. By investigating all different types of intramolecular vibrations including covalent stretching or bending vibrations and intermolecular vibrations such as librations, we could demonstrate that while vibrational frequencies can be obtained applying scaling factors to harmonic results, useful anharmonicity constants cannot be predicted in such a way and the usage of more elaborate vibrational methods is necessary. For each particular type of molecular vibration, we could however determine a relationship between the wavenumber or wavenumber shift and the anharmonicity constant, which allows us to estimate mode dependent anharmonicity constants for larger clusters in the future.

On the choice of coordinates in anharmonic theoretical vibrational spectroscopy: Harmonic vs. anharmonic coupling in vibrational configuration interaction

By a suitable choice of coordinates, the computational effort required for calculations of anharmonic vibrational spectra can be reduced significantly. By using suitable localized-mode coordinates obtained from an orthogonal transformation of the conventionally used normal-mode coordinates, anharmonic couplings between modes can be significantly reduced. However, such a transformation introduces harmonic couplings between the localized modes. To elucidate the role of these harmonic couplings, we consider the vibrational self-consistent field (VSCF)/vibrational configuration interaction (VCI) calculations for both few-mode model systems and for ethene as a molecular test case. We show that large harmonic couplings can result in significant errors in localized-mode L-VSCF/L-VCI calculations and study the convergence with respect to the size of the VCI excitation space. To further elucidate the errors introduced by harmonic couplings, we discuss the connection between L-VSCF/L-VCI and vibrational exciton models. With the help of our results, we propose an algorithm for the localization of normal modes in suitable subsets that are chosen to strictly limit the errors introduced by the harmonic couplings while still leading to maximally localized modes.

Anharmonic Vibrational Analysis of Biomolecules and Solvated Molecules Using Hybrid QM/MM Computations

Quantum mechanics/molecular mechanics (QM/MM) calculations are applied for anharmonic vibrational analyses of biomolecules and solvated molecules. The QM/MM method is implemented into a molecular dynamics (MD) program, GENESIS, by interfacing with external electronic structure programs. Following the geometry optimization and the harmonic normal-mode analysis based on a partial Hessian, the anharmonic potential energy surface (PES) is generated from QM/MM energies and gradients calculated at grid points. The PES is used for vibrational self-consistent field (VSCF) and post-VSCF calculations to compute the vibrational spectrum. The method is first applied to a phosphate ion in solution. With both the ion and neighboring water molecules taken as a QM region, IR spectra of representative hydration structures are calculated by the second-order vibrational quasi-degenerate perturbation theory (VQDPT2) at the level of B3LYP/cc-pVTZ and TIP3P force field. A weight-average of IR spectra over the structures reproduces the experimental spectrum with a mean absolute deviation of 16 cm^–1. Then, the method is applied to an enzyme, P450 nitric oxide reductase (P450nor), with the NO molecule bound to a ferric (Fe^III) heme. Starting from snapshot structures obtained from MD simulations of P450nor in solution, QM/MM calculations have been carried out at the level of B3LYP-D3/def2-SVP(D). The spin state of Fe^III(NO) is likely a closed-shell singlet state based on a ratio of N–O and Fe–NO stretching frequencies (ν_N–O and ν_Fe–NO) calculated for closed- and open-shell singlet states. The calculated ν_N–O and ν_Fe–NO overestimate the experimental ones by 120 and 75 cm^–1, respectively. The electronic structure and solvation of Fe^III(NO) affect the structure around the heme of P450nor leading to an increase in ν_N–O and ν_Fe–NO.

Quantum approaches to vibrational dynamics and spectroscopy: is ease of interpretation sacrificed as rigor increases?

The subject of this Perspective is quantum approaches, beyond the harmonic approximation, to vibrational dynamics and IR spectroscopy.

Catalysis and tunnelling in the unimolecular decay of Criegee intermediates

Semi-classical Transition State theory can be applied to catalysed atmospheric reactions, but reaction mode anharmonicity must be treated carefully.

Anharmonic vibrational spectra from double incremental potential energy and dipole surfaces

Using incremental approaches, size limitations for property surface generations are pushed significantly, enabling accurate large molecule anharmonic vibrational spectra calculations.

Resolving the Origins of Crystalline Anharmonicity Using Terahertz Time-Domain Spectroscopy and ab Initio Simulations

Anharmonicity has been shown to be an important piece of the fundamental framework that dictates numerous observable phenomena. In particular, anharmonicity is the driving force of vibrational relaxation processes, mechanisms that are integral to the proper function of numerous chemical processes. However, elucidating its origins has proven difficult due to experimental and theoretical challenges, specifically related to separating the anharmonic contributions from other unrelated effects. While no one technique is particularly suited for providing a complete picture of anharmonicity, by combining multiple complementary methods such a characterization can be made. In this study the role of individual atomic interactions on the anharmonic properties of crystalline purine, the building block of many DNA and RNA nucleobases, is studied by experimental terahertz time-domain spectroscopy and first-principles density functional theory (DFT) and ab initio molecular dynamics simulations (AIMD). In particular, the detailed vibrational information provided by the DFT calculations is used to interpret the atomic origins of anharmonic-related effects as determined by the AIMD calculations, which are in good agreement with the experimental data. The results highlight that anharmonicity is especially pronounced in the intermolecular interactions, particularly along the amine hydrogen bond coordinate, and yields valuable insight into what is similarly observed complex biosystems and crystalline solids.

Anharmonic Theoretical Vibrational Spectroscopy of Polypeptides

Because of the size of polypeptides and proteins, the quantum-chemical prediction of their vibrational spectra presents an exceptionally challenging task. Here, we address one of these challenges, namely, the inclusion of anharmonicities. By performing the expansion of the potential energy surface in localized-mode coordinates instead of the normal-mode coordinates, it becomes possible to calculate anharmonic vibrational spectra of polypeptides efficiently and reliably. We apply this approach to calculate the infrared, Raman, and Raman optical activity spectra of helical alanine polypeptides consisting of up to 20 amino acids. We find that while anharmonicities do not alter the band shapes, simple scaling procedures cannot account for the different shifts found for the individual bands. This closes an important gap in theoretical vibrational spectroscopy by making it possible to quantify the anharmonic contributions and opens the door to a first-principles calculation of multidimensional vibrational spectra.