Reference Correlation for the Thermal Conductivity of n-Hexadecane from the Triple Point to 700 K and up to 50 MPa

Experimental Methodology to Determine Thermal Conductivity of Nanofluids by Using a Commercial Transient Hot-Wire Device

The lack of a standard experimental procedure to determine thermal conductivity of fluids is noticeable in heat transfer processes from practical and fundamental perspectives. Since a wide variety of techniques have been used, reported literature data have huge discrepancies. A common practice is using manufactured thermal conductivity meters for nanofluids, which can standardize the measurements but are also somewhat inaccurate. In this study, a new methodology to perform reliable measurements with a recent commercial transient hot-wire device is introduced. Accordingly, some extensively studied fluids in the literature (water, ethylene glycol, ethylene glycol:water mixture 50:50 vol%, propylene glycol, and n-tetradecane) covering the range 0.100 to 0.700 W m−1 K−1 were used to check the device in the temperature range 283.15 to 333.15 K. Deviations between the collected data and the theoretical model, and repeatabilities and deviations between reported and literature values, were analyzed. Systematic deviations in raw data were found, and a correction factor depending on the mean thermal conductivity was proposed to operate with nanofluids. Considering all tested effects, the expanded (k = 2) uncertainty of the device was set as 5%. This proposed methodology was also checked with n-hexadecane and magnesium-oxide-based n-tetradecane nanofluids.

Reference Correlation for the Thermal Conductivity of Ethane-1,2-diol (Ethylene Glycol) from the Triple Point to 475 K and Pressures up to 100 MPa

We present a new wide-ranging correlation for the thermal conductivity of ethane-1,2-diol (ethylene glycol) based on critically evaluated experimental data. The correlation is designed to be used with an existing equation of state, and it is valid from the triple point to 475 K, at pressures up to 100 MPa. The estimated uncertainty is 2.2 % (at the 95 % confidence level), except in the dilute-gas region which is estimated to be 20 %, as there are no measurements in this region for comparison.

Reference Values and Reference Correlations for the Thermal Conductivity and Viscosity of Fluids

In this paper, reference values and reference correlations for the thermal conductivity and viscosity of pure fluids are reviewed. Reference values and correlations for the thermal conductivity and the viscosity of pure fluids provide thoroughly evaluated data or functional forms and serve to help calibrate instruments, validate or extend models, and underpin some commercial transactions or designs, among other purposes. The criteria employed for the selection of thermal conductivity and viscosity reference values are also discussed; such values, which have the lowest uncertainties currently achievable, are typically adopted and promulgated by international bodies. Similar criteria are employed in the selection of reference correlations, which cover a wide range of conditions, and are often characterized by low uncertainties in their ranges of definition.