Multispectral multidimensional spectrometer spanning the ultraviolet to the mid-infrared

Two-dimensional coherent electronic spectrometer with switchable multi-color configurations

Broadband implementation of two-dimensional electronic spectroscopy (2DES) is a desirable goal for numerous research groups, yet achieving it presents considerable challenges. An effective strategy to mitigate these challenges is the utilization of two-color approaches, effectively broadening the spectral bandwidth accessible with 2DES. Here, we present a simple approach to include multi-color configurations based on adjustable mirror mounts. This enables seamless toggling between single-color, two-color, and transient 2DES within the same spectroscopic apparatus, which is benchmarked on two common laser dyes, Rhodamine 6G and Nile blue. Upon mixing the dyes, single-color 2DES shows overlapping signals, whereas a high selectivity toward Nile blue responses is maintained in two-color and transient 2DES, owing to the fully resonant excitation that is spectrally shifted relative to the detection window. This method is readily implemented in other setups with similar experimental layouts and can be used as a simple solution to overcome existing bandwidth limitations. With the inclusion of transient 2DES, additional insights into excited-state processes can be gained due to its increased sensitivity toward excited-state coherences.

Intraband Exciton Transitions in Photosynthetic Complexes Revealed by Novel Five-Wave-Mixing Spectroscopy

We calculate the χ(4) optical response of an oriented photosystem II reaction center of purple bacteria described by the Frenkel exciton model using nonlinear exciton equations (NEE). This approach treats each chromophore as an anharmonic oscillator and provides an intuitive quasiparticle picture of nonlinear spectroscopic signals of interacting excitons. It provides a computationally powerful description of nonlinear spectroscopic signals that avoids complete diagonalization of the total Hamiltonian. Expressions for the second- and the fourth-order nonlinear signals are derived. The NEE have been successfully employed in the past to describe even-order-wave-mixing. Here, we extend them to aggregates with broken inversion symmetries. Even-order susceptibilities require the introduction of permanent dipoles, which allow to directly probe low-frequency intraband transitions of excitons.

Full visible range two-dimensional electronic spectroscopy with high time resolution

Two-dimensional electronic spectroscopy (2DES) is a powerful method to study coherent and incoherent interactions and dynamics in complex quantum systems by correlating excitation and detection energies in a nonlinear spectroscopy experiment. Such dynamics can be probed with a time resolution limited only by the duration of the employed laser pulses and in a spectral range defined by the pulse spectrum. In the blue spectral range (<500 nm), the generation of sufficiently broadband ultrashort pulses with pulse durations of 10 fs or less has been challenging so far. Here, we present a 2DES setup based on a hollow-core fiber supercontinuum covering the full visible range (400-700 nm). Pulse compression via custom-made chirped mirrors yields a time resolution of <10 fs. The broad spectral coverage, in particular the extension of the pulse spectra into the blue spectral range, unlocks new possibilities for coherent investigations of blue-light absorbing and multichromophoric compounds, as demonstrated by a 2DES measurement of chlorophyll a.

Rapid scan white light two-dimensional electronic spectroscopy with 100 kHz shot-to-shot detection

We demonstrate an approach to two-dimensional electronic spectroscopy (2DES) that combines the benefits of shot-to-shot detection at high-repetition rates with the simplicity of a broadband white light continuum input and conventional optical elements to generate phase-locked pump pulse pairs. We demonstrate this through mutual synchronization between the laser repetition rate, the acousto-optical deflector, the pump delay stage, and the CCD line camera, which allows for rapid scanning of pump optical delay synchronously with the laser repetition rate, while the delay stage is moved at a constant velocity. The resulting shot-to-shot detection scheme is repetition rate scalable and only limited by the CCD line rate and the maximum stage velocity. Using this approach, we demonstrate the measurement of an averaged 2DES absorptive spectrum in as much as 1.2 s of continuous sample exposure per 2D spectrum. We achieve a signal-to-noise ratio of 6.8 for optical densities down to 0.05 with 11.6 s of averaging at 100 kHz laser repetition rate. Combining rapid scanning of mechanical delay lines with shot-to-shot detection as demonstrated here provides a viable alternative to acousto-optic pulse shaping approaches that is repetition-rate scalable, has comparable throughput and sensitivity, and minimizes sample exposure per 2D spectrum with promising micro-spectroscopy applications.

Design and development of a miniature mid-infrared linear variable filter based spectrometer for environmental sensing

Miniaturized, energy-efficient and application-specific spectral sensing systems promise to be a highly sought-after technology in the coming years, with potential applications in areas such as: distributed sensor systems, IoT devices, mobile autonomous platforms, and many others. We present in this work the design, construction and measurement results of a compact, mid-infrared spectrometer working in the 3 - 4 µm spectral region, attractive for applications requiring the identification of polymer materials. The spectrometer is based on linear-variable filters (LVF) combined with an uncooled HgCdTe linear-detector array (LDA). The design and architecture of the device is described and discussed in the context of miniaturization challenges and constraints. Measured spectra of thin polyimide and polystyrene foils are presented to prove the applicability of the developed device to polymer materials detection and identification.

Progress and Prospects in Optical Ultrafast Microscopy in the Visible Spectral Region: Transient Absorption and Two-Dimensional Microscopy

Ultrafast optical microscopy, generally employed by incorporating ultrafast laser pulses into microscopes, can provide spatially resolved mechanistic insight into scientific problems ranging from hot carrier dynamics to biological imaging. This Review discusses the progress in different ultrafast microscopy techniques, with a focus on transient absorption and two-dimensional microscopy. We review the underlying principles of these techniques and discuss their respective advantages and applicability to different scientific questions. We also examine in detail how instrument parameters such as sensitivity, laser power, and temporal and spatial resolution must be addressed. Finally, we comment on future developments and emerging opportunities in the field of ultrafast microscopy.

Versatile Femtosecond Laser Synchronization for Multiple-Timescale Transient Infrared Spectroscopy

Several ways to electronically synchronize different types of amplified femtosecond laser systems are presented based on a single freely programmable electronics hardware: arbitrary-detuning asynchronous optical sampling (ADASOPS), as well as actively locking two femtosecond laser oscillators, albeit not necessarily to the same round-trip frequency. They allow us to rapidly probe a very wide range of timescales, from picoseconds to potentially seconds, in a single transient absorption experiment without the need to move any delay stage. Experiments become possible that address a largely unexplored aspect of many photochemical reactions, in particular in the context of photo-catalysis as well as photoactive proteins, where an initial femtosecond trigger very often initiates a long-lasting cascade of follow-up processes. The approach is very versatile and allows us to synchronize very different lasers, such as a Ti:Sa amplifier and a 100 kHz Yb-laser system. The jitter of the synchronization, and therewith the time-resolution in the transient experiment, lies in the range from 1 to 3 ps, depending on the method. For illustration, transient IR measurements of the excited state solvation and decay of a metal carbonyl complex as well as the full reaction cycle of bacteriorhodopsin are shown. The pros and cons of the various methods are discussed, with regard to the scientific question one might want to address, and also with regard to the laser systems that might be already existent in a laser lab.

Accurate spectrogram restoration algorithm for an echelle spectrometer based on adaptive parameters

The echelle spectrometer is a high-resolution spectrometer that can realize transient direct readings of a full spectrum. To improve the accuracy of the spectrogram restoration model in calibration, multiple-integral time fusion, and an improved adaptive-threshold centroid algorithm are used to overcome noise and improve the accuracy of calculating the light spot position. A seven-parameter pyramid-traversal method is proposed to optimize the parameters of the spectrogram restoration model. The deviation of the spectrogram model is significantly reduced after the parameters are optimized, and the deviation curve fluctuation becomes mild, which greatly improves the model's accuracy after curve fitting.The test results show that the accuracy of the spot position determination algorithm proposed in this paper is 0.1 pixels. In addition to this, the accuracy of the spectral restoration model is controlled within 0.3 pixels in a short-wave stage and 0.7 pixels in a long-wave stage. Compared with the traditional algorithm, the accuracy of spectrogram restoration is more than two times, and the spectral calibration time is less than 45 min.

Charge separation in the photosystem II reaction center resolved by multispectral two-dimensional electronic spectroscopy

The photosystem II reaction center (PSII RC) performs the primary energy conversion steps of oxygenic photosynthesis. While the PSII RC has been studied extensively, the similar time scales of energy transfer and charge separation and the severely overlapping pigment transitions in the Q_y region have led to multiple models of its charge separation mechanism and excitonic structure. Here, we combine two-dimensional electronic spectroscopy (2DES) with a continuum probe and two-dimensional electronic vibrational spectroscopy (2DEV) to study the cyt b559-D1D2 PSII RC at 77 K. This multispectral combination correlates the overlapping Q_y excitons with distinct anion and pigment-specific Q_x and mid-infrared transitions to resolve the charge separation mechanism and excitonic structure. Through extensive simultaneous analysis of the multispectral 2D data, we find that charge separation proceeds on multiple time scales from a delocalized excited state via a single pathway in which Pheo_D1 is the primary electron acceptor, while Chl_D1 and P_D1 act in concert as the primary electron donor.

Broadband visible two-dimensional spectroscopy of molecular dyes

Two-dimensional Fourier transform spectroscopy is a promising technique to study ultrafast molecular dynamics. Similar to transient absorption spectroscopy, a more complete picture of the dynamics requires broadband laser pulses to observe transient changes over a large enough bandwidth, exceeding the inhomogeneous width of electronic transitions, as well as the separation between the electronic or vibronic transitions of interest. Here, we present visible broadband 2D spectra of a series of dye molecules and report vibrational coherences with frequencies up to ∼1400 cm^-1 that were obtained after improvements to our existing two-dimensional Fourier transform setup [Al Haddad et al., Opt. Lett. 40, 312-315 (2015)]. The experiment uses white light from a hollow core fiber, allowing us to acquire 2D spectra with a bandwidth of 200 nm, in a range between 500 and 800 nm, and with a temporal resolution of 10-15 fs. 2D spectra of nile blue, rhodamine 800, terylene diimide, and pinacyanol iodide show vibronic spectral features with at least one vibrational mode and reveal information about structural motion via coherent oscillations of the 2D signals during the population time. For the case of pinacyanol iodide, these observations are complemented by its Raman spectrum, as well as the calculated Raman activity at the ground- and excited-state geometry.

Polarization-independent pulse retrieval based on frequency resolved optical switching

We demonstrate experimentally that the frequency resolved optical switching (FROSt) method is independent of the polarization direction of the pulse to be characterized. In this perspective, it is employed to characterize two or three co-propagating pulses linearly polarized in orthogonal directions, enabling to retrieve simultaneously their temporal intensity and phase profiles together with their group delay. This technique is also applied to track a simple nonlinear process involving different polarization states: type-I second harmonic generation (SHG). We are able to characterize the depleted fundamental pulse along with the generated second-harmonic pulse, thus demonstrating that the FROSt technique is a practical and powerful tool to observe nonlinear processes both in the temporal and spectral domains even if it involves different polarization states.

Two-dimensional electronic-vibrational spectroscopy: Exploring the interplay of electrons and nuclei in excited state molecular dynamics

Two-dimensional electronic-vibrational spectroscopy (2DEVS) is an emerging spectroscopic technique which exploits two different frequency ranges for the excitation (visible) and detection (infrared) axes of a 2D spectrum. In contrast to degenerate 2D techniques, such as 2D electronic or 2D infrared spectroscopy, the spectral features of a 2DEV spectrum report cross correlations between fluctuating electronic and vibrational energy gaps rather than autocorrelations as in the degenerate spectroscopies. The center line slope of the spectral features reports on this cross correlation function directly and can reveal specific electronic-vibrational couplings and rapid changes in the electronic structure, for example. The involvement of the two types of transition moments, visible and infrared, makes 2DEVS very sensitive to electronic and vibronic mixing. 2DEV spectra also feature improved spectral resolution, making the method valuable for unraveling the highly congested spectra of molecular complexes. The unique features of 2DEVS are illustrated in this paper with specific examples and their origin described at an intuitive level with references to formal derivations provided. Although early in its development and far from fully explored, 2DEVS has already proven to be a valuable addition to the tool box of ultrafast nonlinear optical spectroscopy and is of promising potential in future efforts to explore the intricate connection between electronic and vibrational nuclear degrees of freedom in energy and charge transport applications.

Two-dimensional ultrafast transient absorption spectrograph covering deep-ultraviolet to visible spectral region optimized for biomolecules

We report on the implementation of a multi-kHz single-shot referenced non-coherent two-dimensional UV spectrograph based on conventional pump-probe geometry. It has the capability to cover a broad spectral region in excitation from 270-to-380 nm and in the detection from 270-to-390 nm and 320-to-720 nm. Other setups features are: an unprecedented time resolution of 33 fs (standard deviation); signals are photometrically corrected; a single-shot noise of <1 mOD. It has the capability to operate with sample volumes as small as few μl which is an accomplishment in studying biological or biomimetic systems. To show its performances and potentials, we report two preliminary studies on the photophysics of phenanthrenes hosted in a multichromophoric antenna system and of aromatic amino acids in a blue-copper azurin.

Multidimensional time-of-flight spectroscopy

Experimental methods based on a wide range of physical principles are used to determine carrier mobilities for light-harvesting materials in photovoltaic cells. For example, in a time-of-flight experiment, a single laser pulse photoexcites the active layer of a device, and the transit time is determined by the arrival of carriers at an acceptor electrode. With inspiration from this conventional approach, we present a multidimensional time-of-flight technique in which carrier transport is tracked with a second intervening laser pulse. Transient populations of separate material components of an active layer may then be established by tuning the wavelengths of the laser pulses into their respective electronic resonances. This experimental technique is demonstrated using photovoltaic cells based on mixtures of organohalide perovskite quantum wells. In these "layered perovskite" systems, charge carriers are funneled between quantum wells with different thicknesses because of staggered band alignments. Multidimensional time-of-flight measurements show that these funneling processes do not support long-range transport because of carrier trapping. Rather, our data suggest that the photocurrent is dominated by processes in which the phases of the thickest quantum wells absorb light and transport carriers without transitions into domains occupied by quantum wells with smaller sizes. These same conclusions cannot be drawn using conventional one-dimensional techniques for measuring carrier mobilities. Advantages and disadvantages of multidimensional time-of-flight experiments are discussed in the context of a model for the signal generation mechanism.

Excitonic structure and charge separation in the heliobacterial reaction center probed by multispectral multidimensional spectroscopy

Photochemical reaction centers are the engines that drive photosynthesis. The reaction center from heliobacteria (HbRC) has been proposed to most closely resemble the common ancestor of photosynthetic reaction centers, motivating a detailed understanding of its structure-function relationship. The recent elucidation of the HbRC crystal structure motivates advanced spectroscopic studies of its excitonic structure and charge separation mechanism. We perform multispectral two-dimensional electronic spectroscopy of the HbRC and corresponding numerical simulations, resolving the electronic structure and testing and refining recent excitonic models. Through extensive examination of the kinetic data by lifetime density analysis and global target analysis, we reveal that charge separation proceeds via a single pathway in which the distinct A₀ chlorophyll a pigment is the primary electron acceptor. In addition, we find strong delocalization of the charge separation intermediate. Our findings have general implications for the understanding of photosynthetic charge separation mechanisms, and how they might be tuned to achieve different functional goals.

The primary energy conversion step in photosynthesis, charge separation, takes place in the reaction center. Here the authors investigate the heliobacterial reaction center using multispectral two-dimensional electronic spectroscopy, identifying the primary electron acceptor and revealing the charge separation mechanism.

Multimode two-dimensional vibronic spectroscopy. I. Orientational response and polarization-selectivity

Two-dimensional Electronic-Vibrational (2D EV) spectroscopy and two-dimensional Vibrational-Electronic (2D VE) spectroscopy are among the newest additions to the coherent multidimensional spectroscopy toolbox, and they are directly sensitive to vibronic couplings. In this first of two papers, the complete orientational response functions are developed for a model system consisting of two coupled anharmonic oscillators and two electronic states in order to simulate polarization-selective 2D EV and 2D VE spectra with arbitrary combinations of linearly polarized electric fields. Here, we propose analytical methods to isolate desired signals within complicated spectra and to extract the relative orientation between vibrational and vibronic dipole moments of the model system using combinations of polarization-selective 2D EV and 2D VE spectral features. Time-dependent peak amplitudes of coherence peaks are also discussed as means for isolating desired signals within the time-domain. This paper serves as a field guide for using polarization-selective 2D EV and 2D VE spectroscopies to map coupled vibronic coordinates on the molecular frame.

Direct comparison of amplitude and geometric measures of spectral inhomogeneity using phase-cycled 2D-IR spectroscopy

Two-dimensional infrared (2D-IR) spectroscopy provides access to equilibrium dynamics with the extraction of the frequency-fluctuation correlation function (FFCF) from the measured spectra. Several different methods of obtaining the FFCF from experimental spectra, such as the center line slope (CLS), ellipticity, phase slope, and nodal line slope, all depend on the geometrical nature of the 2D line shape and necessarily require spectral extent in order to achieve a measure of the FFCF. Amplitude measures, on the other hand, such as the inhomogeneity index, rely only on signal amplitudes and can, in principle, be computed using just a single point in a 2D spectrum. With a pulse shaper-based 2D-IR spectrometer, in conjunction with phase cycling, we separate the rephasing and nonrephasing signals used to determine the inhomogeneity index. The same measured data provide the absorptive spectrum, needed for the CLS. Both methods are applied to two model molecular systems: tungsten hexacarbonyl (WCO₆) and methylcyclopentadienyl manganese tricarbonyl [Cp'Mn(CO)₃, MCMT]. The three degenerate IR modes of W(CO)₆ lack coherent modulation or noticeable intramolecular vibrational redistribution (IVR) and are used to establish a baseline comparison. The two bands of the MCMT tripod complex include intraband coherences and IVR as well as likely internal torsional motion on a few-picosecond time scale. We find essentially identical spectral diffusion, but faster, non-equilibrium dynamics lead to differences in the FFCFs extracted with the two methods. The inhomogeneity index offers an advantage in cases where spectra are complex and energy transfer can mimic line shape changes due to frequency fluctuations.

Frequency comb-based multidimensional coherent spectroscopy bridges the gap between fundamental science and cutting-edge technology

Optical multidimensional coherent spectroscopy (MDCS) has become a powerful and routine technique for studying optical properties of a wide range of materials. However, current implementations of MDCS have spectral resolution and acquisition speed limitations. In this Perspective, I describe how frequency comb technology can be used to overcome the limitations and also show the recent progress that has been made in this field.

Mechanistic Study of Charge Separation in a Nonfullerene Organic Donor-Acceptor Blend Using Multispectral Multidimensional Spectroscopy

Organic photovoltaics (OPVs) based on nonfullerene acceptors are now approaching commercially viable efficiencies. One key to their success is efficient charge separation with low potential loss at the donor-acceptor heterojunction. Due to the lack of spectroscopic probes, open questions remain about the mechanisms of charge separation. Here, we study charge separation of a model system composed of the donor, poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione) (PBDB-T), and the nonfullerene acceptor, 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC), using multidimensional spectroscopy spanning the visible to the mid-infrared. We find that bound polaron pairs (BPPs) generated within ITIC domains play a dominant role in efficient hole transfer, transitioning to delocalized polarons within 100 fs. The weak electron-hole binding within the BPPs and the resulting polaron delocalization are key factors for efficient charge separation at nearly zero driving force. Our work provides useful insight into how to further improve the power conversion efficiency in OPVs.

iSPECTRON: A simulation interface for linear and nonlinear spectra with ab-initio quantum chemistry software

We introduce iSPECTRON, a program that parses data from common quantum chemistry software (NWChem, OpenMolcas, Gaussian, Cobramm, etc.), produces the input files for the simulation of linear and nonlinear spectroscopy of molecules with the Spectron code, and analyzes the spectra with a broad range of tools. Vibronic spectra are expressed in term of the electronic eigenstates, obtained from quantum chemistry computations, and vibrational/bath effects are incorporated in the framework of the displaced harmonic oscillator model, where all required quantities are computed at the Franck-Condon point. The program capabilities are illustrated by simulating linear absorption, transient absorption and two dimensional electronic spectra of the pyrene molecule. Calculations at two levels of electronic structure theory, time-dependent density functional theory (with NWChem) and RASSCF/RASPT2 (with OpenMolcas) are presented and compared where possible. The iSPECTRON program is available online at https://github.com/ispectrongit/iSPECTRON/ and distributed open source under the terms of the Educational Community License version 2.0 (ECL 2.0).

Probing the heterogeneous structure of eumelanin using ultrafast vibrational fingerprinting

Eumelanin is a brown-black biological pigment with sunscreen and radical scavenging functions important to numerous organisms. Eumelanin is also a promising redox-active material for energy conversion and storage, but the chemical structures present in this heterogeneous pigment remain unknown, limiting understanding of the properties of its light-responsive subunits. Here, we introduce an ultrafast vibrational fingerprinting approach for probing the structure and interactions of chromophores in heterogeneous materials like eumelanin. Specifically, transient vibrational spectra in the double-bond stretching region are recorded for subsets of electronic chromophores photoselected by an ultrafast excitation pulse tuned through the UV-visible spectrum. All subsets show a common vibrational fingerprint, indicating that the diverse electronic absorbers in eumelanin, regardless of transition energy, contain the same distribution of IR-active functional groups. Aggregation of chromophores diverse in oxidation state is the key structural property underlying the universal, ultrafast deactivation behavior of eumelanin in response to photoexcitation with any wavelength.

Electronic measurement of femtosecond time delays for arbitrary-detuning asynchronous optical sampling

Arbitrary-Detuning ASynchronous OPtical Sampling (ADASOPS) is a pump-probe technique which relies on the stability of femtosecond oscillators. It provides access to a multiscale time window ranging up to millisecond, combined with a sub-picosecond time resolution. In contrast with the first ADASOPS demonstration based on the interferometric detection of coincidences between optical pulses, we show here that the optical setup can now be reduced to a mere pair of photodetectors embedded in a specially-designed electronic system. In analogy with super-resolution methods used in optical microscopy for localizing single emitters beyond the diffraction limit, we demonstrate that purely electronic means allow the determination of time delays between each pump-probe pulse pair with a standard deviation as small as 200 fs. The new method is shown to be simpler, more versatile and more accurate than the coincidence-based approach.

Efficient Charge Generation via Hole Transfer in Dilute Organic Donor-Fullerene Blends

Efficient organic photovoltaics (OPVs) require broadband charge photogeneration with near-unity quantum yield. This can only be achieved by exploiting all pathways that generate charge. Electron transfer from organic donors to acceptors has been well-studied and is considered the primary path to charge photogeneration in OPVs. In contrast, much less is known about the hole transfer pathway. Here we study charge photogeneration in an archetypal system comprising tetraphenyldibenzoperiflanthene:C₇₀ blends using our recently developed multispectral two-dimensional electronic spectroscopy (M-2DES), supported by time-dependent density functional theory and fully quantum-mechanical Fermi's golden rule rate calculations. Our approach identifies in real time two rapid charge transfer pathways that are confirmed through computational analysis. Surprisingly, we find that both electron and hole transfer occur with comparable rates and efficiencies, facilitated by donor-acceptor electronic interactions. Our results highlight the importance of the hole transfer pathway for optimizing the efficiency of OPV devices employing small-molecule heterojunctions.

Vibronic structure of photosynthetic pigments probed by polarized two-dimensional electronic spectroscopy and ab initio calculations

Bacteriochlorophyll a (Bchl a) and chlorophyll a (Chl a) play important roles as light absorbers in photosynthetic antennae and participate in the initial charge-separation steps in photosynthetic reaction centers. Despite decades of study, questions remain about the interplay of electronic and vibrational states within the Q-band and its effect on the photoexcited dynamics. Here we report results of polarized two-dimensional electronic spectroscopic measurements, performed on penta-coordinated Bchl a and Chl a and their interpretation based on state-of-the-art time-dependent density functional theory calculations and vibrational mode analysis for spectral shapes. We find that the Q-band of Bchl a is comprised of two independent bands, that are assigned following the Gouterman model to Q x and Q y states with orthogonal transition dipole moments. However, we measure the angle to be ∼75°, a finding that is confirmed by ab initio calculations. The internal conversion rate constant from Q x to Q y is found to be 11 ps-1. Unlike Bchl a, the Q-band of Chl a contains three distinct peaks with different polarizations. Ab initio calculations trace these features back to a spectral overlap between two electronic transitions and their vibrational replicas. The smaller energy gap and the mixing of vibronic states result in faster internal conversion rate constants of 38-50 ps-1. We analyze the spectra of penta-coordinated Bchl a and Chl a to highlight the interplay between low-lying vibronic states and their relationship to photoinduced relaxation. Our findings shed new light on the photoexcited dynamics in photosynthetic systems where these chromophores are primary pigments.