Molecular rotation in 3 dimensions at an air/water interface using femtosecond time resolved sum frequency generation

In-plane orientational motions of the functional groups of molecules at the air/water interface by time-resolved vibrational sum frequency generation

The movements of molecules at interfaces and surfaces are restricted by their asymmetric environments, leading to anisotropic orientational motions. In this work, in-plane orientational motions of the -C=O and -CF3 groups of coumarin 153 (C153) at the air/water interface were measured using time-resolved (TR) vibrational sum frequency generation (SFG). The in-plane orientational time constants of the -C=O and -CF3 groups of C153 are found to be 41.5 ± 8.2 and 36.0 ± 4.5 ps. These values are over five-times faster than that of 198 ± 15 ps for the permanent dipole of the whole C153 molecule at the interface, which may indicate that the two groups experience different interfacial friction in the plane. These differences could also be the result of the permanent dipole of C153 being almost five times those of the -C=O and -CF3 groups. The difference in orientational motions reveals the microscopic heterogeneous environment that molecules experience at the interface. While the interfacial dynamics of the two functional groups are similar, our TR-SFG experiments allowed the quantification of the in-plane dynamics of individual functional groups for the first time. Our experimental findings about the interfacial molecular motion have implications for molecular rotations, energy transfer, and charge transfer at material interfaces, photocatalysis interfaces, and biological cell/membrane aqueous interfaces.

Conical Intersections at Interfaces Revealed by Phase-Cycling Interface-Specific Two-Dimensional Electronic Spectroscopy (i2D-ES)

Conical intersections (CIs) hold significant stake in manipulating and controlling photochemical reaction pathways of molecules at interfaces and surfaces by affecting molecular dynamics therein. Currently, there is no tool for characterizing CIs at interfaces and surfaces. To this end, we have developed phase-cycling interface-specific two-dimensional electronic spectroscopy (i2D-ES) and combined it with advanced computational modeling to explore nonadiabatic CI dynamics of molecules at the air/water interface. Specifically, we integrated the phase locked pump pulse pair with an interface-specific electronic probe to obtain the two-dimensional interface-specific responses. We demonstrate that the nonadiabatic transitions of an interface-active azo dye molecule that occur through the CIs at the interface have different kinetic pathways from those in the bulk water. Upon photoexcitation, two CIs are present: one from an intersection of an optically active S2 state with a dark S1 state and the other from the intersection of the progressed S1 with the ground state S0. We find that the molecular conformations in the ground state are different for interfacial molecules. The interfacial molecules are intimately correlated with the locally populated excited state S2 being farther away from the CI region. This leads to slower nonadiabatic dynamics at the interface than in bulk water. Moreover, we show that the nonadiabatic transition from the S1 dark state to the ground state is significantly longer at the interface than that in the bulk, which is likely due to the orientationally restricted configuration of the excited state at the interface. Our findings suggest that orientational configurations of molecules manipulate reaction pathways at interfaces and surfaces.

The Role of Sum-Frequency Generation Spectroscopy in Understanding On-Surface Reactions and Dynamics in Atmospheric Model-Systems

Surfaces, both water/air and solid/water, play an important role in mediating a multitude of processes central to atmospheric chemistry, particularly in the aerosol phase. However, the study of both static and dynamic properties of surfaces is highly challenging from an experimental standpoint, leading to a lack of molecular level information about the processes that take place at these systems and how they differ from bulk. One of the few techniques that has been able to capture ultrafast surface phenomena is time-resolved sum-frequency generation (SFG) spectroscopy. Since it is both surface-specific and chemically sensitive, the extension of this spectroscopic technique to the time domain makes it possible to study dynamic processes on the femtosecond time scale. In this Perspective, we will explore recent advances made in the field both in terms of studying energy dissipation as well as chemical reactions and the role the surface geometry plays in these processes.

Orientational Coupling of Molecules at Interfaces Revealed by Two-Dimensional Electronic-Vibrational Sum Frequency Generation (2D-EVSFG)

Photoinduced relaxation processes at interfaces are intimately related to many fields such as solar energy conversion, photocatalysis, and photosynthesis. Vibronic coupling plays a key role in the fundamental steps of the interface-related photoinduced relaxation processes. Vibronic coupling at interfaces is expected to be different from that in bulk due to the unique environment. However, vibronic coupling at interfaces has not been well understood due to the lack of experimental tools. We have recently developed a two-dimensional electronic-vibrational sum frequency generation (2D-EVSFG) for vibronic coupling at interfaces. In this work, we present orientational correlations in vibronic couplings of electronic and vibrational transition dipoles as well as the structural evolution of photoinduced excited states of molecules at interfaces with the 2D-EVSFG technique. We used malachite green molecules at the air/water interface as an example, to be compared with those in bulk revealed by 2D-EV. Together with polarized VSFG and ESHG experiments, polarized 2D-EVSFG spectra were used to extract relative orientations of an electronic transition dipole and vibrational transition dipoles at the interface. Combined with molecular dynamics calculations, time-dependent 2D-EVSFG data have demonstrated that structural evolutions of photoinduced excited states at the interface have different behaviors than those in bulk. Our results showed that photoexcitation leads to intramolecular charge transfer but no conical interactions in 25 ps. Restricted environment and orientational orderings of molecules at the interface are responsible for the unique features of vibronic coupling.

Tutorial on the instrumentation of sum frequency generation vibrational spectroscopy: Using a Ti:sapphire based system as an example

Sum frequency generation vibrational spectroscopy (SFG-VS) is an intrinsically surface-selective vibrational spectroscopic technique based on the second-order nonlinear optical process. Since its birth in the 1980s, SFG-VS has been used to solve interfacial structure and dynamics in a variety of research fields including chemistry, physics, materials sciences, biological sciences, environmental sciences, etc. Better understanding of SFG-VS instrumentation is no doubt an essential step to master this sophisticated technique. To address this need, here we will present a Tutorial with respect to the classification, setup layout, construction, operation, and data processing about SFG-VS. We will focus on the steady state Ti:sapphire based broad bandwidth SFG-VS system and use it as an example. We hope this Tutorial is beneficial for newcomers to the SFG-VS field and for people who are interested in using SFG-VS technique in their research.

Polarization-Dependent Heterodyne-Detected Sum-Frequency Generation Spectroscopy as a Tool to Explore Surface Molecular Orientation and Ångström-Scale Depth Profiling

Sum-frequency generation (SFG) spectroscopy provides a unique optical probe for interfacial molecules with interface-specificity and molecular specificity. SFG measurements can be further carried out at different polarization combinations, but the target of the polarization-dependent SFG is conventionally limited to investigating the molecular orientation. Here, we explore the possibility of polarization-dependent SFG (PD-SFG) measurements with heterodyne detection (HD-PD-SFG). We stress that HD-PD-SFG enables accurate determination of the peak amplitude, a key factor of the PD-SFG data. Subsequently, we outline that HD-PD-SFG can be used not only for estimating the molecular orientation but also for investigating the interfacial dielectric profile and studying the depth profile of molecules. We further illustrate the variety of combined simulation and PD-SFG studies.

Real-time monitoring the interfacial dynamic processes at model cell membranes: Taking cell penetrating peptide TAT as an example

A real-time and molecule-level monitoring of the interfacial dynamic interactions between molecules and a cell membrane is of vital importance. Herein, taking TAT, one of the most representative cell penetrating peptides, as an example, a photo-voltage transient technique and a dynamic giant bistratal vesicle (GBV) leakage method were combined with the traditional giant unilamellar vesicle (GUV) leakage assays, to provide a molecule-level understanding of the dynamic membrane interaction process performed in a low ionic strength and neutral pH condition. The photo-voltage test based on supported phospholipid bilayers showed a quick disturbance (<1 min) followed by a continuous reconstruction of the membrane by peptides, leading to a slight destruction (at TAT concentrations lower than 1 μg mL^-1, i.e., 0.64 μM) or strong damage (e.g. at 10 μg mL^-1, i.e., 6.4 μM) of the bilayer structure. The GUV/GBV leakage assays further demonstrated the TAT-induced membrane deformation and transmembrane diffusion of dyes, which occurred in an immediate, linear, and TAT-concentration dependent manner. Moreover, the flux of dye across the substrate-immobilized membranes was approximately three times of that across the substrate-free ones. This work gives information on time and molecular mechanism of the TAT-membrane interactions, demonstrates the different permeabilizing effects of TAT on immobilized and free membranes. Overall, it provides useful strategies to investigate the nano-bio interfacial interactions in a simple, global and real-time way.

A real-time and in-situ monitoring of the molecular interactions between drug carrier polymers and a phospholipid membrane

The dynamic interactions between drug carrier molecules and a cell membrane can not be ignored in their clinical use. Here a simple, label-free and non-invasive approach, photo-voltage transient method, combined with the atomic force microscopy, dynamic giant unilamellar vesicle leakage assay and cytotoxicity method, was employed for a real-time monitoring of the interaction process. Two representative polymer molecules, polyoxyethylene (35) lauryl ether (Brij35) and polyvinylpyrrolidone (PVPk30), were taken as examples to interact with a phospholipid bilayer membrane in a low ionic strength and neutral pH condition. Brij35 demonstrated an adsorption-accumulation-permeabilization dominated process under the modulation of polymer concentration in the solution. In contrast, PVPk30 performed a dynamic balance between adsorption-desorption of the molecules and/or permeabilization-resealing of the membrane. Such difference explains the high and low cytotoxicity of them, respectively, in the living cell tests. Briefly, through combining the photo-voltage approach with conventional fluorescent microscopy method, this work demonstrates new ideas on the time and membrane actions of polymer surfactants which should be taken into account for their biomedical applications.

Two-dimensional electronic-vibrational sum frequency spectroscopy for interactions of electronic and nuclear motions at interfaces

Interactions of electronic and vibrational degrees of freedom are essential for understanding excited-states relaxation pathways of molecular systems at interfaces and surfaces. Here, we present the development of interface-specific two-dimensional electronic-vibrational sum frequency generation (2D-EVSFG) spectroscopy for electronic-vibrational couplings for excited states at interfaces and surfaces. We demonstrate this 2D-EVSFG technique by investigating photoexcited interface-active (E)-4-((4-(dihexylamino) phenyl)diazinyl)-1-methylpyridin-1- lum (AP3) molecules at the air-water interface as an example. Our 2D-EVSFG experiments show strong vibronic couplings of interfacial AP3 molecules upon photoexcitation and subsequent relaxation of a locally excited (LE) state. Time-dependent 2D-EVSFG experiments indicate that the relaxation of the LE state, S ₂, is strongly coupled with two high-frequency modes of 1,529.1 and 1,568.1 cm^-1 Quantum chemistry calculations further verify that the strong vibronic couplings of the two vibrations promote the transition from the S ₂ state to the lower excited state S ₁ We believe that this development of 2D-EVSFG opens up an avenue of understanding excited-state dynamics related to interfaces and surfaces.

Development of interface-/surface-specific two-dimensional electronic spectroscopy

Structures, kinetics, and chemical reactivities at interfaces and surfaces are key to understanding many of the fundamental scientific problems related to chemical, material, biological, and physical systems. These steady-state and dynamical properties at interfaces and surfaces require even-order techniques with time-resolution and spectral-resolution. Here, we develop fourth-order interface-/surface-specific two-dimensional electronic spectroscopy, including both two-dimensional electronic sum frequency generation (2D-ESFG) spectroscopy and two-dimensional electronic second harmonic generation (2D-ESHG) spectroscopy, for structural and dynamics studies of interfaces and surfaces. The 2D-ESFG and 2D-ESHG techniques were based on a unique laser source of broadband short-wave IR from 1200 nm to 2200 nm from a home-built optical parametric amplifier. With the broadband short-wave IR source, surface spectra cover most of the visible light region from 480 nm to 760 nm. A translating wedge-based identical pulses encoding system (TWINs) was introduced to generate a phase-locked pulse pair for coherent excitation in the 2D-ESFG and 2D-ESHG. As an example, we demonstrated surface dark states and their interactions of the surface states at p-type GaAs (001) surfaces with the 2D-ESFG and 2D-ESHG techniques. These newly developed time-resolved and interface-/surface-specific 2D spectroscopies would bring new information for structure and dynamics at interfaces and surfaces in the fields of the environment, materials, catalysis, and biology.

Interface-Specific Two-Dimensional Electronic Sum Frequency Generation Spectroscopy

High even-order surface/interface specific spectroscopy has the potential to provide more structural and dynamical information about surfaces and interfaces. In this work, we developed a novel fourth-order interface-specific two-dimensional electronic sum frequency generation (2D-ESFG) for structures and dynamics at surfaces and interfaces. A translating wedge-based identical pulses encoding system (TWINs) was introduced to generate phase-locked pulse pairs for coherent pump beams in 2D-ESFG. As a proof-of-principle experiment, fourth-order 2D-ESFG spectroscopy was used to demonstrate couplings of surface states for both n-type and p-type GaAs (100). We found surface dark state within the bandgap of the GaAs in 2D-ESFG spectra, which could not be observed in one-dimensional ESFG spectra. To our best knowledge, this is a first demonstration of interface-specific two-dimensional electronic spectroscopy. The development of the 2D-ESFG spectroscopy will provide new structural probes of spectral diffusion, conformational dynamics, energy transfer, and charge transfer for surfaces and interfaces.