Thermal transport at a nanoparticle-water interface: A molecular dynamics and continuum modeling study

Regulating interparticle proximity in plasmonic nanosphere aggregates to enhance photoacoustic response and photothermal stability

Designing plasmonic nanoparticles for biomedical photoacoustic (PA) imaging involves tailoring material properties at the nanometer scale. A key in developing plasmonic PA contrast nanoagents is to engineer their enhanced optical responses in the near-infrared wavelength range, as well as heat transfer properties and photostability. This study introduces anisotropic plasmonic nanosphere aggregates with close interparticle proximity as photostable and efficient contrast agent for PA imaging. Silver (Ag), among plasmonic metals, is particularly attractive due to its strongest optical response and highest heat conductivity. Our results demonstrate that close interparticle proximity in silver nanoaggregates (AgNAs), spatially confined within a polymer shell layer, leads to blackbody-like optical absorption, resulting in robust PA signals through efficient pulsed heat generation and transfer. Additionally, our AgNAs exhibit a high photodamage threshold highlighting their potential to outperform conventional plasmonic contrast agents for high-contrast PA imaging over multiple imaging sessions. Furthermore, we demonstrate the capability of the AgNAs for molecular PA cancer imaging in vivo by incorporating a tumor-targeting peptide moiety.

Increasing contrast in water-embedded particles via time-gated mid-infrared photothermal microscopy

The transient dynamics of photothermal signals provide interesting insights into material properties and heat diffusion. In a mid-infrared (mid-IR) photothermal microscope, the imaging contrast in a standard amplitude imaging can decrease due to thermal diffusion effects. It is shown that contrast varies for poly-methyl 2-methylpropenoate (PMMA) particles of different sizes when embedded in an absorbing medium of water (H2O) based on levels of heat exchange under the water absorption resonance. Using time-resolved boxcar (BC) detection, analysis of the transient thermal dynamics at the bead-water interface is presented, and the time decay parameters for 500 nm and 100 nm beads are determined. Enhanced (negative) imaging contrast is observed for less heat exchange between the water and bead, as in the case for the 100 nm bead. For the 500 nm bead, boxcar imaging before heat exchange starts occurring, leads to an increase of the imaging contrast up to a factor of 1.6.

Vapor Nanobubbles around Heated Nanoparticles: Wetting Dependence of the Local Fluid Thermodynamics and Kinetics of Nucleation

Plasmonic nanobubbles are composite objects resulting from the interaction between light and metallic nanoparticles immersed in a fluid. Plasmonic nanobubbles have applications in photothermal therapies, drug delivery, microfluidic manipulations, and solar energy conversion. Their early formation is, however, barely characterized due to the short time and length scales relevant to the process. Here, we investigate, using molecular dynamics (MD) simulations, the effect of nanoparticle wettability on both the local fluid thermodynamics and the kinetics of nanobubble generation in water. We first show that the local onset temperature of vapor nucleation decreases with the nanoparticle/water interfacial energy and may be 100 K below the water spinodal temperature in the case of weak nanoparticle/water interactions. Second, we demonstrate that vapor nucleation may be slower in the case of weak water/nanoparticle interactions. This result, which is qualitatively at odds with the predictions of isothermal classical nucleation theory, may be explained by the competition between two antagonist effects: while, classically, hydrophobicity increases the vapor nucleation rate, it also penalizes interfacial thermal transfer, slowing down kinetics. The kinetics of heat transfer from the nanoparticle to water is controlled by the interfacial thermal conductance. This quantity turns out not only to decrease with the nanoparticle hydrophobicity but also drops down prior to phase change, yielding even longer nucleation times. Such conclusions were reached by considering the comparison between MD and continuous heat transfer models. These results put forward the role of nanoparticle wettability in the generation of plasmonic nanobubbles observed experimentally and open the path to the control of boiling using nanopatterned surfaces.

Time-Resolved Mid-Infrared Photothermal Microscopy for Imaging Water-Embedded Axon Bundles

Few experimental tools exist for performing label-free imaging of biological samples in a water-rich environment due to the high infrared absorption of water, overlapping with major protein and lipid bands. A novel imaging modality based on time-resolved mid-infrared photothermal microscopy is introduced and applied to imaging axon bundles in a saline bath environment. Photothermally induced spatial gradients at the axon bundle membrane interfaces with saline and surrounding biological tissue are observed and temporally characterized by a high-speed boxcar detection system. Localized time profiles with an enhanced signal-to-noise, hyper-temporal image stacks, and two-dimensional mapping of the time decay profiles are acquired without the need for complex post image processing. Axon bundles are found to have a larger distribution of time decay profiles compared to the water background, allowing background differentiation based on these transient dynamics. The quantitative analysis of the signal evolution over time allows characterizing the level of thermal confinement at different regions. When axon bundles are surrounded by complex heterogeneous tissue, which contains smaller features, a stronger thermal confinement is observed compared to a water environment, thus shedding light on the heat transfer dynamics across aqueous biological interfaces.

Enhanced Heat Flow between Charged Nanoparticles and an Aqueous Electrolyte

Heat transfer through the interface between a metallic nanoparticle and an electrolyte solution has great importance in a number of applications, ranging from nanoparticle-based cancer treatments to nanofluids and solar energy conversion devices. However, the impact of the surface charge and dissolved ions on heat transfer has been scarcely explored so far. In this study, we compute the interface thermal conductance between hydrophilic and hydrophobic charged gold nanoparticles immersed in an electrolyte using equilibrium molecular dynamics simulations. Compared with an uncharged nanoparticle, we report a 3-fold increase of the Kapitza conductance for a nanoparticle surface charge of +320 mC/m2. This enhancement is shown to be approximately independent of the surface wettability, charge spatial distribution, and salt concentration. This allows us to express the Kapitza conductance enhancement in terms of the surface charge density on a master curve. Finally, we interpret the increase of the Kapitza conductance as a combined result of the shift of the water density distribution toward the charged nanoparticle and an accumulation of the counterions around the nanoparticle surface which increase the Coulombic interaction between the liquid and the charged nanoparticle. These considerations help us to apprehend the role of ions in heat transfer close to electrified surfaces.

Differentiating Thermal Conductances at Semiconductor Nanocrystal/Ligand and Ligand/Solvent Interfaces in Colloidal Suspensions

Infrared-pump, electronic-probe (IPEP) spectroscopy is used to measure heat flow into and out of CdSe nanocrystals suspended in an organic solvent, where the surface ligands are initially excited with an infrared pump pulse. Subsequently, the heat is transferred from the excited ligands to the nanocrystals and in parallel to the solvent. Parallel heat transfer in opposite directions uniquely enables us to differentiate the thermal conductances at the nanocrystal/ligand and ligand/solvent interfaces. Using a novel solution to the heat diffusion equation, we fit the IPEP data to find that the nanocrystal/ligand conductances range from 88 to 135 MW m^-2 K^-1 and are approximately 1 order of magnitude higher than the ligand/solvent conductances, which range from 7 to 26 MW m^-2 K^-1. Transient nonequilibrium molecular dynamics (MD) simulations of nanocrystal suspensions agree with IPEP data and show that ligands bound to the nanocrystal by bidentate bonds have more than twice the per-ligand conductance as those bound by monodentate bonds.

Nonreciprocal forces enable cold-to-hot heat transfer between nanoparticles

We study the heat transfer between two nanoparticles held at different temperatures that interact through nonreciprocal forces, by combining molecular dynamics simulations with stochastic thermodynamics. Our simulations reveal that it is possible to construct nano refrigerators that generate a net heat transfer from a cold to a hot reservoir at the expense of power exerted by the nonreciprocal forces. Applying concepts from stochastic thermodynamics to a minimal underdamped Langevin model, we derive exact analytical expressions predictions for the fluctuations of work, heat, and efficiency, which reproduce thermodynamic quantities extracted from the molecular dynamics simulations. The theory only involves a single unknown parameter, namely an effective friction coefficient, which we estimate fitting the results of the molecular dynamics simulation to our theoretical predictions. Using this framework, we also establish design principles which identify the minimal amount of entropy production that is needed to achieve a certain amount of uncertainty in the power fluctuations of our nano refrigerator. Taken together, our results shed light on how the direction and fluctuations of heat flows in natural and artificial nano machines can be accurately quantified and controlled by using nonreciprocal forces.

Size-dependent effects of the thermal transport at gold nanoparticle-water interfaces

The transfer of heat from a plasmonic nanoparticle to its water environment has numerous applications in the fields of solar energy conversion and photothermal therapies. We use non-equilibrium molecular dynamics to investigate the size-dependent effects of the interfacial thermal conductance of gold nanoparticles immersed in water and of tunable wettability. The interfacial thermal conductance is found to increase when the nanoparticle size decreases. We rationalize such a behavior with a generalized acoustic model, where the interfacial bonding decreases with the nanoparticle size. The analysis of the interfacial thermal spectrum reveals the importance of the low frequency peak of the nanoparticle spectrum as it matches relatively well the oxygen peak in the vibrational spectrum. However, by reducing the nanoparticle size, the low frequency peak is exacerbated, explaining the enhanced heat transfer observed for small nanoparticles. Finally, we assess the accuracy of continuum heat transferequations to describe the thermal relaxation of small nanoparticles with initial high temperatures.We show that, before the nanoparticle looses its integrity, the continuum model succeed in describing with small percentage deviations the molecular-dynamics data. This work brings a simple methodology to understand, beyond the plasmonic nanoparticles, thermal boundary conductance between a nanopartice and its environment.

Intracellular Aβ42 Aggregation Leads to Cellular Thermogenesis

The aggregation of Aβ42 is a hallmark of Alzheimer’s disease. It is still not known what the biochemical changes are inside a cell which will eventually lead to Aβ42 aggregation. Thermogenesis has been associated with cellular stress, the latter of which may promote aggregation. We perform intracellular thermometry measurements using fluorescent polymeric thermometers to show that Aβ42 aggregation in live cells leads to an increase in cell-averaged temperatures. This rise in temperature is mitigated upon treatment with an aggregation inhibitor of Aβ42 and is independent of mitochondrial damage that can otherwise lead to thermogenesis. With this, we present a diagnostic assay which could be used to screen small-molecule inhibitors to amyloid proteins in physiologically relevant settings. To interpret our experimental observations and motivate the development of future models, we perform classical molecular dynamics of model Aβ peptides to examine the factors that hinder thermal dissipation. We observe that this is controlled by the presence of ions in its surrounding environment, the morphology of the amyloid peptides, and the extent of its hydrogen-bonding interactions with water. We show that aggregation and heat retention by Aβ peptides are favored under intracellular-mimicking ionic conditions, which could potentially promote thermogenesis. The latter will, in turn, trigger further nucleation events that accelerate disease progression.

A Molecular Dynamics Analysis on Interfacial Thermal Resistance between Particle and Medium in Light-Induced Heat Transfer of Plasmonic Nanofluid

Light-induced heat transfer process of plasmonic nanofluids is critical for many applications, but the energy conversion pathway still remains controversial. In this work, we develop a calculation model based on the combination of the electromagnetic theory and molecular dynamics (MD) simulation to investigate the impact of the localized surface plasmon resonance (LSPR) on the heat transfer between nanoparticles and the surrounding medium in gold and silver nanofluids. It is found that the LSPR-induced enhanced electric field (EEF) can obviously reduce the interfacial thermal resistance to promote the heat transfer process, especially in silver nanofluids. The results reveal that the movement of water molecules can be violently perturbed by the EEF to overcome the binding force of nanoparticles, and therefore the energy transfer process in water molecules can be obviously enhanced. The effect of EEF is significant, especially in the initial heating stages when the temperature of the nanoparticles is relatively low. When the silver nanoparticle temperature is 400 K, the relative reduction ratio of the interfacial thermal resistance can reach 19.0% under the effect of the LSPR-induced EEF. The results also indicate that two different energy conversion mechanisms: photothermal and photoexcited electric-field enhancement are likely to coexist and jointly impact the heat transfer process in plasmonic nanofluids, and the effect of the latter cannot be neglected. This work provides some new insights for a deeper understanding of the light-induced heat transfer process in plasmonic nanofluids.

Spatial Control of Heat Flow at the Nanoscale Using Janus Particles

Janus nanoparticles (JNPs) feature heterogeneous compositions, bringing opportunities in technological and medical applications. We introduce a theoretical approach based on nonequilibrium molecular dynamics simulations and heat transfer continuum theory to investigate the temperature fields generated around heated spherical JNPs covering a wide range of particle sizes, from a few nm to 100 nm. We assess the performance of these nanoparticles to generate anisotropic heating at the nanoscale. We demonstrate that the contrasting interfacial thermal conductances of the fluid-material interfaces arising from the heterogeneous composition of the JNPs can be exploited to control the thermal fields around the nanoparticle, leading to a temperature difference between both sides of the nanoparticle (temperature contrast) that is significant for particles comprising regions with disparate hydrophilicity. We illustrate this idea using coarse-grained and atomistic models of gold nanoparticles with hydrophobic and hydrophilic coatings, in water. Furthermore, we introduce a continuum model to predict the temperature contrast as a function of the interfacial thermal conductance and nanoparticle size. We further show that, unlike homogeneous nanoparticles, the interfacial fluid temperature depends on the interfacial thermal conductance of Janus nanoparticles.

In Silico Prediction of Food Properties: A Multiscale Perspective

Several open software packages have popularized modeling and simulation strategies at the food product scale. Food processing and key digestion steps can be described in 3D using the principles of continuum mechanics. However, compared to other branches of engineering, the necessary transport, mechanical, chemical, and thermodynamic properties have been insufficiently tabulated and documented. Natural variability, accented by food evolution during processing and deconstruction, requires considering composition and structure-dependent properties. This review presents practical approaches where the premises for modeling and simulation start at a so-called “microscopic” scale where constituents or phase properties are known. The concept of microscopic or ground scale is shown to be very flexible from atoms to cellular structures. Zooming in on spatial details tends to increase the overall cost of simulations and the integration over food regions or time scales. The independence of scales facilitates the reuse of calculations and makes multiscale modeling capable of meeting food manufacturing needs. On one hand, new image-modeling strategies without equations or meshes are emerging. On the other hand, complex notions such as compositional effects, multiphase organization, and non-equilibrium thermodynamics are naturally incorporated in models without linearization or simplifications. Multiscale method’s applicability to hierarchically predict food properties is discussed with comprehensive examples relevant to food science, engineering and packaging. Entropy-driven properties such as transport and sorption are emphasized to illustrate how microscopic details bring new degrees of freedom to explore food-specific concepts such as safety, bioavailability, shelf-life and food formulation. Routes for performing spatial and temporal homogenization with and without chemical details are developed. Creating a community sharing computational codes, force fields, and generic food structures is the next step and should be encouraged. This paper provides a framework for the transfer of results from other fields and the development of methods specific to the food domain.

Learning the Hydrophobic, Hydrophilic, and Aromatic Character of Amino Acids from Thermal Relaxation and Interfacial Thermal Conductance

In this study, the thermal relaxation of the 20 naturally occurring amino acids in water and in the protein lysozyme is investigated using transient nonequilibrium molecular dynamics simulations. By modeling the thermal relaxation process, the relaxation times of the amino acids in water occurs over a time scale covering 2-5 ps. For the hydrophobic amino acids, the relaxation time is controlled by the size of the hydrocarbon side chain, while for hydrophilic amino acids, the number of hydrogen bonds does not significantly affect the time scales of the heat dissipation. Our results show that the interfacial thermal conductance at the amino acid-water interface is in the range of 40-80 MW m^-2 K^-1. Hydrophobic and aromatic amino acids tend to have a lower interfacial thermal conductance. Notably, we show that amino acids can be correlated with their thermal relaxation times and molar masses, into simply connected phases with the same hydrophilicity, hydrophobicity, and aromaticity. The thermal relaxation slows down by a factor of up to five in the protein relative to that in water. In the case of the hydrophobic amino acids in the protein lysozyme, the slow down in the thermal relaxation relative to that in water appears to be controlled primarily by the size of the side chain.

Thermal Conductivity of Detonation Nanodiamond Hydrogels and Hydrosols by Direct Heat Flux Measurements

The methodology and results of thermal conductivity measurements by the heat-flow technique for the detonation nanodiamond suspension gels, sols, and powders of several brands in the range of nanoparticle concentrations of 2-100% w/w are discussed. The conditions of assessing the thermal conductivity of the fluids and gels (a FOX 50 heat-flow meter) with the reproducibility (relative standard deviation) of 1% are proposed. The maximum increase of 13% was recorded for the nanodiamond gels (140 mg mL-1 or 4% v/v) of the RDDM brand, at 0.687 ± 0.005 W m-1 K-1. The thermal conductivity of the nanodiamond powders is estimated as 0.26 ± 0.03 and 0.35 ± 0.04 W m-1 K-1 for the RUDDM and RDDM brands, respectively. The thermal conductivity for the aqueous pastes containing 26% v/v RUDDM is 0.85 ± 0.04 W m-1 K-1. The dignities, shortcomings, and limitations of this approach are discussed and compared with the determining of the thermal conductivity with photothermal-lens spectrometry.

Enhanced local viscosity around colloidal nanoparticles probed by equilibrium molecular dynamics simulations

Nanofluids-dispersions of nanometer-sized particles in a liquid medium-have been proposed for a wide variety of thermal management applications. It is known that a solid-like nanolayer of liquid of typical thicknesses of 0.5-1 nm surrounding the colloidal nanoparticles can act as a thermal bridge between the nanoparticle and the bulk liquid. Yet, its effect on the nanofluid viscosity has not been elucidated so far. In this article, we compute the local viscosity of the nanolayer using equilibrium molecular dynamics based on the Green-Kubo formula. We first assess the validity of the method to predict the viscosity locally. We apply this methodology to the calculation of the local viscosity in the immediate vicinity of a metallic nanoparticle for a wide range of solid-liquid interaction strength, where a nanolayer of thickness 1 nm is observed as a result of the interaction with the nanoparticle. The viscosity of the nanolayer, which is found to be higher than its corresponding bulk value, is directly dependent on the solid-liquid interaction strength. We discuss the origin of this viscosity enhancement and show that the liquid density increment alone cannot explain the values of the viscosity observed. Rather, we suggest that the solid-like structure of the distribution of the liquid atoms in the vicinity of the nanoparticle contributes to the nanolayer viscosity enhancement. Finally, we observe a failure of the Stokes-Einstein relation between viscosity and diffusion close to the wall, depending on the liquid-solid interaction strength, which we rationalize in terms of the hydrodynamic slip.

Behavior of Thermally Induced Nanobubbles during Instantaneous Particle Heating by Pulsed Laser Melting in Liquid

Pulsed laser melting in liquid (PLML) is a technique to produce submicrometer spherical particles (SMPs). In this process, raw particles dispersed in liquid are selectively heated, and thermally induced nanobubbles (TINBs) at the particle surface are generated and act as a thermal barrier to enhance the temperature increase during heating. However, monitoring TINBs is difficult since PLML is a low-temperature, nonplasma process. Simple transmittance measurements of monodisperse Au SMP (250 nm) colloidal solutions on a transient time scale were used to monitor the temporal dependence of the TINB thickness and the pressure within the bubble. By applying this technique for ZnO and Sn SMP formation, TINBs in the PLML process are important in promoting the formation of large particles via particle merging during laser heating.

Magnetothermally Activated Nanometer-level Modular Functional Group Grafting of Nanoparticles

Nanoparticles with multifunctionality and high colloidal stability are essential for biomedical applications. However, their use is often hindered by the formation of thick coating shells and/or nanoparticle agglomeration. Herein, we report a single nanoparticle coating strategy to form 1 nm polymeric shells with a variety of chemical functional groups and surface charges. Under exposure to alternating magnetic field, nanosecond thermal energy pulses trigger a polymerization in the region only a few nanometers from the magnetic nanoparticle (MNP) surface. Modular coatings containing functional groups, according to the respective choice of monomers, are possible. In addition, the surface charge can be tuned from negative through neutral to positive. We adopted a coating method for use in biomedical targeting studies where obtaining compact nanoparticles with the desired surface charge is critical. A single MNP with a zwitterionic charge can provide excellent colloidal stability and cell-specific targeting.

Cellular Thermometry Considerations for Probing Biochemical Pathways

Temperature is a fundamental thermodynamic property that can serve as a probe of biochemical reactions. Extracellular thermometry has previously been used to probe cancer metabolism and thermoregulation, with measured temperature changes of ~1-2 K in tissues, consistent with theoretical predictions. In contrast, previous intracellular thermometry studies remain disputed due to reports of >1 K intracellular temperature rises over 5 min or more that are inconsistent with theory. Thus, the origins of such anomalous temperature rises remain unclear. An improved quantitative understanding of intracellular thermometry is necessary to provide a clearer perspective for future measurements. Here, we develop a generalizable framework for modeling cellular heat diffusion over a range of subcellular-to-tissue length scales. Our model shows that local intracellular temperature changes reach measurable limits (>0.1 K) only when exogenously stimulated. On the other hand, extracellular temperatures can be measurable (>0.1 K) in tissues even from endogenous biochemical pathways. Using these insights, we provide a comprehensive approach to choosing an appropriate cellular thermometry technique by analyzing thermogenic reactions of different heat rates and time constants across length scales ranging from subcellular to tissues. Our work provides clarity on cellular heat diffusion modeling and on the required thermometry approach for probing thermogenic biochemical pathways.

Study on preparation, stability, thermal conductivity, and viscosity of silver nanoparticles-decorated three-dimensional graphene-like porous carbon hybrid nanofluids

In the present study, a novel silver nanoparticles-decorated three-dimensional graphene-like porous carbon (Ag/3D GPC) nanocomposite has been synthesized via the method of carbonization and reduction of silver ions at the same time. This Ag/3D GPC nanocomposite possess an interconnected network of well crystalized and submicron-sized macropores with thin graphene walls of several nanometers, where silver nanoparticles distributing uniformly. The water based and ethylene glycol based Ag/3D GPC hybrid nanofluids have been prepared without any surfactant. The hybrid nanofluids with low concentration (<0.8 wt%) can be steadily dispersed for more than six months. The thermal conductivity enhancement for the nanofluids with 0.1 wt% can reach 10.3% and 8.8% at 25 °C compared with pure water and ethylene glycol, respectively. The viscosity of nanofluids is investigated, the temperature dependence of the dynamic viscosity obeys an Arrhenius-like behavior. The prepared Ag/3D GPC hybrid nanofluids with good stability and thermal conductivity are promisingly considered to be used in heat transfer field.

Optomechanical Processing of Silver Colloids: New Generation of Nanoparticle-Polymer Composites with Bactericidal Effect

The properties of materials at the nanoscale open up new methodologies for engineering prospective materials usable in high-end applications. The preparation of composite materials with a high content of an active component on their surface is one of the current challenges of materials engineering. This concept significantly increases the efficiency of heterogeneous processes moderated by the active component, typically in biological applications, catalysis, or drug delivery. Here we introduce a general approach, based on laser-induced optomechanical processing of silver colloids, for the preparation of polymer surfaces highly enriched with silver nanoparticles (AgNPs). As a result, the AgNPs are firmly immobilized in a thin surface layer without the use of any other chemical mediators. We have shown that our approach is applicable to a broad spectrum of polymer foils, regardless of whether they absorb laser light or not. However, if the laser radiation is absorbed, it is possible to transform smooth surface morphology of the polymer into a roughened one with a higher specific surface area. Analyses of the release of silver from the polymer surface together with antibacterial tests suggested that these materials could be suitable candidates in the fight against nosocomial infections and could inhibit the formation of biofilms with a long-term effect.

The role of polarizability in the interfacial thermal conductance at the gold-water interface

We have studied the interfacial thermal conductance, G, of the flat Au(111)-water interface using non-equilibrium molecular dynamics simulations. We utilized two metal models, one based on the embedded atom method (EAM) and the other including metallic polarizability via a density readjusting EAM. These were combined with three popular water models, SPC/E, TIP4P, and TIP4P-FQ, to understand the role of polarizability in the thermal transport process. A thermal flux was introduced using velocity shearing and scaling reverse non-equilibrium molecular dynamics, and transport coefficients were measured by calculating the resulting thermal gradients and temperature differences at the interface. Our primary finding is that the computed interfacial thermal conductance between a bare metal interface and water increases when polarizability is taken into account in the metal model. Additional work to understand the origin of the conductance difference points to changes in the local ordering of the water molecules in the first two layers of water above the metal surface. Vibrational densities of states on both sides of the interface exhibit interesting frequency modulation close to the surface but no obvious differences due to metal polarizability.

Solid-like Behaviors Govern Evaporative Transport in Adsorbed Water Nanofilms

The thermophysical attributes of water molecules confined in a sub-nanometer thickness significantly differ from those in bulk liquid where their molecular behaviors start governing interfacial physics at the nanoscale. In this study, we elucidate nanothin film evaporation by employing a computational approach from a molecular perspective. As the liquid thickness decreases, the solid-like characteristics of adsorbed water nanofilms make the resistance at solid-liquid interfaces or Kapitza resistance significant. Kapitza resistances not only show a strong correlation with the surface wettability but also dominate the overall thermal resistance during evaporation rather than the resistance at evaporating liquid-vapor interfaces. Once the liquid thickness reaches the critical value of 0.5-0.6 nm, the evaporation kinetics is suppressed due to the excessive forces between the liquid and solid atoms. The understanding of molecular-level behaviors explains how a hydrophilic surface plays a role in determining evaporation rates from an atomistic perspective.