Morphology and reactivity of size-selected titanium oxide nanoclusters on Au(111)

On the Nature of HOPG-Supported Pt1Ti2O7 and its Decomposition of a Nerve Agent Simulant: A Cluster Model of a Single Atom Catalyst Active Site

Chemical weapons, including hyper lethal nerve agents, are a persistently looming threat across the modern geopolitical landscape. There is a pressing need for the design and development of improved protective materials, which can be substantially aided by the cultivation of a fundamental molecular-level understanding of candidate systems and the corresponding decomposition chemistry. The emergence of the exciting new class of single atom catalyst (SAC) materials has enhanced the prospect of subnanoscale design tailoring in the hopes of optimizing activity and selectivity for a variety of chemical applications. Here, we apply our recently developed experimental technique for modeling the active sites of such SAC materials through the preparation of surface supported size-selected single metal-atom doped metal oxide clusters. The propensity for an SAC cluster model system for Pt1/TiO2 materials, Pt1Ti2O7 supported on highly oriented pyrolytic graphite (HOPG), to adsorb and decompose nerve agent simulant dimethyl methylphosphonate (DMMP) was investigated through a combination of temperature-programmed desorption/reaction (TPD/R) and X-ray photoelectron spectroscopy (XPS). XPS measurements of the as-prepared Pt1Ti2O7 clusters supported the successful isolation of single Pt atoms in clusters monodispersed across the HOPG surface. TPD/R experiments showed that the reactivity exhibited by the Pt1Ti2O7 clusters was distinct from that of Ti2O7 clusters lacking the single Pt atom. It was found that DMMP decomposed over Pt1Ti2O7 upon heating to as low as room temperature, and higher temperature treatments evolved exclusively H2O, CO, and H2, while decomposition over Ti2O7 evolved only methanol and formaldehyde at elevated temperatures. This indicated the promotion of C-H and PO-C bond cleavage within DMMP due to the presence of single Pt atoms in the clusters. Further, the Pt1Ti2O7 clusters were found to desorb P-containing decomposition species, preventing active site poisoning; however, a change of reactivity reflecting that of Ti2O7 was observed following a single TPD/R cycle. This suggested the encapsulation of active Pt sites by titanium oxide during high temperature treatment and is thus an issue deserving of serious attention in the study of Pt1/Ti2O7 SAC materials.

Preparation of modified humic acid/TiO2/P(AA-co-AM) nanocomposite hydrogels with enhanced dye adsorption and photocatalysis

A novel composite hydrogel with exceptional adsorption and photocatalytic properties was synthesized using modified coal-based humic acid (HA-C), modified titanium dioxide (TiO2) nanoparticles, acrylic acid (AA), and acrylamide (AM) as precursors. The modification of HA-C and TiO2 significantly enhances the structural support provided by the hydrogel for photocatalytic components. Moreover, we investigated the effects of monomer ratio, dye concentration, temperature, and pH on the material properties. Additionally, we tested the mechanical strength, swelling behavior, and reusability of the hydrogels. The composite hydrogel's adsorption performance and synergistic adsorption-photocatalytic performance were evaluated based on its removal rate for both absorbed and degraded methylene blue (MB). Remarkably, incorporating HA-C greatly improved the adsorption efficiency of the composite hydrogel for methylene blue to a maximum capacity of 1490 mg g-1. Furthermore, TiO2 nanoparticles in the structure promoted MB degradation with an efficiency exceeding 96.5%. The hydrogel exhibited excellent recoverability and reusability through nine cycles of adsorption/desorption as well as six cycles of degradation.

Aggregation of Size-Selected Oxide Clusters Deposited onto Au(111)

Kinetic Monte Carlo (kMC) simulations along with density functional theory (DFT) calculations were used to investigate the aggregation of size-selected Nb3Oy (y = 5, 6, 7) clusters deposited onto the Au(111) surface. Recent STM experiments showed that the cluster binding sites and sizes of the cluster assemblies on the Nb3Oy/Au(111) surfaces strongly depend on the stoichiometry of the clusters, i.e., the oxygen-to-niobium ratio. To better understand the origins of these differences, kMC simulations of the nucleation and growth of cluster assemblies were performed using energy barriers for diffusion and intercluster interactions estimated from DFT calculations of cluster binding and dimerization energies, respectively. Comparisons of the kMC simulations with STM images of the as-deposited Nb3Oy/Au(111) surfaces at RT and after high temperature annealing were used to further optimize the energetics and gauge the importance of nearest neighbor interactions. The kMC simulations demonstrate that the assembly of Nb3Oy clusters on Au(111) are largely controlled by the magnitude of the barriers for diffusion and interparticle-bond formation, while changes at higher temperatures are sensitive to the binding energies between nearest neighbors. Simulations for the Nb3O5 and Nb3O6 clusters, which exhibit smaller cluster assembly sizes in STM, required larger diffusion barriers as well as different barriers for interparticle binding, which reflected differences in DFT calculated dimerization energies. The results demonstrate the effectiveness of combined DFT and kMC calculations for understanding how the stoichiometry affects the aggregation of small oxide clusters on a metal surface.

Ultrasmall Cluster Model for Investigating Single Atom Catalysis: Dehydrogenation of 1-Propanamine by Size-Selected Pt1Zr2O7 Clusters Supported on HOPG

The selective dehydrogenation of hydrocarbons and their functionalized derivatives is a promising pathway in the realization of endothermic fuel systems for powering important technologies such as hypersonic aircraft. The recent surge in interest in single atom catalysts (SACs) over the past decade offers the opportunity to achieve the ultimate levels of selectivity through the subnanoscale design tailoring of novel catalysts. Experimental techniques capable of investigating the fundamental nature of the active sites of novel SACs in well-controlled model studies offer the chance to reveal promising insights. We report here an approach to accomplish this through the soft landing of mass-selected, ultrasmall metal oxide cluster ions, in which a single noble metal atom bound to a metal oxide moiety serves as a model SAC active site. This method allows the preparation of model catalysts in which monodispersed neutral SAC model active sites are decorated across an inert electrically conductive support at submonolayer surface coverage, in this case, Pt₁Zr₂O₇ clusters supported on highly oriented pyrolytic graphite (HOPG). The results contained herein show the characterization of the Pt₁Zr₂O₇/HOPG model catalyst by X-ray photoelectron spectroscopy (XPS), along with an investigation of its reactivity toward the functionalized hydrocarbon molecule, 1-propanamine. Through temperature-programmed desorption/reaction (TPD/R) experiments it was shown that Pt₁Zr₂O₇/HOPG decomposes 1-propanamine exclusively into propionitrile and H₂, which desorb at 425 and 550 K, respectively. Conversely, clusters without the single platinum atom, that is, Zr₂O₇/HOPG, exhibited no reactivity toward 1-propanamine. Hence, the single platinum atom in Pt₁Zr₂O₇/HOPG was found to play a critical role in the observed reactivity.

Ensemble representation of catalytic interfaces: soloists, orchestras, and everything in-between

Catalytic systems are complex and dynamic, exploring vast chemical spaces on multiple timescales. In this perspective, we discuss the dynamic behavior of fluxional, heterogeneous thermal and electrocatalysts and the ensembles of many isomers which govern their behavior. We develop a new paradigm in catalysis theory in which highly fluxional systems, namely sub-nano clusters, isomerize on a much shorter timescale than that of the catalyzed reaction, so macroscopic properties arise from the thermal ensemble of isomers, not just the ground state. Accurate chemical predictions can only be reached through a many-structure picture of the catalyst, and we explain the breakdown of conventional methods such as linear scaling relations and size-selected prevention of sintering. We capitalize on the forward-looking discussion of the means of controlling the size of these dynamic ensembles. This control, such that the most effective or selective isomers can dominate the system, is essential for the fluxional catalyst to be practicable, and their targeted synthesis to be possible. It will also provide a fundamental lever of catalyst design. Finally, we discuss computational tools and experimental methods for probing ensembles and the role of specific isomers. We hope that catalyst optimization using chemically informed descriptors of ensemble nature and size will become a new norm in the field of catalysis and have broad impacts in sustainable energy, efficient chemical production, and more.

Adhesion, mobility and aggregation of nanoclusters at surfaces: Ni and Ag on Si, HOPG and graphene

Abstract

An experimental investigation of Ag and Ni nanoparticles (NPs) deposited on Silicon with its native oxide, on highly oriented pyrolytic graphite and on graphene flakes is reported. The NPs were physically synthesized with a magnetron based gas aggregation source and the produced beam was mass-filtered and deposited in vacuum on the substrates. The study was concentrated on the morphology for the different cases, shedding some light on the interaction of pre-formed NPs with surfaces, a crucial aspect both of technological and scientific relevance. The nature of adhesion can be strongly influenced by the intrinsic properties of the surface (like for instance the energetics of interaction between the NP surface atoms and the first layers of the substrate) and/or the extrinsic properties, like the presence of defects, step edges, impurities and other irregularities. After adhesion, the NPs mobility and their mutual interaction are very relevant. In this work, the study was concentrated on NP/surface morphology, by using atomic force microscopy, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy.

Article highlights

Surface structure of mass-selected niobium oxide nanoclusters on Au(111)

The structures formed by the deposition of mass-selected niobium oxide clusters, Nb₃O_y(y = 5, 6, 7), onto Au(111) were studied by scanning tunneling microscopy. The as-deposited Nb₃O₇clusters assemble into large dendritic structures that grow on the terraces as well as extend from the top and bottom of step edges. The Nb₃O₆cluster also forms dendritic assemblies but they are generally much smaller in size. The assemblies are composed of smaller discrete structures (<1 nm) which are likely to be single clusters. The dendritic assemblies for both the Nb₃O₇and Nb₃O₆clusters have fractal dimensions of about 1.7 which is very close to that expected for simple diffusion limited aggregation. Annealing the Nb₃O_7,6/Au(111) surfaces up to 550 K results in changes in assembly sizes and increases in heights, while heating to 700 results in the disruption of the assemblies into smaller structures. By contrast, the as-deposited Nb₃O₅/Au(111) surface at RT exhibits compact cluster structures which become 3D nanoparticles when annealed above 550 K. Differences in the observed surface structures and thermal stability are attributed to differences in metal-oxygen stoichiometry which can influence cluster binding energies, mobility and inter-cluster interactions.

Tuning the shape and crystal phase of TiO2 nanoparticles for catalysis

Synthesis of TiO₂ nanoparticles with tunable shape and crystal phase has attracted considerable attention for the design of highly efficient heterogeneous catalysts. Tailoring the shape of TiO₂, in the crystal phases of anatase, rutile, brookite and TiO₂(B), allows tuning of the atomic configurations on the dominantly exposed facets for maximizing the active sites and regulating the reaction route towards a specific channel for achieving high selectivity. Moreover, the shape and crystal phase of TiO₂ nanoparticles alter their interactions with metal species, which are commonly termed as strong metal-support interactions involving interfacial strain and charge transfer. On the other hand, metal particles, clusters and single atoms interact differently with TiO₂, because of the variation of the electronic structure, while the surface of TiO₂ determines the interfacial bonding via a geometric effect. The dynamic behavior of the metal-titania interfaces, driven by the chemisorption of the reactive molecules at elevated temperatures, also plays a decisive role in elaborating the structure-reactivity relationship.

Binding and stability of MgO monomers on anatase TiO2(101)

In catalysis, MgO is often used to modify the acid-base properties of support oxides and to stabilize supported metal atoms and particles on oxides. In this study, we show how the sublimation of MgO powder can be used to deposit MgO monomers, hither on anatase TiO₂(101). A combination of x-ray electron spectroscopy, high-resolution scanning tunneling microscopy, and density functional theory is employed to gain insight into the MgO monomer binding, electronic and vibrational properties, and thermal stability. In the most stable configuration, the Mg and O of the MgO monomer bind to two surface oxygens and one undercoordinated surface titanium, respectively. The additional binding weakens the Mg-O monomer bond and makes Mg more ionic. The monomers are thermally stable up to 600 K, where the onset of diffusion into the TiO₂ bulk is observed. The monomeric MgO species on TiO₂(101) represent an ideal atomically precise system with modified acid-base properties and will be employed in our future catalytic studies.

Fabrication of TiO2 microspikes for highly efficient intracellular delivery by pulse laser-assisted photoporation

The introduction of foreign cargo into living cells with high delivery efficiency and cell viability is a challenge in cell biology and biomedical research. Here, we demonstrate a nanosecond pulse laser-activated photoporation for highly efficient intracellular delivery using titanium dioxide (TiO₂) microspikes as a substratum. The TiO₂ microspikes were formed on titanium (Ti) substrate using an electrochemical anodization process. Cells were cultured on top of the TiO₂ microspikes as a monolayer, and the biomolecule was added. Due to pulse laser exposure of the TiO₂ microspike–cell membrane interface, the microspikes heat up and induce cavitation bubbles, which rapidly grow, coalesce and collapse to induce explosion, resulting in very strong fluid flow at the cell membrane surface. Thus, the cell plasma membrane disrupts and creates transient nanopores, allowing delivery of biomolecules into cells by a simple diffusion process. By this technique, we successfully delivered propidium iodide (PI) dye in HeLa cells with high delivery efficiency (93%) and high cell viability (98%) using 7 mJ pulse energy at 650 nm wavelength. Thus, our TiO₂ microspike-based platform is compact, easy to use, and potentially applicable for therapeutic and diagnostic purposes.

The introduction of foreign cargo into living cells with high delivery efficiency and cell viability by laser asisted photoporation on TiO₂ microspikes platform.