Transition states, reaction paths, and thermochemistry using the nuclear–electronic orbital analytic Hessian

Optimization of Quantum Nuclei Positions with the Adaptive Nuclear-Electronic Orbital Approach

The use of multicomponent methods has become increasingly popular over the last years. Under this framework, nuclei (commonly protons) are treated quantum mechanically on the same footing as the electronic structure problem. Under the use of atomic-centered orbitals, this can lead to some complications as the ideal location of the nuclear basis centers must be optimized. In this contribution, we propose a straightforward approach to determine the position of such centers within the self-consistent cycle of a multicomponent calculation, making use of individual proton charge centroids. We test the method on model systems including the water dimer, a protonated water tetramer, and a porphine system. Comparing to numerical gradient calculations, the adaptive nuclear-electronic orbital (NEO) procedure is able to converge the basis centers to within a few cents of an Ångström and with less than 0.1 kcal/mol differences in absolute energies. This is achieved in one single calculation and with a small added computational effort of up to 80% compared to a regular NEO- self-consistent field run. An example application for the human transketolase proton wire is also provided.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Nonadiabatic Dynamics of Hydrogen Tunneling with Nuclear-Electronic Orbital Multistate Density Functional Theory

Proton transfer reactions play a critical role in many chemical and biological processes. The development of computationally efficient approaches to describe the quantum dynamics of proton transfer, which often involves hydrogen tunneling, is challenging. Herein, the nuclear-electronic orbital multistate density functional theory (NEO-MSDFT) method is combined with both Ehrenfest and surface hopping nonadiabatic dynamics methods to describe hydrogen tunneling. The NEO-MSDFT method treats the transferring hydrogen nucleus quantum mechanically on the same level as the electrons and incorporates both static and dynamical correlation by mixing localized NEO-DFT solutions with a nonorthogonal configuration interaction scheme. The other nuclei are propagated on the NEO-MSDFT vibronic surfaces during the Ehrenfest or surface hopping dynamics. These methods are applied to proton transfer in malonaldehyde as a prototypical hydrogen tunneling system. The inclusion of vibronically nonadiabatic effects is found to significantly impact the proton transfer time and tunneling dynamics. This approach is applicable to a wide range of other proton transfer reactions.

Analytical gradients for nuclear–electronic orbital multistate density functional theory: Geometry optimizations and reaction paths

Hydrogen tunneling plays a critical role in many biologically and chemically important processes. The nuclear–electronic orbital multistate density functional theory (NEO-MSDFT) method was developed to describe hydrogen transfer systems. In this approach, the transferring proton is treated quantum mechanically on the same level as the electrons within multicomponent DFT, and a nonorthogonal configuration interaction scheme is used to produce delocalized vibronic states from localized vibronic states. The NEO-MSDFT method has been shown to provide accurate hydrogen tunneling splittings for fixed molecular systems. Herein, the NEO-MSDFT analytical gradients for both ground and excited vibronic states are derived and implemented. The analytical gradients and semi-numerical Hessians are used to optimize and characterize equilibrium and transition state geometries and to generate minimum energy paths (MEPs), for proton transfer in the deprotonated acetylene dimer and malonaldehyde. The barriers along the resulting MEPs are lower when the transferring proton is quantized because the NEO-MSDFT method inherently includes the zero-point energy of the transferring proton. Analysis of the proton densities along the MEPs illustrates that the proton density can exhibit symmetric or asymmetric bilobal character associated with symmetric or slightly asymmetric double-well potential energy surfaces and hydrogen tunneling. Analysis of the contributions to the intrinsic reaction coordinate reveals that changes in the C–O bond lengths drive proton transfer in malonaldehyde. This work provides the foundation for future reaction path studies and direct nonadiabatic dynamics simulations of a wide range of hydrogen transfer reactions.

Direct Dynamics with Nuclear-Electronic Orbital Density Functional Theory

Direct dynamics simulations of chemical reactions typically require the selection of a method for generating the potential energy surfaces and a method for the dynamical propagation of the nuclei on these surfaces. The nuclear-electronic orbital (NEO) framework avoids this Born-Oppenheimer separation by treating specified nuclei on the same level as the electrons with wave function methods or density functional theory (DFT). The NEO approach is particularly applicable to proton, hydride, and proton-coupled electron transfer reactions, where the transferring proton(s) and all electrons are treated quantum mechanically. In this manner, the zero-point energy, density delocalization, and anharmonicity of the transferring protons are inherently and efficiently included in the energies, optimized geometries, and dynamics.This Account describes how various NEO methods can be used for direct dynamics simulations on electron-proton vibronic surfaces. The strengths and limitations of these approaches are discussed, and illustrative examples are presented. The NEO-DFT method can be used to simulate chemical reactions on the ground state vibronic surface, as illustrated by the application to hydride transfer in C₄H₉⁺. The NEO multistate DFT (NEO-MSDFT) method is useful for simulating ground state reactions in which the proton density becomes bilobal during the dynamics, a characteristic of hydrogen tunneling, as illustrated by proton transfer in malonaldehyde. The NEO time-dependent DFT (NEO-TDDFT) method produces excited electronic, vibrational, and vibronic surfaces. The application of linear-response NEO-TDDFT to H₂ and H₃⁺, as well as the partially and fully deuterated counterparts, shows that this approach produces accurate fundamental vibrational excitation energies when all nuclei and all electrons are treated quantum mechanically. Moreover, when only specified nuclei are treated quantum mechanically, this approach can be used to optimize geometries on excited state vibronic surfaces, as illustrated by photoinduced single and double proton transfer systems, and to conduct adiabatic dynamics on these surfaces. The real-time NEO-TDDFT method provides an alternative approach for simulating nonequilibrium nuclear-electronic dynamics of such systems. These various NEO methods can be combined with nonadiabatic dynamics methods such as Ehrenfest and surface hopping dynamics to include the nonadiabatic effects between the quantum and classical subsystems. The real-time NEO-TDDFT Ehrenfest dynamics simulation of excited state intramolecular proton transfer in o-hydroxybenzaldehyde illustrates the power of this type of combined approach. The field of multicomponent quantum chemistry is in the early stages, and the methods discussed herein provide the foundation for a wide range of promising future directions to be explored. An appealing future direction is the expansion of the real-time NEO-TDDFT method to describe the dynamics of all nuclei and electrons on the same level. Direct dynamics simulations using NEO wave function methods such as equation-of-motion coupled cluster or multiconfigurational approaches are also attractive but computationally expensive options. The further development of NEO direct dynamics methods will enable the simulation of the nuclear-electronic dynamics for a vast array of chemical and biological processes that extend beyond the Born-Oppenheimer approximation.

One-to-One Correspondence between Reaction Pathways and Reactive Orbitals

The one-to-one correspondence between reaction pathways in the potential energy theory and reactive orbitals in the electronic theory for reactions is presented. In this study, the reactive orbital energy method is applied to the intrinsic reaction coordinates of the global reaction route map generated by an automated reaction path search method. The reactive orbital energy method specifies the pairs of occupied and unoccupied reactive orbitals driving chemical reactions and determines whether the reactions are electron transfer-driven or dynamics-driven. Surprisingly, it is found that the reactive orbital pairs are determined one by one for the electron transfer-driven reaction pathways from an identical molecule. The reactive orbital energy method is also found to provide the sophisticated interpretations of reactions for the electronic motions. This one-to-one correspondence is expected to trigger the unification of the potential energy theory and the electronic theory for reactions that have been independently developed.

Software for the frontiers of quantum chemistry: An overview of developments in the Q-Chem 5 package

This article summarizes technical advances contained in the fifth major release of the Q-Chem quantum chemistry program package, covering developments since 2015. A comprehensive library of exchange-correlation functionals, along with a suite of correlated many-body methods, continues to be a hallmark of the Q-Chem software. The many-body methods include novel variants of both coupled-cluster and configuration-interaction approaches along with methods based on the algebraic diagrammatic construction and variational reduced density-matrix methods. Methods highlighted in Q-Chem 5 include a suite of tools for modeling core-level spectroscopy, methods for describing metastable resonances, methods for computing vibronic spectra, the nuclear-electronic orbital method, and several different energy decomposition analysis techniques. High-performance capabilities including multithreaded parallelism and support for calculations on graphics processing units are described. Q-Chem boasts a community of well over 100 active academic developers, and the continuing evolution of the software is supported by an "open teamware" model and an increasingly modular design.

Nuclear-electronic orbital methods: Foundations and prospects

The incorporation of nuclear quantum effects and non-Born-Oppenheimer behavior into quantum chemistry calculations and molecular dynamics simulations is a longstanding challenge. The nuclear-electronic orbital (NEO) approach treats specified nuclei, typically protons, quantum mechanically on the same level as the electrons with wave function and density functional theory methods. This approach inherently includes nuclear delocalization and zero-point energy in molecular energy calculations, geometry optimizations, reaction paths, and dynamics. It can also provide accurate descriptions of excited electronic, vibrational, and vibronic states as well as nuclear tunneling and nonadiabatic dynamics. Nonequilibrium nuclear-electronic dynamics simulations beyond the Born-Oppenheimer approximation can be used to investigate a wide range of excited state processes. This Perspective provides an overview of the foundational NEO methods and enumerates the prospects for using these methods as building blocks for future developments. The conceptual simplicity and computational efficiency of the NEO approach will enhance its accessibility and applicability to diverse chemical and biological systems.

Analytical Gradients for Nuclear-Electronic Orbital Time-Dependent Density Functional Theory: Excited-State Geometry Optimizations and Adiabatic Excitation Energies

The computational investigation of photochemical processes often entails the calculation of excited-state geometries, energies, and energy gradients. The nuclear-electronic orbital (NEO) approach treats specified nuclei, typically protons, quantum mechanically on the same level as the electrons, thereby including the associated nuclear quantum effects and non-Born-Oppenheimer behavior into quantum chemistry calculations. The multicomponent density functional theory (NEO-DFT) and time-dependent DFT (NEO-TDDFT) methods allow efficient calculations of ground and excited states, respectively. Herein, the analytical gradients are derived and implemented for the NEO-TDDFT method and the associated Tamm-Dancoff approximation (NEO-TDA). The programmable equations for these analytical gradients as well as the NEO-DFT analytical Hessian are provided. The NEO approach includes the anharmonic zero-point energy (ZPE) and density delocalization associated with the quantum protons as well as vibronic mixing in geometry optimizations and energy calculations of ground and excited states. The harmonic ZPE associated with the other nuclei can be computed via the NEO Hessian. This approach is used to compute the 0-0 adiabatic excitation energies for a set of nine small molecules with all protons quantized, exhibiting slight improvement over the conventional electronic approach. Geometry optimizations of two excited-state intramolecular proton-transfer systems, [2,2'-bipyridyl]-3-ol and [2,2'-bipyridyl]-3,3'-diol, are performed with one and two quantized protons, respectively. The NEO calculations for these systems produce electronically excited-state geometries with stronger intramolecular hydrogen bonds and similar relative stabilities compared to conventional electronic methods. This work provides the foundation for nonadiabatic dynamics simulations of fundamental processes such as photoinduced proton transfer and proton-coupled electron transfer.

Molecular vibrational frequencies from analytic Hessian of constrained nuclear-electronic orbital density functional theory

Nuclear quantum effects are important in a variety of chemical and biological processes. The constrained nuclear-electronic orbital density functional theory (cNEO-DFT) has been developed to include nuclear quantum effects in energy surfaces. Herein, we develop the analytic Hessian for cNEO-DFT energy with respect to the change in nuclear (expectation) positions, which can be used to characterize stationary points on energy surfaces and compute molecular vibrational frequencies. This is achieved by constructing and solving the multicomponent cNEO coupled-perturbed Kohn-Sham (cNEO-CPKS) equations, which describe the response of electronic and nuclear orbitals to the displacement of nuclear (expectation) positions. With the analytic Hessian, the vibrational frequencies of a series of small molecules are calculated and compared to those from conventional DFT Hessian calculations as well as those from the vibrational second-order perturbation theory (VPT2). It is found that even with a harmonic treatment, cNEO-DFT significantly outperforms DFT and is comparable to DFT-VPT2 in the description of vibrational frequencies in regular polyatomic molecules. Furthermore, cNEO-DFT can reasonably describe the proton transfer modes in systems with a shared proton, whereas DFT-VPT2 often faces great challenges. Our results suggest the importance of nuclear quantum effects in molecular vibrations, and cNEO-DFT is an accurate and inexpensive method to describe molecular vibrations.

Multicomponent Unitary Coupled Cluster and Equation-of-Motion for Quantum Computation

The variational quantum eigensolver (VQE) algorithm combined with the unitary coupled cluster (UCC) ansatz has been developed for the quantum computation of molecular energies and wave functions within the Born-Oppenheimer approximation. Herein, this approach is extended to multicomponent systems to enable the quantum mechanical treatment of more than one type of particle, such as electrons and positrons or electrons and nuclei, without invoking the Born-Oppenheimer approximation. Specifically, we introduce the multicomponent unitary coupled cluster (mcUCC) method combined with the VQE algorithm for the calculation of ground-state energies and wave functions as well as the multicomponent equation-of-motion (mcEOM) method for the calculation of excitation energies. These methods are developed within the nuclear-electronic orbital (NEO) framework and are formulated in the qubit basis to enable implementations on quantum computers. Moreover, these methods are used to calculate the ground-state energy and excitation energies of positronium hydride, where both electrons and the positron are treated quantum mechanically, as well as the H₂ molecule, where both electrons and one proton are treated quantum mechanically. These applications validate the implementation and provide benchmark data for future calculations. The errors due to Trotterization of the mcUCC ansatz are also analyzed. This formalism, as well as the accompanying computer code, will serve as the basis for applications to more complex multicomponent systems, such as simulations of photoinduced nonadiabatic molecular processes, on both classical and quantum computers.