The property-governed activity of silver-modified titania photocatalysts: The influence of titania matrix

Synergistic adsorption and photocatalysis study of TiO2 and activated carbon composite

The discharge of organic pollutants by the textile and dyeing industries presents an escalating threat to aquatic environments, necessitating the development of effective remediation strategies. This study introduces the utilization of graphite-like structured activated carbon (AC), derived from highland barley straw-a biomass unique to the Plateau regions of China, including Tibet, Qinghai, and Gansu-as a support material for the TiO2 catalyst. TiO2/AC composites with different TiO2 loadings were synthesized by ultrasonic impregnation. The TiO2/AC composites were found to be polycrystalline materials composed of anatase and rutile phases. The TiO2 nanoparticles are well-dispersed over the surface of the AC. The photocatalytic activity of these composites was evaluated through their capacity to degrade a methylene blue (MB) solution upon irradiation. It was observed that the inclusion of TiO2 increases the number of adsorption sites and active sites for methylene blue, with the photocatalytic activity being notably higher at a 3-wt% TiO2 loading, achieving a remarkable 99.6 % degradation efficiency for 100 mg/L MB within 100 min. The experimental kinetic data for the photocatalytic process follow the pseudo-first-order kinetic model. Furthermore, TiO2/AC retains high photocatalytic activity after five reaction cycles. This research provides valuable insights into the application of biomass-derived materials for the purification of water, offering a sustainable solution to both pollution and agricultural waste challenges in Plateau areas of China.

Property-governed performance of platinum-modified titania photocatalysts

Titania is probably the most widely investigated semiconductor photocatalyst because of various advantages, such as high activity, thermal and chemical stability, low price, abundance, and negligible toxicity. However, pristine titania is also characterized by charge carriers’ recombination, and thus lower quantum yields of photocatalytic reactions than theoretical 100%. Moreover, its wide bandgap, despite being recommended for excellent redox properties, means also inactivity under visible part of solar radiation. Accordingly, titania has been surface modified, doped and coupled with various elements/compounds. For example, platinum deposited on the surface of titania has shown to improve both UV activity and the performance under vis. Although the studies on titania modification with platinum started almost half a century ago, and huge number of papers have been published up to now, it is unclear which properties are the most crucial and recommended to obtain highly efficient photocatalyst. In the literature, the opposite findings could be found on the property-governed activities that could result from huge differences in the reaction systems, and also examined photocatalysts. Considering the platinum properties, its content, the size of nanoparticles and the oxidation state, must be examined. Obviously, the characteristics of titania also influence the resultant properties of deposited platinum, and thus the overall photocatalytic performance. Although so many reports on Pt/TiO₂ have been published, it is hardly possible to give indispensable advice on the recommended properties. However, it might be concluded that usually fine platinum NPs uniformly deposited on the titania surface result in high photocatalytic activity, and thus in the low optimal content of necessary platinum. Moreover, the aggregation of titania particles might also help in the lowering the necessary platinum amount (even to 0.2 wt%) due to the interparticle electron transfer mechanism between titania particles in one aggregate. In respect of platinum state, it is thought that it is highly substrate-specific case, and thus either positively charged or zero valent platinum is the most recommended. It might be concluded that despite huge number of papers published on platinum-modified titania, there is still a lack of comprehensive study showing the direct correlation between only one property and the resultant photocatalytic activity.

TiO2/Au/TiO2 Plasmonic Photocatalysts: The Influence of Titania Matrix and Gold Properties

Plasmonic photocatalysts have gained more and more attention because of possible applications for solar energy conversion, environmental decontamination, and water treatment. However, the activity under visible light is usually very low, and the property-governed activity as well as the mechanisms are not fully understood yet. Accordingly, this study examines four different titania photocatalysts (anatase and rutile with fine and large crystallites) modified with gold by photodeposition. Three kinds of samples were prepared, as follows: (i) gold-modified titania (Au/TiO2), (ii) physically mixed Au/TiO2 samples (Au/TiO2(1) + Au/TiO2(2)), and (iii) Au/(TiO2(1) + Au/TiO2(2)) samples, prepared by subsequent deposition of gold on the mixture of bare and gold-modified titania. In total, twelve samples were prepared and well characterized, including diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning transmission electron microscopy (STEM). The photocatalytic activity was examined in three reaction systems: (i) methanol dehydrogenation during gold photodeposition under UV/vis irradiation, (ii) oxidative decomposition of acetic acid (UV/vis), and (iii) oxidation of 2-propanol to acetone under visible light irradiation (λ > 450 nm). It was found that during subsequent deposition, gold is mainly formed on the surface of pre-deposited Au nanoparticles (NPs), localized on fine titania NPs, through the electrostatic attractions (negatively charged gold resulting from photogenerated electrons’ accumulation). This gold aggregation, though detrimental for UV activity (many “naked” large titania with low activity), is highly beneficial for vis activity because of efficient light harvesting and increased interface between gold and titania (gold deposits surrounded by fine titania NPs). Moreover, it was found that rutile is more active than anatase for plasmonic photocatalysis, probably due to easier electron transfer from gold via titania to adsorbed oxygen (more negative conduction band), which might hinder the back reaction (electron transfer: Au→TiO2→Au).