Investigation of Thermodynamic, Kinetic, and Isothermal Parameters for the Selective Adsorption of Bisphenol A

Herein, a novel imprinted solid-phase extraction cartridge was fabricated to investigate the kinetic, thermodynamic, and isothermal parameters for the selective adsorption of Bisphenol A (BPA). The imprinted polymeric cartridges (BMC) for the BPA adsorption were fabricated in the presence of a template and functional monomer using the in situ polymerization technique. To prove the efficiency and selectivity of BMC, the nonimprinted polymeric cartridges (BNC) and the empty polymeric cartridges (EC) were also fabricated with and without functional monomer using the same manner for the preparation of BMC. The characterization of cartridges was performed by elemental analysis, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area measurements, and swelling tests. BPA removal studies were performed by analyzing some parameters such as temperature, BPA concentration, flow rate, salt type, and concentration. The highest capacity was determined as 103.2 mg BPA/g polymer for a 0.75 mL/min flow rate of 0.75 M (NH₄)₂SO₄ containing 200 mg/L BPA solution at 50 °C. NaOH (1.0 M) was used as a desorption agent. The reusability performance was examined by performing 10 consecutive cycles. The solid-phase extraction (SPE) performance was also checked to determine the enrichment and extraction recovery factors for tap water and synthetic wastewater samples. Temkin, Langmuir, Freundlich, and Dubinin-Radushkevich isotherm models were applied to BPA adsorption data examining the adsorption mechanism, surface properties, and adsorption degree. The most suitable isotherm model for BPA adsorption was determined as the Langmuir isotherm model. The thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were investigated to reveal the thermodynamics of adsorption. Adsorption thermodynamic parameters (ΔH°, ΔS°, and ΔG°) were calculated using the thermodynamic equilibrium constant (thermodynamic equilibrium constant, K°) values that change with temperature. It was determined that BPA adsorption was spontaneous (ΔG° < 0) and endothermic (ΔH° > 0) and entropy increased (ΔS° > 0) at the temperatures studied in the BPA adsorption process. The rate control step in the adsorption process was examined by applying pseudo-first-order and pseudo-second-order kinetic models to the adsorption data for the investigations of BPA adsorption kinetics, and the pseudo-second-order kinetic model was found to be more suitable for describing BPA adsorption kinetics. In examining the selectivity of cartridges, structural analogues of hydroquinone, phenol, β-estradiol, and 8-hydroxyquinoline were tested.

Mesoporous Networks of N-Vinylpyrrolidone with (di)Methacrylates as Precursors of Ecological Molecular Imprinted Polymers

Mesoporous polymer networks were prepared via the cross-linking radical copolymerization of non-toxic hydrophilic N-vinylpyrrolidone (VP) with triethylene glycol dimethacrylate (TEGDM) and poly(ethylene glycol) methyl ester methacrylate (PEGMMA) in bulk, using appropriate soluble and thermodynamically compatible macromolecular additives with a branched structure as porogens. The branched copolymers of various monomer compositions were obtained by radical copolymerization in toluene, controlled by 1-decanethiol, and these materials were characterized by a wide set of physical chemical methods. The specific surface areas and surface morphology of the polymer networks were determined by nitrogen low-temperature adsorption or Rose Bengal (RB) sorption, depending on the copolymer compositions and scanning electron microscopy. The electrochemical properties of RB before and after its encapsulation into a branched VP copolymer were studied on a glassy carbon electrode and the interaction between these substances was observed. Quantum chemical modeling of RB-VP or RB-copolymer complexes has been carried out and sufficiently strong hydrogen bonds were found in these systems. The experimental and modeling data demonstrate the high potency of such mesoporous polymer networks as precursors of molecularly imprinted polymers for the recognition of fluorescent dyes as nanomarkers for biomedical practice.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

Macroporous Polymer Monoliths in Thin Layer Format

Nowadays, macroporous polymer monoliths represent widely used stationary phases for a number of dynamic interphase mass exchange processes such as high-performance liquid chromatography, gas chromatography, electrochromatography, solid-phase extraction, and flow-through solid-state biocatalysis. This review represents the first summary in the field of current achievements on the preparation of macroporous polymer monolithic layers, as well as their application as solid phases for thin-layer chromatography and different kinds of microarray.

Flow-Through Macroporous Polymer Monoliths Containing Artificial Catalytic Centers Mimicking Chymotrypsin Active Site

Synthetic catalysts that could compete with enzymes in term of the catalytic efficiency but surpass them in stability have a great potential for the practical application. In this work, we have developed a novel kind of organic catalysts based on flow-through macroporous polymer monoliths containing catalytic centers that mimic the catalytic site of natural enzyme chymotrypsin. It is known that chymotrypsin catalytic center consists of L-serine, L-histidine, and L-aspartic acid and has specificity to C-terminal residues of hydrophobic amino acids (L-phenylalanine, L-tyrosine, and L-tryptophan). In this paper, we have prepared the macroporous polymer monoliths bearing grafted polymer layer on their surface. The last one was synthesized via copolymerization of N-methacryloyl-L-serine, N-methacryloyl-L-histidine, and N-methacryloyl-L-aspartic acid. The spatial orientation of amino acids in the polymer layer, generated on the surface of monolithic framework, was achieved by coordinating amino acid-polymerizable derivatives with cobalt (II) ions without substrate-mimicking template and with its use. The conditions for the preparation of mimic materials were optimized to achieve a mechanically stable system. Catalytic properties of the developed systems were evaluated towards the hydrolysis of ester bond in a low molecular substrate and compared to the results of using chymotrypsin immobilized on the surface of a similar monolithic framework. The effect of flow rate increase and temperature elevation on the hydrolysis efficiency were evaluated for both mimic monolith and column with immobilized enzyme.

Cryostructuring of Polymeric Systems †: Application of Deep Neural Networks for the Classification of Structural Features Peculiar to Macroporous Poly(vinyl alcohol) Cryogels Prepared without and with the Additives of Chaotropes or Kosmotropes

Macroporous poly(vinyl alcohol) cryogels (PVACGs) are physical gels formed via cryogenic processing of polymer solutions. The properties of PVACGs depend on many factors: the characteristics and concentration of PVA, the absence or presence of foreign solutes, and the freezing-thawing conditions. These factors also affect the macroporous morphology of PVACGs, their total porosity, pore size and size distribution, etc. In this respect, there is the problem with developing a scientifically-grounded classification of the morphological features inherent in various PVACGs. In this study PVA cryogels have been prepared at different temperatures when the initial polymer solutions contained chaotropic or kosmotropic additives. After the completion of gelation, the rigidity and heat endurance of the resultant PVACGs were evaluated, and their macroporous structure was investigated using optical microscopy. The images obtained were treated mathematically, and deep neural networks were used for the classification of these images. Training and test sets were used for their classification. The results of this classification for the specific deep neural network architecture are presented, and the morphometric parameters of the macroporous structure are discussed. It was found that deep neural networks allow us to reliably classify the type of additive or its absence when using a combined dataset.

Cryostructuring of Polymeric Systems. 55. Retrospective View on the More than 40 Years of Studies Performed in the A.N.Nesmeyanov Institute of Organoelement Compounds with Respect of the Cryostructuring Processes in Polymeric Systems

The processes of cryostructuring in polymeric systems, the techniques of the preparation of diverse cryogels and cryostructurates, the physico-chemical mechanisms of their formation, and the applied potential of these advanced polymer materials are all of high scientific and practical interest in many countries. This review article describes and discusses the results of more than 40 years of studies in this field performed by the researchers from the A.N.Nesmeyanov Institute of Organoelement Compounds, Russian Academy of Sciences-one of the key centers, where such investigations are carried out. The review includes brief historical information, the description of the main effects and trends characteristic of the cryostructuring processes, the data on the morphological specifics inherent in the polymeric cryogels and cryostructurates, and examples of their implementation for solving certain applied tasks.

Molecularly imprinted nanoparticles based plasmonic sensors for real-time Enterococcus faecalis detection

Human fecal contamination poses a crucial environmental and health threat in recent years, resulting in the difficulties of access to clean water. According to the World Health Organization, several fecal bacteria, particularly Enterococci species, are present in human intestinal flora. Enterococcus faecalis (E. faecalis) is one of the indicator bacteria that have been utilized as a pollution indicator in water. However, existing technologies and detection strategies face multiple challenges in terms of low affinity for detection and labelling requirements that limit their access to large scale applications. Here, we present a label-free molecular fingerprinting strategy on a plasmonic sensor to detect E. fecalis from aqueous and seawater samples. The kinetic performance of platform was comprehensively evaluated and the platform provided four orders of magnitude detection range with a low limit of detection (down to ~100 bacteria/mL) and a high correlation coefficient value (> 0.99) in the range of 2 × 10⁴-1 × 10⁸ cfu/mL. The platform also denoted a selectivity and specificity while other bacteria (E. coli, B. subtilis, and S. aureus) samples were applied. Multiple time use and relatively long shelf-life are superior to the existing modality. The presented method is one of the fascinating surface modification technique that utilizes biotarget as a recognition element itself, providing a broad range of versatility to replica other biotargets with different molecular structure, size, and physicochemical properties. Such a reliable and versatile platform would hold potential applications from microbiome characterization to forensics by revitalizing obsolescent detection strategies.

Cholesterol-imprinted macroporous monoliths: Preparation and characterization

The development of sorbents for selective binding of cholesterol, which is a risk factor for cardiovascular disease, has a great importance for analytical science and medicine. In this work, two series of macroporous cholesterol-imprinted monolithic sorbents differing in the composition of functional monomers (methacrylic acid, butyl methacrylate, 2-hydroxyethyl methacrylate and ethylene dimethacrylate), amount of a template (4, 6 and 8 mol%) used for molecular imprinting, as well as mean pore size were synthesized by in situ free-radical process in stainless steel housing of 50 mm × 4.6 mm i.d. All prepared materials were characterized regarding to their hydrodynamic permeability and porous properties, as well as examined by BET and SEM methods. Imprinting factors, apparent dynamic dissociation constants, the maximum binding capacity, the number of theoretical plates and the height equivalent to a theoretical palate of MIP monoliths at different mobile phase flow rates were determined. The separation of a mixture of structural analogues, namely, cholesterol and prednisolone, was demonstrated. Additionally, the possibility of using the developed monoliths for cholesterol solid-phase extraction from simulated biological solution was shown.

Receptor-ligand interactions: Advanced biomedical applications

Receptor-ligand interactions (RLIs) are at the base of all biological events occurring in living cells. The understanding of interactions between complementary macromolecules in biological systems represents a high-priority research area in bionanotechnology to design the artificial systems mimicking natural processes. This review summarizes and analyzes RLIs in some cutting-edge biomedical fields, in particular, for the preparation of novel stationary phases to separate complex biological mixtures in medical diagnostics, for the design of ultrasensitive biosensors for identification of biomarkers of various diseases at early stages, as well as in the development of innovative biomaterials and approaches for regenerative medicine. All these biotechnological fields are closely related, because their success depends on a proper choice, combination and spatial disposition of the single components of ligand-receptor pairs on the surface of appropriately designed support.